KVM platform device passthrough
v16 cover KVM platform device passthrough
This series aims at enabling KVM platform device passthrough.
On kernel side, the vfio platform driver is needed, available from 4.1-rc1 onwards.
This series now only relies on the following QEMU series, for dynamic instantiation of the VFIO platform device from qemu command line:
[1] [PATCH v12 0/4] machvirt dynamic sysbus device instantiation
http://comments.gmane.org/gmane.comp.emulators.kvm.arm.devel/886
Both series are candidate for QEMU 2.4 and available at
http://git.linaro.org/people/eric.auger/qemu.git
(branch vfio_integ_v16)
The series was tested on Calxeda Midway (ARMv7) where one xgmac is assigned to KVM host while the second one is assigned to the guest.
Wiki for Calxeda Midway setup:
https://wiki.linaro.org/LEG/Engineering/Virtualization/Platform_Device_Passthrough_on_Midway
Tested by Vikram Sethi on a device featuring 2 MMIO regions. Code also exercised successfully by VOSYS for AMBA derivative series.
Best Regards
Eric
History:
v15 -> v16:
- no code change
- add Vikram's T-b
- rebase on 0915aed
- remove linux header update patch file
v14 -> v15:
- add Peter R-b on sysbus: add irq_routing_notifier
- correct g_malloc0_n usage in skeleton
- correct return values of reset related functions
- include Cornelia's patch for header update
v13 -> v14:
- remove v13 9, 10, 11 patch files and replace them by a single patch file "sysbus: add irq_routing_notifier".
- in skeleton, fix ENAMETOOLONG sign
- remove VFIOINTp virtualID in "add irq assignment" patch file
- removed trace_vfio_platform_start_eventfd
v12 -> v13:
- header update but same update was already sent by Cornelia
- Rework VFIO signaling & irqfd setup: restored 2-step setup featuring eventfd setup on realize and then irqfd setup on irq binding.
- irqfd setup now uses kvm_irqchip_add_irqfd_notifier and sysbus irq_set_hook override. This leads to the introduction of 6 patch files enabling those 2 features. Paolo advised to introduce kvm_irqchip_add_irqfd_notifier series in the VFIO one. I did the same for irq_set_hook series but if it is better I can submit it aside.
- above changes made possible to remove
x hw/vfio/platform: add capability to start IRQ propagation" x hw/arm/virt: start VFIO IRQ propagation
- in sysbus-fdt.c, use platform_bus_get_mmio_addr instead of deprecated mmio[0] property. Thanks to Bharat who pointed this issue out. also cpu_to_be32 was used for size and base (Vikram input) .
- in skeleton misc corrections following Alex review.
v11->v12:
- add x-mmap property definition, without which the default value of vbasedev.allow_mmap is false, hence preventing the reg space from being mmapped.
v10->v11:
- rebase onto v2.3.0-rc0 (mainly related to PCIe support in virt)
- add dma-coherent property for calxeda midway (fix revealed by removal of kernel-side "vfio: type1: support for ARM SMMUS with VFIO_IOMMU_TYPE1")
- virt modifications to start VFIO IRQ forwarding are now in a separate patch
- rearrange linux header exports (those are still partial exports waiting for definitive 4.1-rc0)
- take into account Alex Bennée comments:
- use g_malloc0_n instead of g_malloc0
- use block declarations when possible
- rework readlink returned value treatment
- use g_strlcat in place strncat
- re-arrange mutex locking for multiple IRQ support (user-side handled eventfds)
- use g_snprintf instead of snprintf
- change the order of functions to avoid pre-declaration in platform.c
- add flags in VFIOINTp struct to detect whether the IRQ is automasked
- some comment rewriting
v9->v10:
- rebase on "vfio: cleanup vfio_get_device error path, remove vfio_populate_device": vfio_populate_device no more called in vfio_get_device but in vfio_base_device_init
- update VFIO header according to vfio platform driver v13 (no AMBA)
v8->v9:
- rebase on 2.2.0 and machvirt dynamic sysbus instantiation v10
- v8 1-11 were pulled
- patch files related to forwarding are moved in a seperate series since it depends on kernel series still in RFC.
- introduction of basic VFIO platform device split into 3 patch files to ease the review (hope it will help).
- add an author in platform.c
- add deallocation in vfio_populate_device error case
- add patch file doing the VFIO header sync
- use VFIO_DEVICE_FLAGS_PLATFORM in vfio_populate_device
- rename calxeda_xgmac.c into calxeda-xgmac.c
- sysbus-fdt: add_calxeda_midway_xgmac_fdt_node g_free in case of errors
- reword of linux-headers patch files
v7->v8:
- rebase on v2.2.0-rc3 and integrate
"Add skip_dump flag to ignore memory region during dump"
- KVM header evolution with subindex addition in kvm_arch_forwarded_irq
- split [PATCH v7 03/16] hw/vfio/pci: introduce VFIODevice into 4 patches
- vfio_compute_needs_reset does not return bool anymore
- add some comments about exposed MMIO region and IRQ in calxeda xgmac device
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- rework IRQ startup: former machine init done notifier is replaced by a reset notifier. machine file passes the interrupt controller DeviceState handle (not the platform bus first irq parameter).
- sysbus-fdt:
- move the add_fdt_node_functions array declaration between the device specific code and the generic code to avoid forward declarations of decice specific functions
- rename add_basic_vfio_fdt_node into add_calxeda_midway_xgmac_fdt_node emphasizing the fact it is xgmac specific
v6->v7:
- fake injection test modality removed
- VFIO_DEVICE_TYPE_PLATFORM only introduced with VFIO platform
- new helper functions to start VFIO IRQ on machine init done notifier (introduced in hw/vfio/platform: add vfio-platform support and notifier registration invoked in hw/arm/virt: add support for VFIO devices). vfio_start_irq_injection is replaced by vfio_register_irq_starter.
v5->v6:
- rebase on 2.1rc5 PCI code
- forwarded IRQ first integraton
- vfio_device property renamed into host property
- split IRQ setup in different functions that match the 3 supported injection techniques (user handled eventfd, irqfd, forwarded IRQ):
removes dynamic switch between injection methods
- introduce fake interrupts as a test modality:
x makes possible to test multiple IRQ user-side handling. x this is a test feature only: enable to trigger a fd as if the
real physical IRQ hit. No virtual IRQ is injected into the guest but handling is simulated so that the state machine can be tested
- user handled eventfd:
x add mutex to protect IRQ state & list manipulation,
x correct misleading comment in vfio_intp_interrupt.
x Fix bugs using fake interrupt modality
- irqfd no more advertised in this patchset (handled in [3])
- VFIOPlatformDeviceClass becomes abstract and Calxeda xgmac device and class is re-introduced (as per v4)
- all DPRINTF removed in platform and replaced by trace-points
- corrects compilation with configure --disable-kvm
- simplifies the split for vfio_get_device and introduce a unique specialized function named vfio_populate_device
- group_list renamed into vfio_group_list
- hw/arm/dyn_sysbus_devtree.c currently only support vfio-calxeda-xgmac instantiation. Needs to be specialized for other VFIO devices
- fix 2 bugs in dyn_sysbus_devtree(reg_attr index and compat)
v4->v5:
- rebase on v2.1.0 PCI code
- take into account Alex Williamson comments on PCI code rework
- trace updates in vfio_region_write/read
- remove fd from VFIORegion
- get/put ckeanup
- bug fix: bar region's vbasedev field duly initialization
- misc cleanups in platform device
- device tree node generation removed from device and handled in hw/arm/dyn_sysbus_devtree.c
- remove "hw/vfio: add an example calxeda_xgmac": with removal of device tree node generation we do not have so many things to implement in that derived device yet. May be re-introduced later on if needed typically for reset/migration.
- no GSI routing table anymore
v3->v4 changes (Eric Auger, Alvise Rigo)
- rebase on last VFIO PCI code (v2.1.0-rc0)
- full git history rework to ease PCI code change review
- mv include files in hw/vfio
- DPRINTF reformatting temporarily moved out
- support of VFIO virq (removal of resamplefd handler on user-side)
- integration with sysbus dynamic instantiation framwork
- removal of unrealize and cleanup routines until it is better understood what is really needed
- Support of VFIO for Amba devices should be handled in an inherited device to specialize the device tree generation (clock handle currently missing in framework however)
- "Always use eventfd as notifying mechanism" temporarily moved out
- static instantiation is not mainstream (although it remains possible) note if static instantiation is used, irqfd must be setup in machine file when virtual IRQ is known
- create the GSI routing table on qemu side
v2->v3 changes (Alvise Rigo, Eric Auger):
- Following Alex W recommandations, further efforts to factorize the code between PCI:introduction of VFIODevice and VFIORegion as base classes
- unique reset handler for platform and PCI
- cleanup following Kim's comments
- multiple IRQ support mechanics should be in place although not tested
- Better handling of MMIO multiple regions
- New features and fixes by Alvise (multiple compat string, exec flag, force eventfd usage, amba device tree support)
- irqfd support
v1->v2 changes (Kim Phillips, Eric Auger):
- IRQ initial support (legacy mode where eventfds are handled on user side)
- hacked dynamic instantiation
v1 (Kim Phillips):
- initial split between PCI and platform
- MMIO support only
- static instantiation
Eric Auger (9):
hw/vfio/platform: vfio-platform skeleton hw/vfio/platform: add irq assignment
hw/vfio/platform: calxeda xgmac device hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation
kvm: rename kvm_irqchip_[add,remove]_irqfd_notifier with gsi suffix kvm-all.c: add qemu_irq/gsi hash table and utility routines
intc: arm_gic_kvm: set the qemu_irq/gsi mapping
sysbus: add irq_routing_notifier
hw/vfio/platform: add irqfd support
hw/arm/sysbus-fdt.c | 72 ++++ hw/core/sysbus.c | 6 + hw/intc/arm_gic_kvm.c | 6 + hw/s390x/virtio-ccw.c | 8 +- hw/vfio/Makefile.objs | 2 + hw/vfio/calxeda-xgmac.c | 54 +++ hw/vfio/pci.c | 6 +- hw/vfio/platform.c | 723 +++++++++++++++++++++++++++++++++++ hw/virtio/virtio-pci.c | 4 +- include/hw/sysbus.h | 1 + include/hw/vfio/vfio-calxeda-xgmac.h | 46 +++ include/hw/vfio/vfio-common.h | 1 + include/hw/vfio/vfio-platform.h | 77 ++++ include/sysemu/kvm.h | 11 +- kvm-all.c | 44 ++- kvm-stub.c | 7 +- trace-events | 13 + 17 files changed, 1064 insertions(+), 17 deletions(-) create mode 100644 hw/vfio/calxeda-xgmac.c create mode 100644 hw/vfio/platform.c create mode 100644 include/hw/vfio/vfio-calxeda-xgmac.h create mode 100644 include/hw/vfio/vfio-platform.h
Signature · 6 lines
1.8.3.2 _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
PATCH v16 1/9 hw/vfio/platform: vfio-platform skeleton
Minimal VFIO platform implementation supporting register space user mapping but not IRQ assignment.
