Add VT-d Posted-Interrupts support - IOMMU part
v10 cover Add VT-d Posted-Interrupts support - IOMMU part
VT-d Posted-Interrupts is an enhancement to CPU side Posted-Interrupt. With VT-d Posted-Interrupts enabled, external interrupts from direct-assigned devices can be delivered to guests without VMM intervention when guest is running in non-root mode.
You can find the VT-d Posted-Interrtups Spec. in the following URL:
http://www.intel.com/content/www/us/en/intelligent-systems/intel-technology/vt-directed-io-spec.html
This series was part of http://thread.gmane.org/gmane.linux.kernel.iommu/7708. To make things clear, send out IOMMU part here.
This patch-set is based on the lastest x86/apic branch of tip tree.
Divide the whole series which contain multiple components into three parts:
- Prerequisite changes to irq subsystem (already merged in tip tree x86/apic branch)
- IOMMU part (in this series)
- KVM and VFIO parts (will send out this part once the first two parts are accepted)
v9->v10:
* Fix the build error found by the 0-day test infrastructure.
- Define 'enum irq_remap_cap' outside '#ifdef CONFIG_IRQ_REMAP', so we can use it for the paramenter of the dummy function irq_remapping_cap() when CONFIG_IRQ_REMAP is not defined.
- Make function irq_remapping_cap() inline when CONFIG_IRQ_REMAP is not defined.
v8->v9:
* Remove member "irte_pi_entry" in struct intel_ir_data.
* Some changes to the comments.
v7->v8:
* Save the irq mode (posted or remapped) of an IRTE in struct irq_2_iommu.
* Use this new mode to decide whether update the hardware when modifying irte in intel_ir_set_affinity().
v6->v7:
* Add an static inline helper function set_irq_posting_cap() to set the PI capability.
* Add some comments for the new member "ir_data->irte_pi_entry".
v5->v6:
* Extend 'struct irte' for VT-d Posted-Interrupts, combine remapped and posted mode into one irte structure.
v4->v5:
* Abstract modify_irte() to accept two format of irte.
v3->v4:
* Change capability to a int variant flags instead of a function call.
* Add hotplug case for VT-d PI.
Feng Wu (8):
iommu: Add new member capability to struct irq_remap_ops iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip iommu, x86: Save the mode (posted or remapped) of an IRTE iommu, x86: Avoid migrating VT-d posted interrupts iommu, x86: Add cap_pi_support() to detect VT-d PI capability iommu, x86: Setup Posted-Interrupts capability for Intel iommu iommu, x86: Provide irq_remapping_cap() interface iommu, x86: Properly handle posted interrupts for IOMMU hotplug
Thomas Gleixner (2):
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: dmar: Provide helper to copy shared irte fields
arch/x86/include/asm/irq_remapping.h | 11 +++++ drivers/iommu/intel_irq_remapping.c | 85 +++++++++++++++++++++++++++++++++++- drivers/iommu/irq_remapping.c | 11 +++++ drivers/iommu/irq_remapping.h | 6 +++ include/linux/dmar.h | 82 +++++++++++++++++++++++++++------- include/linux/intel-iommu.h | 1 + 6 files changed, 180 insertions(+), 16 deletions(-)
Signature · 1 line
2.1.0
PATCH v10 1/10 iommu: Add new member capability to struct irq_remap_ops
Add a new member 'capability' to struct irq_remap_ops for storing information about available capabilities such as VT-d Posted-Interrupts.
--- arch/x86/include/asm/irq_remapping.h | 4 ++++ drivers/iommu/irq_remapping.h | 3 +++ 2 files changed, 7 insertions(+)
arch/x86/include/asm/irq_remapping.h +4 -0
@@ -29,6 +29,10 @@struct msi_msg ;struct irq_alloc_info ; +enum irq_remap_cap { +IRQ_POSTING_CAP =0 , +}; +#ifdef CONFIG_IRQ_REMAP extern void set_irq_remapping_broken (void );
drivers/iommu/irq_remapping.h +3 -0
@@ -35,6 +35,9 @@ extern int no_x2apic_optout;extern int irq_remapping_enabled;struct irq_remap_ops { +/* The supported capabilities */ +int capability; +/* Initializes hardware and makes it ready for remapping interrupts */ int (*prepare)(void );
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu: Add new member capability to struct irq_remap_ops
iommu: Add new member capability to struct irq_remap_ops
Commit-ID: 6f281923949a4944a7d5625e4f900ec02fefee59 Gitweb: http://git.kernel.org/tip/6f281923949a4944a7d5625e4f900ec02fefee59 Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:28 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:51 +0200
iommu: Add new member capability to struct irq_remap_ops
Add a new member 'capability' to struct irq_remap_ops for storing information about available capabilities such as VT-d Posted-Interrupts.
