Add Toby-Churchill SL50 board support
v2 cover Add Toby-Churchill SL50 board support
This patch series adds support for SL50 board based on TI AM335x SoC.
Changes since v1:
- Rebased with current mainline.
- Fix implicit declaration of function 'is_valid_ether_addr' (and the resulting link failure).
Best regards,
Enric Balletbo i Serra (1):
board: Add Toby-Churchill SL50 board support.
arch/arm/Kconfig | 6 + board/tcl/sl50/Kconfig | 34 ++++ board/tcl/sl50/MAINTAINERS | 6 + board/tcl/sl50/Makefile | 13 ++ board/tcl/sl50/board.c | 386 ++++++++++++++++++++++++++++++++++++++++++ board/tcl/sl50/board.h | 22 +++ board/tcl/sl50/mux.c | 161 ++++++++++++++++++ configs/am335x_sl50_defconfig | 7 + include/configs/am335x_sl50.h | 141 +++++++++++++++ 9 files changed, 776 insertions(+) create mode 100644 board/tcl/sl50/Kconfig create mode 100644 board/tcl/sl50/MAINTAINERS create mode 100644 board/tcl/sl50/Makefile create mode 100644 board/tcl/sl50/board.c create mode 100644 board/tcl/sl50/board.h create mode 100644 board/tcl/sl50/mux.c create mode 100644 configs/am335x_sl50_defconfig create mode 100644 include/configs/am335x_sl50.h
Signature · 1 line
2.1.0
PATCH v2 1/1 board: Add Toby-Churchill SL50 board support.
Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions.
--- arch/arm/Kconfig | 6 + board/tcl/sl50/Kconfig | 34 ++++ board/tcl/sl50/MAINTAINERS | 6 + board/tcl/sl50/Makefile | 13 ++ board/tcl/sl50/board.c | 386 ++++++++++++++++++++++++++++++++++++++++++ board/tcl/sl50/board.h | 22 +++ board/tcl/sl50/mux.c | 161 ++++++++++++++++++ configs/am335x_sl50_defconfig | 7 + include/configs/am335x_sl50.h | 141 +++++++++++++++ 9 files changed, 776 insertions(+) create mode 100644 board/tcl/sl50/Kconfig create mode 100644 board/tcl/sl50/MAINTAINERS create mode 100644 board/tcl/sl50/Makefile create mode 100644 board/tcl/sl50/board.c create mode 100644 board/tcl/sl50/board.h create mode 100644 board/tcl/sl50/mux.c create mode 100644 configs/am335x_sl50_defconfig create mode 100644 include/configs/am335x_sl50.h
arch/arm/Kconfig +6 -0
@@ -377,6 +377,11 @@ config TARGET_AM335X_EVM select DM_SERIAL select DM_GPIO +config TARGET_AM335X_SL50 + bool "Support am335x_sl50" + select CPU_V7 + select SUPPORT_SPL + config TARGET_AM43XX_EVM bool "Support am43xx_evm" select CPU_V7
@@ -946,6 +951,7 @@ source "board/st/stv0991/Kconfig" source "board/sunxi/Kconfig" source "board/syteco/zmx25/Kconfig" source "board/tbs/tbs2910/Kconfig" +source "board/tcl/sl50/Kconfig" source "board/ti/am335x/Kconfig" source "board/ti/am43xx/Kconfig" source "board/birdland/bav335x/Kconfig"
board/tcl/sl50/Kconfig new file +34 -0
@@ -0,0 +1,34 @@ +if TARGET_AM335X_SL50 + +config SYS_BOARD + default "sl50" + +config SYS_VENDOR + default "tcl" + +config SYS_SOC + default "am33xx" + +config SYS_CONFIG_NAME + default "am335x_sl50" + +config CONS_INDEX + int "UART used for console" + range 1 6 + default 1 + help + The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced + in documentation, etc) available to it. Depending on your specific + board you may want something other than UART0 as for example the IDK + uses UART3 so enter 4 here. + +config DM + default y + +config DM_GPIO + default y if DM + +config DM_SERIAL + default y if DM + +endif
board/tcl/sl50/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +SL50 BOARD +M: Enric Balletbo i Serra <[email protected]> +S: Maintained +F: board/tcl/sl50/ +F: include/configs/am335x_sl50.h +F: configs/am335x_sl50_defconfig
board/tcl/sl50/Makefile new file +13 -0
