Add basic microphone detection bindings
Subsystems (4)
v3 cover Add basic microphone detection bindings
This series adds basic microphone detection DT/ACPI bindings using the device properties API.
The MFD parts and the extcon parts can go seperately through there respective trees, but I sent them together so everyone can see what is going on. There is no build dependency although the MFD patch will fix a couple of Sparse warnings that you get if using -Wsparse-all.
Changes since v1:
- Removed double include of property.h
Changes since v2:
- Removed check for CONFIG_OF to call arizona_extcon_device_get_pdata.
- Add some defines for the pdata values of micd-dbtime.
- Factor out the initial gpio level for the micd-pol-gpio.
- Don't check if null before calling gpiod_set_value_cansleep.
- Added a comment to explain why we can't use devm for gpiod.
- Added patch to make some small corrections to the jack detection into this series to keep them all together for easy of applying.
Thanks,
Charles
Charles Keepax (7):
extcon: arizona: Factor out initial GPIO state
extcon: arizona: Update to use the new device properties API
extcon: arizona: Add basic microphone detection DT/ACPI bindings
extcon: arizona: Convert to gpiod
extcon: arizona: Ensure variables are set for headphone detection
mfd: arizona: Update DT doc for new mic detection bindings
mfd: arizona: Update several pdata members to unsigned
Documentation/devicetree/bindings/mfd/arizona.txt | 16 ++++ drivers/extcon/extcon-arizona.c | 97 +++++++++++++++++---- include/linux/mfd/arizona/pdata.h | 15 ++-- 3 files changed, 106 insertions(+), 22 deletions(-)
Signature · 1 line
1.7.2.5
PATCH v3 1/7 extcon: arizona: Factor out initial GPIO state
--- drivers/extcon/extcon-arizona.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
drivers/extcon/extcon-arizona.c +3 -1
@@ -1135,6 +1135,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)struct arizona *arizona =dev_get_drvdata (pdev->dev.parent);struct arizona_pdata *pdata = &arizona->pdata;struct arizona_extcon_info *info; +int gpio_initial_level;unsigned int val;unsigned int clamp_mode;int jack_irq_fall, jack_irq_rise;
@@ -1226,8 +1227,9 @@ static int arizona_extcon_probe(struct platform_device *pdev) info->micd_num_modes =ARRAY_SIZE (micd_default_modes); } + gpio_initial_level = info->micd_modes[0 ].gpio;if (arizona->pdata.micd_pol_gpio >0 ) { -if (info->micd_modes[0 ].gpio) +if (gpio_initial_level) mode =GPIOF_OUT_INIT_HIGH ;else mode =GPIOF_OUT_INIT_LOW ;
Signature · 1 line
1.7.2.5
Re: [PATCH v3 1/7] extcon: arizona: Factor out initial GPIO state
Hi Charles,
I'm sorry about lack of my commet on previous patch. I just want to know the what is meaning of zero(0) index of "info->micd_modes[0] array"
instead of separate variable (gpio_initial_level).
So, I'd like you to drop this patch on next your patch-set.
Thanks,
Chanwoo Choi
Quoted 31 lines · Charles Keepax
Signed-off-by Charles Keepax <[email protected]>--- drivers/extcon/extcon-arizona.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)drivers/extcon/extcon-arizona.c +3
-2@@ -1135,6 +1135,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)struct arizona *arizona =dev_get_drvdata (pdev->dev.parent);struct arizona_pdata *pdata = &arizona->pdata;struct arizona_extcon_info *info; +int gpio_initial_level;unsigned int val;unsigned int clamp_mode;int jack_irq_fall, jack_irq_rise;@@ -1226,8 +1227,9 @@ static int arizona_extcon_probe(struct platform_device *pdev) info->micd_num_modes =ARRAY_SIZE (micd_default_modes); } + gpio_initial_level = info->micd_modes[0 ].gpio;if (arizona->pdata.micd_pol_gpio >0 ) { -if (info->micd_modes[0 ].gpio) +if (gpio_initial_level) mode =GPIOF_OUT_INIT_HIGH ;else mode =GPIOF_OUT_INIT_LOW ; --1.7.2.5
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/
Re: [PATCH v3 1/7] extcon: arizona: Factor out initial GPIO state
Quoted 7 lines · Chanwoo Choi
Hi Charles,
I'm sorry about lack of my commet on previous patch. I just want to know the what is meaning of zero(0) index of "info->micd_modes[0] array"
instead of separate variable (gpio_initial_level).
Quoted 5 lines
So, I'd like you to drop this patch on next your patch-set.
Thanks,
Chanwoo Choi
:-) And I just spotted this after sending the next version. I will send another version.
Thanks,
Charles
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/
PATCH v3 2/7 extcon: arizona: Update to use the new device properties API
In reply to Charles KeepaxThe device properties API will load data from both device tree and ACPI, update the binding to use this API instead of the OF API.
--- drivers/extcon/extcon-arizona.c | 11 +++++------ 1 files changed, 5 insertions(+), 6 deletions(-)
drivers/extcon/extcon-arizona.c +5 -6
@@ -24,6 +24,7 @@#include <linux/input.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/regulator/consumer.h> #include <linux/extcon.h>
@@ -1110,12 +1111,12 @@ static void arizona_micd_set_level(struct arizona *arizona, int index,regmap_update_bits (arizona->regmap, reg, mask, level); } -static int arizona_extcon_of_get_pdata (struct arizona *arizona) +static int arizona_extcon_device_get_pdata (struct arizona *arizona) {struct arizona_pdata *pdata = &arizona->pdata;unsigned int val =ARIZONA_ACCDET_MODE_HPL ; -of_property_read_u32 (arizona->dev->of_node,"wlf,hpdet-channel" , &val); +device_property_read_u32 (arizona->dev,"wlf,hpdet-channel" , &val);switch (val) {case ARIZONA_ACCDET_MODE_HPL :case ARIZONA_ACCDET_MODE_HPR :
@@ -1148,10 +1149,8 @@ static int arizona_extcon_probe(struct platform_device *pdev)if (!info)return -ENOMEM ; -if (IS_ENABLED (CONFIG_OF )) { -if (!dev_get_platdata (arizona->dev)) -arizona_extcon_of_get_pdata (arizona); - } +if (!dev_get_platdata (arizona->dev)) +arizona_extcon_device_get_pdata (arizona); info->micvdd =devm_regulator_get (&pdev->dev,"MICVDD" );if (IS_ERR (info->micvdd)) {
Signature · 1 line
1.7.2.5
PATCH v3 3/7 extcon: arizona: Add basic microphone detection DT/ACPI bindings
In reply to Charles KeepaxThis patch adds bindings for the basic microphone detection platform data.
--- drivers/extcon/extcon-arizona.c | 30 ++++++++++++++++++++++++++++++ include/linux/mfd/arizona/pdata.h | 3 +++ 2 files changed, 33 insertions(+), 0 deletions(-)
drivers/extcon/extcon-arizona.c +30 -0
@@ -1115,6 +1115,7 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) {struct arizona_pdata *pdata = &arizona->pdata;unsigned int val =ARIZONA_ACCDET_MODE_HPL ; +unsigned int num_debounces;device_property_read_u32 (arizona->dev,"wlf,hpdet-channel" , &val);switch (val) {
@@ -1128,6 +1129,35 @@ static int arizona_extcon_device_get_pdata(struct arizona *arizona) pdata->hpdet_channel =ARIZONA_ACCDET_MODE_HPL ; } +device_property_read_u32 (arizona->dev,"wlf,micd-detect-debounce" , + &pdata->micd_detect_debounce); + +device_property_read_u32 (arizona->dev,"wlf,micd-bias-start-time" , + &pdata->micd_bias_start_time); + +device_property_read_u32 (arizona->dev,"wlf,micd-rate" , + &pdata->micd_rate); + + num_debounces =0 ; +device_property_read_u32 (arizona->dev,"wlf,micd-dbtime" , + &num_debounces); +switch (num_debounces) { +case 2 : + pdata->micd_dbtime =ARIZONA_MICD_DBTIME_TWO_DEBOUNCES ; +break ; +case 4 : + pdata->micd_dbtime =ARIZONA_MICD_DBTIME_FOUR_DEBOUNCES ; +break ; +default : +break ; + } + +device_property_read_u32 (arizona->dev,"wlf,micd-timeout" , + &pdata->micd_timeout); + + pdata->micd_force_micbias =device_property_read_bool (arizona->dev, +"wlf,micd-force-micbias" ); +return 0 ; }
include/linux/mfd/arizona/pdata.h +3 -0
@@ -53,6 +53,9 @@#define ARIZONA_MAX_PDM_SPK 2 +#define ARIZONA_MICD_DBTIME_TWO_DEBOUNCES 0x10000 +#define ARIZONA_MICD_DBTIME_FOUR_DEBOUNCES 0x0001 +struct regulator_init_data ;struct arizona_micbias {
Signature · 1 line
1.7.2.5
PATCH v3 4/7 extcon: arizona: Convert to gpiod
In reply to Charles KeepaxConvert to using the newer gpiod interface for the micd_pol_gpio. Although we still carry support for the old gpio interface from pdata.
--- drivers/extcon/extcon-arizona.c | 41 ++++++++++++++++++++++++++++++++++---- 1 files changed, 36 insertions(+), 5 deletions(-)
drivers/extcon/extcon-arizona.c +36 -5
@@ -20,6 +20,7 @@#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/err.h> +#include <linux/gpio/consumer.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/platform_device.h>
@@ -95,6 +96,8 @@ struct arizona_extcon_info {int hpdet_ip_version;struct extcon_dev *edev; + +struct gpio_desc *micd_pol_gpio; };static const struct arizona_micd_config micd_default_modes[] = {
@@ -205,6 +208,10 @@ static void arizona_extcon_set_mode(struct arizona_extcon_info *info, int mode)if (arizona->pdata.micd_pol_gpio >0 )gpio_set_value_cansleep (arizona->pdata.micd_pol_gpio, info->micd_modes[mode].gpio); +else +gpiod_set_value_cansleep (info->micd_pol_gpio, + info->micd_modes[mode].gpio); + regmap_update_bits(arizona->regmap, ARIZONA_MIC_DETECT_1, ARIZONA_MICD_BIAS_SRC_MASK, info->micd_modes[mode].bias <<
@@ -1272,6 +1279,27 @@ static int arizona_extcon_probe(struct platform_device *pdev) arizona->pdata.micd_pol_gpio, ret); goto err_register; } + }else { +if (gpio_initial_level) + mode =GPIOD_OUT_HIGH ; +else + mode =GPIOD_OUT_LOW ; + +/* We can't use devm here because we need to do the get +* against the MFD device, as that is where the of_node +* will reside, but if we devm against that the GPIO +* will not be freed if the extcon driver is unloaded. +*/ + info->micd_pol_gpio =gpiod_get_optional (arizona->dev, +"wlf,micd-pol" , +GPIOD_OUT_LOW ); +if (IS_ERR (info->micd_pol_gpio)) { + ret =PTR_ERR (info->micd_pol_gpio); +dev_err (arizona->dev, +"Failed to get microphone polarity GPIO: %d\n" , + ret); + goto err_register; + } }if (arizona->pdata.hpdet_id_gpio >0 ) {
@@ -1282,7 +1310,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)if (ret !=0 ) {dev_err (arizona->dev,"Failed to request GPIO%d: %d\n" , arizona->pdata.hpdet_id_gpio, ret); - goto err_register; + goto err_gpio; } }
@@ -1326,7 +1354,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)dev_err (arizona->dev,"MICD ranges must be sorted\n" ); ret = -EINVAL ; - goto err_input; + goto err_gpio; } } }
@@ -1345,7 +1373,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)dev_err (arizona->dev,"Unsupported MICD level %d\n" , info->micd_ranges[i].max); ret = -EINVAL ; - goto err_input; + goto err_gpio; } dev_dbg(arizona->dev, "%d ohms for MICD threshold %d\n",
@@ -1418,7 +1446,7 @@ static int arizona_extcon_probe(struct platform_device *pdev)if (ret !=0 ) {dev_err (&pdev->dev,"Failed to get JACKDET rise IRQ: %d\n" , ret); - goto err_input; + goto err_gpio; } ret =arizona_set_irq_wake (arizona, jack_irq_rise,1 );
@@ -1489,7 +1517,8 @@ err_rise_wake:arizona_set_irq_wake (arizona, jack_irq_rise,0 ); err_rise:arizona_free_irq (arizona, jack_irq_rise, info); -err_input: +err_gpio: +gpiod_put (info->micd_pol_gpio); err_register:pm_runtime_disable (&pdev->dev);return ret;
@@ -1501,6 +1530,8 @@ static int arizona_extcon_remove(struct platform_device *pdev)struct arizona *arizona = info->arizona;int jack_irq_rise, jack_irq_fall; +gpiod_put (info->micd_pol_gpio); +pm_runtime_disable (&pdev->dev); regmap_update_bits(arizona->regmap,
Signature · 1 line
1.7.2.5
PATCH v3 5/7 extcon: arizona: Ensure variables are set for headphone detection
In reply to Charles KeepaxThe detecting flag really refers to the microphone detection stage and as such should be cleared before arizona_identify_headphones is called. Also the mic flag should be set before identify headphones is called as well.
Otherwise the microphone detection will not be disabled during the headphone detection and we can get false button reports caused by the clamping that is part of the headphone detection.
--- drivers/extcon/extcon-arizona.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-)
drivers/extcon/extcon-arizona.c +7 -4
@@ -765,10 +765,11 @@ static void arizona_micd_timeout_work(struct work_struct *work)mutex_lock (&info->lock);dev_dbg (info->arizona->dev,"MICD timed out, reporting HP\n" ); -arizona_identify_headphone (info); info->detecting = false; +arizona_identify_headphone (info); +arizona_stop_mic (info);mutex_unlock (&info->lock);
@@ -834,6 +835,9 @@ static void arizona_micd_detect(struct work_struct *work)/* If we got a high impedence we should have a headset, report it. */ if (info->detecting && (val &ARIZONA_MICD_LVL_8 )) { + info->mic = true; + info->detecting = false; +arizona_identify_headphone (info); ret = extcon_set_cable_state_(info->edev,
@@ -849,8 +853,6 @@ static void arizona_micd_detect(struct work_struct *work) ret); } - info->mic = true; - info->detecting = false; goto handled; }
@@ -863,10 +865,11 @@ static void arizona_micd_detect(struct work_struct *work)if (info->detecting && (val &MICD_LVL_1_TO_7 )) {if (info->jack_flips >= info->micd_num_modes *10 ) {dev_dbg (arizona->dev,"Detected HP/line\n" ); -arizona_identify_headphone (info); info->detecting = false; +arizona_identify_headphone (info); +arizona_stop_mic (info); }else { info->micd_mode++;
Signature · 1 line
1.7.2.5
PATCH v3 6/7 mfd: arizona: Update DT doc for new mic detection bindings
In reply to Charles Keepax--- Documentation/devicetree/bindings/mfd/arizona.txt | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)
Documentation/devicetree/bindings/mfd/arizona.txt +16 -0
@@ -68,6 +68,22 @@ Optional properties: If this node is not mentioned or if the value is unknown, then headphone detection mode is set to HPDETL. + - wlf,micd-detect-debounce : Additional software microphone detection + debounce specified in milliseconds. + - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset + polarity if one exists. + - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to + performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX + defines. + - wlf,micd-rate : Delay between successive microphone detection measurements, + specified as per the ARIZONA_MICD_TIME_XXX defines. + - wlf,micd-dbtime : Microphone detection hardware debounces specified as the + number of measurements to take, valid values being 2 and 4. + - wlf,micd-timeout : Timeout for microphone detection, specified in + milliseconds. + - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone + detection. + - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
Signature · 1 line
1.7.2.5
Re: [PATCH v3 6/7] mfd: arizona: Update DT doc for new mic detection bindings
This requires a DT Ack.
[... which would be pretty difficult, as you didn't Cc them]
Quoted 32 lines
Signed-off-by Charles Keepax <[email protected]>--- Documentation/devicetree/bindings/mfd/arizona.txt | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)Documentation/devicetree/bindings/mfd/arizona.txt +16
-0@@ -68,6 +68,22 @@ Optional properties: If this node is not mentioned or if the value is unknown, then headphone detection mode is set to HPDETL. + - wlf,micd-detect-debounce : Additional software microphone detection + debounce specified in milliseconds. + - wlf,micd-pol-gpio : GPIO specifier for the GPIO controlling the headset + polarity if one exists. + - wlf,micd-bias-start-time : Time allowed for MICBIAS to startup prior to + performing microphone detection, specified as per the ARIZONA_MICD_TIME_XXX + defines. + - wlf,micd-rate : Delay between successive microphone detection measurements, + specified as per the ARIZONA_MICD_TIME_XXX defines. + - wlf,micd-dbtime : Microphone detection hardware debounces specified as the + number of measurements to take, valid values being 2 and 4. + - wlf,micd-timeout : Timeout for microphone detection, specified in + milliseconds. + - wlf,micd-force-micbias : Force MICBIAS continuously on during microphone + detection. + - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Re: [PATCH v3 6/7] mfd: arizona: Update DT doc for new mic detection bindings
Quoted 4 lines · Lee Jones
This requires a DT Ack.
[... which would be pretty difficult, as you didn't Cc them]
I was under the impression that for fairly non-controversial bindings (which I really feel these are) that CCing the DT mailing list was considered sufficient. But I am more than happy to resend with more people on the CC if you prefer.
Thanks,
Charles
Re: [PATCH v3 6/7] mfd: arizona: Update DT doc for new mic detection bindings
Quoted 10 lines · Charles Keepax
Quoted 4 lines · Lee Jones
This requires a DT Ack.
[... which would be pretty difficult, as you didn't Cc them]
I was under the impression that for fairly non-controversial bindings (which I really feel these are) that CCing the DT mailing list was considered sufficient. But I am more than happy to resend with more people on the CC if you prefer.