--- arch/x86/include/asm/irq_remapping.h | 4 ++++ drivers/iommu/irq_remapping.h | 3 +++ 2 files changed, 7 insertions(+)
arch/x86/include/asm/irq_remapping.h +4 -0
@@ -29,6 +29,10 @@struct msi_msg ;struct irq_alloc_info ; +enum irq_remap_cap { +IRQ_POSTING_CAP =0 , +}; +#ifdef CONFIG_IRQ_REMAP extern void set_irq_remapping_broken (void );
drivers/iommu/irq_remapping.h +3 -0
@@ -35,6 +35,9 @@ extern int no_x2apic_optout;extern int irq_remapping_enabled;struct irq_remap_ops { +/* The supported capabilities */ +int capability; +/* Initializes hardware and makes it ready for remapping interrupts */ int (*prepare)(void );
PATCH v10 2/10 iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
In reply to Feng WuFrom: Thomas Gleixner <[email protected]>
The IRTE (Interrupt Remapping Table Entry) is either an entry for remapped or for posted interrupts. The hardware distiguishes between remapped and posted entries by bit 15 in the low 64 bit of the IRTE. If cleared the entry is remapped, if set it's posted.
The entries have common fields and dependent on the posted bit fields with different meanings.
Extend struct irte to handle the differences between remap and posted mode by having three structs in the unions:
- Shared
- Remapped
- Posted
--- include/linux/dmar.h | 70 +++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 55 insertions(+), 15 deletions(-)
include/linux/dmar.h +55 -15
@@ -185,33 +185,73 @@ static inline int dmar_device_remove(void *handle)struct irte {union { +/* Shared between remapped and posted mode*/ struct { -__u64 present :1 , - fpd :1 , - dst_mode :1 , - redir_hint :1 , - trigger_mode :1 , - dlvry_mode :3 , - avail :4 , - __reserved_1 :4 , - vector :8 , - __reserved_2 :8 , - dest_id :32 ; +__u64 present :1 ,/* 0 */ + fpd :1 ,/* 1 */ + __res0 :6 ,/* 2 - 6 */ + avail :4 ,/* 8 - 11 */ + __res1 :3 ,/* 12 - 14 */ + pst :1 ,/* 15 */ + vector :8 ,/* 16 - 23 */ + __res2 :40 ;/* 24 - 63 */ + }; + +/* Remapped mode */ +struct { +__u64 r_present :1 ,/* 0 */ + r_fpd :1 ,/* 1 */ + dst_mode :1 ,/* 2 */ + redir_hint :1 ,/* 3 */ + trigger_mode :1 ,/* 4 */ + dlvry_mode :3 ,/* 5 - 7 */ + r_avail :4 ,/* 8 - 11 */ + r_res0 :4 ,/* 12 - 15 */ + r_vector :8 ,/* 16 - 23 */ + r_res1 :8 ,/* 24 - 31 */ + dest_id :32 ;/* 32 - 63 */ + }; + +/* Posted mode */ +struct { +__u64 p_present :1 ,/* 0 */ + p_fpd :1 ,/* 1 */ + p_res0 :6 ,/* 2 - 7 */ + p_avail :4 ,/* 8 - 11 */ + p_res1 :2 ,/* 12 - 13 */ + p_urgent :1 ,/* 14 */ + p_pst :1 ,/* 15 */ + p_vector :8 ,/* 16 - 23 */ + p_res2 :14 ,/* 24 - 37 */ + pda_l :26 ;/* 38 - 63 */ };__u64 low; };union { +/* Shared between remapped and posted mode*/ struct { -__u64 sid :16 , - sq :2 , - svt :2 , - __reserved_3 :44 ; +__u64 sid :16 ,/* 64 - 79 */ + sq :2 ,/* 80 - 81 */ + svt :2 ,/* 82 - 83 */ + __res3 :44 ;/* 84 - 127 */ + }; + +/* Posted mode*/ +struct { +__u64 p_sid :16 ,/* 64 - 79 */ + p_sq :2 ,/* 80 - 81 */ + p_svt :2 ,/* 82 - 83 */ + p_res3 :12 ,/* 84 - 95 */ + pda_h :32 ;/* 96 - 127 */ };__u64 high; }; }; +#define PDA_LOW_BIT 26 +#define PDA_HIGH_BIT 32 +enum {IRQ_REMAP_XAPIC_MODE ,IRQ_REMAP_X2APIC_MODE ,
Signature · 1 line
2.1.0
tip-bot for Thomas Gleixner
merge bot[tip:x86/apic] iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
Commit-ID: 3bf17472226b0041b0c61363bd57a5cadbe620c4 Gitweb: http://git.kernel.org/tip/3bf17472226b0041b0c61363bd57a5cadbe620c4 Author: Thomas Gleixner <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:29 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:51 +0200
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
The IRTE (Interrupt Remapping Table Entry) is either an entry for remapped or for posted interrupts. The hardware distiguishes between remapped and posted entries by bit 15 in the low 64 bit of the IRTE. If cleared the entry is remapped, if set it's posted.
The entries have common fields and dependent on the posted bit fields with different meanings.
Extend struct irte to handle the differences between remap and posted mode by having three structs in the unions:
- Shared
- Remapped
- Posted
--- include/linux/dmar.h | 70 +++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 55 insertions(+), 15 deletions(-)
include/linux/dmar.h +55 -15
@@ -185,33 +185,73 @@ static inline int dmar_device_remove(void *handle)struct irte {union { +/* Shared between remapped and posted mode*/ struct { -__u64 present :1 , - fpd :1 , - dst_mode :1 , - redir_hint :1 , - trigger_mode :1 , - dlvry_mode :3 , - avail :4 , - __reserved_1 :4 , - vector :8 , - __reserved_2 :8 , - dest_id :32 ; +__u64 present :1 ,/* 0 */ + fpd :1 ,/* 1 */ + __res0 :6 ,/* 2 - 6 */ + avail :4 ,/* 8 - 11 */ + __res1 :3 ,/* 12 - 14 */ + pst :1 ,/* 15 */ + vector :8 ,/* 16 - 23 */ + __res2 :40 ;/* 24 - 63 */ + }; + +/* Remapped mode */ +struct { +__u64 r_present :1 ,/* 0 */ + r_fpd :1 ,/* 1 */ + dst_mode :1 ,/* 2 */ + redir_hint :1 ,/* 3 */ + trigger_mode :1 ,/* 4 */ + dlvry_mode :3 ,/* 5 - 7 */ + r_avail :4 ,/* 8 - 11 */ + r_res0 :4 ,/* 12 - 15 */ + r_vector :8 ,/* 16 - 23 */ + r_res1 :8 ,/* 24 - 31 */ + dest_id :32 ;/* 32 - 63 */ + }; + +/* Posted mode */ +struct { +__u64 p_present :1 ,/* 0 */ + p_fpd :1 ,/* 1 */ + p_res0 :6 ,/* 2 - 7 */ + p_avail :4 ,/* 8 - 11 */ + p_res1 :2 ,/* 12 - 13 */ + p_urgent :1 ,/* 14 */ + p_pst :1 ,/* 15 */ + p_vector :8 ,/* 16 - 23 */ + p_res2 :14 ,/* 24 - 37 */ + pda_l :26 ;/* 38 - 63 */ };__u64 low; };union { +/* Shared between remapped and posted mode*/ struct { -__u64 sid :16 , - sq :2 , - svt :2 , - __reserved_3 :44 ; +__u64 sid :16 ,/* 64 - 79 */ + sq :2 ,/* 80 - 81 */ + svt :2 ,/* 82 - 83 */ + __res3 :44 ;/* 84 - 127 */ + }; + +/* Posted mode*/ +struct { +__u64 p_sid :16 ,/* 64 - 79 */ + p_sq :2 ,/* 80 - 81 */ + p_svt :2 ,/* 82 - 83 */ + p_res3 :12 ,/* 84 - 95 */ + pda_h :32 ;/* 96 - 127 */ };__u64 high; }; }; +#define PDA_LOW_BIT 26 +#define PDA_HIGH_BIT 32 +enum {IRQ_REMAP_XAPIC_MODE ,IRQ_REMAP_X2APIC_MODE ,
PATCH v10 3/10 iommu: dmar: Provide helper to copy shared irte fields
In reply to Feng WuFrom: Thomas Gleixner <[email protected]>
Instead of open coding, provide a helper function to copy the shared irte fields.
--- include/linux/dmar.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/linux/dmar.h +12 -0
@@ -249,6 +249,18 @@ struct irte { }; }; +static inline void dmar_copy_shared_irte (struct irte *dst,struct irte *src) +{ + dst->present = src->present; + dst->fpd = src->fpd; + dst->avail = src->avail; + dst->pst = src->pst; + dst->vector = src->vector; + dst->sid = src->sid; + dst->sq = src->sq; + dst->svt = src->svt; +} +#define PDA_LOW_BIT 26#define PDA_HIGH_BIT 32
Signature · 1 line
2.1.0
tip-bot for Thomas Gleixner
merge bot[tip:x86/apic] iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Provide helper to copy shared irte fields
Commit-ID: bf56027ff4d9e75bf668ae990fe6204d00a23002 Gitweb: http://git.kernel.org/tip/bf56027ff4d9e75bf668ae990fe6204d00a23002 Author: Thomas Gleixner <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:30 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu: dmar: Provide helper to copy shared irte fields
Instead of open coding, provide a helper function to copy the shared irte fields.
--- include/linux/dmar.h | 12 ++++++++++++ 1 file changed, 12 insertions(+)
include/linux/dmar.h +12 -0
@@ -249,6 +249,18 @@ struct irte { }; }; +static inline void dmar_copy_shared_irte (struct irte *dst,struct irte *src) +{ + dst->present = src->present; + dst->fpd = src->fpd; + dst->avail = src->avail; + dst->pst = src->pst; + dst->vector = src->vector; + dst->sid = src->sid; + dst->sq = src->sq; + dst->svt = src->svt; +} +#define PDA_LOW_BIT 26#define PDA_HIGH_BIT 32
PATCH v10 4/10 iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
In reply to Feng WuInterrupt chip callback to set the VCPU affinity for posted interrupts.
[ tglx: Use the helper function to copy from the remap irte instead of
open coding it. Massage the comment as well ]
--- arch/x86/include/asm/irq_remapping.h | 5 +++++ drivers/iommu/intel_irq_remapping.c | 37 ++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+)
arch/x86/include/asm/irq_remapping.h +5 -0
@@ -57,6 +57,11 @@ static inline struct irq_domain *arch_get_ir_parent_domain(void) return x86_vector_domain; } +struct vcpu_data { +u64 pi_desc_addr;/* Physical address of PI Descriptor */ +u32 vector;/* Guest vector of the interrupt */ +}; +#else /* CONFIG_IRQ_REMAP */ static inline void set_irq_remapping_broken (void ) { }
drivers/iommu/intel_irq_remapping.c +37 -0
@@ -1013,10 +1013,47 @@ static void intel_ir_compose_msi_msg(struct irq_data *irq_data, *msg = ir_data->msi_entry; } +static int intel_ir_set_vcpu_affinity (struct irq_data *data,void *info) +{ +struct intel_ir_data *ir_data = data->chip_data; +struct vcpu_data *vcpu_pi_info = info; + +/* stop posting interrupts, back to remapping mode */ +if (!vcpu_pi_info) { +modify_irte (&ir_data->irq_2_iommu, &ir_data->irte_entry); + }else { +struct irte irte_pi; + +/* +* We are not caching the posted interrupt entry. We +* copy the data from the remapped entry and modify +* the fields which are relevant for posted mode. The +* cached remapped entry is used for switching back to +* remapped mode. +*/ +memset (&irte_pi,0 ,sizeof (irte_pi)); +dmar_copy_shared_irte (&irte_pi, &ir_data->irte_entry); + +/* Update the posted mode fields */ + irte_pi.p_pst =1 ; + irte_pi.p_urgent =0 ; + irte_pi.p_vector = vcpu_pi_info->vector; + irte_pi.pda_l = (vcpu_pi_info->pi_desc_addr >> + (32 -PDA_LOW_BIT )) & ~(-1UL <<PDA_LOW_BIT ); + irte_pi.pda_h = (vcpu_pi_info->pi_desc_addr >>32 ) & + ~(-1UL <<PDA_HIGH_BIT ); + +modify_irte (&ir_data->irq_2_iommu, &irte_pi); + } + +return 0 ; +} +static struct irq_chip intel_ir_chip = { .irq_ack = ir_ack_apic_edge, .irq_set_affinity = intel_ir_set_affinity, .irq_compose_msi_msg = intel_ir_compose_msi_msg, + .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity, }; static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
Commit-ID: 8541186faf3b59623c86022cc5f21ce9bd1332c5 Gitweb: http://git.kernel.org/tip/8541186faf3b59623c86022cc5f21ce9bd1332c5 Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:31 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
Interrupt chip callback to set the VCPU affinity for posted interrupts.
[ tglx: Use the helper function to copy from the remap irte instead of
open coding it. Massage the comment as well ]
--- arch/x86/include/asm/irq_remapping.h | 5 +++++ drivers/iommu/intel_irq_remapping.c | 37 ++++++++++++++++++++++++++++++++++++ 2 files changed, 42 insertions(+)
arch/x86/include/asm/irq_remapping.h +5 -0
@@ -57,6 +57,11 @@ static inline struct irq_domain *arch_get_ir_parent_domain(void) return x86_vector_domain; } +struct vcpu_data { +u64 pi_desc_addr;/* Physical address of PI Descriptor */ +u32 vector;/* Guest vector of the interrupt */ +}; +#else /* CONFIG_IRQ_REMAP */ static inline void set_irq_remapping_broken (void ) { }
drivers/iommu/intel_irq_remapping.c +37 -0
@@ -1013,10 +1013,47 @@ static void intel_ir_compose_msi_msg(struct irq_data *irq_data, *msg = ir_data->msi_entry; } +static int intel_ir_set_vcpu_affinity (struct irq_data *data,void *info) +{ +struct intel_ir_data *ir_data = data->chip_data; +struct vcpu_data *vcpu_pi_info = info; + +/* stop posting interrupts, back to remapping mode */ +if (!vcpu_pi_info) { +modify_irte (&ir_data->irq_2_iommu, &ir_data->irte_entry); + }else { +struct irte irte_pi; + +/* +* We are not caching the posted interrupt entry. We +* copy the data from the remapped entry and modify +* the fields which are relevant for posted mode. The +* cached remapped entry is used for switching back to +* remapped mode. +*/ +memset (&irte_pi,0 ,sizeof (irte_pi)); +dmar_copy_shared_irte (&irte_pi, &ir_data->irte_entry); + +/* Update the posted mode fields */ + irte_pi.p_pst =1 ; + irte_pi.p_urgent =0 ; + irte_pi.p_vector = vcpu_pi_info->vector; + irte_pi.pda_l = (vcpu_pi_info->pi_desc_addr >> + (32 -PDA_LOW_BIT )) & ~(-1UL <<PDA_LOW_BIT ); + irte_pi.pda_h = (vcpu_pi_info->pi_desc_addr >>32 ) & + ~(-1UL <<PDA_HIGH_BIT ); + +modify_irte (&ir_data->irq_2_iommu, &irte_pi); + } + +return 0 ; +} +static struct irq_chip intel_ir_chip = { .irq_ack = ir_ack_apic_edge, .irq_set_affinity = intel_ir_set_affinity, .irq_compose_msi_msg = intel_ir_compose_msi_msg, + .irq_set_vcpu_affinity = intel_ir_set_vcpu_affinity, }; static void intel_irq_remapping_prepare_irte(struct intel_ir_data *data,
PATCH v10 5/10 iommu, x86: Save the mode (posted or remapped) of an IRTE
In reply to Feng WuAdd a new field to struct irq_2_iommu, which captures whether the associated IRTE is in posted mode or remapped mode. We update this field when the IRTE is written into the table.