@@ -0,0 +1,13 @@ +# +# Makefile +# +# Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) +obj-y := mux.o +endif + +obj-y += board.o
board/tcl/sl50/board.c new file +386 -0
386 lines not on this page · raw message
board/tcl/sl50/board.h new file +22 -0
@@ -0,0 +1,22 @@ +/* +* board.h +* +* TCL SL50 boards information header +* +* Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/ +* +* SPDX-License-Identifier: GPL-2.0+ +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +void enable_uart0_pin_mux (void ); +void enable_uart1_pin_mux (void ); +void enable_uart2_pin_mux (void ); +void enable_uart3_pin_mux (void ); +void enable_uart4_pin_mux (void ); +void enable_uart5_pin_mux (void ); +void enable_i2c0_pin_mux (void ); +void enable_board_pin_mux (void ); +#endif
board/tcl/sl50/mux.c new file +161 -0
161 lines not on this page · raw message
configs/am335x_sl50_defconfig new file +7 -0
@@ -0,0 +1,7 @@ +CONFIG_SPL=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_ADDR=0x82000000 +CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT" +CONFIG_CONS_INDEX=1 +CONFIG_ARM=y +CONFIG_TARGET_AM335X_SL50=y
include/configs/am335x_sl50.h new file +141 -0
141 lines not on this page · raw message
Signature · 1 line
2.1.0
PATCH v2 1/1 board: Add Toby-Churchill SL50 board support.
Quoted 16 lines · Enric Balletbo i Serra
Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions.
Signed-off-by Enric Balletbo i Serra <[email protected]>---
board/tcl/sl50/board.c new file +0
-0
board/tcl/sl50/board.c line 6
Quoted 6 lines
board/tcl/sl50/board.c new file +6
-0@@ -0,0 +1,386 @@ +/* +* board.c +* +* Board functions for TCL SL50 board +* +* Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
This seems heavily based on ti/am335x/board.c, so you should keep the TI copyright header in addition to the TCL one. (Similar for mux.c)
Quoted 53 lines
board/tcl/sl50/board.c new file +52
-0+++ b/include/configs/am335x_sl50.h@@ -0,0 +1,141 @@ +/* +* am335x_sl50.h +* +* Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/ +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +* +* This program is distributed "as is" WITHOUT ANY WARRANTY of any +* kind, whether express or implied; without even the implied warranty +* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ + +#ifndef __CONFIG_AM335X_EVM_H +#define __CONFIG_AM335X_EVM_H + +#include <configs/ti_am335x_common.h> +#undef CONFIG_BOOTDELAY + +#ifndef CONFIG_SPL_BUILD +#ifndef CONFIG_FIT +# define CONFIG_FIT +#endif +# define CONFIG_TIMESTAMP +# define CONFIG_LZO +#endif + +#define CONFIG_SYS_BOOTM_LEN (16 << 20) + +/*#define CONFIG_MACH_TYPE 3589 Until the next sync */ +#define CONFIG_BOARD_LATE_INIT + +/* Clock Defines */ +#define V_OSCK 24000000/* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +/* Always 128 KiB env size */ +#define CONFIG_ENV_SIZE (128 << 10) + +/* Enhance our eMMC support / experience. */ +#define CONFIG_CMD_GPT +#define CONFIG_EFI_PARTITION + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + +#ifndef CONFIG_SPL_BUILD + +#include <config_distro_defaults.h> +
board/tcl/sl50/board.c line 61
Quoted 10 lines
board/tcl/sl50/board.c new file +10
-0+#define MEM_LAYOUT_ENV_SETTINGS \ + "scriptaddr=0x80000000\0" \ + "pxefile_addr_r=0x80100000\0" \ + "kernel_addr_r=0x82000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x88080000\0" \ + +#define BOOT_TARGET_DEVICES (func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1)
It's common for the distro boot commands to start check external MMC before internal. Assuming 0 is internal and 1 is external, it would be good to swap those two around.