---
v15 -> v16:
- added Vikram's T-b
v14 -> v15:
- vfio_platform_compute_needs_reset now returns true while vfio_platform_hot_reset_multi returns -1
- adjust g_malloc0_n usage
v13 -> v14:
- fix ENAMETOOLONG error path sign
v12 -> v13:
- check device name does not contain any /
- handle case where readlink fully fills the buffer
- in vfio_map_region declare size as uint64_t
v11 -> v12:
- add x-mmap property definition, without which the default value of vbasedev.allow_mmap is false, hence preventing the reg space from being mapped.
v10 -> v11:
x Take into account Alex Bennee's comments:
- use g_malloc0_n instead of g_malloc0
- use block declarations when possible
- rework readlink returned value treatment
- use g_strlcat in place of strncat
x use g_snprintf in place of snprintf
x correct error handling in vfio_populate_device,
in case of flag not corresponding to platform device
x various cosmetic changes
v9 -> v10:
- vfio_populate_device no more called in common vfio_get_device but in vfio_base_device_init
v8 -> v9:
- irq management is moved into a separate patch to ease the review
- VFIO_DEVICE_FLAGS_PLATFORM is checked in vfio_populate_device
- g_free of regions added in vfio_populate_device error label
- virtualID becomes 32b
v7 -> v8:
- change proto of vfio_platform_compute_needs_reset and sets vbasedev->needs_reset to false there
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- vfio_register_irq_starter renamed into vfio_kick_irqs
we now use a reset notifier instead of a machine init done notifier. Enables to get rid of the VfioIrqStarterNotifierParams dangling pointer. Previously we use pbus first_irq. This is no more possible since the reset notifier takes a void * and first_irq is a field of a const struct. So now we pass the DeviceState handle of the interrupt controller. I tried to keep the code generic, reason why I did not rely on an architecture specific accessor to retrieve the gsi number (gic accessor as proposed by Alex). I would like to avoid creating an ARM VFIO device model. I hope this model model can work on other archs than arm (no multiple intc?); wouldn't it be simpler to keep the previous first_irq parameter and relax the const constraint.
v6 -> v7:
- compat is not exposed anymore as a user option. Rationale is the vfio device became abstract and a specialization is needed anyway. The derived device must set the compat string.
- in v6 vfio_start_irq_injection was exposed in vfio-platform.h. A new function dubbed vfio_register_irq_starter replaces it. It registers a machine init done notifier that programs & starts all dynamic VFIO device IRQs. This function is supposed to be called by the machine file. A set of static helper routines are added too. It must be called before the creation of the platform bus device.
v5 -> v6:
- vfio_device property renamed into host property
- correct error handling of VFIO_DEVICE_GET_IRQ_INFO ioctl and remove PCI related comment
- remove declaration of vfio_setup_irqfd and irqfd_allowed property.Both belong to next patch (irqfd)
- remove declaration of vfio_intp_interrupt in vfio-platform.h
- functions that can be static get this characteristic
- remove declarations of vfio_region_ops, vfio_memory_listener, group_list, vfio_address_spaces. All are moved to vfio-common.h
- remove vfio_put_device declaration and definition
- print_regions removed. code moved into vfio_populate_regions
- replace DPRINTF by trace events
- new helper routine to set the trigger eventfd
- dissociate intp init from the injection enablement:
vfio_enable_intp renamed into vfio_init_intp and new function named vfio_start_eventfd_injection
- injection start moved to vfio_start_irq_injection (not anymore in vfio_populate_interrupt)
- new start_irq_fn field in VFIOPlatformDevice corresponding to the function that will be used for starting injection
- user handled eventfd:
x add mutex to protect IRQ state & list manipulation, x correct misleading comment in vfio_intp_interrupt. x Fix bugs thanks to fake interrupt modality
- VFIOPlatformDeviceClass becomes abstract
- add error_setg in vfio_platform_realize
v4 -> v5:
- vfio-plaform.h included first
- cleanup error handling in *populate*, vfio_get_device, vfio_enable_intp
- vfio_put_device not called anymore
- add some includes to follow vfio policy
v3 -> v4:
[Eric Auger]
- merge of "vfio: Add initial IRQ support in platform device" to get a full functional patch although perfs are limited.
- removal of unrealize function since I currently understand it is only used with device hot-plug feature.
v2 -> v3:
[Eric Auger]
- further factorization between PCI and platform (VFIORegion, VFIODevice). same level of functionality.
<= v2:
[Kim Philipps]
- Initial Creation of the device supporting register space mapping
--- hw/vfio/Makefile.objs | 1 + hw/vfio/platform.c | 287 ++++++++++++++++++++++++++++++++++++++++ include/hw/vfio/vfio-common.h | 1 + include/hw/vfio/vfio-platform.h | 44 ++++++ trace-events | 5 + 5 files changed, 338 insertions(+) create mode 100644 hw/vfio/platform.c create mode 100644 include/hw/vfio/vfio-platform.h
hw/vfio/Makefile.objs +1 -0
@@ -1,4 +1,5 @@ ifeq ($(CONFIG_LINUX), y) obj-$(CONFIG_SOFTMMU) += common.o obj-$(CONFIG_PCI) += pci.o +obj-$(CONFIG_SOFTMMU) += platform.o endif
hw/vfio/platform.c new file +287 -0
287 lines not on this page · raw message
include/hw/vfio/vfio-common.h +1 -0
@@ -42,6 +42,7 @@enum {VFIO_DEVICE_TYPE_PCI =0 , +VFIO_DEVICE_TYPE_PLATFORM =1 , }; typedef struct VFIORegion {
include/hw/vfio/vfio-platform.h new file +44 -0
44 lines not on this page · raw message
trace-events +5 -0
@@ -1560,6 +1560,11 @@ vfio_put_group(int fd) "close group->fd=%d" vfio_get_device(const char * name, unsigned int flags, unsigned int num_regions, unsigned int num_irqs) "Device %s flags: %u, regions: %u, irqs: %u" vfio_put_base_device(int fd) "close vdev->fd=%d" +# hw/vfio/platform.c +vfio_platform_populate_regions(int region_index, unsigned long flag, unsigned long size, int fd, unsigned long offset) "- region %d flags = 0x%lx, size = 0x%lx, fd= %d, offset = 0x%lx" +vfio_platform_base_device_init(char *name, int groupid) "%s belongs to group #%d" +vfio_platform_realize(char *name, char *compat) "vfio device %s, compat = %s" + #hw/acpi/memory_hotplug.c mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32 mhp_acpi_ejecting_invalid_slot(uint32_t slot) "0x%"PRIx32
Signature · 1 line
1.8.3.2
PATCH v16 2/9 hw/vfio/platform: add irq assignment
In reply to Eric AugerThis patch adds the code requested to assign interrupts to a guest. The interrupts are mediated through user handled eventfds only.
---
v15 -> v16:
- added Vikram's T-b
v13 -> v14:
- remove virtualID field in header
v12 -> v13:
- start user-side eventfd handling at realize time
- remove start_irq_fn
v10 -> v11:
- use block declaration when possible
- change order of vfio_platform_eoi vs vfio_intp_interrupt
- introduce vfio_intp_inject_pending_lockheld following Alex Bennee comments
- remove unmasking/masked when setting up VFIO signaling
- remove unused kvm_accel member in VFIOINTp struct
- add flags member in VFIOINTp in order to properly discriminate edge/level-sensitive IRQs; unmask the physical IRQ only in case of level-sensitive IRQ
- some comment rewording
v8 -> v9:
- free irq related resources in case of error in vfio_populate_device
--- hw/vfio/platform.c | 331 +++++++++++++++++++++++++++++++++++++++- include/hw/vfio/vfio-platform.h | 31 ++++ trace-events | 7 + 3 files changed, 368 insertions(+), 1 deletion(-)
hw/vfio/platform.c +330 -1
@@ -22,10 +22,299 @@#include "qemu/range.h" #include "sysemu/sysemu.h" #include "exec/memory.h" +#include "qemu/queue.h" #include "hw/sysbus.h" #include "trace.h" #include "hw/platform-bus.h" +/* +* Functions used whatever the injection method +*/ + +/** +* vfio_init_intp - allocate, initialize the IRQ struct pointer +* and add it into the list of IRQs +* @vbasedev: the VFIO device handle +* @info: irq info struct retrieved from VFIO driver +*/ +static VFIOINTp *vfio_init_intp (VFIODevice *vbasedev, +struct vfio_irq_info info) +{ +int ret; +VFIOPlatformDevice *vdev = +container_of (vbasedev, VFIOPlatformDevice, vbasedev); +SysBusDevice *sbdev =SYS_BUS_DEVICE (vdev); +VFIOINTp *intp; + + intp =g_malloc0 (sizeof (*intp)); + intp->vdev = vdev; + intp->pin = info.index; + intp->flags = info.flags; + intp->state =VFIO_IRQ_INACTIVE ; + +sysbus_init_irq (sbdev, &intp->qemuirq); + +/* Get an eventfd for trigger */ + ret =event_notifier_init (&intp->interrupt,0 ); +if (ret) { +g_free (intp); +error_report ("vfio: Error: trigger event_notifier_init failed " ); +return NULL ; + } + +QLIST_INSERT_HEAD (&vdev->intp_list, intp, next); +return intp; +} + +/** +* vfio_set_trigger_eventfd - set VFIO eventfd handling +* +* @intp: IRQ struct handle +* @handler: handler to be called on eventfd signaling +* +* Setup VFIO signaling and attach an optional user-side handler +* to the eventfd +*/ +static int vfio_set_trigger_eventfd (VFIOINTp *intp, +eventfd_user_side_handler_t handler) +{ +VFIODevice *vbasedev = &intp->vdev->vbasedev; +struct vfio_irq_set *irq_set; +int argsz, ret; +int32_t *pfd; + + argsz =sizeof (*irq_set) +sizeof (*pfd); + irq_set =g_malloc0 (argsz); + irq_set->argsz = argsz; + irq_set->flags =VFIO_IRQ_SET_DATA_EVENTFD |VFIO_IRQ_SET_ACTION_TRIGGER ; + irq_set->index = intp->pin; + irq_set->start =0 ; + irq_set->count =1 ; + pfd = (int32_t *)&irq_set->data; + *pfd =event_notifier_get_fd (&intp->interrupt); +qemu_set_fd_handler (*pfd, (IOHandler *)handler,NULL , intp); + ret =ioctl (vbasedev->fd,VFIO_DEVICE_SET_IRQS , irq_set); +g_free (irq_set); +if (ret <0 ) { +error_report ("vfio: Failed to set trigger eventfd: %m" ); +qemu_set_fd_handler (*pfd,NULL ,NULL ,NULL ); + } +return ret; +} + +/* +* Functions only used when eventfds are handled on user-side +* ie. without irqfd +*/ + +/** +* vfio_mmap_set_enabled - enable/disable the fast path mode +* @vdev: the VFIO platform device +* @enabled: the target mmap state +* +* enabled = true ~ fast path = MMIO region is mmaped (no KVM TRAP); +* enabled = false ~ slow path = MMIO region is trapped and region callbacks +* are called; slow path enables to trap the device IRQ status register reset +*/ + +static void vfio_mmap_set_enabled (VFIOPlatformDevice *vdev,bool enabled) +{ +int i; + +trace_vfio_platform_mmap_set_enabled (enabled); + +for (i =0 ; i < vdev->vbasedev.num_regions; i++) { +VFIORegion *region = vdev->regions[i]; + +memory_region_set_enabled (®ion->mmap_mem, enabled); + } +} + +/** +* vfio_intp_mmap_enable - timer function, restores the fast path +* if there is no more active IRQ +* @opaque: actually points to the VFIO platform device +* +* Called on mmap timer timout, this function checks whether the +* IRQ is still active and if not, restores the fast path. +* by construction a single eventfd is handled at a time. +* if the IRQ is still active, the timer is re-programmed. +*/ +static void vfio_intp_mmap_enable (void *opaque) +{ +VFIOINTp *tmp; +VFIOPlatformDevice *vdev = (VFIOPlatformDevice *)opaque; + +qemu_mutex_lock (&vdev->intp_mutex); + QLIST_FOREACH(tmp, &vdev->intp_list, next) { +if (tmp->state ==VFIO_IRQ_ACTIVE ) { +trace_vfio_platform_intp_mmap_enable (tmp->pin); +/* re-program the timer to check active status later */ +timer_mod (vdev->mmap_timer, +qemu_clock_get_ms (QEMU_CLOCK_VIRTUAL ) + + vdev->mmap_timeout); +qemu_mutex_unlock (&vdev->intp_mutex); +return ; + } + } +vfio_mmap_set_enabled (vdev, true); +qemu_mutex_unlock (&vdev->intp_mutex); +} + +/** +* vfio_intp_inject_pending_lockheld - Injects a pending IRQ +* @opaque: opaque pointer, in practice the VFIOINTp handle +* +* The function is called on a previous IRQ completion, from +* vfio_platform_eoi, while the intp_mutex is locked. +* Also in such situation, the slow path already is set and +* the mmap timer was already programmed. +*/ +static void vfio_intp_inject_pending_lockheld (VFIOINTp *intp) +{ +trace_vfio_platform_intp_inject_pending_lockheld (intp->pin, +event_notifier_get_fd (&intp->interrupt)); + + intp->state =VFIO_IRQ_ACTIVE ; + +/* trigger the virtual IRQ */ +qemu_set_irq (intp->qemuirq,1 ); +} + +/** +* vfio_intp_interrupt - The user-side eventfd handler +* @opaque: opaque pointer which in practice is the VFIOINTp handle +* +* the function is entered in event handler context: +* the vIRQ is injected into the guest if there is no other active +* or pending IRQ. +*/ +static void vfio_intp_interrupt (VFIOINTp *intp) +{ +int ret; +VFIOINTp *tmp; +VFIOPlatformDevice *vdev = intp->vdev; +bool delay_handling = false; + +qemu_mutex_lock (&vdev->intp_mutex); +if (intp->state ==VFIO_IRQ_INACTIVE ) { + QLIST_FOREACH(tmp, &vdev->intp_list, next) { +if (tmp->state ==VFIO_IRQ_ACTIVE || + tmp->state ==VFIO_IRQ_PENDING ) { + delay_handling = true; +break ; + } + } + } +if (delay_handling) { +/* +* the new IRQ gets a pending status and is pushed in +* the pending queue +*/ + intp->state =VFIO_IRQ_PENDING ; +trace_vfio_intp_interrupt_set_pending (intp->pin); +QSIMPLEQ_INSERT_TAIL (&vdev->pending_intp_queue, + intp, pqnext); + ret =event_notifier_test_and_clear (&intp->interrupt); +qemu_mutex_unlock (&vdev->intp_mutex); +return ; + } + +trace_vfio_platform_intp_interrupt (intp->pin, +event_notifier_get_fd (&intp->interrupt)); + + ret =event_notifier_test_and_clear (&intp->interrupt); +if (!ret) { +error_report ("Error when clearing fd=%d (ret = %d)\n" , +event_notifier_get_fd (&intp->interrupt), ret); + } + + intp->state =VFIO_IRQ_ACTIVE ; + +/* sets slow path */ +vfio_mmap_set_enabled (vdev, false); + +/* trigger the virtual IRQ */ +qemu_set_irq (intp->qemuirq,1 ); + +/* +* Schedule the mmap timer which will restore fastpath when no IRQ +* is active anymore +*/ +if (vdev->mmap_timeout) { +timer_mod (vdev->mmap_timer, +qemu_clock_get_ms (QEMU_CLOCK_VIRTUAL ) + + vdev->mmap_timeout); + } +qemu_mutex_unlock (&vdev->intp_mutex); +} + +/** +* vfio_platform_eoi - IRQ completion routine +* @vbasedev: the VFIO device handle +* +* De-asserts the active virtual IRQ and unmasks the physical IRQ +* (effective for level sensitive IRQ auto-masked by the VFIO driver). +* Then it handles next pending IRQ if any. +* eoi function is called on the first access to any MMIO region +* after an IRQ was triggered, trapped since slow path was set. +* It is assumed this access corresponds to the IRQ status +* register reset. With such a mechanism, a single IRQ can be +* handled at a time since there is no way to know which IRQ +* was completed by the guest (we would need additional details +* about the IRQ status register mask). +*/ +static void vfio_platform_eoi (VFIODevice *vbasedev) +{ +VFIOINTp *intp; +VFIOPlatformDevice *vdev = +container_of (vbasedev, VFIOPlatformDevice, vbasedev); + +qemu_mutex_lock (&vdev->intp_mutex); + QLIST_FOREACH(intp, &vdev->intp_list, next) { +if (intp->state ==VFIO_IRQ_ACTIVE ) { +trace_vfio_platform_eoi (intp->pin, +event_notifier_get_fd (&intp->interrupt)); + intp->state =VFIO_IRQ_INACTIVE ; + +/* deassert the virtual IRQ */ +qemu_set_irq (intp->qemuirq,0 ); + +if (intp->flags &VFIO_IRQ_INFO_AUTOMASKED ) { +/* unmasks the physical level-sensitive IRQ */ +vfio_unmask_single_irqindex (vbasedev, intp->pin); + } + +/* a single IRQ can be active at a time */ +break ; + } + } +/* in case there are pending IRQs, handle the first one */ +if (!QSIMPLEQ_EMPTY (&vdev->pending_intp_queue)) { + intp =QSIMPLEQ_FIRST (&vdev->pending_intp_queue); +vfio_intp_inject_pending_lockheld (intp); +QSIMPLEQ_REMOVE_HEAD (&vdev->pending_intp_queue, pqnext); + } +qemu_mutex_unlock (&vdev->intp_mutex); +} + +/** +* vfio_start_eventfd_injection - starts the virtual IRQ injection using +* user-side handled eventfds +* @intp: the IRQ struct pointer +*/ + +static int vfio_start_eventfd_injection (VFIOINTp *intp) +{ +int ret; + + ret =vfio_set_trigger_eventfd (intp, vfio_intp_interrupt); +if (ret) { +error_report ("vfio: Error: Failed to pass IRQ fd to the driver: %m" ); + } +return ret; +} +/* VFIO skeleton */ static void vfio_platform_compute_needs_reset (VFIODevice *vbasedev)
@@ -41,12 +330,13 @@ static int vfio_platform_hot_reset_multi(VFIODevice *vbasedev)/** * vfio_populate_device - Allocate and populate MMIO region -* structs according to driver returned information +* and IRQ structs according to driver returned information * @vbasedev: the VFIO device handle * */ static int vfio_populate_device (VFIODevice *vbasedev) { +VFIOINTp *intp, *tmp;int i, ret =-1 ;VFIOPlatformDevice *vdev =container_of (vbasedev, VFIOPlatformDevice, vbasedev);
@@ -84,7 +374,38 @@ static int vfio_populate_device(VFIODevice *vbasedev) (unsigned long)ptr->fd_offset); } + vdev->mmap_timer =timer_new_ms (QEMU_CLOCK_VIRTUAL , + vfio_intp_mmap_enable, vdev); + +QSIMPLEQ_INIT (&vdev->pending_intp_queue); + +for (i =0 ; i < vbasedev->num_irqs; i++) { +struct vfio_irq_info irq = { .argsz =sizeof (irq) }; + + irq.index = i; + ret =ioctl (vbasedev->fd,VFIO_DEVICE_GET_IRQ_INFO , &irq); +if (ret) { +error_printf ("vfio: error getting device %s irq info" , + vbasedev->name); + goto irq_err; + }else { +trace_vfio_platform_populate_interrupts (irq.index, + irq.count, + irq.flags); + intp =vfio_init_intp (vbasedev, irq); +if (!intp) { +error_report ("vfio: Error installing IRQ %d up" , i); + goto irq_err; + } + } + }return 0 ; +irq_err: +timer_del (vdev->mmap_timer); + QLIST_FOREACH_SAFE(intp, &vdev->intp_list, next, tmp) { +QLIST_REMOVE (intp, next); +g_free (intp); + } reg_error:for (i =0 ; i < vbasedev->num_regions; i++) {g_free (vdev->regions[i]);
@@ -97,6 +418,7 @@ reg_error:static VFIODeviceOps vfio_platform_ops = { .vfio_compute_needs_reset = vfio_platform_compute_needs_reset, .vfio_hot_reset_multi = vfio_platform_hot_reset_multi, + .vfio_eoi = vfio_platform_eoi, };/**
@@ -228,6 +550,7 @@ static void vfio_platform_realize(DeviceState *dev, Error **errp)VFIOPlatformDevice *vdev =VFIO_PLATFORM_DEVICE (dev);SysBusDevice *sbdev =SYS_BUS_DEVICE (dev);VFIODevice *vbasedev = &vdev->vbasedev; +VFIOINTp *intp;int i, ret; vbasedev->type =VFIO_DEVICE_TYPE_PLATFORM ;
@@ -246,6 +569,10 @@ static void vfio_platform_realize(DeviceState *dev, Error **errp)vfio_map_region (vdev, i);sysbus_init_mmio (sbdev, &vdev->regions[i]->mem); } + + QLIST_FOREACH(intp, &vdev->intp_list, next) { +vfio_start_eventfd_injection (intp); + } }static const VMStateDescription vfio_platform_vmstate = {
@@ -256,6 +583,8 @@ static const VMStateDescription vfio_platform_vmstate = {static Property vfio_platform_dev_properties[] = {DEFINE_PROP_STRING ("host" , VFIOPlatformDevice, vbasedev.name),DEFINE_PROP_BOOL ("x-mmap" , VFIOPlatformDevice, vbasedev.allow_mmap, true), +DEFINE_PROP_UINT32 ("mmap-timeout-ms" , VFIOPlatformDevice, + mmap_timeout,1100 ),DEFINE_PROP_END_OF_LIST (), };
include/hw/vfio/vfio-platform.h +31 -0
@@ -18,14 +18,45 @@#include "hw/sysbus.h" #include "hw/vfio/vfio-common.h" +#include "qemu/event_notifier.h" +#include "qemu/queue.h" +#include "hw/irq.h" #define TYPE_VFIO_PLATFORM "vfio-platform" +enum { +VFIO_IRQ_INACTIVE =0 , +VFIO_IRQ_PENDING =1 , +VFIO_IRQ_ACTIVE =2 , +/* VFIO_IRQ_ACTIVE_AND_PENDING cannot happen with VFIO */ +}; + +typedef struct VFIOINTp { +QLIST_ENTRY (VFIOINTp) next;/* entry for IRQ list */ +QSIMPLEQ_ENTRY (VFIOINTp) pqnext;/* entry for pending IRQ queue */ +EventNotifier interrupt;/* eventfd triggered on interrupt */ +EventNotifier unmask;/* eventfd for unmask on QEMU bypass */ +qemu_irq qemuirq; +struct VFIOPlatformDevice *vdev;/* back pointer to device */ +int state;/* inactive, pending, active */ +uint8_t pin;/* index */ +uint32_t flags;/* IRQ info flags */ +}VFIOINTp ; + +/* function type for user side eventfd handler */ +typedef void (*eventfd_user_side_handler_t )(VFIOINTp *intp); +typedef struct VFIOPlatformDevice {SysBusDevice sbdev;VFIODevice vbasedev;/* not a QOM object */ VFIORegion **regions; + QLIST_HEAD(, VFIOINTp) intp_list; /* list of IRQs */ +/* queue of pending IRQs */ + QSIMPLEQ_HEAD(pending_intp_queue, VFIOINTp) pending_intp_queue;char *compat;/* compatibility string */ +uint32_t mmap_timeout;/* delay to re-enable mmaps after interrupt */ +QEMUTimer *mmap_timer;/* allows fast-path resume after IRQ hit */ +QemuMutex intp_mutex;/* protect the intp_list IRQ state */ }VFIOPlatformDevice ; typedef struct VFIOPlatformDeviceClass {
trace-events +7 -0
@@ -1564,6 +1564,13 @@ vfio_put_base_device(int fd) "close vdev->fd=%d" vfio_platform_populate_regions(int region_index, unsigned long flag, unsigned long size, int fd, unsigned long offset) "- region %d flags = 0x%lx, size = 0x%lx, fd= %d, offset = 0x%lx" vfio_platform_base_device_init(char *name, int groupid) "%s belongs to group #%d" vfio_platform_realize(char *name, char *compat) "vfio device %s, compat = %s" +vfio_platform_eoi(int pin, int fd) "EOI IRQ pin %d (fd=%d)" +vfio_platform_mmap_set_enabled(bool enabled) "fast path = %d" +vfio_platform_intp_mmap_enable(int pin) "IRQ #%d still active, stay in slow path" +vfio_platform_intp_interrupt(int pin, int fd) "Inject IRQ #%d (fd = %d)" +vfio_platform_intp_inject_pending_lockheld(int pin, int fd) "Inject pending IRQ #%d (fd = %d)" +vfio_platform_populate_interrupts(int pin, int count, int flags) "- IRQ index %d: count %d, flags=0x%x" +vfio_intp_interrupt_set_pending(int index) "irq %d is set PENDING" #hw/acpi/memory_hotplug.c mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
Signature · 1 line
1.8.3.2
PATCH v16 3/9 hw/vfio/platform: calxeda xgmac device
In reply to Eric AugerThe platform device class has become abstract. This patch introduces a calxeda xgmac device that derives from it.
---
v15 -> v16:
- added Vikram's T-b
v10 -> v11:
- add Alex Reviewed-by
- move virt modifications in a separate patch
v8 -> v9:
- renamed calxeda_xgmac.c into calxeda-xgmac.c
v7 -> v8:
- add a comment in the header about the MMIO regions and IRQ which are exposed by the device
v5 -> v6
- back again following Alex Graf advises
- fix a bug related to compat override
v4 -> v5:
removed since device tree was moved to hw/arm/dyn_sysbus_devtree.c
v4: creation for device tree specialization
--- hw/vfio/Makefile.objs | 1 + hw/vfio/calxeda-xgmac.c | 54 ++++++++++++++++++++++++++++++++++++ include/hw/vfio/vfio-calxeda-xgmac.h | 46 ++++++++++++++++++++++++++++++ 3 files changed, 101 insertions(+) create mode 100644 hw/vfio/calxeda-xgmac.c create mode 100644 include/hw/vfio/vfio-calxeda-xgmac.h
hw/vfio/Makefile.objs +1 -0
@@ -2,4 +2,5 @@ ifeq ($(CONFIG_LINUX), y) obj-$(CONFIG_SOFTMMU) += common.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_SOFTMMU) += platform.o +obj-$(CONFIG_SOFTMMU) += calxeda-xgmac.o endif
hw/vfio/calxeda-xgmac.c new file +54 -0
54 lines not on this page · raw message
include/hw/vfio/vfio-calxeda-xgmac.h new file +46 -0
46 lines not on this page · raw message
Signature · 6 lines
1.8.3.2 _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
PATCH v16 4/9 hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation
In reply to Eric AugerThis patch allows the instantiation of the vfio-calxeda-xgmac device from the QEMU command line (-device vfio-calxeda-xgmac,host="<device>").
A specialized device tree node is created for the guest, containing compat, dma-coherent, reg and interrupts properties.
---
v15 -> v16:
- added Vikram's T-b
v12 -> v13:
- use platform_bus_get_mmio_addr instead of deprecated mmio[0] property. Thanks to Bharat who pointed this issue out.
- use cpu_to_be32 to mmio_base & size (Vikram report)
v10 -> v11:
- add dma-coherent property to calxeda midway xgmac node (fix)
- use qemu_fdt_setprop to add reg property instead of qemu_fdt_setprop_sized_cells_from_array
- commit message rewording
v8 -> v9:
- properly free resources in case of errors in
add_calxeda_midway_xgmac_fdt_node
v7 -> v8:
- move the add_fdt_node_functions array declaration between the device specific code and the generic code to avoid forward declarations of decice specific functions
- rename add_basic_vfio_fdt_node into add_calxeda_midway_xgmac_fdt_node
v6 -> v7:
- compat string re-formatting removed since compat string is not exposed anymore as a user option
- VFIO IRQ kick-off removed from sysbus-fdt and moved to VFIO platform device
--- hw/arm/sysbus-fdt.c | 72 +++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+)
hw/arm/sysbus-fdt.c +72 -0
@@ -26,6 +26,8 @@#include "sysemu/device_tree.h" #include "hw/platform-bus.h" #include "sysemu/sysemu.h" +#include "hw/vfio/vfio-platform.h" +#include "hw/vfio/vfio-calxeda-xgmac.h" /* * internal struct that contains the information to create dynamic
@@ -53,11 +55,81 @@ typedef struct NodeCreationPair {int (*add_fdt_node_fn)(SysBusDevice *sbdev,void *opaque); } NodeCreationPair; +/* Device Specific Code */ + +/** +* add_calxeda_midway_xgmac_fdt_node +* +* Generates a simple node with following properties: +* compatible string, regs, interrupts, dma-coherent +*/ +static int add_calxeda_midway_xgmac_fdt_node (SysBusDevice *sbdev,void *opaque) +{ +PlatformBusFDTData *data = opaque; +PlatformBusDevice *pbus = data->pbus; +void *fdt = data->fdt; +const char *parent_node = data->pbus_node_name; +int compat_str_len, i, ret =-1 ; +char *nodename; +uint32_t *irq_attr, *reg_attr; +uint64_t mmio_base, irq_number; +VFIOPlatformDevice *vdev =VFIO_PLATFORM_DEVICE (sbdev); +VFIODevice *vbasedev = &vdev->vbasedev; + + mmio_base =platform_bus_get_mmio_addr (pbus, sbdev,0 ); + nodename =g_strdup_printf ("%s/%s@%" PRIx64, parent_node, + vbasedev->name, mmio_base); +qemu_fdt_add_subnode (fdt, nodename); + + compat_str_len =strlen (vdev->compat) +1 ; +qemu_fdt_setprop (fdt, nodename,"compatible" , + vdev->compat, compat_str_len); + +qemu_fdt_setprop (fdt, nodename,"dma-coherent" ,"" ,0 ); + + reg_attr =g_new (uint32_t, vbasedev->num_regions*2 ); +for (i =0 ; i < vbasedev->num_regions; i++) { + mmio_base =platform_bus_get_mmio_addr (pbus, sbdev, i); + reg_attr[2 *i] =cpu_to_be32 (mmio_base); + reg_attr[2 *i+1 ] =cpu_to_be32 ( +memory_region_size (&vdev->regions[i]->mem)); + } + ret =qemu_fdt_setprop (fdt, nodename,"reg" , reg_attr, + vbasedev->num_regions*2 *sizeof (uint32_t )); +if (ret) { +error_report ("could not set reg property of node %s" , nodename); + goto fail_reg; + } + + irq_attr =g_new (uint32_t, vbasedev->num_irqs*3 ); +for (i =0 ; i < vbasedev->num_irqs; i++) { + irq_number =platform_bus_get_irqn (pbus, sbdev , i) + + data->irq_start; + irq_attr[3 *i] =cpu_to_be32 (0 ); + irq_attr[3 *i+1 ] =cpu_to_be32 (irq_number); + irq_attr[3 *i+2 ] =cpu_to_be32 (0x4 ); + } + ret =qemu_fdt_setprop (fdt, nodename,"interrupts" , + irq_attr, vbasedev->num_irqs*3 *sizeof (uint32_t )); +if (ret) { +error_report ("could not set interrupts property of node %s" , + nodename); + } +g_free (irq_attr); +fail_reg: +g_free (reg_attr); +g_free (nodename); +return ret; +} +/* list of supported dynamic sysbus devices */ static const NodeCreationPair add_fdt_node_functions[] = { + {TYPE_VFIO_CALXEDA_XGMAC , add_calxeda_midway_xgmac_fdt_node}, {"" ,NULL },/* last element */ }; +/* Generic Code */ +/** * add_fdt_node - add the device tree node of a dynamic sysbus device *
Signature · 1 line
1.8.3.2
PATCH v16 5/9 kvm: rename kvm_irqchip_[add, remove]_irqfd_notifier with gsi suffix
In reply to Eric AugerAnticipating for the introduction of new add/remove functions taking a qemu_irq parameter, let's rename existing ones with a gsi suffix.
