Skip to contentSkip to conversation

regulator: Add docbook for soft start

PATCH In review Stephen Boyd 2 participants 2 messages Jun 12, 2015 – Jun 15, 2015

Subsystems (2)
Arm Qualcomm mailing list Voltage and current regulator framework
lore
Share & tools
lore

Stephen Boyd

author
#0 lore raw

PATCH 1/1 regulator: Add docbook for soft start

The docbook for these members is missing. Add them.

Warning(include/linux/regulator/machine.h:147): No description found for parameter 'soft_start' Warning(include/linux/regulator/driver.h:197): No description found for parameter 'set_soft_start'

Reported-by kbuild test robot <[email protected]>
Signed-off-by Stephen Boyd <[email protected]>
---
 include/linux/regulator/driver.h  | 1 +
 include/linux/regulator/machine.h | 1 +
 2 files changed, 2 insertions(+)
include/linux/regulator/driver.h +1 -0
index 125264f8be93..4db9fbe4889d 100644
@@ -112,6 +112,7 @@ struct regulator_linear_range {
  *               to stabilise after being set to a new value, in microseconds.
  *               The function provides the from and to voltage selector, the
  *               function should return the worst case.
+ * @set_soft_start: Enable soft start for the regulator.
  *
  * @set_suspend_voltage: Set the voltage for the regulator when the system
  *                       is suspended.
include/linux/regulator/machine.h +1 -0
index 85a3b457de51..b11be1260129 100644
@@ -88,6 +88,7 @@ struct regulator_state {
  *           applied.
  * @apply_uV: Apply the voltage constraint when initialising.
  * @ramp_disable: Disable ramp delay when initialising or when setting voltage.
+ * @soft_start: Enable soft start so that voltage ramps slowly.
  * @pull_down: Enable pull down when regulator is disabled.
  *
  * @input_uV: Input voltage for regulator when supplied by another regulator.
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
maintainer
#1 lore raw
Quoted 6 lines · Stephen Boyd

The docbook for these members is missing. Add them.

Warning(include/linux/regulator/machine.h:147): No description found for parameter 'soft_start' Warning(include/linux/regulator/driver.h:197): No description found for parameter 'set_soft_start'

Applied, thanks.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 473 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150615/28e25f7a/attachment.sig>