scsi: storvsc: Some miscellaneous cleanup
Subsystems (2)
v2 cover scsi: storvsc: Some miscellaneous cleanup
Cleanup version handling as well as base feature detection on storage version as opposed to host version.
In this version, I have addressed comments from Dan Carpenter.
K. Y. Srinivasan (1):
scsi: storvsc: Set the error code correctly in failure conditions
Keith Mange (6):
scsi: storvsc: Rather than look for sets of specific protocol
versions, make decisions based on ranges.
scsi: storvsc: Use a single value to track protocol versions
scsi: storvsc: Untangle the storage protocol negotiation from the
vmbus protocol negotiation.
scsi: storvsc: use correct defaults for values determined by protocol
negotiation
scsi: storvsc: use storage protocol version to determine storage
capabilities
scsi: storvsc: Allow write_same when host is windows 10
drivers/scsi/storvsc_drv.c | 206 ++++++++++++++++++++++++++++---------------- 1 files changed, 132 insertions(+), 74 deletions(-)
Signature · 1 line
1.7.4.1
PATCH v2 1/7 scsi: storvsc: Rather than look for sets of specific protocol versions, make decisions based on ranges.
From: Keith Mange <[email protected]>
Rather than look for sets of specific protocol versions,
make decisions based on ranges. This will be safer and require fewer changes going forward as we add more storage protocol versions.
--- drivers/scsi/storvsc_drv.c | 11 +++-------- 1 files changed, 3 insertions(+), 8 deletions(-)
drivers/scsi/storvsc_drv.c +3 -8
@@ -988,8 +988,7 @@ static int storvsc_channel_init(struct hv_device *device)* support multi-channel. */ max_chns = vstor_packet->storage_channel_properties.max_channel_cnt; -if ((vmbus_proto_version !=VERSION_WIN7 ) && - (vmbus_proto_version !=VERSION_WS2008 )) { +if (vmbus_proto_version >=VERSION_WIN8 ) {if (vstor_packet->storage_channel_properties.flags &STORAGE_CHANNEL_SUPPORTS_MULTI_CHANNEL ) process_sub_channels = true;
@@ -1758,9 +1757,7 @@ static int storvsc_probe(struct hv_device *device,* set state to properly communicate with the host. */ -switch (vmbus_proto_version) { -case VERSION_WS2008 : -case VERSION_WIN7 : +if (vmbus_proto_version <VERSION_WIN8 ) { sense_buffer_size =PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE ; vmscsi_size_delta =sizeof (struct vmscsi_win8_extension ); vmstor_current_major =VMSTOR_WIN7_MAJOR ;
@@ -1768,8 +1765,7 @@ static int storvsc_probe(struct hv_device *device, max_luns_per_target =STORVSC_IDE_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_IDE_MAX_TARGETS ; max_channels =STORVSC_IDE_MAX_CHANNELS ; -break ; -default : + }else { sense_buffer_size =POST_WIN7_STORVSC_SENSE_BUFFER_SIZE ; vmscsi_size_delta =0 ; vmstor_current_major =VMSTOR_WIN8_MAJOR ;
@@ -1783,7 +1779,6 @@ static int storvsc_probe(struct hv_device *device,* VCPUs in the guest. */ max_sub_channels = (num_cpus / storvsc_vcpus_per_sub_channel); -break ; } scsi_driver.can_queue = (max_outstanding_req_per_channel *
Signature · 1 line
1.7.4.1
PATCH v2 2/7 scsi: storvsc: Use a single value to track protocol versions
From: Keith Mange <[email protected]>
Use a single value to track protocol versions to simplify comparisons and to be consistent with vmbus version tracking.