---
v15 -> v16:
- added Vikram's T-b
- resolve rebase conflict in kvm.h
--- hw/s390x/virtio-ccw.c | 8 ++++---- hw/vfio/pci.c | 6 +++--- hw/virtio/virtio-pci.c | 4 ++-- include/sysemu/kvm.h | 7 ++++--- kvm-all.c | 7 ++++--- kvm-stub.c | 7 ++++--- 6 files changed, 21 insertions(+), 18 deletions(-)
hw/s390x/virtio-ccw.c +4 -4
@@ -1216,8 +1216,8 @@ static int virtio_ccw_add_irqfd(VirtioCcwDevice *dev, int n)VirtQueue *vq =virtio_get_queue (vdev, n);EventNotifier *notifier =virtio_queue_get_guest_notifier (vq); -return kvm_irqchip_add_irqfd_notifier (kvm_state, notifier,NULL , - dev->routes.gsi[n]); +return kvm_irqchip_add_irqfd_notifier_gsi (kvm_state, notifier,NULL , + dev->routes.gsi[n]); }static void virtio_ccw_remove_irqfd (VirtioCcwDevice *dev,int n)
@@ -1227,8 +1227,8 @@ static void virtio_ccw_remove_irqfd(VirtioCcwDevice *dev, int n)EventNotifier *notifier =virtio_queue_get_guest_notifier (vq);int ret; - ret =kvm_irqchip_remove_irqfd_notifier (kvm_state, notifier, - dev->routes.gsi[n]); + ret =kvm_irqchip_remove_irqfd_notifier_gsi (kvm_state, notifier, + dev->routes.gsi[n]);assert (ret ==0 ); }
hw/vfio/pci.c +3 -3
@@ -597,7 +597,7 @@ static void vfio_add_kvm_msi_virq(VFIOMSIVector *vector, MSIMessage *msg,return ; } -if (kvm_irqchip_add_irqfd_notifier (kvm_state, &vector->kvm_interrupt, +if (kvm_irqchip_add_irqfd_notifier_gsi (kvm_state, &vector->kvm_interrupt,NULL , virq) <0 ) {kvm_irqchip_release_virq (kvm_state, virq);event_notifier_cleanup (&vector->kvm_interrupt);
@@ -609,8 +609,8 @@ static void vfio_add_kvm_msi_virq(VFIOMSIVector *vector, MSIMessage *msg,static void vfio_remove_kvm_msi_virq (VFIOMSIVector *vector) { -kvm_irqchip_remove_irqfd_notifier (kvm_state, &vector->kvm_interrupt, - vector->virq); +kvm_irqchip_remove_irqfd_notifier_gsi (kvm_state, &vector->kvm_interrupt, + vector->virq);kvm_irqchip_release_virq (kvm_state, vector->virq); vector->virq =-1 ;event_notifier_cleanup (&vector->kvm_interrupt);
hw/virtio/virtio-pci.c +2 -2
@@ -477,7 +477,7 @@ static int kvm_virtio_pci_irqfd_use(VirtIOPCIProxy *proxy,VirtQueue *vq =virtio_get_queue (vdev, queue_no);EventNotifier *n =virtio_queue_get_guest_notifier (vq);int ret; - ret =kvm_irqchip_add_irqfd_notifier (kvm_state, n,NULL , irqfd->virq); + ret =kvm_irqchip_add_irqfd_notifier_gsi (kvm_state, n,NULL , irqfd->virq);return ret; }
@@ -491,7 +491,7 @@ static void kvm_virtio_pci_irqfd_release(VirtIOPCIProxy *proxy,VirtIOIRQFD *irqfd = &proxy->vector_irqfd[vector];int ret; - ret =kvm_irqchip_remove_irqfd_notifier (kvm_state, n, irqfd->virq); + ret =kvm_irqchip_remove_irqfd_notifier_gsi (kvm_state, n, irqfd->virq);assert (ret ==0 ); }
include/sysemu/kvm.h +4 -3
@@ -414,9 +414,10 @@ void kvm_irqchip_release_virq(KVMState *s, int virq);int kvm_irqchip_add_adapter_route (KVMState *s,AdapterInfo *adapter); -int kvm_irqchip_add_irqfd_notifier (KVMState *s,EventNotifier *n, -EventNotifier *rn,int virq); -int kvm_irqchip_remove_irqfd_notifier (KVMState *s,EventNotifier *n,int virq); +int kvm_irqchip_add_irqfd_notifier_gsi (KVMState *s,EventNotifier *n, +EventNotifier *rn,int virq); +int kvm_irqchip_remove_irqfd_notifier_gsi (KVMState *s,EventNotifier *n, +int virq);void kvm_pc_gsi_handler (void *opaque,int n,int level);void kvm_pc_setup_irq_routing (bool pci_enabled);void kvm_init_irq_routing (KVMState *s);
kvm-all.c +4 -3
@@ -1368,14 +1368,15 @@ int kvm_irqchip_update_msi_route(KVMState *s, int virq, MSIMessage msg) }#endif /* !KVM_CAP_IRQ_ROUTING */ -int kvm_irqchip_add_irqfd_notifier (KVMState *s,EventNotifier *n, -EventNotifier *rn,int virq) +int kvm_irqchip_add_irqfd_notifier_gsi (KVMState *s,EventNotifier *n, +EventNotifier *rn,int virq) {return kvm_irqchip_assign_irqfd (s,event_notifier_get_fd (n), rn ?event_notifier_get_fd (rn) :-1 , virq, true); } -int kvm_irqchip_remove_irqfd_notifier (KVMState *s,EventNotifier *n,int virq) +int kvm_irqchip_remove_irqfd_notifier_gsi (KVMState *s,EventNotifier *n, +int virq) {return kvm_irqchip_assign_irqfd (s,event_notifier_get_fd (n),-1 , virq, false);
kvm-stub.c +4 -3
@@ -137,13 +137,14 @@ int kvm_irqchip_add_adapter_route(KVMState *s, AdapterInfo *adapter)return -ENOSYS ; } -int kvm_irqchip_add_irqfd_notifier (KVMState *s,EventNotifier *n, -EventNotifier *rn,int virq) +int kvm_irqchip_add_irqfd_notifier_gsi (KVMState *s,EventNotifier *n, +EventNotifier *rn,int virq) {return -ENOSYS ; } -int kvm_irqchip_remove_irqfd_notifier (KVMState *s,EventNotifier *n,int virq) +int kvm_irqchip_remove_irqfd_notifier_gsi (KVMState *s,EventNotifier *n, +int virq) {return -ENOSYS ; }
Signature · 1 line
1.8.3.2
PATCH v16 6/9 kvm-all.c: add qemu_irq/gsi hash table and utility routines
In reply to Eric AugerVFIO platform device needs to setup irqfd but it does not know the gsi corresponding to the device qemu_irq. This series proposes to store a hash table in kvm_state using the qemu_irq as key and the gsi as a value.
kvm_irqchip_set_qemuirq_gsi allows to insert such a pair. The interrupt controller is supposed to use it.
kvm_irqchip_[add, remove]_irqfd_notifier allows to setup/tear down irqfd directly from the qemu_irq.
---
v15 -> v16:
- Added Vikram's T-b
v13 -> v14:
- correct checkpatch warning
v2 -> v3 (integration into VFIO series v13):
- rename kvm_irqchip_[add, remove]_qemuirq_irqfd_notifier into kvm_irqchip_[add, remove]_irqfd_notifier. Possible since legacy functions were also renamed with _gsi suffix.
V1 -> v2:
- qemu_irq get_gsi callback replaced by hash table stored in kvm
--- include/sysemu/kvm.h | 6 ++++++ kvm-all.c | 37 +++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+)
include/sysemu/kvm.h +6 -0
@@ -19,6 +19,7 @@#include "qemu/queue.h" #include "qom/cpu.h" #include "exec/memattrs.h" +#include "hw/irq.h" #ifdef CONFIG_KVM #include <linux/kvm.h>
@@ -418,6 +419,11 @@ int kvm_irqchip_add_irqfd_notifier_gsi(KVMState *s, EventNotifier *n, EventNotifier *rn, int virq);int kvm_irqchip_remove_irqfd_notifier_gsi (KVMState *s,EventNotifier *n,int virq); +int kvm_irqchip_add_irqfd_notifier (KVMState *s,EventNotifier *n, +EventNotifier *rn,qemu_irq irq); +int kvm_irqchip_remove_irqfd_notifier (KVMState *s,EventNotifier *n, +qemu_irq irq); +void kvm_irqchip_set_qemuirq_gsi (KVMState *s,qemu_irq irq,int gsi);void kvm_pc_gsi_handler (void *opaque,int n,int level);void kvm_pc_setup_irq_routing (bool pci_enabled);void kvm_init_irq_routing (KVMState *s);
kvm-all.c +37 -0
@@ -37,6 +37,7 @@#include "exec/address-spaces.h" #include "qemu/event_notifier.h" #include "trace.h" +#include "hw/irq.h" #include "hw/boards.h"
@@ -99,6 +100,7 @@ struct KVMState* unsigned, and treating them as signed here can break things */ unsigned irq_set_ioctl;unsigned int sigmask_len; +GHashTable *gsimap;#ifdef KVM_CAP_IRQ_ROUTING struct kvm_irq_routing *irq_routes;int nr_allocated_irq_routes;
@@ -1382,6 +1384,39 @@ int kvm_irqchip_remove_irqfd_notifier_gsi(KVMState *s, EventNotifier *n, false); } +int kvm_irqchip_add_irqfd_notifier (KVMState *s,EventNotifier *n, +EventNotifier *rn,qemu_irq irq) +{ +gpointer key, gsi; +gboolean found =g_hash_table_lookup_extended (s->gsimap, irq, &key, &gsi); + +if (!found) { +return -ENXIO ; + }else { +return kvm_irqchip_add_irqfd_notifier_gsi (s, n, rn, +GPOINTER_TO_UINT (gsi)); + } +} + +int kvm_irqchip_remove_irqfd_notifier (KVMState *s,EventNotifier *n, +qemu_irq irq) +{ +gpointer key, gsi; +gboolean found =g_hash_table_lookup_extended (s->gsimap, irq, &key, &gsi); + +if (!found) { +return -ENXIO ; + }else { +return kvm_irqchip_remove_irqfd_notifier_gsi (s, n, +GPOINTER_TO_INT (gsi)); + } +} + +void kvm_irqchip_set_qemuirq_gsi (KVMState *s,qemu_irq irq,int gsi) +{ +g_hash_table_insert (s->gsimap, irq,GINT_TO_POINTER (gsi)); +} +static int kvm_irqchip_create (MachineState *machine,KVMState *s) {int ret;
@@ -1414,6 +1449,8 @@ static int kvm_irqchip_create(MachineState *machine, KVMState *s)kvm_init_irq_routing (s); + s->gsimap =g_hash_table_new (g_direct_hash, g_direct_equal); +return 0 ; }
Signature · 1 line
1.8.3.2
PATCH v16 7/9 intc: arm_gic_kvm: set the qemu_irq/gsi mapping
In reply to Eric AugerThe arm_gic_kvm now calls kvm_irqchip_set_qemuirq_gsi to build the hash table storing qemu_irq/gsi mappings. From that point on irqfd can be setup directly from the qemu_irq using kvm_irqchip_add_irqfd_notifier.
---
v15 -> v16:
- added Vikram's T-b
- Resolve rebase conflict
v2 -> v3:
- kvm_irqchip_add_qemuirq_irqfd_notifier renamed into kvm_irqchip_add_irqfd_notifier
--- hw/intc/arm_gic_kvm.c | 6 ++++++ 1 file changed, 6 insertions(+)
hw/intc/arm_gic_kvm.c +6 -0
@@ -570,6 +570,12 @@ static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)*/ i += (GIC_INTERNAL * s->num_cpu);qdev_init_gpio_in (dev, kvm_arm_gic_set_irq, i); + +for (i =0 ; i < s->num_irq -GIC_INTERNAL ; i++) { +qemu_irq irq =qdev_get_gpio_in (dev, i); +kvm_irqchip_set_qemuirq_gsi (kvm_state, irq, i); + } +/* We never use our outbound IRQ/FIQ lines but provide them so that * we maintain the same interface as the non-KVM GIC. */
Signature · 1 line
1.8.3.2
PATCH v16 8/9 sysbus: add irq_routing_notifier
In reply to Eric AugerAdd a new connect_irq_notifier notifier in the SysBusDeviceClass. This notifier, if populated, is called after sysbus_connect_irq.
This mechanism is used to setup VFIO signaling once VFIO platform devices get attached to their platform bus, on a machine init done notifier.
---
v15 -> v16:
- add Vikram's T-b
v14 -> v15:
- add Peter R-b
v2 -> v3 (integrated into this series v14):
- rename irq_routing_notifier into connect_irq_notifier
v1 -> v2:
- duly put the notifier in the class and not in the device
--- hw/core/sysbus.c | 6 ++++++ include/hw/sysbus.h | 1 + 2 files changed, 7 insertions(+)
hw/core/sysbus.c +6 -0
@@ -109,7 +109,13 @@ qemu_irq sysbus_get_connected_irq(SysBusDevice *dev, int n)void sysbus_connect_irq (SysBusDevice *dev,int n,qemu_irq irq) { +SysBusDeviceClass *sbd =SYS_BUS_DEVICE_GET_CLASS (dev); +qdev_connect_gpio_out_named (DEVICE (dev),SYSBUS_DEVICE_GPIO_IRQ , n, irq); + +if (sbd->connect_irq_notifier) { + sbd->connect_irq_notifier (dev, irq); + } }/* Check whether an MMIO region exists */
include/hw/sysbus.h +1 -0
@@ -41,6 +41,7 @@ typedef struct SysBusDeviceClass {/*< public >*/ int (*init)(SysBusDevice *dev); +void (*connect_irq_notifier)(SysBusDevice *dev,qemu_irq irq); } SysBusDeviceClass;struct SysBusDevice {
Signature · 1 line
1.8.3.2
PATCH v16 9/9 hw/vfio/platform: add irqfd support
In reply to Eric AugerThis patch aims at optimizing IRQ handling using irqfd framework.
Instead of handling the eventfds on user-side they are handled on kernel side using
- the KVM irqfd framework,
- the VFIO driver virqfd framework.
the virtual IRQ completion is trapped at interrupt controller This removes the need for fast/slow path swap.
Overall this brings significant performance improvements.
---
v15 -> v16:
- add Vikram's T-b
v13 -> v14:
- use connect_irq_notifier
- remove trace_vfio_platform_start_eventfd
v12 -> v13:
- setup the new mechanism for starting irqfd, based on LinkPropertySetter override
- use kvm_irqchip_[add,remove]_irqfd_notifier new functions: no need to bother about gsi (hence virtualID could be removed with small change in trace-events)
v10 -> v11:
- Add Alex' Reviewed-by
- introduce kvm_accel in this patch and initialize it
v5 -> v6
- rely on kvm_irqfds_enabled() and kvm_resamplefds_enabled()
- guard KVM code with #ifdef CONFIG_KVM
v3 -> v4:
[Alvise Rigo]
Use of VFIO Platform driver v6 unmask/virqfd feature and removal of resamplefd handler. Physical IRQ unmasking is now done in VFIO driver.
v3:
[Eric Auger]
initial support with resamplefd handled on QEMU side since the unmask was not supported on VFIO platform driver v5.
--- hw/vfio/platform.c | 107 ++++++++++++++++++++++++++++++++++++++++ include/hw/vfio/vfio-platform.h | 2 + trace-events | 1 + 3 files changed, 110 insertions(+)
hw/vfio/platform.c +107 -0
@@ -26,6 +26,7 @@#include "hw/sysbus.h" #include "trace.h" #include "hw/platform-bus.h" +#include "sysemu/kvm.h" /* * Functions used whatever the injection method
@@ -51,6 +52,7 @@ static VFIOINTp *vfio_init_intp(VFIODevice *vbasedev, intp->pin = info.index; intp->flags = info.flags; intp->state =VFIO_IRQ_INACTIVE ; + intp->kvm_accel = false;sysbus_init_irq (sbdev, &intp->qemuirq);
@@ -61,6 +63,13 @@ static VFIOINTp *vfio_init_intp(VFIODevice *vbasedev,error_report ("vfio: Error: trigger event_notifier_init failed " );return NULL ; } +/* Get an eventfd for resample/unmask */ + ret =event_notifier_init (&intp->unmask,0 ); +if (ret) { +g_free (intp); +error_report ("vfio: Error: resample event_notifier_init failed eoi" ); +return NULL ; + }QLIST_INSERT_HEAD (&vdev->intp_list, intp, next);return intp;
@@ -315,6 +324,95 @@ static int vfio_start_eventfd_injection(VFIOINTp *intp)return ret; } +/* +* Functions used for irqfd +*/ + +#ifdef CONFIG_KVM + +/** +* vfio_set_resample_eventfd - sets the resamplefd for an IRQ +* @intp: the IRQ struct handle +* programs the VFIO driver to unmask this IRQ when the +* intp->unmask eventfd is triggered +*/ +static int vfio_set_resample_eventfd (VFIOINTp *intp) +{ +VFIODevice *vbasedev = &intp->vdev->vbasedev; +struct vfio_irq_set *irq_set; +int argsz, ret; +int32_t *pfd; + + argsz =sizeof (*irq_set) +sizeof (*pfd); + irq_set =g_malloc0 (argsz); + irq_set->argsz = argsz; + irq_set->flags =VFIO_IRQ_SET_DATA_EVENTFD |VFIO_IRQ_SET_ACTION_UNMASK ; + irq_set->index = intp->pin; + irq_set->start =0 ; + irq_set->count =1 ; + pfd = (int32_t *)&irq_set->data; + *pfd =event_notifier_get_fd (&intp->unmask); +qemu_set_fd_handler (*pfd,NULL ,NULL ,NULL ); + ret =ioctl (vbasedev->fd,VFIO_DEVICE_SET_IRQS , irq_set); +g_free (irq_set); +if (ret <0 ) { +error_report ("vfio: Failed to set resample eventfd: %m" ); + } +return ret; +} + +static void vfio_start_irqfd_injection (SysBusDevice *sbdev,qemu_irq irq) +{ +VFIOPlatformDevice *vdev =VFIO_PLATFORM_DEVICE (sbdev); +VFIOINTp *intp; +bool found = false; + + QLIST_FOREACH(intp, &vdev->intp_list, next) { +if (intp->qemuirq == irq) { + found = true; +break ; + } + } +assert (found); + +/* Get to a known interrupt state */ +qemu_set_fd_handler (event_notifier_get_fd (&intp->interrupt), +NULL ,NULL , vdev); + +vfio_mask_single_irqindex (&vdev->vbasedev, intp->pin); +qemu_set_irq (intp->qemuirq,0 ); + +if (kvm_irqchip_add_irqfd_notifier (kvm_state, &intp->interrupt, + &intp->unmask, irq) <0 ) { + goto fail_irqfd; + } + +if (vfio_set_trigger_eventfd (intp,NULL ) <0 ) { + goto fail_vfio; + } +if (vfio_set_resample_eventfd (intp) <0 ) { + goto fail_vfio; + } + +/* Let'em rip */ +vfio_unmask_single_irqindex (&vdev->vbasedev, intp->pin); + + intp->kvm_accel = true; + +trace_vfio_platform_start_irqfd_injection (intp->pin, +event_notifier_get_fd (&intp->interrupt), +event_notifier_get_fd (&intp->unmask)); +return ; +fail_vfio: +kvm_irqchip_remove_irqfd_notifier (kvm_state, &intp->interrupt, irq); +fail_irqfd: +vfio_start_eventfd_injection (intp); +vfio_unmask_single_irqindex (&vdev->vbasedev, intp->pin); +return ; +} + +#endif /* CONFIG_KVM */ +/* VFIO skeleton */ static void vfio_platform_compute_needs_reset (VFIODevice *vbasedev)
@@ -549,6 +647,7 @@ static void vfio_platform_realize(DeviceState *dev, Error **errp) {VFIOPlatformDevice *vdev =VFIO_PLATFORM_DEVICE (dev);SysBusDevice *sbdev =SYS_BUS_DEVICE (dev); +SysBusDeviceClass *sbc =SYS_BUS_DEVICE_GET_CLASS (dev);VFIODevice *vbasedev = &vdev->vbasedev;VFIOINTp *intp;int i, ret;
@@ -556,6 +655,13 @@ static void vfio_platform_realize(DeviceState *dev, Error **errp) vbasedev->type =VFIO_DEVICE_TYPE_PLATFORM ; vbasedev->ops = &vfio_platform_ops; +#ifdef CONFIG_KVM +if (kvm_irqfds_enabled () &&kvm_resamplefds_enabled () && + vdev->irqfd_allowed) { + sbc->connect_irq_notifier = vfio_start_irqfd_injection; + } +#endif +trace_vfio_platform_realize (vbasedev->name, vdev->compat); ret =vfio_base_device_init (vbasedev);
@@ -585,6 +691,7 @@ static Property vfio_platform_dev_properties[] = {DEFINE_PROP_BOOL ("x-mmap" , VFIOPlatformDevice, vbasedev.allow_mmap, true),DEFINE_PROP_UINT32 ("mmap-timeout-ms" , VFIOPlatformDevice, mmap_timeout,1100 ), +DEFINE_PROP_BOOL ("x-irqfd" , VFIOPlatformDevice, irqfd_allowed, true), DEFINE_PROP_END_OF_LIST(), };
include/hw/vfio/vfio-platform.h +2 -0
@@ -41,6 +41,7 @@ typedef struct VFIOINTp {int state;/* inactive, pending, active */ uint8_t pin;/* index */ uint32_t flags;/* IRQ info flags */ +bool kvm_accel;/* set when QEMU bypass through KVM enabled */ } VFIOINTp;/* function type for user side eventfd handler */
@@ -57,6 +58,7 @@ typedef struct VFIOPlatformDevice {uint32_t mmap_timeout;/* delay to re-enable mmaps after interrupt */ QEMUTimer *mmap_timer;/* allows fast-path resume after IRQ hit */ QemuMutex intp_mutex;/* protect the intp_list IRQ state */ +bool irqfd_allowed;/* debug option to force irqfd on/off */ } VFIOPlatformDevice; typedef struct VFIOPlatformDeviceClass {
trace-events +1 -0
@@ -1571,6 +1571,7 @@ vfio_platform_intp_interrupt(int pin, int fd) "Inject IRQ #%d (fd = %d)" vfio_platform_intp_inject_pending_lockheld(int pin, int fd) "Inject pending IRQ #%d (fd = %d)" vfio_platform_populate_interrupts(int pin, int count, int flags) "- IRQ index %d: count %d, flags=0x%x" vfio_intp_interrupt_set_pending(int index) "irq %d is set PENDING" +vfio_platform_start_irqfd_injection(int index, int fd, int resamplefd) "IRQ index=%d, fd = %d, resamplefd = %d" #hw/acpi/memory_hotplug.c mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
Signature · 6 lines
1.8.3.2 _______________________________________________ kvmarm mailing list [email protected] https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
Quoted 11 lines · Eric Auger
This series aims at enabling KVM platform device passthrough.
On kernel side, the vfio platform driver is needed, available from 4.1-rc1 onwards.
This series now only relies on the following QEMU series, for dynamic instantiation of the VFIO platform device from qemu command line:
[1] [PATCH v12 0/4] machvirt dynamic sysbus device instantiation
http://comments.gmane.org/gmane.comp.emulators.kvm.arm.devel/886
Hi Eric,
Now that your pre-req above is in, how do you want to proceed with this series. Patches 1-3 are entirely in vfio space, so I can sign-off and request a pull of those. I think that gives you basic functionality, modulo dynamic instantiation of xgmac. Patches 4-8 need to go in through or at least be ack'd by their respective maintainers before I can get to patch 9. Let me know. Thanks,
Alex
Quoted 250 lines
Both series are candidate for QEMU 2.4 and available at
http://git.linaro.org/people/eric.auger/qemu.git
(branchvfio_integ_v16)The series was tested on Calxeda Midway (ARMv7) where one xgmac is assigned to KVM host while the second one is assigned to the guest.
