Skip to contentSkip to conversation

v3 exynos_defconfig: Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for Odroid-XU3

PATCH New Anand Moon 1 participant 4 messages May 13, 2015

Subsystems (2)
Arm (32-bit) Arm Samsung Exynos
lore
Share & tools
lore

Anand Moon

author
#0 lore raw

Enable SENSORS_PWM_FAN, SENSORS_INA2XX, LEDS for Odroid-XU3 on exynos_defconfig to support DTS changes.

-Anand Moon

author
#1 lore raw

PATCH v3 1/3 ARM: exynos_defconfig: Enable CONFIG_SENSORS_PWM_FAN for Odroid-XU3 pmw-fan

Enable CONFIG_SENSORS_PWM_FAN on exynos_defconfig to control fan power on Odroid-XU3.

Reviewed-by Krzysztof Kozlowski <[email protected]>
Signed-off-by Anand Moon <[email protected]>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/exynos_defconfig +1 -0
index d034c96..3c2784f 100644
@@ -101,6 +101,7 @@ CONFIG_CHARGER_MAX77693=y
 CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y
Signature · 1 line
1.9.1
author
#2 lore raw

PATCH v3 2/3 ARM: exynos_defconfig: Enable CONFIG_SENSORS_INA2XX for Odroid-XU3

In reply to Anand Moon

Odroid-XU3 board support power monitor sensor.

Below is the output of boot log.

[    3.241438] ina2xx 0-0040: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.248068] ina2xx 0-0041: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.254724] ina2xx 0-0044: power monitor ina231 (Rshunt = 10000 uOhm)
[    3.261354] ina2xx 0-0045: power monitor ina231 (Rshunt = 10000 uOhm)

ina231-i2c-0-40

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.01 V
power1:      175.00 mW
curr1:        +0.18 A

ina231-i2c-0-41

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.21 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-44

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.02 V
power1:       50.00 mW
curr1:        +0.04 A

ina231-i2c-0-45

Adapter: s3c2410-i2c
in0:          +0.00 V
in1:          +1.04 V
power1:       75.00 mW
curr1:        +0.07 A
Reviewed-by Krzysztof Kozlowski <[email protected]>
Signed-off-by Anand Moon <[email protected]>
---
 arch/arm/configs/exynos_defconfig | 1 +
 1 file changed, 1 insertion(+)
arch/arm/configs/exynos_defconfig +1 -0
index 3c2784f..300678a 100644
@@ -102,6 +102,7 @@ CONFIG_CHARGER_TPS65090=y
 CONFIG_HWMON=y
 CONFIG_SENSORS_LM90=y
 CONFIG_SENSORS_PWM_FAN=y
+CONFIG_SENSORS_INA2XX=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_THERMAL=y
 CONFIG_THERMAL=y
Signature · 1 line
1.9.1
author
#3 lore raw

PATCH v3 3/3 ARM: exynos_defconfig: Enable LEDs for Odroid-XU3

In reply to Anand Moon

Enable CONFIG_LEDS_GPIO, CONFIG_LEDS_TRIGGERS and
CONFIG_LEDS_TRIGGER_HEARTBEAT on Odroid-XU3
to support dts led changes.

Reviewed-by Krzysztof Kozlowski <[email protected]>
Signed-off-by Anand Moon <[email protected]>
---
 arch/arm/configs/exynos_defconfig | 3 +++
 1 file changed, 3 insertions(+)
arch/arm/configs/exynos_defconfig +3 -0
index 300678a..21411c5 100644
@@ -179,6 +179,9 @@ CONFIG_MMC_SDHCI_S3C_DMA=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_IDMAC=y
 CONFIG_MMC_DW_EXYNOS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_MAX77686=y
 CONFIG_RTC_DRV_MAX77802=y
Signature · 1 line
1.9.1