Skip to contentSkip to conversation

usb: core: lpm: set lpm_capable for root hub device

PATCH Superseded Lu Baolu 2 participants 2 messages Jun 15, 2015 USB

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Lu Baolu

author
#0 lore raw

PATCH v3 1/1 usb: core: lpm: set lpm_capable for root hub device

Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed root hub. The intention of that change was to avoid touching usb core internal field, a.k.a. lpm_capable, and let usb core to set it by checking U1 and U2 exit latency values in the descriptor.

Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately, root hub is a special usb device as it has no parent. Hub_port_init() will never be called for a root hub device. That means lpm_capable will by no means be set for the root hub. As the result, lpm isn't functional at all in Linux kernel.

This patch add the code to check and set lpm_capable when registering a root hub device. It could be back-ported to kernels as old as v3.15, that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.").

---
 drivers/usb/core/hcd.c | 7 +++++--
 drivers/usb/core/hub.c | 2 +-
 drivers/usb/core/usb.h | 1 +
 3 files changed, 7 insertions(+), 3 deletions(-)

v1->v2 change log:
1. two code blocks merged
2. fix build error when CONFIG_PM is not set
v2->v3 change log:
1. further fix of build error when CONFIG_PM is not set

drivers/usb/core/hcd.c +5 -2
index 45a915c..1c1385e 100644
@@ -1022,9 +1022,12 @@ static int register_root_hub(struct usb_hcd *hcd)
 				dev_name(&usb_dev->dev), retval);
 		return (retval < 0) ? retval : -EMSGSIZE;
 	}
-	if (usb_dev->speed == USB_SPEED_SUPER) {
+
+	if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
 		retval = usb_get_bos_descriptor(usb_dev);
-		if (retval < 0) {
+		if (!retval) {
+			usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
+		} else if (usb_dev->speed == USB_SPEED_SUPER) {
 			mutex_unlock(&usb_bus_list_lock);
 			dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
 					dev_name(&usb_dev->dev), retval);
drivers/usb/core/hub.c +1 -1
index 3b71516..884d702 100644
@@ -122,7 +122,7 @@ struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev)
 	return usb_get_intfdata(hdev->actconfig->interface[0]);
 }
 
-static int usb_device_supports_lpm(struct usb_device *udev)
+int usb_device_supports_lpm(struct usb_device *udev)
 {
 	/* USB 2.1 (and greater) devices indicate LPM support through
 	 * their USB 2.0 Extended Capabilities BOS descriptor.
drivers/usb/core/usb.h +1 -0
index 7eb1e26..457255a 100644
@@ -65,6 +65,7 @@ extern int  usb_hub_init(void);
 extern void usb_hub_cleanup(void);
 extern int usb_major_init(void);
 extern void usb_major_cleanup(void);
+extern int usb_device_supports_lpm(struct usb_device *udev);
 
 #ifdef	CONFIG_PM
 
Signature · 1 line
2.1.4
Acked-by on v3 1/1
#1 lore raw
Quoted 12 lines · Lu Baolu

Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed root hub. The intention of that change was to avoid touching usb core internal field, a.k.a. lpm_capable, and let usb core to set it by checking U1 and U2 exit latency values in the descriptor.

Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately, root hub is a special usb device as it has no parent. Hub_port_init() will never be called for a root hub device. That means lpm_capable will by no means be set for the root hub. As the result, lpm isn't functional at all in Linux kernel.

Quoted 8 lines

This patch add the code to check and set lpm_capable when registering a root hub device. It could be back-ported to kernels as old as v3.15, that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.").