--- drivers/iommu/intel_irq_remapping.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/iommu/intel_irq_remapping.c +10 -0
@@ -18,6 +18,11 @@#include "irq_remapping.h" +enum irq_mode { +IRQ_REMAPPING , +IRQ_POSTING , +}; +struct ioapic_scope {struct intel_iommu *iommu;unsigned int id;
@@ -37,6 +42,7 @@ struct irq_2_iommu {u16 irte_index;u16 sub_handle;u8 irte_mask; +enum irq_mode mode; };struct intel_ir_data {
@@ -104,6 +110,7 @@ static int alloc_irte(struct intel_iommu *iommu, int irq, irq_iommu->irte_index = index; irq_iommu->sub_handle =0 ; irq_iommu->irte_mask = mask; + irq_iommu->mode =IRQ_REMAPPING ; }raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags);
@@ -144,6 +151,9 @@ static int modify_irte(struct irq_2_iommu *irq_iommu,__iommu_flush_cache (iommu, irte,sizeof (*irte)); rc =qi_flush_iec (iommu, index,0 ); + +/* Update iommu mode according to the IRTE mode */ + irq_iommu->mode = irte->pst ?IRQ_POSTING :IRQ_REMAPPING ;raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags);return rc;
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Save the mode (posted or remapped) of an IRTE
Commit-ID: 2705a3d2a690c3dd9f58c7d788bc0f432acdeceb Gitweb: http://git.kernel.org/tip/2705a3d2a690c3dd9f58c7d788bc0f432acdeceb Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:32 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Save the mode (posted or remapped) of an IRTE
Add a new field to struct irq_2_iommu, which captures whether the associated IRTE is in posted mode or remapped mode. We update this field when the IRTE is written into the table.
--- drivers/iommu/intel_irq_remapping.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
drivers/iommu/intel_irq_remapping.c +10 -0
@@ -18,6 +18,11 @@#include "irq_remapping.h" +enum irq_mode { +IRQ_REMAPPING , +IRQ_POSTING , +}; +struct ioapic_scope {struct intel_iommu *iommu;unsigned int id;
@@ -37,6 +42,7 @@ struct irq_2_iommu {u16 irte_index;u16 sub_handle;u8 irte_mask; +enum irq_mode mode; };struct intel_ir_data {
@@ -104,6 +110,7 @@ static int alloc_irte(struct intel_iommu *iommu, int irq, irq_iommu->irte_index = index; irq_iommu->sub_handle =0 ; irq_iommu->irte_mask = mask; + irq_iommu->mode =IRQ_REMAPPING ; }raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags);
@@ -144,6 +151,9 @@ static int modify_irte(struct irq_2_iommu *irq_iommu,__iommu_flush_cache (iommu, irte,sizeof (*irte)); rc =qi_flush_iec (iommu, index,0 ); + +/* Update iommu mode according to the IRTE mode */ + irq_iommu->mode = irte->pst ?IRQ_POSTING :IRQ_REMAPPING ;raw_spin_unlock_irqrestore (&irq_2_ir_lock, flags);return rc;
PATCH v10 6/10 iommu, x86: Avoid migrating VT-d posted interrupts
In reply to Feng WuWhen the interrupt is configured in posted mode, the destination of the interrupt is set in the Posted-Interrupts Descriptor and the migration of these interrupts happens during vCPU scheduling.
We still update the cached irte, which will be used when changing back to remapping mode, but we avoid writing the table entry.
--- drivers/iommu/intel_irq_remapping.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iommu/intel_irq_remapping.c +4 -1
@@ -1003,7 +1003,10 @@ intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask,*/ irte->vector = cfg->vector; irte->dest_id =IRTE_DEST (cfg->dest_apicid); -modify_irte (&ir_data->irq_2_iommu, irte); + +/* Update the hardware only if the interrupt is in remapped mode. */ +if (ir_data->irq_2_iommu.mode ==IRQ_REMAPPING ) +modify_irte (&ir_data->irq_2_iommu, irte);/* * After this point, all the interrupts will start arriving
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Avoid migrating VT-d posted interrupts
Commit-ID: d75f152fc389cdd73a6c17f1247fce9052fd579c Gitweb: http://git.kernel.org/tip/d75f152fc389cdd73a6c17f1247fce9052fd579c Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:33 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Avoid migrating VT-d posted interrupts
When the interrupt is configured in posted mode, the destination of the interrupt is set in the Posted-Interrupts Descriptor and the migration of these interrupts happens during vCPU scheduling.
We still update the cached irte, which will be used when changing back to remapping mode, but we avoid writing the table entry as this would overwrite the posted mode entry.
--- drivers/iommu/intel_irq_remapping.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
drivers/iommu/intel_irq_remapping.c +4 -1
@@ -1003,7 +1003,10 @@ intel_ir_set_affinity(struct irq_data *data, const struct cpumask *mask,*/ irte->vector = cfg->vector; irte->dest_id =IRTE_DEST (cfg->dest_apicid); -modify_irte (&ir_data->irq_2_iommu, irte); + +/* Update the hardware only if the interrupt is in remapped mode. */ +if (ir_data->irq_2_iommu.mode ==IRQ_REMAPPING ) +modify_irte (&ir_data->irq_2_iommu, irte);/* * After this point, all the interrupts will start arriving
PATCH v10 7/10 iommu, x86: Add cap_pi_support() to detect VT-d PI capability
In reply to Feng WuAdd helper function to detect VT-d Posted-Interrupts capability.
--- include/linux/intel-iommu.h | 1 + 1 file changed, 1 insertion(+)
include/linux/intel-iommu.h +1 -0
@@ -87,6 +87,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)/* * Decoding Capability Register */ +#define cap_pi_support (c) (((c) >> 59) & 1)#define cap_read_drain (c) (((c) >> 55) & 1)#define cap_write_drain (c) (((c) >> 54) & 1)#define cap_max_amask_val (c) (((c) >> 48) & 0x3f)
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
Commit-ID: 07c09787b26db724c94a912a572a9a4fa66008f3 Gitweb: http://git.kernel.org/tip/07c09787b26db724c94a912a572a9a4fa66008f3 Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:34 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
Add helper function to detect VT-d Posted-Interrupts capability.
--- include/linux/intel-iommu.h | 1 + 1 file changed, 1 insertion(+)
include/linux/intel-iommu.h +1 -0
@@ -87,6 +87,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val)/* * Decoding Capability Register */ +#define cap_pi_support (c) (((c) >> 59) & 1)#define cap_read_drain (c) (((c) >> 55) & 1)#define cap_write_drain (c) (((c) >> 54) & 1)#define cap_max_amask_val (c) (((c) >> 48) & 0x3f)
PATCH v10 8/10 iommu, x86: Setup Posted-Interrupts capability for Intel iommu
In reply to Feng WuSet Posted-Interrupts capability for Intel iommu when Interrupt Remapping is enabled, clear it when disabled.
--- drivers/iommu/intel_irq_remapping.c | 30 ++++++++++++++++++++++++++++++ drivers/iommu/irq_remapping.c | 2 ++ drivers/iommu/irq_remapping.h | 3 +++ 3 files changed, 35 insertions(+)
drivers/iommu/intel_irq_remapping.c +30 -0
@@ -581,6 +581,26 @@ error:return -ENODEV ; } +/* +* Set Posted-Interrupts capability. +*/ +static inline void set_irq_posting_cap (void ) +{ +struct dmar_drhd_unit *drhd; +struct intel_iommu *iommu; + +if (!disable_irq_post) { + intel_irq_remap_ops.capability |=1 <<IRQ_POSTING_CAP ; + +for_each_iommu (iommu, drhd) +if (!cap_pi_support (iommu->cap)) { + intel_irq_remap_ops.capability &= + ~(1 <<IRQ_POSTING_CAP ); +break ; + } + } +} +static int __init intel_enable_irq_remapping (void ) {struct dmar_drhd_unit *drhd;
