avr32: remove non-generic boards
cover avr32: remove non-generic boards
This series deletes avr32-boards that are still using the ancient arch/avr32/lib/board.c code. If one would like his board to stay in u-boot there is a last chance to convert it to generic board _now_. It should be as easy as defining these three values in the board config:
|/* generic board */ |#define CONFIG_SYS_GENERIC_BOARD |#define CONFIG_BOARD_EARLY_INIT_F |#define CONFIG_BOARD_EARLY_INIT_R
The patch 'avr32: delete non generic board favr-32-ezkit' has an checkpatch warning which will not be fixed.
---8<---
0 errors, 1 warnings, 0 checks for 0002-avr32-delete-non-generic-board-favr-32-ezkit.patch:
warning: arch/avr32/Kconfig,22: please write a paragraph that describes the config symbol fully --->8---
The patch 'avr32: delete non generic board's atstk100{3,4,6}' has a checkpatch warning wich will not be fixed.
---8<---
0 errors, 1 warnings, 0 checks for 0005-avr32-delete-non-generic-board-s-atstk100-3-4-6.patch:
warning: arch/avr32/Kconfig,13: please write a paragraph that describes the config symbol fully --->8---
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancient board.c
arch/avr32/Kconfig | 25 --- arch/avr32/lib/Makefile | 3 - arch/avr32/lib/board.c | 256 --------------------------- board/atmel/atngw100/Kconfig | 15 -- board/atmel/atngw100/MAINTAINERS | 6 - board/atmel/atngw100/Makefile | 6 - board/atmel/atngw100/atngw100.c | 109 ------------ board/atmel/atstk1000/Kconfig | 48 ----- board/atmel/atstk1000/MAINTAINERS | 10 +- board/atmel/atstk1000/atstk1000.c | 23 +-- board/earthlcd/favr-32-ezkit/Kconfig | 15 -- board/earthlcd/favr-32-ezkit/MAINTAINERS | 6 - board/earthlcd/favr-32-ezkit/Makefile | 9 - board/earthlcd/favr-32-ezkit/favr-32-ezkit.c | 81 --------- board/earthlcd/favr-32-ezkit/flash.c | 216 ---------------------- board/mimc/mimc200/Kconfig | 15 -- board/mimc/mimc200/MAINTAINERS | 6 - board/mimc/mimc200/Makefile | 6 - board/mimc/mimc200/mimc200.c | 197 --------------------- board/miromico/hammerhead/Kconfig | 15 -- board/miromico/hammerhead/MAINTAINERS | 6 - board/miromico/hammerhead/Makefile | 6 - board/miromico/hammerhead/hammerhead.c | 91 ---------- configs/atngw100_defconfig | 2 - configs/atstk1003_defconfig | 2 - configs/atstk1004_defconfig | 2 - configs/atstk1006_defconfig | 2 - configs/favr-32-ezkit_defconfig | 2 - configs/hammerhead_defconfig | 2 - configs/mimc200_defconfig | 2 - include/configs/atngw100.h | 163 ----------------- include/configs/atstk1003.h | 161 ----------------- include/configs/atstk1004.h | 161 ----------------- include/configs/atstk1006.h | 178 ------------------- include/configs/favr-32-ezkit.h | 181 ------------------- include/configs/hammerhead.h | 157 ---------------- include/configs/mimc200.h | 177 ------------------ 37 files changed, 3 insertions(+), 2359 deletions(-) delete mode 100644 arch/avr32/lib/board.c delete mode 100644 board/atmel/atngw100/Kconfig delete mode 100644 board/atmel/atngw100/MAINTAINERS delete mode 100644 board/atmel/atngw100/Makefile delete mode 100644 board/atmel/atngw100/atngw100.c delete mode 100644 board/earthlcd/favr-32-ezkit/Kconfig delete mode 100644 board/earthlcd/favr-32-ezkit/MAINTAINERS delete mode 100644 board/earthlcd/favr-32-ezkit/Makefile delete mode 100644 board/earthlcd/favr-32-ezkit/favr-32-ezkit.c delete mode 100644 board/earthlcd/favr-32-ezkit/flash.c delete mode 100644 board/mimc/mimc200/Kconfig delete mode 100644 board/mimc/mimc200/MAINTAINERS delete mode 100644 board/mimc/mimc200/Makefile delete mode 100644 board/mimc/mimc200/mimc200.c delete mode 100644 board/miromico/hammerhead/Kconfig delete mode 100644 board/miromico/hammerhead/MAINTAINERS delete mode 100644 board/miromico/hammerhead/Makefile delete mode 100644 board/miromico/hammerhead/hammerhead.c delete mode 100644 configs/atngw100_defconfig delete mode 100644 configs/atstk1003_defconfig delete mode 100644 configs/atstk1004_defconfig delete mode 100644 configs/atstk1006_defconfig delete mode 100644 configs/favr-32-ezkit_defconfig delete mode 100644 configs/hammerhead_defconfig delete mode 100644 configs/mimc200_defconfig delete mode 100644 include/configs/atngw100.h delete mode 100644 include/configs/atstk1003.h delete mode 100644 include/configs/atstk1004.h delete mode 100644 include/configs/atstk1006.h delete mode 100644 include/configs/favr-32-ezkit.h delete mode 100644 include/configs/hammerhead.h delete mode 100644 include/configs/mimc200.h
Signature · 1 line
2.1.4
PATCH 1/7 avr32: delete non generic board atngw100
---
arch/avr32/Kconfig | 4 - board/atmel/atngw100/Kconfig | 15 ---- board/atmel/atngw100/MAINTAINERS | 6 -- board/atmel/atngw100/Makefile | 6 -- board/atmel/atngw100/atngw100.c | 109 -------------------------- configs/atngw100_defconfig | 2 - include/configs/atngw100.h | 163 --------------------------------------- 7 files changed, 305 deletions(-) delete mode 100644 board/atmel/atngw100/Kconfig delete mode 100644 board/atmel/atngw100/MAINTAINERS delete mode 100644 board/atmel/atngw100/Makefile delete mode 100644 board/atmel/atngw100/atngw100.c delete mode 100644 configs/atngw100_defconfig delete mode 100644 include/configs/atngw100.h
arch/avr32/Kconfig +0 -4
@@ -7,9 +7,6 @@ config SYS_ARCH choice prompt "Target select" -config TARGET_ATNGW100 - bool "Support atngw100" - config TARGET_ATNGW100MKII bool "Support atngw100mkii"
@@ -39,7 +36,6 @@ config TARGET_HAMMERHEAD endchoice -source "board/atmel/atngw100/Kconfig" source "board/atmel/atngw100mkii/Kconfig" source "board/atmel/atstk1000/Kconfig" source "board/earthlcd/favr-32-ezkit/Kconfig"
board/atmel/atngw100/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_ATNGW100 - -config SYS_BOARD - default "atngw100" - -config SYS_VENDOR - default "atmel" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "atngw100" - -endif
board/atmel/atngw100/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -ATNGW100 BOARD -#M: Haavard Skinnemoen <[email protected]> -S: Orphan (since 2014-06) -F: board/atmel/atngw100/ -F: include/configs/atngw100.h -F: configs/atngw100_defconfig
board/atmel/atngw100/Makefile deleted +0 -6
@@ -1,6 +0,0 @@ -# -# Copyright (C) 2005-2006 Atmel Corporation -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := atngw100.o
board/atmel/atngw100/atngw100.c deleted +0 -109
109 lines not on this page · raw message
configs/atngw100_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATNGW100=y
include/configs/atngw100.h deleted +0 -163
163 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 2/7 avr32: delete non generic board favr-32-ezkit
In reply to Andreas Bießmann---