Wiki for Calxeda Midway setup:
https://wiki.linaro.org/LEG/Engineering/Virtualization/Platform_Device_Passthrough_on_MidwayTested by Vikram Sethi on a device featuring 2 MMIO regions. Code also exercised successfully by VOSYS for AMBA derivative series.
Best Regards
Eric
History:
v15 -> v16:
- no code change
- add Vikram's T-b
- rebase on 0915aed
- remove linux header update patch filev14 -> v15:
- add Peter R-b on sysbus: addirq_routing_notifier
- correctg_malloc0_nusage in skeleton
- correct return values of reset related functions
- include Cornelia's patch for header updatev13 -> v14:
- remove v13 9, 10, 11 patch files and replace them by a single patch file "sysbus: addirq_routing_notifier".
- in skeleton, fix ENAMETOOLONG sign
- remove VFIOINTp virtualID in "add irq assignment" patch file
- removedtrace_vfio_platform_start_eventfdv12 -> v13:
- header update but same update was already sent by Cornelia
- Rework VFIO signaling & irqfd setup: restored 2-step setup featuring eventfd setup on realize and then irqfd setup on irq binding.
- irqfd setup now useskvm_irqchip_add_irqfd_notifierand sysbusirq_set_hookoverride. This leads to the introduction of 6 patch files enabling those 2 features. Paolo advised to introducekvm_irqchip_add_irqfd_notifierseries in the VFIO one. I did the same forirq_set_hookseries but if it is better I can submit it aside.
- above changes made possible to remove
x hw/vfio/platform: add capability to start IRQ propagation" x hw/arm/virt: start VFIO IRQ propagation
- insysbus-fdt.c, useplatform_bus_get_mmio_addrinstead of deprecated mmio[0] property. Thanks to Bharat who pointed this issue out. alsocpu_to_be32was used for size and base (Vikram input) .
- in skeleton misc corrections following Alex review.
v11->v12:
- add x-mmap property definition, without which the default value of vbasedev.allow_mmap is false, hence preventing the reg space from being mmapped.
v10->v11:
- rebase onto v2.3.0-rc0 (mainly related to PCIe support in virt)
- add dma-coherent property for calxeda midway (fix revealed by removal of kernel-side "vfio: type1: support for ARM SMMUS withVFIO_IOMMU_TYPE1")
- virt modifications to start VFIO IRQ forwarding are now in a separate patch
- rearrange linux header exports (those are still partial exports waiting for definitive 4.1-rc0)
- take into account Alex Bennée comments:
- useg_malloc0_ninstead ofg_malloc0
- use block declarations when possible
- rework readlink returned value treatment
- useg_strlcatin place strncat
- re-arrange mutex locking for multiple IRQ support (user-side handled eventfds)
- useg_snprintfinstead of snprintf
- change the order of functions to avoid pre-declaration inplatform.c
- add flags in VFIOINTp struct to detect whether the IRQ is automasked
- some comment rewriting
v9->v10:
- rebase on "vfio: cleanupvfio_get_deviceerror path, removevfio_populate_device":vfio_populate_deviceno more called invfio_get_devicebut invfio_base_device_init
- update VFIO header according to vfio platform driver v13 (no AMBA)
v8->v9:
- rebase on 2.2.0 and machvirt dynamic sysbus instantiation v10
- v8 1-11 were pulled
- patch files related to forwarding are moved in a seperate series since it depends on kernel series still in RFC.
- introduction of basic VFIO platform device split into 3 patch files to ease the review (hope it will help).
- add an author inplatform.c
- add deallocation invfio_populate_deviceerror case
- add patch file doing the VFIO header sync
- useVFIO_DEVICE_FLAGS_PLATFORMinvfio_populate_device
- renamecalxeda_xgmac.cintocalxeda-xgmac.c
- sysbus-fdt:add_calxeda_midway_xgmac_fdt_nodeg_freein case of errors
- reword of linux-headers patch files
v7->v8:
- rebase on v2.2.0-rc3 and integrate
"Addskip_dumpflag to ignore memory region during dump"
- KVM header evolution with subindex addition inkvm_arch_forwarded_irq
- split [PATCH v7 03/16] hw/vfio/pci: introduce VFIODevice into 4 patches
-vfio_compute_needs_resetdoes not return bool anymore
- add some comments about exposed MMIO region and IRQ in calxeda xgmac device
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- rework IRQ startup: former machine init done notifier is replaced by a reset notifier. machine file passes the interrupt controller DeviceState handle (not the platform bus first irq parameter).
- sysbus-fdt:
- move theadd_fdt_node_functionsarray declaration between the device specific code and the generic code to avoid forward declarations of decice specific functions
- renameadd_basic_vfio_fdt_nodeintoadd_calxeda_midway_xgmac_fdt_nodeemphasizing the fact it is xgmac specific
v6->v7:
- fake injection test modality removed
-VFIO_DEVICE_TYPE_PLATFORMonly introduced with VFIO platform
- new helper functions to start VFIO IRQ on machine init done notifier (introduced in hw/vfio/platform: add vfio-platform support and notifier registration invoked in hw/arm/virt: add support for VFIO devices).vfio_start_irq_injectionis replaced byvfio_register_irq_starter.
v5->v6:
- rebase on 2.1rc5 PCI code
- forwarded IRQ first integraton
-vfio_deviceproperty renamed into host property
- split IRQ setup in different functions that match the 3 supported injection techniques (user handled eventfd, irqfd, forwarded IRQ):
removes dynamic switch between injection methods
- introduce fake interrupts as a test modality:
x makes possible to test multiple IRQ user-side handling. x this is a test feature only: enable to trigger a fd as if the
real physical IRQ hit. No virtual IRQ is injected into the guest but handling is simulated so that the state machine can be tested
- user handled eventfd:
x add mutex to protect IRQ state & list manipulation,
x correct misleading comment invfio_intp_interrupt.
x Fix bugs using fake interrupt modality
- irqfd no more advertised in this patchset (handled in [3])
- VFIOPlatformDeviceClass becomes abstract and Calxeda xgmac device and class is re-introduced (as per v4)
- all DPRINTF removed in platform and replaced by trace-points
- corrects compilation with configure --disable-kvm
- simplifies the split forvfio_get_deviceand introduce a unique specialized function namedvfio_populate_device
-group_listrenamed intovfio_group_list
-hw/arm/dyn_sysbus_devtree.ccurrently only support vfio-calxeda-xgmac instantiation. Needs to be specialized for other VFIO devices
- fix 2 bugs indyn_sysbus_devtree(reg_attr index and compat)
v4->v5:
- rebase on v2.1.0 PCI code
- take into account Alex Williamson comments on PCI code rework
- trace updates in vfio_region_write/read
- remove fd from VFIORegion
- get/put ckeanup
- bug fix: bar region's vbasedev field duly initialization
- misc cleanups in platform device
- device tree node generation removed from device and handled inhw/arm/dyn_sysbus_devtree.c
- remove "hw/vfio: add an examplecalxeda_xgmac": with removal of device tree node generation we do not have so many things to implement in that derived device yet. May be re-introduced later on if needed typically for reset/migration.
- no GSI routing table anymore
v3->v4changes (Eric Auger, Alvise Rigo)
- rebase on last VFIO PCI code (v2.1.0-rc0)
- full git history rework to ease PCI code change review
- mv include files in hw/vfio
- DPRINTF reformatting temporarily moved out
- support of VFIO virq (removal of resamplefd handler on user-side)
- integration with sysbus dynamic instantiation framwork
- removal of unrealize and cleanup routines until it is better understood what is really needed
- Support of VFIO for Amba devices should be handled in an inherited device to specialize the device tree generation (clock handle currently missing in framework however)
- "Always use eventfd as notifying mechanism" temporarily moved out
- static instantiation is not mainstream (although it remains possible) note if static instantiation is used, irqfd must be setup in machine file when virtual IRQ is known
- create the GSI routing table on qemu side
v2->v3changes (Alvise Rigo, Eric Auger):
- Following Alex W recommandations, further efforts to factorize the code between PCI:introduction of VFIODevice and VFIORegion as base classes
- unique reset handler for platform and PCI
- cleanup following Kim's comments
- multiple IRQ support mechanics should be in place although not tested
- Better handling of MMIO multiple regions
- New features and fixes by Alvise (multiple compat string, exec flag, force eventfd usage, amba device tree support)
- irqfd support
v1->v2changes (Kim Phillips, Eric Auger):
- IRQ initial support (legacy mode where eventfds are handled on user side)
- hacked dynamic instantiationv1 (Kim Phillips):
- initial split between PCI and platform
- MMIO support only
- static instantiationEric Auger (9):
hw/vfio/platform: vfio-platform skeleton hw/vfio/platform: add irq assignment
hw/vfio/platform: calxeda xgmac device hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation
kvm: rename kvm_irqchip_[add,remove]_irqfd_notifier with gsi suffixkvm-all.c: add qemu_irq/gsi hash table and utility routines
intc:arm_gic_kvm: set the qemu_irq/gsi mapping
sysbus: addirq_routing_notifier
hw/vfio/platform: add irqfd supporthw/arm/sysbus-fdt.c | 72 ++++ hw/core/sysbus.c | 6 + hw/intc/arm_gic_kvm.c | 6 + hw/s390x/virtio-ccw.c | 8 +- hw/vfio/Makefile.objs | 2 + hw/vfio/calxeda-xgmac.c | 54 +++ hw/vfio/pci.c | 6 +- hw/vfio/platform.c | 723 +++++++++++++++++++++++++++++++++++ hw/virtio/virtio-pci.c | 4 +- include/hw/sysbus.h | 1 + include/hw/vfio/vfio-calxeda-xgmac.h | 46 +++ include/hw/vfio/vfio-common.h | 1 + include/hw/vfio/vfio-platform.h | 77 ++++ include/sysemu/kvm.h | 11 +- kvm-all.c | 44 ++- kvm-stub.c | 7 +- trace-events | 13 + 17 files changed, 1064 insertions(+), 17 deletions(-) create mode 100644 hw/vfio/calxeda-xgmac.c create mode 100644 hw/vfio/platform.c create mode 100644 include/hw/vfio/vfio-calxeda-xgmac.h create mode 100644 include/hw/vfio/vfio-platform.h
Hi Alex,
Quoted 14 lines · Alex Williamson
Quoted 11 lines · Eric Auger
This series aims at enabling KVM platform device passthrough.
On kernel side, the vfio platform driver is needed, available from 4.1-rc1 onwards.
This series now only relies on the following QEMU series, for dynamic instantiation of the VFIO platform device from qemu command line:
[1] [PATCH v12 0/4] machvirt dynamic sysbus device instantiation
http://comments.gmane.org/gmane.comp.emulators.kvm.arm.devel/886
Quoted 5 lines
Hi Eric,
Now that your pre-req above is in, how do you want to proceed with this series. Patches 1-3 are entirely in vfio space, so I can sign-off and request a pull of those.
Thanks for this email ;-) Indeed I would be definitively happy to see this series landing in 2.4.
- Yes I would be grateful to you if you could handle patches 1-3.
- 4 is in continuation of pre-req series so Peter might be the best candidate for acking that one
- Then Paolo gave guidance & followed 4-8 so he might be the best candidate for acking those
- and eventually 9 for you again ;-)
Thanks
Best Regards
Eric
I think that gives you basic functionality,
Quoted 4 lines
modulo dynamic instantiation of xgmac. Patches 4-8 need to go in through or at least be ack'd by their respective maintainers before I can get to patch 9. Let me know. Thanks,
Quoted 255 lines
Alex
Quoted 250 lines
Both series are candidate for QEMU 2.4 and available at
http://git.linaro.org/people/eric.auger/qemu.git
(branchvfio_integ_v16)The series was tested on Calxeda Midway (ARMv7) where one xgmac is assigned to KVM host while the second one is assigned to the guest.
Wiki for Calxeda Midway setup:
https://wiki.linaro.org/LEG/Engineering/Virtualization/Platform_Device_Passthrough_on_MidwayTested by Vikram Sethi on a device featuring 2 MMIO regions. Code also exercised successfully by VOSYS for AMBA derivative series.
Best Regards
Eric
History:
v15 -> v16:
- no code change
- add Vikram's T-b
- rebase on 0915aed
- remove linux header update patch filev14 -> v15:
- add Peter R-b on sysbus: addirq_routing_notifier
- correctg_malloc0_nusage in skeleton
- correct return values of reset related functions
- include Cornelia's patch for header updatev13 -> v14:
- remove v13 9, 10, 11 patch files and replace them by a single patch file "sysbus: addirq_routing_notifier".
- in skeleton, fix ENAMETOOLONG sign
- remove VFIOINTp virtualID in "add irq assignment" patch file
- removedtrace_vfio_platform_start_eventfdv12 -> v13:
- header update but same update was already sent by Cornelia
- Rework VFIO signaling & irqfd setup: restored 2-step setup featuring eventfd setup on realize and then irqfd setup on irq binding.
- irqfd setup now useskvm_irqchip_add_irqfd_notifierand sysbusirq_set_hookoverride. This leads to the introduction of 6 patch files enabling those 2 features. Paolo advised to introducekvm_irqchip_add_irqfd_notifierseries in the VFIO one. I did the same forirq_set_hookseries but if it is better I can submit it aside.
- above changes made possible to remove
x hw/vfio/platform: add capability to start IRQ propagation" x hw/arm/virt: start VFIO IRQ propagation
- insysbus-fdt.c, useplatform_bus_get_mmio_addrinstead of deprecated mmio[0] property. Thanks to Bharat who pointed this issue out. alsocpu_to_be32was used for size and base (Vikram input) .
- in skeleton misc corrections following Alex review.
v11->v12:
- add x-mmap property definition, without which the default value of vbasedev.allow_mmap is false, hence preventing the reg space from being mmapped.
v10->v11:
- rebase onto v2.3.0-rc0 (mainly related to PCIe support in virt)
- add dma-coherent property for calxeda midway (fix revealed by removal of kernel-side "vfio: type1: support for ARM SMMUS withVFIO_IOMMU_TYPE1")
- virt modifications to start VFIO IRQ forwarding are now in a separate patch
- rearrange linux header exports (those are still partial exports waiting for definitive 4.1-rc0)
- take into account Alex Bennée comments:
- useg_malloc0_ninstead ofg_malloc0
- use block declarations when possible
- rework readlink returned value treatment
- useg_strlcatin place strncat
- re-arrange mutex locking for multiple IRQ support (user-side handled eventfds)
- useg_snprintfinstead of snprintf
- change the order of functions to avoid pre-declaration inplatform.c
- add flags in VFIOINTp struct to detect whether the IRQ is automasked
- some comment rewriting
v9->v10:
- rebase on "vfio: cleanupvfio_get_deviceerror path, removevfio_populate_device":vfio_populate_deviceno more called invfio_get_devicebut invfio_base_device_init
- update VFIO header according to vfio platform driver v13 (no AMBA)
v8->v9:
- rebase on 2.2.0 and machvirt dynamic sysbus instantiation v10
- v8 1-11 were pulled
- patch files related to forwarding are moved in a seperate series since it depends on kernel series still in RFC.
- introduction of basic VFIO platform device split into 3 patch files to ease the review (hope it will help).
- add an author inplatform.c
- add deallocation invfio_populate_deviceerror case
- add patch file doing the VFIO header sync
- useVFIO_DEVICE_FLAGS_PLATFORMinvfio_populate_device
- renamecalxeda_xgmac.cintocalxeda-xgmac.c
- sysbus-fdt:add_calxeda_midway_xgmac_fdt_nodeg_freein case of errors
- reword of linux-headers patch files
v7->v8:
- rebase on v2.2.0-rc3 and integrate
"Addskip_dumpflag to ignore memory region during dump"
- KVM header evolution with subindex addition inkvm_arch_forwarded_irq
- split [PATCH v7 03/16] hw/vfio/pci: introduce VFIODevice into 4 patches
-vfio_compute_needs_resetdoes not return bool anymore
- add some comments about exposed MMIO region and IRQ in calxeda xgmac device
- vfio_[un]mask_irqindex renamed into vfio_[un]mask_single_irqindex
- rework IRQ startup: former machine init done notifier is replaced by a reset notifier. machine file passes the interrupt controller DeviceState handle (not the platform bus first irq parameter).
- sysbus-fdt:
- move theadd_fdt_node_functionsarray declaration between the device specific code and the generic code to avoid forward declarations of decice specific functions
- renameadd_basic_vfio_fdt_nodeintoadd_calxeda_midway_xgmac_fdt_nodeemphasizing the fact it is xgmac specific
v6->v7:
- fake injection test modality removed
-VFIO_DEVICE_TYPE_PLATFORMonly introduced with VFIO platform
- new helper functions to start VFIO IRQ on machine init done notifier (introduced in hw/vfio/platform: add vfio-platform support and notifier registration invoked in hw/arm/virt: add support for VFIO devices).vfio_start_irq_injectionis replaced byvfio_register_irq_starter.
v5->v6:
- rebase on 2.1rc5 PCI code
- forwarded IRQ first integraton
-vfio_deviceproperty renamed into host property
- split IRQ setup in different functions that match the 3 supported injection techniques (user handled eventfd, irqfd, forwarded IRQ):
removes dynamic switch between injection methods
- introduce fake interrupts as a test modality:
x makes possible to test multiple IRQ user-side handling. x this is a test feature only: enable to trigger a fd as if the
real physical IRQ hit. No virtual IRQ is injected into the guest but handling is simulated so that the state machine can be tested
- user handled eventfd:
x add mutex to protect IRQ state & list manipulation,
x correct misleading comment invfio_intp_interrupt.
x Fix bugs using fake interrupt modality
- irqfd no more advertised in this patchset (handled in [3])
- VFIOPlatformDeviceClass becomes abstract and Calxeda xgmac device and class is re-introduced (as per v4)
- all DPRINTF removed in platform and replaced by trace-points
- corrects compilation with configure --disable-kvm
- simplifies the split forvfio_get_deviceand introduce a unique specialized function namedvfio_populate_device
-group_listrenamed intovfio_group_list
-hw/arm/dyn_sysbus_devtree.ccurrently only support vfio-calxeda-xgmac instantiation. Needs to be specialized for other VFIO devices
- fix 2 bugs indyn_sysbus_devtree(reg_attr index and compat)
v4->v5:
- rebase on v2.1.0 PCI code
- take into account Alex Williamson comments on PCI code rework
- trace updates in vfio_region_write/read
- remove fd from VFIORegion
- get/put ckeanup
- bug fix: bar region's vbasedev field duly initialization
- misc cleanups in platform device
- device tree node generation removed from device and handled inhw/arm/dyn_sysbus_devtree.c
- remove "hw/vfio: add an examplecalxeda_xgmac": with removal of device tree node generation we do not have so many things to implement in that derived device yet. May be re-introduced later on if needed typically for reset/migration.
- no GSI routing table anymore
v3->v4changes (Eric Auger, Alvise Rigo)
- rebase on last VFIO PCI code (v2.1.0-rc0)
- full git history rework to ease PCI code change review
- mv include files in hw/vfio
- DPRINTF reformatting temporarily moved out
- support of VFIO virq (removal of resamplefd handler on user-side)
- integration with sysbus dynamic instantiation framwork
- removal of unrealize and cleanup routines until it is better understood what is really needed
- Support of VFIO for Amba devices should be handled in an inherited device to specialize the device tree generation (clock handle currently missing in framework however)
- "Always use eventfd as notifying mechanism" temporarily moved out
- static instantiation is not mainstream (although it remains possible) note if static instantiation is used, irqfd must be setup in machine file when virtual IRQ is known
- create the GSI routing table on qemu side
v2->v3changes (Alvise Rigo, Eric Auger):
- Following Alex W recommandations, further efforts to factorize the code between PCI:introduction of VFIODevice and VFIORegion as base classes
- unique reset handler for platform and PCI
- cleanup following Kim's comments
- multiple IRQ support mechanics should be in place although not tested
- Better handling of MMIO multiple regions
- New features and fixes by Alvise (multiple compat string, exec flag, force eventfd usage, amba device tree support)
- irqfd support
v1->v2changes (Kim Phillips, Eric Auger):
- IRQ initial support (legacy mode where eventfds are handled on user side)
- hacked dynamic instantiationv1 (Kim Phillips):
- initial split between PCI and platform
- MMIO support only
- static instantiationEric Auger (9):
hw/vfio/platform: vfio-platform skeleton hw/vfio/platform: add irq assignment
hw/vfio/platform: calxeda xgmac device hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation
kvm: rename kvm_irqchip_[add,remove]_irqfd_notifier with gsi suffixkvm-all.c: add qemu_irq/gsi hash table and utility routines
intc:arm_gic_kvm: set the qemu_irq/gsi mapping
sysbus: addirq_routing_notifier
hw/vfio/platform: add irqfd supporthw/arm/sysbus-fdt.c | 72 ++++ hw/core/sysbus.c | 6 + hw/intc/arm_gic_kvm.c | 6 + hw/s390x/virtio-ccw.c | 8 +- hw/vfio/Makefile.objs | 2 + hw/vfio/calxeda-xgmac.c | 54 +++ hw/vfio/pci.c | 6 +- hw/vfio/platform.c | 723 +++++++++++++++++++++++++++++++++++ hw/virtio/virtio-pci.c | 4 +- include/hw/sysbus.h | 1 + include/hw/vfio/vfio-calxeda-xgmac.h | 46 +++ include/hw/vfio/vfio-common.h | 1 + include/hw/vfio/vfio-platform.h | 77 ++++ include/sysemu/kvm.h | 11 +- kvm-all.c | 44 ++- kvm-stub.c | 7 +- trace-events | 13 + 17 files changed, 1064 insertions(+), 17 deletions(-) create mode 100644 hw/vfio/calxeda-xgmac.c create mode 100644 hw/vfio/platform.c create mode 100644 include/hw/vfio/vfio-calxeda-xgmac.h create mode 100644 include/hw/vfio/vfio-platform.h
_______________________________________________
kvmarm mailing list
[email protected]
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm