Patch "Bluetooth: ath3k: Add support Atheros AR5B195 combo Mini PCIe card" has been added to the 3.19-stable tree
Subsystems (2)
This is a note to let you know that I've just added the patch titled
Bluetooth: ath3k: Add support Atheros AR5B195 combo Mini PCIe card
to the 3.19-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
bluetooth-ath3k-add-support-atheros-ar5b195-combo-mini-pcie-card.patch
and it can be found in the queue-3.19 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
2eeff0b4317a02f0e281df891d990194f0737aaeMon Sep 17 00:00:00 2001
From: Alexander Ploumistos <[email protected]>
Date: Fri, 13 Feb 2015 21:05:11 +0200
Subject: Bluetooth: ath3k: Add support Atheros AR5B195 combo Mini PCIe card
From: Alexander Ploumistos <[email protected]>
commit 2eeff0b4317a02f0e281df891d990194f0737aae upstream.
Add 04f2:aff1 to ath3k.c supported devices list and btusb.c blacklist, so that the device can load the ath3k firmware and re-enumerate itself as an AR3011 device.
T: Bus=05 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=04f2 ProdID=aff1 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
--- drivers/bluetooth/ath3k.c | 1 + drivers/bluetooth/btusb.c | 1 + 2 files changed, 2 insertions(+)
drivers/bluetooth/ath3k.c +1 -0
@@ -65,6 +65,7 @@ static const struct usb_device_id ath3k_/* Atheros AR3011 with sflash firmware*/ { USB_DEVICE(0x0489, 0xE027) }, { USB_DEVICE(0x0489, 0xE03D) }, + { USB_DEVICE(0x04F2, 0xAFF1) }, { USB_DEVICE(0x0930, 0x0215) }, { USB_DEVICE(0x0CF3, 0x3002) }, { USB_DEVICE(0x0CF3, 0xE019) },
drivers/bluetooth/btusb.c +1 -0
@@ -153,6 +153,7 @@ static const struct usb_device_id blackl/* Atheros 3011 with sflash firmware */ { USB_DEVICE(0x0489, 0xe027), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0489, 0xe03d), .driver_info = BTUSB_IGNORE }, + { USB_DEVICE(0x04f2, 0xaff1), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0930, 0x0215), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE }, { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
Patches currently in stable-queue which might be from [email protected] are
queue-3.19/bluetooth-ath3k-add-support-atheros-ar5b195-combo-mini-pcie-card.patch