arch/avr32/Kconfig | 4 - board/earthlcd/favr-32-ezkit/Kconfig | 15 -- board/earthlcd/favr-32-ezkit/MAINTAINERS | 6 - board/earthlcd/favr-32-ezkit/Makefile | 9 -- board/earthlcd/favr-32-ezkit/favr-32-ezkit.c | 81 ---------- board/earthlcd/favr-32-ezkit/flash.c | 216 --------------------------- configs/favr-32-ezkit_defconfig | 2 - include/configs/favr-32-ezkit.h | 181 ---------------------- 8 files changed, 514 deletions(-) delete mode 100644 board/earthlcd/favr-32-ezkit/Kconfig delete mode 100644 board/earthlcd/favr-32-ezkit/MAINTAINERS delete mode 100644 board/earthlcd/favr-32-ezkit/Makefile delete mode 100644 board/earthlcd/favr-32-ezkit/favr-32-ezkit.c delete mode 100644 board/earthlcd/favr-32-ezkit/flash.c delete mode 100644 configs/favr-32-ezkit_defconfig delete mode 100644 include/configs/favr-32-ezkit.h
arch/avr32/Kconfig +0 -4
@@ -22,9 +22,6 @@ config TARGET_ATSTK1004 config TARGET_ATSTK1006 bool "Support atstk1006" -config TARGET_FAVR_32_EZKIT - bool "Support favr-32-ezkit" - config TARGET_GRASSHOPPER bool "Support grasshopper"
@@ -38,7 +35,6 @@ endchoice source "board/atmel/atngw100mkii/Kconfig" source "board/atmel/atstk1000/Kconfig" -source "board/earthlcd/favr-32-ezkit/Kconfig" source "board/in-circuit/grasshopper/Kconfig" source "board/mimc/mimc200/Kconfig" source "board/miromico/hammerhead/Kconfig"
board/earthlcd/favr-32-ezkit/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_FAVR_32_EZKIT - -config SYS_BOARD - default "favr-32-ezkit" - -config SYS_VENDOR - default "earthlcd" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "favr-32-ezkit" - -endif
board/earthlcd/favr-32-ezkit/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -FAVR-32-EZKIT BOARD -#M: Hans-Christian Egtvedt <[email protected]> -S: Orphan (since 2014-06) -F: board/earthlcd/favr-32-ezkit/ -F: include/configs/favr-32-ezkit.h -F: configs/favr-32-ezkit_defconfig
board/earthlcd/favr-32-ezkit/Makefile deleted +0 -9
@@ -1,9 +0,0 @@ -# -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd at denx.de. -# -# Copyright (C) 2008 Atmel Corporation -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := favr-32-ezkit.o flash.o
board/earthlcd/favr-32-ezkit/favr-32-ezkit.c deleted +0 -81
81 lines not on this page · raw message
board/earthlcd/favr-32-ezkit/flash.c deleted +0 -216
216 lines not on this page · raw message
configs/favr-32-ezkit_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_FAVR_32_EZKIT=y
include/configs/favr-32-ezkit.h deleted +0 -181
181 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 2/7 avr32: delete non generic board favr-32-ezkit
Dear =?utf-8?q?Andreas_Bie=C3=9Fmann?=,
Quoted 11 lines · Andreas Devel
Signed-off-by Andreas Bie?mann <[email protected]>---
arch/avr32/Kconfig | 4 - board/earthlcd/favr-32-ezkit/Kconfig | 15 -- board/earthlcd/favr-32-ezkit/MAINTAINERS | 6 - board/earthlcd/favr-32-ezkit/Makefile | 9 -- board/earthlcd/favr-32-ezkit/favr-32-ezkit.c | 81 ---------- board/earthlcd/favr-32-ezkit/flash.c | 216 --------------------------- configs/favr-32-ezkit_defconfig | 7 - include/configs/favr-32-ezkit.h | 171 --------------------- 8 files changed, 509 deletions(-)
Quoted 7 lines
delete mode 100644 board/earthlcd/favr-32-ezkit/Kconfig delete mode 100644 board/earthlcd/favr-32-ezkit/MAINTAINERS delete mode 100644 board/earthlcd/favr-32-ezkit/Makefile delete mode 100644
board/earthlcd/favr-32-ezkit/favr-32-ezkit.cdelete mode 100644board/earthlcd/favr-32-ezkit/flash.cdelete mode 100644 configs/favr-32-ezkit_defconfig delete mode 100644include/configs/favr-32-ezkit.h
applied to u-boot-avr32/master, thanks!
Best regards,
Andreas Bie?mann
PATCH 3/7 avr32: delete non generic board hammerhead
In reply to Andreas Bießmann---
arch/avr32/Kconfig | 4 - board/miromico/hammerhead/Kconfig | 15 ---- board/miromico/hammerhead/MAINTAINERS | 6 -- board/miromico/hammerhead/Makefile | 6 -- board/miromico/hammerhead/hammerhead.c | 91 ------------------- configs/hammerhead_defconfig | 2 - include/configs/hammerhead.h | 157 --------------------------------- 7 files changed, 281 deletions(-) delete mode 100644 board/miromico/hammerhead/Kconfig delete mode 100644 board/miromico/hammerhead/MAINTAINERS delete mode 100644 board/miromico/hammerhead/Makefile delete mode 100644 board/miromico/hammerhead/hammerhead.c delete mode 100644 configs/hammerhead_defconfig delete mode 100644 include/configs/hammerhead.h
arch/avr32/Kconfig +0 -4
@@ -28,15 +28,11 @@ config TARGET_GRASSHOPPER config TARGET_MIMC200 bool "Support mimc200" -config TARGET_HAMMERHEAD - bool "Support hammerhead" - endchoice source "board/atmel/atngw100mkii/Kconfig" source "board/atmel/atstk1000/Kconfig" source "board/in-circuit/grasshopper/Kconfig" source "board/mimc/mimc200/Kconfig" -source "board/miromico/hammerhead/Kconfig" endmenu
board/miromico/hammerhead/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_HAMMERHEAD - -config SYS_BOARD - default "hammerhead" - -config SYS_VENDOR - default "miromico" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "hammerhead" - -endif
board/miromico/hammerhead/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -HAMMERHEAD BOARD -M: Alex Raimondi <[email protected]> -S: Maintained -F: board/miromico/hammerhead/ -F: include/configs/hammerhead.h -F: configs/hammerhead_defconfig
board/miromico/hammerhead/Makefile deleted +0 -6
@@ -1,6 +0,0 @@ -# -# Copyright (C) 2008 Miromico AG -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := hammerhead.o
board/miromico/hammerhead/hammerhead.c deleted +0 -91
91 lines not on this page · raw message
configs/hammerhead_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_HAMMERHEAD=y
include/configs/hammerhead.h deleted +0 -157
157 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 3/7 avr32: delete non generic board hammerhead
Dear =?utf-8?q?Andreas_Bie=C3=9Fmann?=,
Quoted 10 lines · Andreas Devel
Signed-off-by Andreas Bie?mann <[email protected]>---
arch/avr32/Kconfig | 4 - board/miromico/hammerhead/Kconfig | 15 ---- board/miromico/hammerhead/MAINTAINERS | 6 -- board/miromico/hammerhead/Makefile | 6 -- board/miromico/hammerhead/hammerhead.c | 91 -------------------- configs/hammerhead_defconfig | 7 -- include/configs/hammerhead.h | 147 --------------------------------- 7 files changed, 276 deletions(-)
Quoted 6 lines
delete mode 100644 board/miromico/hammerhead/Kconfig delete mode 100644 board/miromico/hammerhead/MAINTAINERS delete mode 100644 board/miromico/hammerhead/Makefile delete mode 100644
board/miromico/hammerhead/hammerhead.cdelete mode 100644 configs/hammerhead_defconfig delete mode 100644include/configs/hammerhead.h
applied to u-boot-avr32/master, thanks!
Best regards,
Andreas Bie?mann
PATCH 4/7 avr32: delete non generic board mimc200
In reply to Andreas Bießmann---
arch/avr32/Kconfig | 4 - board/mimc/mimc200/Kconfig | 15 ---- board/mimc/mimc200/MAINTAINERS | 6 -- board/mimc/mimc200/Makefile | 6 -- board/mimc/mimc200/mimc200.c | 197 ----------------------------------------- configs/mimc200_defconfig | 2 - include/configs/mimc200.h | 177 ------------------------------------ 7 files changed, 407 deletions(-) delete mode 100644 board/mimc/mimc200/Kconfig delete mode 100644 board/mimc/mimc200/MAINTAINERS delete mode 100644 board/mimc/mimc200/Makefile delete mode 100644 board/mimc/mimc200/mimc200.c delete mode 100644 configs/mimc200_defconfig delete mode 100644 include/configs/mimc200.h
arch/avr32/Kconfig +0 -4
@@ -25,14 +25,10 @@ config TARGET_ATSTK1006 config TARGET_GRASSHOPPER bool "Support grasshopper" -config TARGET_MIMC200 - bool "Support mimc200" - endchoice source "board/atmel/atngw100mkii/Kconfig" source "board/atmel/atstk1000/Kconfig" source "board/in-circuit/grasshopper/Kconfig" -source "board/mimc/mimc200/Kconfig" endmenu
board/mimc/mimc200/Kconfig deleted +0 -15
@@ -1,15 +0,0 @@ -if TARGET_MIMC200 - -config SYS_BOARD - default "mimc200" - -config SYS_VENDOR - default "mimc" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "mimc200" - -endif
board/mimc/mimc200/MAINTAINERS deleted +0 -6
@@ -1,6 +0,0 @@ -MIMC200 BOARD -M: Mark Jackson <[email protected]> -S: Maintained -F: board/mimc/mimc200/ -F: include/configs/mimc200.h -F: configs/mimc200_defconfig
board/mimc/mimc200/Makefile deleted +0 -6
@@ -1,6 +0,0 @@ -# -# Copyright (C) 2005-2006 Atmel Corporation -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := mimc200.o
board/mimc/mimc200/mimc200.c deleted +0 -197
197 lines not on this page · raw message
configs/mimc200_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_MIMC200=y
include/configs/mimc200.h deleted +0 -177
177 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 4/7 avr32: delete non generic board mimc200
Dear =?utf-8?q?Andreas_Bie=C3=9Fmann?=,
Quoted 10 lines · Andreas Devel
Signed-off-by Andreas Bie?mann <[email protected]>---
arch/avr32/Kconfig | 4 - board/mimc/mimc200/Kconfig | 15 ---- board/mimc/mimc200/MAINTAINERS | 6 -- board/mimc/mimc200/Makefile | 6 -- board/mimc/mimc200/mimc200.c | 197 ----------------------------------------- configs/mimc200_defconfig | 3 - include/configs/mimc200.h | 176 ------------------------------------ 7 files changed, 407 deletions(-)
Quoted 6 lines
delete mode 100644 board/mimc/mimc200/Kconfig delete mode 100644 board/mimc/mimc200/MAINTAINERS delete mode 100644 board/mimc/mimc200/Makefile delete mode 100644
board/mimc/mimc200/mimc200.cdelete mode 100644 configs/mimc200_defconfig delete mode 100644include/configs/mimc200.h
applied to u-boot-avr32/master, thanks!
