Skip to contentSkip to conversation

ARM: dts: Remove L3 compatible value for dm816x

PATCH New Tony Lindgren 1 participant 2 messages May 29, 2015 Device tree bindings

lore
Share & tools
lore

Tony Lindgren

author
#0 lore raw

PATCH 1/1 ARM: dts: Remove L3 compatible value for dm816x

The interconnects on dm816x are like on omap4, so we should use l3-noc instead of l3-smx. But as the related SoC specific l3_target_data is still missing from omap_l3_noc let's just remove the entry for now.

Cc Brian Hutchinson <[email protected]>
Reported-by Matthijs van Duin <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/boot/dts/dm816x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/dm816x.dtsi +1 -1
index 289806a..3c99cfa 100644
@@ -58,7 +58,7 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
+		compatible = "simple-bus";
 		reg = <0x44000000 0x10000>;
 		interrupts = <9 10>;
 		#address-cells = <1>;
Signature · 1 line
2.1.4
author
#1 lore raw

PATCH 1/1 ARM: dts: Remove L3 compatible value for dm816x

Quoted 17 lines · Tony Lindgren

The interconnects on dm816x are like on omap4, so we should use l3-noc instead of l3-smx. But as the related SoC specific l3_target_data is still missing from omap_l3_noc let's just remove the entry for now.

Cc Brian Hutchinson <[email protected]>
Reported-by Matthijs van Duin <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
---
 arch/arm/boot/dts/dm816x.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/dm816x.dtsi +0 -0
index 289806a..3c99cfa 100644

arch/arm/boot/dts/dm816x.dtsi line 64

Quoted 8 lines
arch/arm/boot/dts/dm816x.dtsi +1 -1
@@ -58,7 +58,7 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
+		compatible = "simple-bus";
 		reg = <0x44000000 0x10000>;
 		interrupts = <9 10>;
 		#address-cells = <1>;

We should remove reg and interrupts too, updated patch below.

Regards,

Tony

8< ---------------
From: Tony Lindgren <[email protected]>
Date: Mon, 16 Mar 2015 18:04:20 -0700
Subject: [PATCH] ARM: dts: Remove L3 compatible value for dm816x

The interconnects on dm816x are like on omap4, so we should use l3-noc instead of l3-smx. But as the related SoC specific l3_target_data is still missing from omap_l3_noc let's just remove the entry for now. And as we're updating the dts files to follow the interconnect layout, this module will not be at the top level.

Cc Brian Hutchinson <[email protected]>
Reported-by Matthijs van Duin <[email protected]>
Signed-off-by Tony Lindgren <[email protected]>
arch/arm/boot/dts/dm816x.dtsi +1 -3
@@ -58,9 +58,7 @@
 	 * the whole bus hierarchy.
 	 */
 	ocp {
-		compatible = "ti,omap3-l3-smx", "simple-bus";
-		reg = <0x44000000 0x10000>;
-		interrupts = <9 10>;
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;