ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

PATCH New Gary Bisson 4 participants 16 messages May 22, 2015 – Oct 8, 2015

Subsystems (2)

Device tree bindings Arm i.MX and Layerscape

lore

Share & tools

lore

Gary Bisson

author

2015-05-22 17:14 UTC #0 lore raw

cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with a 18-bit parallel interface for both Nitrogen and Sabrelite.

A U-Boot script to configure the displays based on detection of the touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt

Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
ARM: dts: imx6qdl-sabrelite: add Okaya LCD display

 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 70 +++++++++++++++++++++++++++++++
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi  | 70 +++++++++++++++++++++++++++++++
 2 files changed, 140 insertions(+)

Signature · 1 line

2.1.4

Gary Bisson

author

2015-05-22 17:14 UTC #1 lore raw

PATCH 1/2 ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display

This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 70 +++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +70 -0

index 3af16df..7097593 100644
@@ -131,6 +131,39 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port {
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			okaya_800x480 {
+				native-mode;
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hsync-len = <48>;
+				hfront-porch = <40>;
+				vback-porch = <29>;
+				vsync-len = <3>;
+				vfront-porch = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -315,6 +348,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -382,6 +448,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.1.4

Gary Bisson

author

2015-05-22 17:14 UTC #2 lore raw

PATCH 2/2 ARM: dts: imx6qdl-sabrelite: add Okaya LCD display

In reply to Gary Bisson

This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 70 ++++++++++++++++++++++++++++++++
 1 file changed, 70 insertions(+)

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +70 -0

index e00c44f..d5a25dc 100644
@@ -130,6 +130,39 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port {
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		display-timings {
+			okaya_800x480 {
+				native-mode;
+				clock-frequency = <30000000>;
+				hactive = <800>;
+				vactive = <480>;
+				hback-porch = <40>;
+				hsync-len = <48>;
+				hfront-porch = <40>;
+				vback-porch = <29>;
+				vsync-len = <3>;
+				vfront-porch = <13>;
+				hsync-active = <0>;
+				vsync-active = <0>;
+				de-active = <1>;
+				pixelclk-active = <0>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -309,6 +342,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -377,6 +443,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.1.4

Shawn Guo

2015-05-27 03:06 UTC #3 lore raw

cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

In reply to Gary Bisson

Quoted 10 lines · Gary Bisson

This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with a 18-bit parallel interface for both Nitrogen and Sabrelite.
A U-Boot script to configure the displays based on detection of the touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
ARM: dts: imx6qdl-sabrelite: add Okaya LCD display

Philipp,

Are you okay with these two patches?

Shawn

Gary Bisson

author

2015-05-27 07:38 UTC #4 lore raw

cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

Philipp, Shawn, All,

Quoted 8 lines · Shawn Guo

Quoted 7 lines · Gary Bisson
This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with a 18-bit parallel interface for both Nitrogen and Sabrelite.
A U-Boot script to configure the displays based on detection of the touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt

Quoted 7 lines

Quoted 3 lines
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
Philipp,
Are you okay with these two patches?

I've actually just ran into Philipp's patch on drm_panel support for parallel-display driver.
https://patchwork.kernel.org/patch/6438311/

If the above patch is merged soon, maybe mine should be reworked to use the panel as well (and add the Okaya timings to the simple panel driver).

Let me know what would be the best.

Regards,
Gary

Philipp Zabel

2015-05-27 07:57 UTC #5 lore raw

cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

Hi Gary, Shawn,

Am Mittwoch, den 27.05.2015, 09:38 +0200 schrieb Gary Bisson:

Quoted 23 lines

Philipp, Shawn, All,
Quoted 8 lines · Shawn Guo
Quoted 7 lines · Gary Bisson
This series adds the Okaya 7" LCD display that is a WVGA (800x480) panel with a 18-bit parallel interface for both Nitrogen and Sabrelite.
A U-Boot script to configure the displays based on detection of the touch controller is available for reference here:
https://github.com/boundarydevices/u-boot-imx6/blob/staging/board/boundary/nitrogen6x/6x_bootscript-mainline.txt
Quoted 7 lines
Quoted 3 lines
Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD display
ARM: dts: imx6qdl-sabrelite: add Okaya LCD display
Philipp,
Are you okay with these two patches?
I've actually just ran into Philipp's patch on drm_panel support for parallel-display driver.
https://patchwork.kernel.org/patch/6438311/

Quoted 5 lines

If the above patch is merged soon, maybe mine should be reworked to use the panel as well (and add the Okaya timings to the simple panel driver).
Let me know what would be the best.

Yes, please add Okaya LCD support to the simple-panel driver instead. I'll send a pull request with the panel patch.

regards
Philipp

Gary Bisson

author

2015-05-29 07:56 UTC #6 lore raw

v2 cover ARM: dts: add Okaya LCD panel for Nitrogen and Sabrelite

In reply to Gary Bisson

This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen and Sabrelite.

It requires a patch from Philipp that adds panel support to the imx parallel display driver.
https://patchwork.kernel.org/patch/6438311/

Also requires the patch that adds the Okaya display support to the simple panel driver.
https://patchwork.kernel.org/patch/6503261/

Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi  | 76 ++++++++++++++++++++++++++++++-
 2 files changed, 150 insertions(+), 2 deletions(-)

Signature · 1 line

2.1.4

Gary Bisson

author

2015-05-29 07:56 UTC #7 lore raw

PATCH v2 1/2 ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel

This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/

Also add label to backlight_lcd and connect it to the panel.