Best regards,
Andreas Bie?mann
PATCH 5/7 avr32: delete non generic board's atstk100{3, 4, 6}
In reply to Andreas Bießmann---
arch/avr32/Kconfig | 9 -- board/atmel/atstk1000/Kconfig | 48 ---------- board/atmel/atstk1000/MAINTAINERS | 6 -- board/atmel/atstk1000/atstk1000.c | 23 +---- configs/atstk1003_defconfig | 2 - configs/atstk1004_defconfig | 2 - configs/atstk1006_defconfig | 2 - include/configs/atstk1003.h | 161 ---------------------------------- include/configs/atstk1004.h | 161 ---------------------------------- include/configs/atstk1006.h | 178 -------------------------------------- 10 files changed, 1 insertion(+), 591 deletions(-) delete mode 100644 configs/atstk1003_defconfig delete mode 100644 configs/atstk1004_defconfig delete mode 100644 configs/atstk1006_defconfig delete mode 100644 include/configs/atstk1003.h delete mode 100644 include/configs/atstk1004.h delete mode 100644 include/configs/atstk1006.h
arch/avr32/Kconfig +0 -9
@@ -13,15 +13,6 @@ config TARGET_ATNGW100MKII config TARGET_ATSTK1002 bool "Support atstk1002" -config TARGET_ATSTK1003 - bool "Support atstk1003" - -config TARGET_ATSTK1004 - bool "Support atstk1004" - -config TARGET_ATSTK1006 - bool "Support atstk1006" - config TARGET_GRASSHOPPER bool "Support grasshopper"
board/atmel/atstk1000/Kconfig +0 -48
51 lines not on this page · raw message
board/atmel/atstk1000/MAINTAINERS +0 -6
@@ -4,9 +4,3 @@ S: Orphan (since 2014-06) F: board/atmel/atstk1000/ F: include/configs/atstk1002.h F: configs/atstk1002_defconfig -F: include/configs/atstk1003.h -F: configs/atstk1003_defconfig -F: include/configs/atstk1004.h -F: configs/atstk1004_defconfig -F: include/configs/atstk1006.h -F: configs/atstk1006_defconfig
board/atmel/atstk1000/atstk1000.c +1 -22
@@ -30,32 +30,12 @@ struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { };static const struct sdram_config sdram_config = { -#if defined(CONFIG_ATSTK1006) -/* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */ .data_bits =SDRAM_DATA_32BIT , - .row_bits =13 , - .col_bits =9 , - .bank_bits =2 , - .cas =2 , - .twr =2 , - .trc =7 , - .trp =2 , - .trcd =2 , - .tras =4 , - .txsr =7 , -/* 7.81 us */ - .refresh_period = (781 * (SDRAMC_BUS_HZ /1000 )) /100000 , -#else - /* MT48LC2M32B2P-5 (8 MB) on motherboard */ -#ifdef CONFIG_ATSTK1004 - .data_bits =SDRAM_DATA_16BIT , -#else - .data_bits =SDRAM_DATA_32BIT , -#endif #ifdef CONFIG_ATSTK1000_16MB_SDRAM/* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */ .row_bits =12 , #else +/* MT48LC2M32B2P-5 (8 MB) on motherboard */ .row_bits =11 , #endif .col_bits =8 ,
@@ -69,7 +49,6 @@ static const struct sdram_config sdram_config = { .txsr = 5, /* 15.6 us */ .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000, -#endif };int board_early_init_f (void )
configs/atstk1003_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATSTK1003=y
configs/atstk1004_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATSTK1004=y
configs/atstk1006_defconfig deleted +0 -2
@@ -1,2 +0,0 @@ -CONFIG_AVR32=y -CONFIG_TARGET_ATSTK1006=y
include/configs/atstk1003.h deleted +0 -161
161 lines not on this page · raw message
