omap: i2c: Add calls for pinctrl state select
Subsystems (4)
PATCH v2 1/1 omap: i2c: Add calls for pinctrl state select
From: Pascal Huerst <[email protected]>
This adds calls to pinctrl subsystem in order to switch pin states on suspend/resume if you provide a "sleep" state in DT.
--- drivers/i2c/busses/i2c-omap.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/i2c/busses/i2c-omap.c +5 -0
@@ -38,6 +38,7 @@#include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/consumer.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20
@@ -1423,6 +1424,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)omap_i2c_read_reg (_dev,OMAP_I2C_STAT_REG ); } +pinctrl_pm_select_sleep_state (dev); +return 0 ; }
@@ -1431,6 +1434,8 @@ static int omap_i2c_runtime_resume(struct device *dev)struct platform_device *pdev =to_platform_device (dev);struct omap_i2c_dev *_dev =platform_get_drvdata (pdev); +pinctrl_pm_select_default_state (dev); +if (!_dev->regs)return 0 ;
--
2.1.0
few nitpicks:
i2c: omap: in $subject instead of omap: i2c:
I usually would do:
git log --no-merges --oneline drivers/i2c/busses/i2c-omap.c and look for common usage.
Quoted 41 lines · On 04/22/2015 04:07 AM, [email protected] wrote:
From: Pascal Huerst <[email protected]>
This adds calls to pinctrl subsystem in order to switch pin states on suspend/resume if you provide a "sleep" state in DT.
Signed-off-by Pascal Huerst <[email protected]>--- drivers/i2c/busses/i2c-omap.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/i2c/busses/i2c-omap.c +5
-1@@ -38,6 +38,7 @@#include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/consumer.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20@@ -1423,6 +1424,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)omap_i2c_read_reg (_dev,OMAP_I2C_STAT_REG ); } +pinctrl_pm_select_sleep_state (dev); +return 0 ; }@@ -1431,6 +1434,8 @@ static int omap_i2c_runtime_resume(struct device *dev)struct platform_device *pdev =to_platform_device (dev);struct omap_i2c_dev *_dev =platform_get_drvdata (pdev); +pinctrl_pm_select_default_state (dev); +if (!_dev->regs)return 0 ; --
Quoted 2 lines
2.1.0
Build tested with omap2plus_defconfig on linus master (27cf3a16b253) and next-20150422
While I do understand that the sleep state and default states are optional - might be nice to state it in commit message (as a result of which we dont do error checks).
Would you think adding relevant documentation in Documentation/devicetree/bindings/i2c/i2c-omap.txt might be good as well? I mean, folks should know looking at dt documentation that this bus driver does indeed support this option..
Signature · 2 lines
Regards, Nishanth Menon
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 5 lines · Nishanth Menon
few nitpicks:
i2c: omap: in $subject instead of omap: i2c:
I usually would do:
git log --no-merges --onelinedrivers/i2c/busses/i2c-omap.cand look for common usage.
Aargh, thanks for pointing that out, I'll fix that.
Quoted 41 lines · On 04/22/2015 04:07 AM, [email protected]…
Quoted 40 lines
From: Pascal Huerst <[email protected]>
This adds calls to pinctrl subsystem in order to switch pin states on suspend/resume if you provide a "sleep" state in DT.
Signed-off-by Pascal Huerst <[email protected]>--- drivers/i2c/busses/i2c-omap.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/i2c/busses/i2c-omap.c +5
-0@@ -38,6 +38,7 @@#include <linux/slab.h> #include <linux/i2c-omap.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/consumer.h> /* I2C controller revisions */ #define OMAP_I2C_OMAP1_REV_2 0x20@@ -1423,6 +1424,8 @@ static int omap_i2c_runtime_suspend(struct device *dev)omap_i2c_read_reg (_dev,OMAP_I2C_STAT_REG ); } +pinctrl_pm_select_sleep_state (dev); +return 0 ; }@@ -1431,6 +1434,8 @@ static int omap_i2c_runtime_resume(struct device *dev)struct platform_device *pdev =to_platform_device (dev);struct omap_i2c_dev *_dev =platform_get_drvdata (pdev); +pinctrl_pm_select_default_state (dev); +if (!_dev->regs)return 0 ;
Quoted 8 lines
Quoted 3 lines
--
2.1.0Build tested with
omap2plus_defconfigon linus master (27cf3a16b253) and next-20150422
While I do understand that the sleep state and default states are optional - might be nice to state it in commit message (as a result of which we dont do error checks).
Thanks for testing. I'll fix the commit message and send in v3.
Quoted 4 lines
Would you think adding relevant documentation in
Documentation/devicetree/bindings/i2c/i2c-omap.txtmight be good as well? I mean, folks should know looking at dt documentation that this bus driver does indeed support this option..
I'm not sure about that. Actually this is all handled by the pinctrl subsystem, so I would guess that documentation belongs there, since in:
Documentation/devicetree/bindings/i2c/i2c-at91.txt Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
is no documentation about that as well. But there is documentation in:
Documentation/pinctrl.txt
right? Otherwise, I would say we should add documentation for all devices, so it is consistent.
On 04/28/2015 06:05 AM, Pascal Huerst wrote:
[...]
Quoted 1 line · Nishanth Menon
[...]
Quoted 11 lines
Quoted 4 lines
Would you think adding relevant documentation in
Documentation/devicetree/bindings/i2c/i2c-omap.txtmight be good as well? I mean, folks should know looking at dt documentation that this bus driver does indeed support this option..I'm not sure about that. Actually this is all handled by the pinctrl subsystem, so I would guess that documentation belongs there, since in:
Documentation/devicetree/bindings/i2c/i2c-at91.txtDocumentation/devicetree/bindings/i2c/i2c-nomadik.txt
Quoted 6 lines
is no documentation about that as well. But there is documentation in:
Documentation/pinctrl.txtright? Otherwise, I would say we should add documentation for all devices, so it is consistent.
that is probably good since drivers may or maynot support support the sleep configuration.
Signature · 2 lines
Regards, Nishanth Menon
On 04/28/2015 06:05 AM, Pascal Huerst wrote:
[...]
Quoted 1 line · Nishanth Menon
[...]
Quoted 11 lines
Quoted 4 lines
Would you think adding relevant documentation in
Documentation/devicetree/bindings/i2c/i2c-omap.txtmight be good as well? I mean, folks should know looking at dt documentation that this bus driver does indeed support this option..I'm not sure about that. Actually this is all handled by the pinctrl subsystem, so I would guess that documentation belongs there, since in:
Documentation/devicetree/bindings/i2c/i2c-at91.txtDocumentation/devicetree/bindings/i2c/i2c-nomadik.txt
Quoted 6 lines
is no documentation about that as well. But there is documentation in:
Documentation/pinctrl.txtright? Otherwise, I would say we should add documentation for all devices, so it is consistent.
that is probably good since drivers may or maynot support the sleep configuration.
Signature · 2 lines
Regards, Nishanth Menon