Patch "ASoC: pcm512x: Fix divide by zero issue" has been added to the 4.0-stable tree
Subsystems (4)
This is a note to let you know that I've just added the patch titled
ASoC: pcm512x: Fix divide by zero issue
to the 4.0-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
asoc-pcm512x-fix-divide-by-zero-issue.patch
and it can be found in the queue-4.0 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.
Quoted 1 line
From
f073faa73626f41db7050a69edd5074c53ce6d6cMon Sep 17 00:00:00 2001
From: Howard Mitchell <[email protected]>
Date: Fri, 20 Mar 2015 21:13:45 +0000
Subject: ASoC: pcm512x: Fix divide by zero issue
From: Howard Mitchell <[email protected]>
commit f073faa73626f41db7050a69edd5074c53ce6d6c upstream.
If den=1 and pllin_rate>20MHz then den and num are adjusted to 0 causing a divide by zero error a few lines further on. Therefore this patch correctly scales num and den such that pllin_rate/den < 20MHz as required in the device data sheet.
--- sound/soc/codecs/pcm512x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
sound/soc/codecs/pcm512x.c +2 -2
@@ -576,8 +576,8 @@ static int pcm512x_find_pll_coeff(struct/* pllin_rate / P (or here, den) cannot be greater than 20 MHz */ if (pllin_rate / den >20000000 && num <8 ) { - num *=20000000 / (pllin_rate / den); - den *=20000000 / (pllin_rate / den); + num *=DIV_ROUND_UP (pllin_rate / den,20000000 ); + den *=DIV_ROUND_UP (pllin_rate / den,20000000 ); }dev_dbg (dev,"num / den = %lu / %lu\n" , num, den);
Patches currently in stable-queue which might be from [email protected] are
queue-4.0/asoc-pcm512x-add-analogue-prefix-to-analogue-volume-controls.patch queue-4.0/asoc-pcm512x-fix-divide-by-zero-issue.patch