@@ -656,6 +676,8 @@ static int __init intel_enable_irq_remapping(void) irq_remapping_enabled =1 ; +set_irq_posting_cap (); +pr_info ("Enabled IRQ remapping in %s mode\n" , eim ?"x2apic" :"xapic" );return eim ?IRQ_REMAP_X2APIC_MODE :IRQ_REMAP_XAPIC_MODE ;
@@ -856,6 +878,12 @@ static void disable_irq_remapping(void)iommu_disable_irq_remapping (iommu); } + +/* +* Clear Posted-Interrupts capability. +*/ +if (!disable_irq_post) + intel_irq_remap_ops.capability &= ~(1 <<IRQ_POSTING_CAP ); }static int reenable_irq_remapping (int eim)
@@ -883,6 +911,8 @@ static int reenable_irq_remapping(int eim)if (!setup) goto error; +set_irq_posting_cap (); +return 0 ; error:
drivers/iommu/irq_remapping.c +2 -0
@@ -22,6 +22,8 @@ int irq_remap_broken;int disable_sourceid_checking;int no_x2apic_optout; +int disable_irq_post =1 ; +static int disable_irq_remap;static struct irq_remap_ops *remap_ops;
drivers/iommu/irq_remapping.h +3 -0
@@ -34,6 +34,8 @@ extern int disable_sourceid_checking;extern int no_x2apic_optout;extern int irq_remapping_enabled; +extern int disable_irq_post; +struct irq_remap_ops {/* The supported capabilities */ int capability;
@@ -69,6 +71,7 @@ extern void ir_ack_apic_edge(struct irq_data *data);#define irq_remapping_enabled 0#define irq_remap_broken 0 +#define disable_irq_post 1#endif /* CONFIG_IRQ_REMAP */
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
Commit-ID: 3d9b98f4ec17ba8d555f1972a3870035a87574a0 Gitweb: http://git.kernel.org/tip/3d9b98f4ec17ba8d555f1972a3870035a87574a0 Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:35 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
Set Posted-Interrupts capability for Intel iommu when Interrupt Remapping is enabled, clear it when disabled.
--- drivers/iommu/intel_irq_remapping.c | 30 ++++++++++++++++++++++++++++++ drivers/iommu/irq_remapping.c | 2 ++ drivers/iommu/irq_remapping.h | 3 +++ 3 files changed, 35 insertions(+)
drivers/iommu/intel_irq_remapping.c +30 -0
@@ -581,6 +581,26 @@ error:return -ENODEV ; } +/* +* Set Posted-Interrupts capability. +*/ +static inline void set_irq_posting_cap (void ) +{ +struct dmar_drhd_unit *drhd; +struct intel_iommu *iommu; + +if (!disable_irq_post) { + intel_irq_remap_ops.capability |=1 <<IRQ_POSTING_CAP ; + +for_each_iommu (iommu, drhd) +if (!cap_pi_support (iommu->cap)) { + intel_irq_remap_ops.capability &= + ~(1 <<IRQ_POSTING_CAP ); +break ; + } + } +} +static int __init intel_enable_irq_remapping (void ) {struct dmar_drhd_unit *drhd;
@@ -656,6 +676,8 @@ static int __init intel_enable_irq_remapping(void) irq_remapping_enabled =1 ; +set_irq_posting_cap (); +pr_info ("Enabled IRQ remapping in %s mode\n" , eim ?"x2apic" :"xapic" );return eim ?IRQ_REMAP_X2APIC_MODE :IRQ_REMAP_XAPIC_MODE ;
@@ -856,6 +878,12 @@ static void disable_irq_remapping(void)iommu_disable_irq_remapping (iommu); } + +/* +* Clear Posted-Interrupts capability. +*/ +if (!disable_irq_post) + intel_irq_remap_ops.capability &= ~(1 <<IRQ_POSTING_CAP ); }static int reenable_irq_remapping (int eim)
@@ -883,6 +911,8 @@ static int reenable_irq_remapping(int eim)if (!setup) goto error; +set_irq_posting_cap (); +return 0 ; error:
drivers/iommu/irq_remapping.c +2 -0
@@ -22,6 +22,8 @@ int irq_remap_broken;int disable_sourceid_checking;int no_x2apic_optout; +int disable_irq_post =1 ; +static int disable_irq_remap;static struct irq_remap_ops *remap_ops;
drivers/iommu/irq_remapping.h +3 -0
@@ -34,6 +34,8 @@ extern int disable_sourceid_checking;extern int no_x2apic_optout;extern int irq_remapping_enabled; +extern int disable_irq_post; +struct irq_remap_ops {/* The supported capabilities */ int capability;
@@ -69,6 +71,7 @@ extern void ir_ack_apic_edge(struct irq_data *data);#define irq_remapping_enabled 0#define irq_remap_broken 0 +#define disable_irq_post 1#endif /* CONFIG_IRQ_REMAP */
PATCH v10 9/10 iommu, x86: Provide irq_remapping_cap() interface
In reply to Feng WuAdd a new interface irq_remapping_cap() to detect whether irq remapping supports new features, such as VT-d Posted-Interrupts.
Export the function, so that KVM code can check this and use this mechanism properly.
