Skip to contentSkip to conversation

ASoC: ml26124: Remove duplicate code

PATCH Applied Axel Lin 2 participants 2 messages Jun 14, 2015 – Jun 15, 2015

Subsystems (2)
Sound ASoC
lore
Share & tools
lore

Axel Lin

author
#0 lore raw

PATCH 1/1 ASoC: ml26124: Remove duplicate code

Current code has duplicate code for 16000, 32000 and 48000 sample rates. get_srate() returns negative error code for unsupported rate, so we can remove the duplicate code in the swith cases by calling get_srate() first.

Signed-off-by Axel Lin <[email protected]>
---
 sound/soc/codecs/ml26124.c | 58 +++++++++-------------------------------------
 1 file changed, 11 insertions(+), 47 deletions(-)
sound/soc/codecs/ml26124.c +11 -47
index 62dda24..b74118e 100644
@@ -341,6 +341,7 @@ static int ml26124_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = dai->codec;
 	struct ml26124_priv *priv = snd_soc_codec_get_drvdata(codec);
 	int i = get_coeff(priv->mclk, params_rate(hw_params));
+	int srate;
 
 	if (i < 0)
 		return i;

@@ -370,53 +371,16 @@ static int ml26124_hw_params(struct snd_pcm_substream *substream,
 				    BIT(0) | BIT(1), 0);
 	}
 
-	switch (params_rate(hw_params)) {
-	case 16000:
-		snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf,
-				    get_srate(params_rate(hw_params)));
-		snd_soc_update_bits(codec, ML26124_PLLNL, 0xff,
-				    coeff_div[i].pllnl);
-		snd_soc_update_bits(codec, ML26124_PLLNH, 0x1,
-				    coeff_div[i].pllnh);
-		snd_soc_update_bits(codec, ML26124_PLLML, 0xff,
-				    coeff_div[i].pllml);
-		snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f,
-				    coeff_div[i].pllmh);
-		snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f,
-				    coeff_div[i].plldiv);
-		break;
-	case 32000:
-		snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf,
-				    get_srate(params_rate(hw_params)));
-		snd_soc_update_bits(codec, ML26124_PLLNL, 0xff,
-				    coeff_div[i].pllnl);
-		snd_soc_update_bits(codec, ML26124_PLLNH, 0x1,
-				    coeff_div[i].pllnh);
-		snd_soc_update_bits(codec, ML26124_PLLML, 0xff,
-				    coeff_div[i].pllml);
-		snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f,
-				    coeff_div[i].pllmh);
-		snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f,
-				    coeff_div[i].plldiv);
-		break;
-	case 48000:
-		snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf,
-				    get_srate(params_rate(hw_params)));
-		snd_soc_update_bits(codec, ML26124_PLLNL, 0xff,
-				    coeff_div[i].pllnl);
-		snd_soc_update_bits(codec, ML26124_PLLNH, 0x1,
-				    coeff_div[i].pllnh);
-		snd_soc_update_bits(codec, ML26124_PLLML, 0xff,
-				    coeff_div[i].pllml);
-		snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f,
-				    coeff_div[i].pllmh);
-		snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f,
-				    coeff_div[i].plldiv);
-		break;
-	default:
-		pr_err("%s:this rate is no support for ml26124\n", __func__);
-		return -EINVAL;
-	}
+	srate = get_srate(params_rate(hw_params));
+	if (srate < 0)
+		return srate;
+
+	snd_soc_update_bits(codec, ML26124_SMPLING_RATE, 0xf, srate);
+	snd_soc_update_bits(codec, ML26124_PLLNL, 0xff, coeff_div[i].pllnl);
+	snd_soc_update_bits(codec, ML26124_PLLNH, 0x1, coeff_div[i].pllnh);
+	snd_soc_update_bits(codec, ML26124_PLLML, 0xff, coeff_div[i].pllml);
+	snd_soc_update_bits(codec, ML26124_PLLMH, 0x3f, coeff_div[i].pllmh);
+	snd_soc_update_bits(codec, ML26124_PLLDIV, 0x1f, coeff_div[i].plldiv);
 
 	return 0;
 }
Signature · 1 line
2.1.0
maintainer Applied
#1 lore raw
Quoted 3 lines · Axel Lin

Current code has duplicate code for 16000, 32000 and 48000 sample rates. get_srate() returns negative error code for unsupported rate, so we can remove the duplicate code in the swith cases by calling get_srate() first.

Applied, thanks.