Quoted 81 lines
board/tcl/sl50/board.c new file +79
-0+#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + MEM_LAYOUT_ENV_SETTINGS \ + BOOTENV + +#endif + +/* NS16550 Configuration */ +#define CONFIG_SYS_NS16550_COM1 0x44e09000/* Base EVM has UART0 */ +#define CONFIG_SYS_NS16550_COM2 0x48022000/* UART1 */ +#define CONFIG_SYS_NS16550_COM3 0x48024000/* UART2 */ +#define CONFIG_SYS_NS16550_COM4 0x481a6000/* UART3 */ +#define CONFIG_SYS_NS16550_COM5 0x481a8000/* UART4 */ +#define CONFIG_SYS_NS16550_COM6 0x481aa000/* UART5 */ +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_CMD_EEPROM +#define CONFIG_ENV_EEPROM_IS_ON_I2C +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50/* Main EEPROM */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_MULTI_EEPROMS + +/* PMIC support */ +#define CONFIG_POWER_TPS65217 +#define CONFIG_POWER_TPS65910 + +/* SPL */ +#define CONFIG_SPL_POWER_SUPPORT +#define CONFIG_SPL_YMODEM_SUPPORT + +/* Bootcount using the RTC block */ +#define CONFIG_BOOTCOUNT_LIMIT +#define CONFIG_BOOTCOUNT_AM33XX +#define CONFIG_SYS_BOOTCOUNT_BE + +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#ifndef CONFIG_SPL_USBETH_SUPPORT +/* To support eMMC booting */ +#define CONFIG_STORAGE_EMMC +#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1 +#endif + +#if defined(CONFIG_SPL_BUILD ) && defined(CONFIG_SPL_USBETH_SUPPORT ) +/* Remove other SPL modes. */ +#undef CONFIG_SPL_YMODEM_SUPPORT +#undef CONFIG_SPL_NAND_SUPPORT +#undef CONFIG_SPL_MMC_SUPPORT +#define CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_IS_IN_NAND +/* disable host part of MUSB in SPL */ +#undef CONFIG_MUSB_HOST +/* disable EFI partitions and partition UUID support */ +#undef CONFIG_PARTITION_UUIDS +#undef CONFIG_EFI_PARTITION +/* General network SPL */ +#define CONFIG_SPL_NET_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL" +#endif + +#if defined(CONFIG_EMMC_BOOT ) +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SYS_MMC_ENV_DEV 1 +#define CONFIG_SYS_MMC_ENV_PART 2 +#define CONFIG_ENV_OFFSET 0x0 +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#endif + +/* Network. */ +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_SMSC + +#endif /* ! __CONFIG_AM335X_SL50_H */
PATCH v2 1/1 board: Add Toby-Churchill SL50 board support.
In reply to Enric Balletbo i SerraQuoted 6 lines · Enric Balletbo i Serra
Add support for Lightwriter SL50 series board, a small, robust and portable Voice Output Communication Aids (VOCA) designed to meet the particular and changing needs of people with speech loss resulting from a wide range of acquired, progressive and congenital conditions.
Signed-off-by Enric Balletbo i Serra <[email protected]>
[snip]
Quoted 1 line
+++
b/board/tcl/sl50/mux.c
[snip]
Quoted 1 line
+++
b/include/configs/am335x_sl50.h
In addition to Sjoerd's comments, these two files don't have SPDX tags but instead the full verbage, please fix, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150602/adeea863/attachment.sig>