ASoC: Correct typo in SOC_VALUE_ENUM_SINGLE macro
Subsystems (3)
PATCH v2 1/5 ASoC: Correct typo in SOC_VALUE_ENUM_SINGLE macro
xnitmes is clearly intended to be xnitems, but all other macros just refer to this as xitems, so change it to that.
---
Changes since v1:
- Use first entry of values array as off value for the mux
Thanks,
Charles
include/sound/soc.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
include/sound/soc.h +2 -2
@@ -190,8 +190,8 @@#define SOC_VALUE_ENUM_DOUBLE (xreg, xshift_l, xshift_r, xmask, xitems, xtexts, xvalues) \ { .reg = xreg, .shift_l = xshift_l, .shift_r = xshift_r, \ .mask = xmask, .items = xitems, .texts = xtexts, .values = xvalues} -#define SOC_VALUE_ENUM_SINGLE (xreg, xshift, xmask, xnitmes, xtexts, xvalues) \ - SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xnitmes, xtexts, xvalues) +#define SOC_VALUE_ENUM_SINGLE (xreg, xshift, xmask, xitems, xtexts, xvalues) \ + SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xitems, xtexts, xvalues)#define SOC_ENUM_SINGLE_VIRT (xitems, xtexts) \ SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, xitems, xtexts)#define SOC_ENUM (xname, xenum) \
Signature · 1 line
1.7.2.5
PATCH v2 2/5 ASoC: dapm: Remove local OOM error message
The memory subsystem is pretty chatty on failure no need to have local OOM messages as well.
--- sound/soc/soc-dapm.c | 6 +----- 1 files changed, 1 insertions(+), 5 deletions(-)
sound/soc/soc-dapm.c +1 -5
@@ -310,12 +310,8 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget,struct soc_mixer_control *mc; data =kzalloc (sizeof (*data),GFP_KERNEL ); -if (!data) { -dev_err (widget->dapm->dev, -"ASoC: can't allocate kcontrol data for %s\n" , - widget->name); +if (!data)return -ENOMEM ; - }INIT_LIST_HEAD (&data->paths);
Signature · 1 line
1.7.2.5
PATCH v2 3/5 ASoC: dapm: Append "Autodisable" to autodisable widget names
In reply to Charles KeepaxThis makes it a little easier to follow what is happening in debugfs. Additionally is also useful in facilitating work to add autodisable muxes because the control name is already used for the mux widget and thus shouldn't be reused for the autodisable widget.
--- sound/soc/soc-dapm.c | 22 +++++++++++++++++++--- 1 files changed, 19 insertions(+), 3 deletions(-)
sound/soc/soc-dapm.c +19 -3
@@ -308,11 +308,19 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, {struct dapm_kcontrol_data *data;struct soc_mixer_control *mc; +const char *name; +int ret; data =kzalloc (sizeof (*data),GFP_KERNEL );if (!data)return -ENOMEM ; + name =kasprintf (GFP_KERNEL ,"%s %s" , kcontrol->id.name,"Autodisable" ); +if (!name) { + ret = -ENOMEM ; + goto err_data; + } +INIT_LIST_HEAD (&data->paths);switch (widget->id) {
@@ -334,15 +342,15 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, template.off_val =0 ; template.on_val = template.off_val; template.id = snd_soc_dapm_kcontrol; - template.name = kcontrol->id.name; + template.name = name; data->value = template.on_val; data->widget =snd_soc_dapm_new_control (widget->dapm, &template);if (!data->widget) { -kfree (data); -return -ENOMEM ; + ret = -ENOMEM ; + goto err_name; } }break ;
@@ -353,11 +361,19 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, kcontrol->private_data = data;return 0 ; + +err_name: +kfree (name); +err_data: +kfree (data); +return ret; }static void dapm_kcontrol_free (struct snd_kcontrol *kctl) {struct dapm_kcontrol_data *data =snd_kcontrol_chip (kctl); +if (data->widget) +kfree (data->widget->name);kfree (data->wlist);kfree (data); }
Signature · 1 line
1.7.2.5
Re: [PATCH v2 3/5] ASoC: dapm: Append "Autodisable" to autodisable widget names
Quoted 6 lines · Charles Keepax
sound/soc/soc-dapm.c +0
-0@@ -308,11 +308,19 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, {
sound/soc/soc-dapm.c static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, · line 318
Quoted 10 lines
sound/soc/soc-dapm.c +3
-0struct dapm_kcontrol_data *data;struct soc_mixer_control *mc; +const char *name; +int ret; data =kzalloc (sizeof (*data),GFP_KERNEL );if (!data)return -ENOMEM ; + name =kasprintf (GFP_KERNEL ,"%s %s" , kcontrol->id.name,"Autodisable" );
We should only allocate the name if we create a widget, otherwise we are going to leak the memory.
Quoted 7 lines
sound/soc/soc-dapm.c +5
-0+if (!name) { + ret = -ENOMEM ; + goto err_data; + } +INIT_LIST_HEAD (&data->paths);
PATCH v2 4/5 ASoC: dapm: Add support for autodisable mux controls
In reply to Charles KeepaxCommit 57295073b6ac ("ASoC: dapm: Implement mixer input auto-disable") added support for autodisable controls, controls whose values are only written to the hardware when their respective widgets are powered up. But it only added support for controls based on the mixer abstraction.
This patch add support for mux controls (DAPM controls based on the enum abstraction) to be auto-disabled as well. As each mux can only have a single control, there is no need to tie the autodisable widget to the inputs (as is done for the mixer controls) it can be tided directly to the mux widget itself.
Note that it is assumed that the first entry in a autodisable mux control will always represent the off state for the mux and is what the mux will be set to whilst it is disabled.
--- include/sound/soc.h | 10 ++++++++ sound/soc/soc-dapm.c | 62 +++++++++++++++++++++++++++++++++++++------------ 2 files changed, 57 insertions(+), 15 deletions(-)
include/sound/soc.h +10 -0
@@ -192,6 +192,10 @@ .mask = xmask, .items = xitems, .texts = xtexts, .values = xvalues}#define SOC_VALUE_ENUM_SINGLE (xreg, xshift, xmask, xitems, xtexts, xvalues) \ SOC_VALUE_ENUM_DOUBLE(xreg, xshift, xshift, xmask, xitems, xtexts, xvalues) +#define SOC_VALUE_ENUM_SINGLE_AUTODISABLE (xreg, xshift, xmask, xitems, xtexts, xvalues) \ +{ .reg = xreg, .shift_l = xshift, .shift_r = xshift, \ + .mask = xmask, .items = xitems, .texts = xtexts, \ + .values = xvalues, .autodisable = 1}#define SOC_ENUM_SINGLE_VIRT (xitems, xtexts) \ SOC_ENUM_SINGLE(SND_SOC_NOPM, 0, xitems, xtexts)#define SOC_ENUM (xname, xenum) \
@@ -312,6 +316,11 @@ ARRAY_SIZE(xtexts), xtexts, xvalues)#define SOC_VALUE_ENUM_SINGLE_DECL (name, xreg, xshift, xmask, xtexts, xvalues) \ SOC_VALUE_ENUM_DOUBLE_DECL(name, xreg, xshift, xshift, xmask, xtexts, xvalues) + +#define SOC_VALUE_ENUM_SINGLE_AUTODISABLE_DECL (name, xreg, xshift, xmask, xtexts, xvalues) \ + const struct soc_enum name = SOC_VALUE_ENUM_SINGLE_AUTODISABLE(xreg, \ + xshift, xmask, ARRAY_SIZE(xtexts), xtexts, xvalues) +#define SOC_ENUM_SINGLE_VIRT_DECL (name, xtexts) \ const struct soc_enum name = SOC_ENUM_SINGLE_VIRT(ARRAY_SIZE(xtexts), xtexts)
@@ -1200,6 +1209,7 @@ struct soc_enum {unsigned int mask;const char *const *texts;const unsigned int *values; + unsigned int autodisable:1; };/**
sound/soc/soc-dapm.c +47 -15
118 lines not on this page · raw message
Signature · 1 line
1.7.2.5
Re: [PATCH v2 4/5] ASoC: dapm: Add support for autodisable mux controls
On 04/30/2015 06:38 PM, Charles Keepax wrote:
[...]
Quoted 5 lines
sound/soc/soc-dapm.c +1
-0@@ -354,6 +355,34 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, } }break ; +case snd_soc_dapm_mux:
sound/soc/soc-dapm.c static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, · line 368
Quoted 10 lines
sound/soc/soc-dapm.c +10
-0+ e = (struct soc_enum *)kcontrol->private_value; + +if (e->autodisable) { +struct snd_soc_dapm_widget template; + +memset (&template,0 ,sizeof (template)); + template.reg = e->reg; + template.mask = e->mask << e->shift_l; + template.shift = e->shift_l; + template.off_val = e->values[0 ];
I think we should handle the case where e->values is NULL. In which case off_val should just be 0.
Quoted 4 lines
sound/soc/soc-dapm.c +4
-0+ template.on_val = template.off_val; + template.id = snd_soc_dapm_kcontrol; + template.name = name; +
[...]
sound/soc/soc-dapm.c int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, · line 3041
Quoted 11 lines
sound/soc/soc-dapm.c +2
-2@@ -3002,10 +3034,10 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,mutex_lock_nested (&card->dapm_mutex,SND_SOC_DAPM_CLASS_RUNTIME ); + change =dapm_kcontrol_set_value (kcontrol, val); +if (e->reg !=SND_SOC_NOPM ) change =soc_dapm_test_bits (dapm, e->reg, mask, val); -else - change =dapm_kcontrol_set_value (kcontrol, val);
This probably needs the same logic as in snd_soc_dapm_put_volsw() to correctly handle the case where the hardware state and the software state might be out of sync.
sound/soc/soc-dapm.c int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, · line 3043
Quoted 3 lines
sound/soc/soc-dapm.c +0
-0if (change) {if (e->reg !=SND_SOC_NOPM ) {
/
Re: [PATCH v2 4/5] ASoC: dapm: Add support for autodisable mux controls
Quoted 12 lines · Lars-Peter Clausen
On 04/30/2015 06:38 PM, Charles Keepax wrote:
[...]Quoted 10 lines
sound/soc/soc-dapm.c +6
-0@@ -354,6 +355,34 @@ static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, } }break ; +case snd_soc_dapm_mux: + e = (struct soc_enum *)kcontrol->private_value; + +if (e->autodisable) { +struct snd_soc_dapm_widget template; +
Quoted 8 lines
sound/soc/soc-dapm.c static int dapm_kcontrol_data_alloc(struct snd_soc_dapm_widget *widget, · line 368
Quoted 5 lines
sound/soc/soc-dapm.c +5
-0+memset (&template,0 ,sizeof (template)); + template.reg = e->reg; + template.mask = e->mask << e->shift_l; + template.shift = e->shift_l; + template.off_val = e->values[0 ];I think we should handle the case where
e->valuesis NULL. In which caseoff_valshould just be 0.
Ooops yeah sorry got a bit over keen there.
Quoted 11 lines
Quoted 5 lines
sound/soc/soc-dapm.c +4
-0+ template.on_val = template.off_val; + template.id = snd_soc_dapm_kcontrol; + template.name = name; +[...]
Quoted 4 lines
sound/soc/soc-dapm.c +0
-0@@ -3002,10 +3034,10 @@ int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol,mutex_lock_nested (&card->dapm_mutex,SND_SOC_DAPM_CLASS_RUNTIME );
Quoted 11 lines
sound/soc/soc-dapm.c int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, · line 3041
Quoted 7 lines
sound/soc/soc-dapm.c +2
-2+ change =dapm_kcontrol_set_value (kcontrol, val); +if (e->reg !=SND_SOC_NOPM ) change =soc_dapm_test_bits (dapm, e->reg, mask, val); -else - change =dapm_kcontrol_set_value (kcontrol, val);This probably needs the same logic as in
snd_soc_dapm_put_volsw()to correctly handle the case where the hardware state and the software state might be out of sync.
Yeah makes sense.
Quoted 5 lines
sound/soc/soc-dapm.c int snd_soc_dapm_put_enum_double(struct snd_kcontrol *kcontrol, · line 3043
Quoted 4 lines
sound/soc/soc-dapm.c +0
-0if (change) {if (e->reg !=SND_SOC_NOPM ) {/
I will send out a new spin shortly.
Thanks,
Charles
PATCH v2 5/5 ASoC: arizona: Use auto disable muxes for routing
In reply to Charles KeepaxThe mixer core on the Arizona devices is powered up whenever any routing is non-zero. This patch saves a little power and avoids a few difficult corner cases (around the mixer core being powered whilst there is no clock available), by using the autodisable mux functionality to only write out the settings for the muxes when they are powered up.
--- sound/soc/codecs/arizona.h | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/arizona.h +2 -2
@@ -107,8 +107,8 @@ extern int arizona_mixer_values[ARIZONA_NUM_MIXER_INPUTS]; arizona_mixer_tlv)#define ARIZONA_MUX_ENUM_DECL (name, reg) \ - SOC_VALUE_ENUM_SINGLE_DECL(name, reg, 0, 0xff, \ - arizona_mixer_texts, arizona_mixer_values) + SOC_VALUE_ENUM_SINGLE_AUTODISABLE_DECL( \ + name, reg, 0, 0xff, arizona_mixer_texts, arizona_mixer_values)#define ARIZONA_MUX_CTL_DECL (name) \ const struct snd_kcontrol_new name##_mux = \
Signature · 1 line
1.7.2.5