--- drivers/scsi/storvsc_drv.c | 35 +++++++++-------------------------- 1 files changed, 9 insertions(+), 26 deletions(-)
drivers/scsi/storvsc_drv.c +9 -26
@@ -58,12 +58,11 @@* Win8: 5.1 */ +#define VMSTOR_PROTO_VERSION (MAJOR_ ,MINOR_ ) ((((MAJOR_) & 0xff) << 8) | \ + (((MINOR_) & 0xff))) -#define VMSTOR_WIN7_MAJOR 4 -#define VMSTOR_WIN7_MINOR 2 - -#define VMSTOR_WIN8_MAJOR 5 -#define VMSTOR_WIN8_MINOR 1 +#define VMSTOR_PROTO_VERSION_WIN7 VMSTOR_PROTO_VERSION(4, 2) +#define VMSTOR_PROTO_VERSION_WIN8 VMSTOR_PROTO_VERSION(5, 1)/* Packet structure describing virtual storage requests. */
@@ -161,8 +160,7 @@ static int sense_buffer_size;*/ static int vmscsi_size_delta; -static int vmstor_current_major; -static int vmstor_current_minor; +static int vmstor_proto_version;struct vmscsi_win8_extension {/*
@@ -481,18 +479,6 @@ done:kfree (wrk); } -/* -* Major/minor macros. Minor version is in LSB, meaning that earlier flat -* version numbers will be interpreted as "0.x" (i.e., 1 becomes 0.1). -*/ - -static inline u16 storvsc_get_version (u8 major,u8 minor) -{ -u16 version; - - version = ((major <<8 ) | minor); -return version; -}/* * We can get incoming messages from the host that are not in response to
@@ -930,8 +916,7 @@ static int storvsc_channel_init(struct hv_device *device) vstor_packet->operation =VSTOR_OPERATION_QUERY_PROTOCOL_VERSION ; vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - vstor_packet->version.major_minor = -storvsc_get_version (vmstor_current_major, vmstor_current_minor); + vstor_packet->version.major_minor = vmstor_proto_version;/* * The revision number is only used in Windows; set it to 0.
@@ -1562,7 +1547,7 @@ static int storvsc_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *scmnd)u32 payload_sz;u32 length; -if (vmstor_current_major <=VMSTOR_WIN8_MAJOR ) { +if (vmstor_proto_version <=VMSTOR_PROTO_VERSION_WIN8 ) {/* * On legacy hosts filter unimplemented commands. * Future hosts are expected to correctly handle
@@ -1760,16 +1745,14 @@ static int storvsc_probe(struct hv_device *device,if (vmbus_proto_version <VERSION_WIN8 ) { sense_buffer_size =PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE ; vmscsi_size_delta =sizeof (struct vmscsi_win8_extension ); - vmstor_current_major =VMSTOR_WIN7_MAJOR ; - vmstor_current_minor =VMSTOR_WIN7_MINOR ; + vmstor_proto_version =VMSTOR_PROTO_VERSION_WIN7 ; max_luns_per_target =STORVSC_IDE_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_IDE_MAX_TARGETS ; max_channels =STORVSC_IDE_MAX_CHANNELS ; }else { sense_buffer_size =POST_WIN7_STORVSC_SENSE_BUFFER_SIZE ; vmscsi_size_delta =0 ; - vmstor_current_major =VMSTOR_WIN8_MAJOR ; - vmstor_current_minor =VMSTOR_WIN8_MINOR ; + vmstor_proto_version =VMSTOR_PROTO_VERSION_WIN8 ; max_luns_per_target =STORVSC_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_MAX_TARGETS ; max_channels =STORVSC_MAX_CHANNELS ;
Signature · 1 line
1.7.4.1
PATCH v2 3/7 scsi: storvsc: Untangle the storage protocol negotiation from the vmbus protocol negotiation.
In reply to K. Y. SrinivasanFrom: Keith Mange <[email protected]>
Currently we are making decisions based on vmbus protocol versions that have been negotiated; use storage potocol versions instead.