--- arch/x86/include/asm/irq_remapping.h | 2 ++ drivers/iommu/irq_remapping.c | 9 +++++++++ 2 files changed, 11 insertions(+)
arch/x86/include/asm/irq_remapping.h +2 -0
@@ -35,6 +35,7 @@ enum irq_remap_cap {#ifdef CONFIG_IRQ_REMAP +extern bool irq_remapping_cap (enum irq_remap_cap cap);extern void set_irq_remapping_broken (void );extern int irq_remapping_prepare (void );extern int irq_remapping_enable (void );
@@ -64,6 +65,7 @@ struct vcpu_data {#else /* CONFIG_IRQ_REMAP */ +static inline bool irq_remapping_cap (enum irq_remap_cap cap) {return 0 ; }static inline void set_irq_remapping_broken (void ) { }static inline int irq_remapping_prepare (void ) {return -ENODEV ; }static inline int irq_remapping_enable (void ) {return -ENODEV ; }
drivers/iommu/irq_remapping.c +9 -0
@@ -81,6 +81,15 @@ void set_irq_remapping_broken(void) irq_remap_broken =1 ; } +bool irq_remapping_cap (enum irq_remap_cap cap) +{ +if (!remap_ops || disable_irq_post) +return 0 ; + +return (remap_ops->capability & (1 << cap)); +} +EXPORT_SYMBOL_GPL (irq_remapping_cap); +int __init irq_remapping_prepare (void ) {if (disable_irq_remap)
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Provide irq_remapping_cap() interface
Commit-ID: 959c870f7305be019d9316bc4e038dc6119d51ad Gitweb: http://git.kernel.org/tip/959c870f7305be019d9316bc4e038dc6119d51ad Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:36 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Provide irq_remapping_cap() interface
Add a new interface irq_remapping_cap() to detect whether irq remapping supports new features, such as VT-d Posted-Interrupts.
Export the function, so that KVM code can check this and use this mechanism properly.
--- arch/x86/include/asm/irq_remapping.h | 2 ++ drivers/iommu/irq_remapping.c | 9 +++++++++ 2 files changed, 11 insertions(+)
arch/x86/include/asm/irq_remapping.h +2 -0
@@ -35,6 +35,7 @@ enum irq_remap_cap {#ifdef CONFIG_IRQ_REMAP +extern bool irq_remapping_cap (enum irq_remap_cap cap);extern void set_irq_remapping_broken (void );extern int irq_remapping_prepare (void );extern int irq_remapping_enable (void );
@@ -64,6 +65,7 @@ struct vcpu_data {#else /* CONFIG_IRQ_REMAP */ +static inline bool irq_remapping_cap (enum irq_remap_cap cap) {return 0 ; }static inline void set_irq_remapping_broken (void ) { }static inline int irq_remapping_prepare (void ) {return -ENODEV ; }static inline int irq_remapping_enable (void ) {return -ENODEV ; }
drivers/iommu/irq_remapping.c +9 -0
@@ -81,6 +81,15 @@ void set_irq_remapping_broken(void) irq_remap_broken =1 ; } +bool irq_remapping_cap (enum irq_remap_cap cap) +{ +if (!remap_ops || disable_irq_post) +return 0 ; + +return (remap_ops->capability & (1 << cap)); +} +EXPORT_SYMBOL_GPL (irq_remapping_cap); +int __init irq_remapping_prepare (void ) {if (disable_irq_remap)
PATCH v10 10/10 iommu, x86: Properly handle posted interrupts for IOMMU hotplug
In reply to Feng WuReturn error when inserting a new IOMMU which doesn't support posted interrupts if posted interrupts are already enabled.
--- drivers/iommu/intel_irq_remapping.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/iommu/intel_irq_remapping.c +3 -0
@@ -1355,6 +1355,9 @@ int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)return -EINVAL ;if (!ecap_ir_support (iommu->ecap))return 0 ; +if (irq_remapping_cap (IRQ_POSTING_CAP ) && + !cap_pi_support (iommu->cap)) +return -EBUSY ;if (insert) {if (!iommu->ir_table)
Signature · 1 line
2.1.0
tip-bot for Feng Wu
merge bot[tip:x86/apic] iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
Commit-ID: c1d993341e46867af9412cf7f93f535895bbe3a7 Gitweb: http://git.kernel.org/tip/c1d993341e46867af9412cf7f93f535895bbe3a7 Author: Feng Wu <[email protected]> AuthorDate: Tue, 9 Jun 2015 13:20:37 +0800 Committer: Thomas Gleixner <[email protected]> CommitDate: Fri, 12 Jun 2015 11:33:52 +0200
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
Return error when inserting a new IOMMU which doesn't support posted interrupts if posted interrupts are already enabled.
--- drivers/iommu/intel_irq_remapping.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/iommu/intel_irq_remapping.c +3 -0
@@ -1355,6 +1355,9 @@ int dmar_ir_hotplug(struct dmar_drhd_unit *dmaru, bool insert)return -EINVAL ;if (!ecap_ir_support (iommu->ecap))return 0 ; +if (irq_remapping_cap (IRQ_POSTING_CAP ) && + !cap_pi_support (iommu->cap)) +return -EBUSY ;if (insert) {if (!iommu->ir_table)