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +75 -1

index 3af16df..622db9d 100644
@@ -113,7 +113,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;

@@ -131,6 +131,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port at 0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t_7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -315,6 +352,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -382,6 +452,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.1.4

Gary Bisson

author

2015-05-29 07:56 UTC #8 lore raw

PATCH v2 2/2 ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

In reply to Gary Bisson

This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/

Also add label to backlight_lcd and connect it to the panel.

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +75 -1

index e00c44f..87fd404 100644
@@ -112,7 +112,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;

@@ -130,6 +130,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port at 0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t_7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -309,6 +346,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -377,6 +447,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.1.4

Gary Bisson

author

2015-08-14 12:51 UTC #9 lore raw

v3 cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

In reply to Gary Bisson

This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen and Sabrelite.

This v3 updates the series as the compatible name has been changed from "okaya,rs800480t_7x0gp" to "okaya,rs800480t-7x0gp" when the drm patch has been merged into linux-next branch.
http://git.kernel.org/cgit/linux/kernel/git/next/linux-next.git/commit/?id=ec9000c

Also note that Philipp Zabel's patch that enables the parallel-display driver to work with a simple panel has been merged.
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=553a59f

Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi  | 76 ++++++++++++++++++++++++++++++-
 2 files changed, 150 insertions(+), 2 deletions(-)

Signature · 1 line

2.4.6

Gary Bisson

author

2015-08-14 12:51 UTC #10 lore raw

PATCH v3 1/2 ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel

This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/

Also add label to backlight_lcd and connect it to the panel.

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +75 -1

index 340bc8e..ad16dce 100644
@@ -124,7 +124,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;

@@ -142,6 +142,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port at 0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -354,6 +391,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -421,6 +491,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.4.6

Gary Bisson

author

2015-08-14 12:51 UTC #11 lore raw

PATCH v3 2/2 ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

In reply to Gary Bisson

This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/

Also add label to backlight_lcd and connect it to the panel.

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +75 -1

index ce4c731..6adbcdd 100644
@@ -123,7 +123,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;

@@ -141,6 +141,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port at 0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -348,6 +385,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -416,6 +486,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.4.6

Gary Bisson

author

2015-09-30 13:05 UTC #12 lore raw

v3 cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

In reply to Gary Bisson

This is just a resend of my v3 with Shawn's correct e-mail address. I've also made sure it applies (and builds) on latest linux-next 20150930.

This series adds the Okaya 7" LCD support as a simple panel for both Nitrogen and Sabrelite.

Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi  | 76 ++++++++++++++++++++++++++++++-
 2 files changed, 150 insertions(+), 2 deletions(-)

Signature · 1 line

2.5.3

Gary Bisson

author

2015-09-30 13:05 UTC #13 lore raw

PATCH RESEND v3 1/2 ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel

This patch adds support for the 7" LCD display available for Nitrogen6x:
http://boundarydevices.com/product/7-800x480-display/

Also add label to backlight_lcd and connect it to the panel.

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 76 ++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +75 -1

index 04278ba..7212f90 100644
@@ -124,7 +124,7 @@
 		mux-ext-port = <3>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;

@@ -142,6 +142,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port at 0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -354,6 +391,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -421,6 +491,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.5.3

Gary Bisson

author

2015-09-30 13:05 UTC #14 lore raw

PATCH RESEND v3 2/2 ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

In reply to Gary Bisson

This patch adds support for the 7" LCD display available for Sabrelite:
http://boundarydevices.com/product/7-800x480-display/

Also add label to backlight_lcd and connect it to the panel.

Signed-off-by Gary Bisson <[email protected]>

---
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 76 +++++++++++++++++++++++++++++++-
 1 file changed, 75 insertions(+), 1 deletion(-)

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +75 -1

index 2f85106..65cdeb3 100644
@@ -123,7 +123,7 @@
 		mux-ext-port = <4>;
 	};
 
-	backlight_lcd {
+	backlight_lcd: backlight_lcd {
 		compatible = "pwm-backlight";
 		pwms = <&pwm1 0 5000000>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;

@@ -141,6 +141,43 @@
 		status = "okay";
 	};
 
+	lcd_display: display at di0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_j15>;
+		status = "okay";
+
+		port at 0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port at 1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	lcd_panel {
+		compatible = "okaya,rs800480t-7x0gp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	panel {
 		compatible = "hannstar,hsd100pxn1";
 		backlight = <&backlight_lvds>;

@@ -348,6 +385,39 @@
 			>;
 		};
 
+		pinctrl_j15: j15grp {
+			fsl,pins = <
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
+				MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
+				MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
+				MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
+				MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
+				MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
+				MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
+			>;
+		};
+
 		pinctrl_pwm1: pwm1grp {
 			fsl,pins = <
 				MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1

@@ -416,6 +486,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &ldb {
 	status = "okay";

Signature · 1 line

2.5.3

Shawn Guo

Applied

2015-10-08 07:55 UTC #15 lore raw

v3 cover ARM: dts: add Okaya LCD display for Nitrogen and Sabrelite

In reply to Gary Bisson

Quoted 3 lines · Gary Bisson

Gary Bisson (2):
ARM: dts: imx6qdl-nitrogen6x: add Okaya LCD panel
ARM: dts: imx6qdl-sabrelite: add Okaya LCD panel

Applied both, thanks.