--- drivers/scsi/storvsc_drv.c | 109 +++++++++++++++++++++++++++++++++++--------- 1 files changed, 87 insertions(+), 22 deletions(-)
drivers/scsi/storvsc_drv.c +87 -22
@@ -56,14 +56,18 @@* V1 RC > 2008/1/31: 2.0 * Win7: 4.2 * Win8: 5.1 +* Win8.1: 6.0 +* Win10: 6.2 */ #define VMSTOR_PROTO_VERSION (MAJOR_ ,MINOR_ ) ((((MAJOR_) & 0xff) << 8) | \ (((MINOR_) & 0xff))) +#define VMSTOR_PROTO_VERSION_WIN6 VMSTOR_PROTO_VERSION(2, 0)#define VMSTOR_PROTO_VERSION_WIN7 VMSTOR_PROTO_VERSION(4, 2)#define VMSTOR_PROTO_VERSION_WIN8 VMSTOR_PROTO_VERSION(5, 1) - +#define VMSTOR_PROTO_VERSION_WIN8_1 VMSTOR_PROTO_VERSION(6, 0) +#define VMSTOR_PROTO_VERSION_WIN10 VMSTOR_PROTO_VERSION(6, 2)/* Packet structure describing virtual storage requests. */ enum vstor_packet_operation {
@@ -205,6 +209,46 @@ struct vmscsi_request {/* +* The list of storage protocols in order of preference. +*/ +struct vmstor_protocol { +int protocol_version; +int sense_buffer_size; +int vmscsi_size_delta; +}; + +#define VMSTOR_NUM_PROTOCOLS 5 + +const struct vmstor_protocol vmstor_protocols[VMSTOR_NUM_PROTOCOLS ] = { + { +VMSTOR_PROTO_VERSION_WIN10 , +POST_WIN7_STORVSC_SENSE_BUFFER_SIZE , +0 + }, + { +VMSTOR_PROTO_VERSION_WIN8_1 , +POST_WIN7_STORVSC_SENSE_BUFFER_SIZE , +0 + }, + { +VMSTOR_PROTO_VERSION_WIN8 , +POST_WIN7_STORVSC_SENSE_BUFFER_SIZE , +0 + }, + { +VMSTOR_PROTO_VERSION_WIN7 , +PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE , +sizeof (struct vmscsi_win8_extension ), + }, + { +VMSTOR_PROTO_VERSION_WIN6 , +PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE , +sizeof (struct vmscsi_win8_extension ), + } +}; + + +/* * This structure is sent during the intialization phase to get the different * properties of the channel. */
@@ -871,7 +915,7 @@ static int storvsc_channel_init(struct hv_device *device)struct storvsc_device *stor_device;struct storvsc_cmd_request *request;struct vstor_packet *vstor_packet; -int ret, t; +int ret, t, i;int max_chns;bool process_sub_channels = false;
@@ -911,36 +955,59 @@ static int storvsc_channel_init(struct hv_device *device) goto cleanup; -/* reuse the packet for version range supported */ -memset (vstor_packet,0 ,sizeof (struct vstor_packet )); - vstor_packet->operation =VSTOR_OPERATION_QUERY_PROTOCOL_VERSION ; - vstor_packet->flags =REQUEST_COMPLETION_FLAG ; +for (i =0 ; i <VMSTOR_NUM_PROTOCOLS ; i++) { +/* reuse the packet for version range supported */ +memset (vstor_packet,0 ,sizeof (struct vstor_packet )); + vstor_packet->operation = +VSTOR_OPERATION_QUERY_PROTOCOL_VERSION ; + vstor_packet->flags =REQUEST_COMPLETION_FLAG ; - vstor_packet->version.major_minor = vmstor_proto_version; + vstor_packet->version.major_minor = + vmstor_protocols[i].protocol_version; -/* -* The revision number is only used in Windows; set it to 0. -*/ - vstor_packet->version.revision =0 ; +/* +* The revision number is only used in Windows; set it to 0. +*/ + vstor_packet->version.revision =0 ; - ret =vmbus_sendpacket (device->channel, vstor_packet, + ret =vmbus_sendpacket (device->channel, vstor_packet, (sizeof (struct vstor_packet ) - vmscsi_size_delta), (unsigned long )request,VM_PKT_DATA_INBAND ,VMBUS_DATA_PACKET_FLAG_COMPLETION_REQUESTED ); -if (ret !=0 ) - goto cleanup; +if (ret !=0 ) + goto cleanup; - t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); -if (t ==0 ) { - ret = -ETIMEDOUT ; - goto cleanup; + t =wait_for_completion_timeout (&request->wait_event,5 *HZ ); +if (t ==0 ) { + ret = -ETIMEDOUT ; + goto cleanup; + } + +if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO ) { + ret = -EINVAL ; + goto cleanup; + } + +if (vstor_packet->status ==0 ) { + vmstor_proto_version = + vmstor_protocols[i].protocol_version; + + sense_buffer_size = + vmstor_protocols[i].sense_buffer_size; + + vmscsi_size_delta = + vmstor_protocols[i].vmscsi_size_delta; + +break ; + } } -if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) +if (vstor_packet->status !=0 ) { + ret = -EINVAL ; goto cleanup; + }memset (vstor_packet,0 ,sizeof (struct vstor_packet ));
@@ -1745,14 +1812,12 @@ static int storvsc_probe(struct hv_device *device,if (vmbus_proto_version <VERSION_WIN8 ) { sense_buffer_size =PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE ; vmscsi_size_delta =sizeof (struct vmscsi_win8_extension ); - vmstor_proto_version =VMSTOR_PROTO_VERSION_WIN7 ; max_luns_per_target =STORVSC_IDE_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_IDE_MAX_TARGETS ; max_channels =STORVSC_IDE_MAX_CHANNELS ; }else { sense_buffer_size =POST_WIN7_STORVSC_SENSE_BUFFER_SIZE ; vmscsi_size_delta =0 ; - vmstor_proto_version =VMSTOR_PROTO_VERSION_WIN8 ; max_luns_per_target =STORVSC_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_MAX_TARGETS ; max_channels =STORVSC_MAX_CHANNELS ;
Signature · 1 line
1.7.4.1
PATCH v2 4/7 scsi: storvsc: use correct defaults for values determined by protocol negotiation
In reply to K. Y. SrinivasanFrom: Keith Mange <[email protected]>
Use correct defaults for values determined by protocol negotiation, instead of resetting them with every scsi controller.
--- drivers/scsi/storvsc_drv.c | 33 +++++++++++++++++++-------------- 1 files changed, 19 insertions(+), 14 deletions(-)
drivers/scsi/storvsc_drv.c +19 -14
@@ -151,19 +151,17 @@ struct hv_fc_wwn_packet {/* * Sense buffer size changed in win8; have a run-time -* variable to track the size we should use. +* variable to track the size we should use. This value will +* likely change during protocol negotiation but it is valid +* to start by assuming pre-Win8. */ -static int sense_buffer_size; +static int sense_buffer_size =PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE ;/* -* The size of the vmscsi_request has changed in win8. The -* additional size is because of new elements added to the -* structure. These elements are valid only when we are talking -* to a win8 host. -* Track the correction to size we need to apply. -*/ - -static int vmscsi_size_delta; +* The storage protocol version is determined during the +* initial exchange with the host. It will indicate which +* storage functionality is available in the host. +*/ static int vmstor_proto_version;struct vmscsi_win8_extension {
@@ -209,6 +207,17 @@ struct vmscsi_request {/* +* The size of the vmscsi_request has changed in win8. The +* additional size is because of new elements added to the +* structure. These elements are valid only when we are talking +* to a win8 host. +* Track the correction to size we need to apply. This value +* will likely change during protocol negotiation but it is +* valid to start by assuming pre-Win8. +*/ +static int vmscsi_size_delta =sizeof (struct vmscsi_win8_extension ); + +/* * The list of storage protocols in order of preference. */ struct vmstor_protocol {
@@ -1810,14 +1819,10 @@ static int storvsc_probe(struct hv_device *device,*/ if (vmbus_proto_version <VERSION_WIN8 ) { - sense_buffer_size =PRE_WIN8_STORVSC_SENSE_BUFFER_SIZE ; - vmscsi_size_delta =sizeof (struct vmscsi_win8_extension ); max_luns_per_target =STORVSC_IDE_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_IDE_MAX_TARGETS ; max_channels =STORVSC_IDE_MAX_CHANNELS ; }else { - sense_buffer_size =POST_WIN7_STORVSC_SENSE_BUFFER_SIZE ; - vmscsi_size_delta =0 ; max_luns_per_target =STORVSC_MAX_LUNS_PER_TARGET ; max_targets =STORVSC_MAX_TARGETS ; max_channels =STORVSC_MAX_CHANNELS ;
Signature · 1 line
1.7.4.1
PATCH v2 5/7 scsi: storvsc: use storage protocol version to determine storage capabilities
In reply to K. Y. SrinivasanFrom: Keith Mange <[email protected]>
Use storage protocol version instead of vmbus protocol version when determining storage capabilities.