include/configs/atstk1004.h deleted +0 -161
161 lines not on this page · raw message
include/configs/atstk1006.h deleted +0 -178
178 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 5/7 avr32: delete non generic board's atstk100{3, 4, 6}
Dear =?utf-8?q?Andreas_Bie=C3=9Fmann?=,
Quoted 13 lines · Andreas Devel
Signed-off-by Andreas Bie?mann <[email protected]>---
arch/avr32/Kconfig | 9 -- board/atmel/atstk1000/Kconfig | 48 ----------- board/atmel/atstk1000/MAINTAINERS | 6 -- board/atmel/atstk1000/atstk1000.c | 23 +----- configs/atstk1003_defconfig | 6 -- configs/atstk1004_defconfig | 6 -- configs/atstk1006_defconfig | 7 -- include/configs/atstk1003.h | 150 ---------------------------------- include/configs/atstk1004.h | 150 ---------------------------------- include/configs/atstk1006.h | 168 -------------------------------------- 10 files changed, 1 insertion(+), 572 deletions(-)
Quoted 6 lines
delete mode 100644 configs/atstk1003_defconfig delete mode 100644 configs/atstk1004_defconfig delete mode 100644 configs/atstk1006_defconfig delete mode 100644
include/configs/atstk1003.hdelete mode 100644include/configs/atstk1004.hdelete mode 100644include/configs/atstk1006.h
applied to u-boot-avr32/master, thanks!
Best regards,
Andreas Bie?mann
PATCH 6/7 avr32: take maintainership for atstk1002
In reply to Andreas BießmannI have this board at work, so I can trun tests on it.
---
board/atmel/atstk1000/MAINTAINERS | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
board/atmel/atstk1000/MAINTAINERS +2 -2
@@ -1,6 +1,6 @@ ATSTK1000 BOARD -#M: Haavard Skinnemoen <[email protected]> -S: Orphan (since 2014-06) +M: Andreas Bie?mann <[email protected]> +S: Maintained F: board/atmel/atstk1000/ F: include/configs/atstk1002.h F: configs/atstk1002_defconfig
Signature · 1 line
2.1.4
PATCH 6/7 avr32: take maintainership for atstk1002
Dear =?utf-8?q?Andreas_Bie=C3=9Fmann?=,
Quoted 7 lines · Andreas Devel
I have this board at work, so I can trun tests on it.
Signed-off-by Andreas Bie?mann <[email protected]>---
board/atmel/atstk1000/MAINTAINERS | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
applied to u-boot-avr32/master, thanks!
Best regards,
Andreas Bie?mann
PATCH 7/7 avr32: delete ancient board.c
In reply to Andreas Bießmann---
arch/avr32/lib/Makefile | 3 - arch/avr32/lib/board.c | 256 ------------------------------------------------ 2 files changed, 259 deletions(-) delete mode 100644 arch/avr32/lib/board.c
arch/avr32/lib/Makefile +0 -3
@@ -8,9 +8,6 @@ # obj-y += memset.o -ifndef CONFIG_SYS_GENERIC_BOARD -obj-y += board.o -endif obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += interrupts.o obj-y += dram_init.o
arch/avr32/lib/board.c deleted +0 -256
256 lines not on this page · raw message
Signature · 1 line
2.1.4
PATCH 7/7 avr32: delete ancient board.c
Dear =?utf-8?q?Andreas_Bie=C3=9Fmann?=,
Quoted 7 lines · Andreas Devel
Signed-off-by Andreas Bie?mann <[email protected]>---
arch/avr32/lib/Makefile| 3 -arch/avr32/lib/board.c| 256 ------------------------------------------------2 files changed, 259 deletions(-)delete mode 100644
arch/avr32/lib/board.c
applied to u-boot-avr32/master, thanks!
Best regards,
Andreas Bie?mann
cover avr32: remove non-generic boards
In reply to Andreas BießmannQuoted 9 lines · Andreas Bie?mann
This series deletes avr32-boards that are still using the ancient
arch/avr32/lib/board.ccode. If one would like his board to stay in u-boot there is a last chance to convert it to generic board _now_. It should be as easy as defining these three values in the board config:|/* generic board */ |#define CONFIG_SYS_GENERIC_BOARD |#define CONFIG_BOARD_EARLY_INIT_F |#define CONFIG_BOARD_EARLY_INIT_R
I would prefer this solution over removing all the board support for AVR32 targets in U-Boot.
Sadly, I do not have the time to work with AVR32 in U-Boot.
Quoted 19 lines
The patch 'avr32: delete non generic board favr-32-ezkit' has an checkpatch warning which will not be fixed.
---8<---
0 errors, 1 warnings, 0 checks for 0002-avr32-delete-non-generic-board-favr-32-ezkit.patch:
warning:arch/avr32/Kconfig,22: please write a paragraph that describes the config symbol fully --->8---The patch 'avr32: delete non generic board's atstk100{3,4,6}' has a checkpatch warning wich will not be fixed.
---8<---
0 errors, 1 warnings, 0 checks for 0005-avr32-delete-non-generic-board-s-atstk100-3-4-6.patch:
warning:arch/avr32/Kconfig,13: please write a paragraph that describes the config symbol fully --->8---
Quoted 8 lines
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.c
If one were to prioritize, then keeping the atngw100 board would be great.
If the arch/avr32/lib/board.c is a redundant implementation of the generic board.c file, then I am all for removing it and move to using the generic implementation.
<snipp stats>
Signature · 1 line
Hans-Christian Egtvedt
cover avr32: remove non-generic boards
Hi Hans-Christian,
Quoted 6 lines · Hans-Christian Egtvedt
Quoted 5 lines · Andreas Bie?mann
This series deletes avr32-boards that are still using the ancient
arch/avr32/lib/board.ccode. If one would like his board to stay in u-boot there is a last chance to convert it to generic board _now_. It should be as easy as defining these three values in the board config:
Quoted 7 lines
Quoted 4 lines
|/* generic board */ |#define CONFIG_SYS_GENERIC_BOARD |#define CONFIG_BOARD_EARLY_INIT_F |#define CONFIG_BOARD_EARLY_INIT_RI would prefer this solution over removing all the board support for AVR32 targets in U-Boot.
Me too ...
Quoted 1 line
Sadly, I do not have the time to work with AVR32 in U-Boot.
... but I'd prefer to run-time test this change on a real hardware. Unfortunately I do not own any of the removed ones.
<snip>
Quoted 10 lines
Quoted 8 lines
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.cIf one were to prioritize, then keeping the atngw100 board would be great.
+1, but as said above, I want a run-time test and can't do it for my own. Waldemar talked to me lately to get his ngw100 up running current u-boot (2015.01 I think). So Waldemar, could you please do a runtime test for atngw100 and required adoptions? Or anyone else?
Andreas
cover avr32: remove non-generic boards
Hi,
Andreas Bie?mann wrote,
Quoted 35 lines
Hi Hans-Christian,
Quoted 6 lines · Hans-Christian Egtvedt
Quoted 5 lines · Andreas Bie?mann
This series deletes avr32-boards that are still using the ancient
arch/avr32/lib/board.ccode. If one would like his board to stay in u-boot there is a last chance to convert it to generic board _now_. It should be as easy as defining these three values in the board config:Quoted 7 lines
Quoted 4 lines
|/* generic board */ |#define CONFIG_SYS_GENERIC_BOARD |#define CONFIG_BOARD_EARLY_INIT_F |#define CONFIG_BOARD_EARLY_INIT_RI would prefer this solution over removing all the board support for AVR32 targets in U-Boot.
Me too ...
Quoted 1 line
Sadly, I do not have the time to work with AVR32 in U-Boot.
... but I'd prefer to run-time test this change on a real hardware. Unfortunately I do not own any of the removed ones.
<snip>
Quoted 9 lines
Quoted 8 lines
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.c
Quoted 6 lines
Quoted 1 line
If one were to prioritize, then keeping the atngw100 board would be great.
+1, but as said above, I want a run-time test and can't do it for my own. Waldemar talked to me lately to get his ngw100 up running current u-boot (2015.01 I think). So Waldemar, could you please do a runtime test for atngw100 and required adoptions? Or anyone else?
I can try a runtime test tommorow. I even now have two devices. Last time 2015.01 worked, but git with your changes does not. I have'nt got the time to debug it via JTAG or GDB and I think my knowledge about the u-boot internals are too bad.
What if I sent you my spare board?
Better one board with good support, then two with no support.
best regards
Waldemar
cover avr32: remove non-generic boards
Hi Waldemar,
Quoted 16 lines · Waldemar Brodkorb
Quoted 9 lines
Quoted 9 lines
Quoted 8 lines
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.cQuoted 6 lines
Quoted 1 line
If one were to prioritize, then keeping the atngw100 board would be great.
+1, but as said above, I want a run-time test and can't do it for my own. Waldemar talked to me lately to get his ngw100 up running current u-boot (2015.01 I think). So Waldemar, could you please do a runtime test for atngw100 and required adoptions? Or anyone else?
Quoted 6 lines
I can try a runtime test tommorow. I even now have two devices. Last time 2015.01 worked, but git with your changes does not. I have'nt got the time to debug it via JTAG or GDB and I think my knowledge about the u-boot internals are too bad.
What if I sent you my spare board?
would be an option, if no one else can run the test successfully.
Andreas
cover avr32: remove non-generic boards
In reply to Waldemar BrodkorbHi Waldemar,
Quoted 17 lines · Waldemar Brodkorb
Hi,
Andreas Bie?mann wrote,Quoted 14 lines
Hi Hans-Christian,
Quoted 11 lines · Hans-Christian Egtvedt
Quoted 8 lines · Andreas Bie?mann
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.c
Quoted 8 lines
Quoted 6 lines
Quoted 1 line
If one were to prioritize, then keeping the atngw100 board would be great.
+1, but as said above, I want a run-time test and can't do it for my own. Waldemar talked to me lately to get his ngw100 up running current u-boot (2015.01 I think). So Waldemar, could you please do a runtime test for atngw100 and required adoptions? Or anyone else?
I can try a runtime test tommorow.
any progress? Could you run the test and was it (un)successful?
Andreas
cover avr32: remove non-generic boards
Hi Andreas,
Andreas Bie?mann wrote,
Quoted 22 lines
Hi Waldemar,
Quoted 19 lines · Waldemar Brodkorb
Hi,
Andreas Bie?mann wrote,Quoted 16 lines
Hi Hans-Christian,
Quoted 12 lines · Hans-Christian Egtvedt
Quoted 8 lines · Andreas Bie?mann
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.cIf one were to prioritize, then keeping the atngw100 board would be great.
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
+1, but as said above, I want a run-time test and can't do it for my own. Waldemar talked to me lately to get his ngw100 up running current u-boot (2015.01 I think). So Waldemar, could you please do a runtime test for atngw100 and required adoptions? Or anyone else?
I can try a runtime test tommorow.
any progress? Could you run the test and was it (un)successful?
Got some time today to test.
2015.01 works fine!
git master works fine!
git master with the three line patch added to convert to generic board support _does not work_!
No ouput on serial console.
best regards
Waldemar
cover avr32: remove non-generic boards
Hi Waldemar,
Quoted 32 lines · Waldemar Brodkorb
Hi Andreas,
Andreas Bie?mann wrote,Quoted 29 lines
Hi Waldemar,
Quoted 25 lines · Waldemar Brodkorb
Hi,
Andreas Bie?mann wrote,Quoted 14 lines
Hi Hans-Christian,
Quoted 11 lines · Hans-Christian Egtvedt
Quoted 8 lines · Andreas Bie?mann
Andreas Bie?mann (7):
avr32: delete non generic board atngw100
avr32: delete non generic board favr-32-ezkit
avr32: delete non generic board hammerhead
avr32: delete non generic board mimc200
avr32: delete non generic board's atstk100{3,4,6}
avr32: take maintainership for atstk1002
avr32: delete ancientboard.cQuoted 6 lines
Quoted 1 line
If one were to prioritize, then keeping the atngw100 board would be great.
+1, but as said above, I want a run-time test and can't do it for my own. Waldemar talked to me lately to get his ngw100 up running current u-boot (2015.01 I think). So Waldemar, could you please do a runtime test for atngw100 and required adoptions? Or anyone else?
I can try a runtime test tommorow.
Quoted 7 lines
Quoted 1 line
any progress? Could you run the test and was it (un)successful?
Got some time today to test.
2015.01 works fine!
git master works fine!
git master with the three line patch added to convert to generic board support_doesnotwork_!
Ok, can you debug it? Or will you provide me one of your boards for generic board support adoption?
Andreas