I never Cc the Maintainers personally, as there are a lot of them. AFAIU Cc'ing the list is fine.
However ... you didn't do that either.
Signature · 8 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
PATCH v3 7/7 mfd: arizona: Update several pdata members to unsigned
In reply to Charles KeepaxDevice tree and ACPI primarily deal with unsigned ints, many of the pdata members in the Arizona driver are signed ints but are only ever assigned positive values. Changing these pdata fields to unsigned ints avoids us having to choose between overly verbose code and Sparse warnings.
--- include/linux/mfd/arizona/pdata.h | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
include/linux/mfd/arizona/pdata.h +6 -6
@@ -104,7 +104,7 @@ struct arizona_pdata {* useful for systems where and I2S bus with multiple data * lines is mastered. */ -int max_channels_clocked[ARIZONA_MAX_AIF ]; +unsigned int max_channels_clocked[ARIZONA_MAX_AIF ];/** GPIO5 is used for jack detection */ bool jd_gpio5;
@@ -128,22 +128,22 @@ struct arizona_pdata {unsigned int hpdet_channel;/** Extra debounce timeout used during initial mic detection (ms) */ -int micd_detect_debounce; +unsigned int micd_detect_debounce;/** GPIO for mic detection polarity */ int micd_pol_gpio;/** Mic detect ramp rate */ -int micd_bias_start_time; +unsigned int micd_bias_start_time;/** Mic detect sample rate */ -int micd_rate; +unsigned int micd_rate;/** Mic detect debounce level */ -int micd_dbtime; +unsigned int micd_dbtime;/** Mic detect timeout (ms) */ -int micd_timeout; +unsigned int micd_timeout;/** Force MICBIAS on for mic detect */ bool micd_force_micbias;
Signature · 1 line
1.7.2.5
Re: [PATCH v3 7/7] mfd: arizona: Update several pdata members to unsigned
Quoted 10 lines · Charles Keepax
Device tree and ACPI primarily deal with unsigned ints, many of the pdata members in the Arizona driver are signed ints but are only ever assigned positive values. Changing these pdata fields to unsigned ints avoids us having to choose between overly verbose code and Sparse warnings.
Signed-off-by Charles Keepax <[email protected]>--- include/linux/mfd/arizona/pdata.h | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
Applied for v4.3, thanks.
Quoted 41 lines
include/linux/mfd/arizona/pdata.h +6
-6@@ -104,7 +104,7 @@ struct arizona_pdata {* useful for systems where and I2S bus with multiple data * lines is mastered. */ -int max_channels_clocked[ARIZONA_MAX_AIF ]; +unsigned int max_channels_clocked[ARIZONA_MAX_AIF ];/** GPIO5 is used for jack detection */ bool jd_gpio5;@@ -128,22 +128,22 @@ struct arizona_pdata {unsigned int hpdet_channel;/** Extra debounce timeout used during initial mic detection (ms) */ -int micd_detect_debounce; +unsigned int micd_detect_debounce;/** GPIO for mic detection polarity */ int micd_pol_gpio;/** Mic detect ramp rate */ -int micd_bias_start_time; +unsigned int micd_bias_start_time;/** Mic detect sample rate */ -int micd_rate; +unsigned int micd_rate;/** Mic detect debounce level */ -int micd_dbtime; +unsigned int micd_dbtime;/** Mic detect timeout (ms) */ -int micd_timeout; +unsigned int micd_timeout;/** Force MICBIAS on for mic detect */ bool micd_force_micbias;
Signature · 4 lines
Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Quoted 23 lines · Charles Keepax
This series adds basic microphone detection DT/ACPI bindings using the device properties API.
The MFD parts and the extcon parts can go seperately through there respective trees, but I sent them together so everyone can see what is going on. There is no build dependency although the MFD patch will fix a couple of Sparse warnings that you get if using -Wsparse-all.
Changes since v1:
- Removed double include ofproperty.hChanges since v2:
- Removed check forCONFIG_OFto callarizona_extcon_device_get_pdata.
- Add some defines for the pdata values of micd-dbtime.
- Factor out the initial gpio level for the micd-pol-gpio.
- Don't check if null before callinggpiod_set_value_cansleep.
- Added a comment to explain why we can't use devm for gpiod.
- Added patch to make some small corrections to the jack detection into this series to keep them all together for easy of applying.
Quoted 2 lines
Thanks,
Charles
Ah sorry I totally forgot to CC the MFD guys on this going to resend.
Thanks,
Charles
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in Please read the FAQ at http://www.tux.org/lkml/