--- drivers/scsi/storvsc_drv.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-)
drivers/scsi/storvsc_drv.c +4 -4
@@ -1049,7 +1049,7 @@ static int storvsc_channel_init(struct hv_device *device)* support multi-channel. */ max_chns = vstor_packet->storage_channel_properties.max_channel_cnt; -if (vmbus_proto_version >=VERSION_WIN8 ) { +if (vmstor_proto_version >=VMSTOR_PROTO_VERSION_WIN8 ) {if (vstor_packet->storage_channel_properties.flags &STORAGE_CHANNEL_SUPPORTS_MULTI_CHANNEL ) process_sub_channels = true;
@@ -1491,9 +1491,9 @@ static int storvsc_device_configure(struct scsi_device *sdevice)* if the device is a MSFT virtual device. */ if (!strncmp (sdevice->vendor,"Msft" ,4 )) { -switch (vmbus_proto_version) { -case VERSION_WIN8 : -case VERSION_WIN8_1 : +switch (vmstor_proto_version) { +case VMSTOR_PROTO_VERSION_WIN8 : +case VMSTOR_PROTO_VERSION_WIN8_1 : sdevice->scsi_level =SCSI_SPC_3 ;break ; }
Signature · 1 line
1.7.4.1
PATCH v2 6/7 scsi: storvsc: Allow write_same when host is windows 10
In reply to K. Y. SrinivasanFrom: Keith Mange <[email protected]>
Allow WRITE_SAME for Windows10 and above hosts.
--- drivers/scsi/storvsc_drv.c | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-)
drivers/scsi/storvsc_drv.c +5 -1
@@ -1488,7 +1488,8 @@ static int storvsc_device_configure(struct scsi_device *sdevice)/* * If the host is WIN8 or WIN8 R2, claim conformance to SPC-3 -* if the device is a MSFT virtual device. +* if the device is a MSFT virtual device. If the host is +* WIN10 or newer, allow write_same. */ if (!strncmp (sdevice->vendor,"Msft" ,4 )) {switch (vmstor_proto_version) {
@@ -1497,6 +1498,9 @@ static int storvsc_device_configure(struct scsi_device *sdevice) sdevice->scsi_level =SCSI_SPC_3 ;break ; } + +if (vmstor_proto_version >=VMSTOR_PROTO_VERSION_WIN10 ) + sdevice->no_write_same =0 ; }return 0 ;
Signature · 1 line
1.7.4.1
PATCH v2 7/7 scsi: storvsc: Set the error code correctly in failure conditions
In reply to K. Y. SrinivasanIn the function storvsc_channel_init(), error code was not getting set correctly in some of the failure cases. Fix this issue.
--- drivers/scsi/storvsc_drv.c | 12 +++++++++--- 1 files changed, 9 insertions(+), 3 deletions(-)
drivers/scsi/storvsc_drv.c +9 -3
@@ -960,8 +960,10 @@ static int storvsc_channel_init(struct hv_device *device) }if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) + vstor_packet->status !=0 ) { + ret = -EINVAL ; goto cleanup; + }for (i =0 ; i <VMSTOR_NUM_PROTOCOLS ; i++) {
@@ -1040,8 +1042,10 @@ static int storvsc_channel_init(struct hv_device *device) }if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) + vstor_packet->status !=0 ) { + ret = -EINVAL ; goto cleanup; + }/* * Check to see if multi-channel support is there.
@@ -1078,8 +1082,10 @@ static int storvsc_channel_init(struct hv_device *device) }if (vstor_packet->operation !=VSTOR_OPERATION_COMPLETE_IO || - vstor_packet->status !=0 ) + vstor_packet->status !=0 ) { + ret = -EINVAL ; goto cleanup; + }if (process_sub_channels)handle_multichannel_storage (device, max_chns);
Signature · 1 line
1.7.4.1