Skip to contentSkip to conversation

output stutters

DISCUSSION Brian J. Murrell 2 participants 4 messages Jun 7, 2015 – Jun 17, 2015

lore
Share & tools
lore
#0 lore raw

I have an:

00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)

in a Fedora 21 machine running Linux 4.0.4.

While this is all generally working, the display has pauses where there should be fluid motion. Watching a video with mplayer for example, plays about a second or so, then pauses for .25 to .5 (just a guess) of a second and then continues playing. glxgears does the same thing. While it's reporting ~60fps the gears turn then stop then turn then stop.

I see the same thing dragging windows across the screen or even just scrolling (GTK3) application windows.

I'm using both the DVI and the VGA output of this card, FWIW.

What additional information can I provide to help diagnose this problem?

Cheers,
b.

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#1 lore raw
Quoted 13 lines · Brian J. Murrell

I have an:

00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)

in a Fedora 21 machine running Linux 4.0.4.

While this is all generally working, the display has pauses where there should be fluid motion. Watching a video with mplayer for example, plays about a second or so, then pauses for .25 to .5 (just a guess) of a second and then continues playing. glxgears does the same thing. While it's reporting ~60fps the gears turn then stop then turn then stop.

Quoted 6 lines

I see the same thing dragging windows across the screen or even just scrolling (GTK3) application windows.

I'm using both the DVI and the VGA output of this card, FWIW.

What additional information can I provide to help diagnose this problem?

Is there anything I can do to help debug what this issue is?

The pauses translate into sponginess and latencies that make using this display very unpleasant. :-(

b.

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

#2 lore raw
Quoted 17 lines · Brian J. Murrell
Quoted 16 lines · Brian J. Murrell

I have an:

00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)

in a Fedora 21 machine running Linux 4.0.4.

While this is all generally working, the display has pauses where there should be fluid motion. Watching a video with mplayer for example, plays about a second or so, then pauses for .25 to .5 (just a guess) of a second and then continues playing. glxgears does the same thing. While it's reporting ~60fps the gears turn then stop then turn then stop.

I see the same thing dragging windows across the screen or even just scrolling (GTK3) application windows.

Quoted 8 lines
Quoted 3 lines

I'm using both the DVI and the VGA output of this card, FWIW.

What additional information can I provide to help diagnose this problem?

Is there anything I can do to help debug what this issue is?

The pauses translate into sponginess and latencies that make using this display very unpleasant. :-(

sudo perf record -g -a -c 1 -e i915:i915_gem_request_wait_begin is likely to capture the culprit. Though to be precise you need to look at wait_begin + wait_end to measure the stall (some waits are more harmless than others). As a first approximation just using perf will be good enough to get a few leads.
-Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw
Quoted 6 lines · Chris Wilson

sudo perf record -g -a -c 1 -e i915:i915_gem_request_wait_begin is likely to capture the culprit. Though to be precise you need to look at wait_begin + wait_end to measure the stall (some waits are more harmless than others). As a first approximation just using perf will be good enough to get a few leads.

Thanks Chris. But I no sooner posted that and a reboot later the problem went away and has not come back since. Good or bad depending on your perspective I suppose.

Thanks for the response and suggestions though. Much appreciated.

Cheers,
b.

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx