Skip to contentSkip to conversation

ASoC: wm8903: Fix define for WM8903_VMID_RES_250K

PATCH Applied Axel Lin 2 participants 2 messages May 11, 2015 – May 13, 2015

Subsystems (3)
Sound ASoC Wolfson microelectronics drivers
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 ASoC: wm8903: Fix define for WM8903_VMID_RES_250K

VMID Control 0 BIT[2:1] is VMID Divider Enable and Select

00 = VMID disabled (for OFF mode)
01 = 2 x 50kΩ divider (for normal operation) 10 = 2 x 250kΩ divider (for low power standby) 11 = 2 x 5kΩ divider (for fast start-up)

So WM8903_VMID_RES_250K should be 2 << 1, which is 4.

Signed-off-by Axel Lin <[email protected]>
---
 sound/soc/codecs/wm8903.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
sound/soc/codecs/wm8903.h +1 -1
index db94931..0bb4a64 100644
@@ -172,7 +172,7 @@ extern int wm8903_mic_detect(struct snd_soc_codec *codec,
 #define WM8903_VMID_BUF_ENA_WIDTH                    1  /* VMID_BUF_ENA */
 
 #define WM8903_VMID_RES_50K                          2
-#define WM8903_VMID_RES_250K                         3
+#define WM8903_VMID_RES_250K                         4
 #define WM8903_VMID_RES_5K                           6
 
 /*
Signature · 8 lines
2.1.0



_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
maintainer Applied
#1 lore raw
Quoted 1 line · Axel Lin

VMID Control 0 BIT[2:1] is VMID Divider Enable and Select

Applied, thanks.