tests/pm_backlight: Add backlight test
PATCH v2 1/1 tests/pm_backlight: Add backlight test
This is a basic sanity test of the backlight sysfs interface.
v2:
- Add jani's suggestion for immediate readback
- Remove unused parameter from test_and_verify()
- Add fade test
Issue: VIZ-3377
Signed-off-by Antti Koskipaa <[email protected]>
--- tests/.gitignore | 1 + tests/Makefile.sources | 1 + tests/pm_backlight.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 173 insertions(+) create mode 100644 tests/pm_backlight.c
tests/.gitignore +1 -0
@@ -150,6 +150,7 @@ kms_vblank kms_crtc_background_color kms_plane_scaling kms_panel_fitting +pm_backlight pm_lpsp pm_rc6_residency pm_rpm
tests/Makefile.sources +1 -0
@@ -80,6 +80,7 @@ TESTS_progs_M = \ kms_crtc_background_color \ kms_plane_scaling \ kms_panel_fitting \ + pm_backlight \ pm_lpsp \ pm_rpm \ pm_rps \
tests/pm_backlight.c new file +171 -0
171 lines not on this page · raw message
Signature · 6 lines
1.8.3.2 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · Antti Koskipaa
This is a basic sanity test of the backlight sysfs interface.
v2:
- Add jani's suggestion for immediate readback
- Remove unused parameter fromtest_and_verify()
- Add fade testIssue: VIZ-3377
Signed-off-by Antti Koskipaa <[email protected]>
Reviewed-by Jani Nikula <[email protected]>
Quoted 211 lines
--- tests/.gitignore | 1 + tests/Makefile.sources | 1 + tests/pm_backlight.c | 171 +++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 173 insertions(+) create mode 100644 tests/pm_backlight.ctests/.gitignore +1
-0@@ -150,6 +150,7 @@ kms_vblank kms_crtc_background_color kms_plane_scaling kms_panel_fitting +pm_backlight pm_lpsp pm_rc6_residency pm_rpmtests/Makefile.sources +1
-0@@ -80,6 +80,7 @@ TESTS_progs_M = \ kms_crtc_background_color \ kms_plane_scaling \ kms_panel_fitting \ + pm_backlight \ pm_lpsp \ pm_rpm \ pm_rps \tests/pm_backlight.c new file +171
-0@@ -0,0 +1,171 @@ +/* +* Copyright © 2015 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS +* IN THE SOFTWARE. +* +* Author: +* Antti Koskipaa <[email protected]> +* +*/ + +#include <limits.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <stdio.h> +#include <errno.h> +#include <unistd.h> +#include <time.h> + +#include "igt_core.h" + +#define TOLERANCE 5/* percent */ +#define BACKLIGHT_PATH "/sys/class/backlight/intel_backlight" + +#define FADESTEPS 10 +#define FADESPEED 100/* milliseconds between steps */ + +IGT_TEST_DESCRIPTION ("Basic backlight sysfs test" ); + +static int backlight_read (int *result,const char *fname) +{ +int fd; +char full[PATH_MAX ]; +char dst[64 ]; +int r, e; + +igt_assert (snprintf (full,PATH_MAX ,"%s/%s" ,BACKLIGHT_PATH , fname) <PATH_MAX ); + + fd =open (full,O_RDONLY ); +if (fd ==-1 ) +return -errno; + + r =read (fd, dst,sizeof (dst)); + e = errno; +close (fd); + +if (r <0 ) +return -e; + + errno =0 ; + *result =strtol (dst,NULL ,10 ); +return errno; +} + +static int backlight_write (int value,const char *fname) +{ +int fd; +char full[PATH_MAX ]; +char src[64 ]; +int len; + +igt_assert (snprintf (full,PATH_MAX ,"%s/%s" ,BACKLIGHT_PATH , fname) <PATH_MAX ); + fd =open (full,O_WRONLY ); +if (fd ==-1 ) +return -errno; + + len =snprintf (src,sizeof (src),"%i" , value); + len =write (fd, src, len); +close (fd); + +if (len <0 ) +return len; + +return 0 ; +} + +static void test_and_verify (int val) +{ +int result; + +igt_assert (backlight_write (val,"brightness" ) ==0 ); +igt_assert (backlight_read (&result,"brightness" ) ==0 ); +/* Check that the exact value sticks */ +igt_assert (result == val); + +igt_assert (backlight_read (&result,"actual_brightness" ) ==0 ); +/* Some rounding may happen depending on hw. Just check that it's close enough. */ +igt_assert (result <= val + val *TOLERANCE /100 && result >= val - val *TOLERANCE /100 ); +} + +static void test_brightness (int max) +{ +test_and_verify (0 ); +test_and_verify (max); +test_and_verify (max /2 ); +} + +static void test_bad_brightness (int max) +{ +int val; +/* First write some sane value */ +backlight_write (max /2 ,"brightness" ); +/* Writing invalid values should fail and not change the value */ +igt_assert (backlight_write (-1 ,"brightness" ) <0 ); +backlight_read (&val,"brightness" ); +igt_assert (val == max /2 ); +igt_assert (backlight_write (max +1 ,"brightness" ) <0 ); +backlight_read (&val,"brightness" ); +igt_assert (val == max /2 ); +igt_assert (backlight_write (INT_MAX ,"brightness" ) <0 ); +backlight_read (&val,"brightness" ); +igt_assert (val == max /2 ); +} + +static void test_fade (int max) +{ +int i; +static const struct timespec ts = { .tv_sec =0 , .tv_nsec =FADESPEED *1000000 }; + +/* Fade out, then in */ +for (i = max; i >0 ; i -= max /FADESTEPS ) { +test_and_verify (i); +nanosleep (&ts,NULL ); + } +for (i =0 ; i <= max; i += max /FADESTEPS ) { +test_and_verify (i); +nanosleep (&ts,NULL ); + } +} + +igt_main +{ +int max, old; + +igt_skip_on_simulation (); + + igt_fixture { +/* Get the max value and skip the whole test if sysfs interface not available */ +igt_skip_on (backlight_read (&old,"brightness" )); +igt_assert (backlight_read (&max,"max_brightness" ) >-1 ); + } + + igt_subtest("brightness") +test_brightness (max); + igt_subtest("bad-brightness") +test_bad_brightness (max); + igt_subtest("fade") +test_fade (max); + + igt_fixture { +/* Restore old brightness */ +backlight_write (old,"brightness" ); + } +}Signature · 1 line
1.8.3.2
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx