defconfig for warpboard

1/4

---
 configs/warpboard_defconfig | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 configs/warpboard_defconfig
new file mode 100644
index 0000000..188ea4d
@@ -0,0 +1,31 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y
+
+# system
+BR2_TARGET_GENERIC_HOSTNAME="warpboard"
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git at github.com:Freescale/linux-fslc.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="patches-4.0"
+BR2_LINUX_KERNEL_PATCH="board/freescale/warpboard/linux/"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/warpboard/linux-4.0.config"
+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sl-warp"
+
+# rootfs
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_TAR_BZIP2=y
+BR2_ROOTFS_OVERLAY="board/freescale/warpboard/rootfs_overlay"
+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_VERSION="2015.04"
+BR2_TARGET_UBOOT_BOARDNAME="warp"
+BR2_TARGET_UBOOT_FORMAT_IMX=y

1.9.1
---
 board/freescale/warpboard/README | 6 ++++++
 1 file changed, 6 insertions(+)
 create mode 100644 board/freescale/warpboard/README
new file mode 100644
index 0000000..0ec6b97
@@ -0,0 +1,6 @@
+# Enable bluetooth :
+hciattach /dev/ttymxc4 3wire
+hciconfig hci0 up
+
+# Enable Wifi :
+modprobe brcmfmac

1.9.1
---
 board/freescale/warpboard/linux-4.0.config         | 278 +++++++++++++++++++++
 .../linux/linux-001-add-sdm-firmware.patch         | 145 +++++++++++
 .../linux/linux-002-replace-uart2-by-uart5.patch   |  32 +++
 3 files changed, 455 insertions(+)
 create mode 100644 board/freescale/warpboard/linux-4.0.config
 create mode 100644 board/freescale/warpboard/linux/linux-001-add-sdm-firmware.patch
 create mode 100644 board/freescale/warpboard/linux/linux-002-replace-uart2-by-uart5.patch
new file mode 100644
index 0000000..4e47a3e
@@ -0,0 +1,278 @@
+CONFIG_KERNEL_LZO=y
+CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_RCU_FANOUT=32
+CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+# CONFIG_SGETMASK_SYSCALL is not set
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_SMP=y
+CONFIG_NR_CPUS=4
+# CONFIG_SCHED_MC is not set
+CONFIG_PREEMPT_VOLUNTARY=y
+CONFIG_CMA=y
+# CONFIG_SECCOMP is not set
+CONFIG_HZ_100=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_TEST_SUSPEND=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_NETFILTER=y
+CONFIG_CAN=y
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_RFKILL=y
+CONFIG_RFKILL_INPUT=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=16
+CONFIG_CONNECTOR=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_AT803X_PHY=y
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_BRCMFMAC=m
+CONFIG_INPUT_MATRIXKMAP=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_PS2_ELANTECH=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_MC13783=y
+CONFIG_TOUCHSCREEN_TSC2007=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MMA8450=y
+CONFIG_SERIO_SERPORT=m
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_FSL_LPUART=y
+CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C_COMPAT is not set
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_ALGOPCF=m
+CONFIG_I2C_ALGOPCA=m
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_RESET=y
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_MFD_DA9052_I2C=y
+CONFIG_MFD_MC13XXX_SPI=y
+CONFIG_MFD_MC13XXX_I2C=y
+CONFIG_MFD_SYSCON=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_ANATOP=y
+CONFIG_REGULATOR_DA9052=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_MC13783=y
+CONFIG_REGULATOR_MC13892=y
+CONFIG_REGULATOR_PFUZE100=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_DEVICES=y
+CONFIG_IR_GPIO_CIR=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=y
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_SOC_CAMERA_OV2640=y
+CONFIG_DRM=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_LCD_L4F00242T03=y
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_BACKLIGHT_GPIO=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_USB_AUDIO=m
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_FSL_SAI=y
+CONFIG_SND_SOC_FSL_SSI=y
+CONFIG_SND_SOC_FSL_SPDIF=y
+CONFIG_SND_SOC_IMX_AUDMUX=y
+CONFIG_SND_SOC_SGTL5000=y
+CONFIG_SND_SOC_TLV320AIC23_I2C=y
+CONFIG_SND_SOC_TLV320AIC3X=y
+CONFIG_SND_SOC_WM8962=y
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_SERIAL=m
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_EHSET_TEST_FIXTURE=m
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_ISL1208=y
+CONFIG_RTC_DRV_PCF8563=y
+# CONFIG_RTC_DRV_CMOS is not set
+CONFIG_RTC_DRV_MC13XXX=y
+CONFIG_DMADEVICES=y
+CONFIG_STAGING=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PWM=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_DEFAULT="cp437"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_PROVE_LOCKING=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_VIRTUALIZATION is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC7=m
+CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y

new file mode 100644
index 0000000..8216019
@@ -0,0 +1,32 @@
+--- linux-patches-4.0.old/arch/arm/boot/dts/imx6sl-warp.dts	2015-05-28 11:59:23.963079660 +0200
++++ linux-patches-4.0/arch/arm/boot/dts/imx6sl-warp.dts	2015-05-28 12:00:56.535075692 +0200
+@@ -73,9 +73,9 @@
+ 	status = "okay";
+ };
+ 
+-&uart2 {
++&uart5 {
+ 	pinctrl-names = "default";
+-	pinctrl-0 = <&pinctrl_uart2>;
++	pinctrl-0 = <&pinctrl_uart5>;
+ 	fsl,uart-has-rtscts;
+ 	status = "okay";
+ };
+@@ -170,12 +170,12 @@
+ 			>;
+ 		};
+ 
+-		pinctrl_uart2: uart2grp {
++		pinctrl_uart5: uart5grp {
+ 			fsl,pins = <
+-				MX6SL_PAD_EPDC_D12__UART2_RX_DATA	0x41b0b1
+-				MX6SL_PAD_EPDC_D13__UART2_TX_DATA	0x41b0b1
+-				MX6SL_PAD_EPDC_D14__UART2_RTS_B		0x4130B1
+-				MX6SL_PAD_EPDC_D15__UART2_CTS_B		0x4130B1
++				MX6SL_PAD_ECSPI1_SCLK__UART5_RX_DATA	0x41b0b1
++				MX6SL_PAD_ECSPI1_MOSI__UART5_TX_DATA	0x41b0b1
++				MX6SL_PAD_ECSPI1_SS0__UART5_CTS_B		0x4130B1
++				MX6SL_PAD_ECSPI1_MISO__UART5_RTS_B		0x4130B1
+ 			>;
+ 		};
+ 

1.9.1
---
 .../lib/firmware/brcm/brcmfmac4330-sdio.bin        | Bin 0 -> 222126 bytes
 .../lib/firmware/brcm/brcmfmac4330-sdio.txt        |  40 +++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.bin
 create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
new file mode 100644
index 0000000000000000000000000000000000000000..e3bc355467de633b9717ba1c2a7411ac4c4a8b6c
GIT binary patch

zml!Gx6+Xqt(fp|m)@V?hPF<hq=Sx!JpWnr-Q{1o?F5ZWK5)kIJC~cD3<IDSv&&_G~
z-fgNetka`cztI|0W5N0cK2s!)JYw4&v>Cp0<*wy2!Jtjd_NBiT?;z2mCI1qZAh@<)
zZRk2q{OoYQt;Q|PHdk`gaE_4Y!fL~|#z>sCw0_=@^KX2gz~OD|reiUZaeuV17Ckl#
z<1}xN@2NQ$f;(S9bsry$g^xc*Q|w1Tnj%(Iar^_0<8H0H=(xkv7SsL3Fi5|!80J_7
z4H&0!;vlmhN>bJaC9pe|*2b)3F|Im-B{<J!6QL(!Vy0T-sIfs(7_Q+HAssTx;~qY-
z!8yEzq(T~;;Vpr8ecLM$QX4S76|yS0dF|I&8dC;61cQh9-J+DW7Rls}B6DbRgyR`g
new file mode 100644
index 0000000..9546246
@@ -0,0 +1,40 @@
+# bcm94330wlsdgb.txt
+manfid=0x2d0
+prodid=0x0552
+vendid=0x14e4
+devid=0x4360
+boardtype=0x0552
+boardrev=0x11
+# this design has 2.4GHz SP3T switch
+boardflags=0x00080200
+nocrc=1
+xtalfreq=37400
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+ag0=255
+aa2g=1
+ccode=CN
+pa0b0=0x14d0
+pa0b1=0xfd98
+pa0b2=0xff78
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+maxp2ga0=0x50
+sromrev=3
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+cckPwrOffset=5
+ofdm2gpo=0x66666666
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+swctrlmap_2g=0x04040404,0x02020202,0x02020404,0x10202,0x1ff
+swctrlmap_5g=0x00100010,0x00280020,0x00200010,0x14202,0x2f8
+rfreg033=0x19
+rfreg033_cck=0x1f
+dacrate2g=160
+txalpfbyp2g=1
+bphyscale=17
+cckPwrIdxCorr=-15
+pacalidx2g=45
+txgaintbl=1

1.9.1
---
 .../lib/firmware/brcm/brcmfmac4330-sdio.bin        | Bin 0 -> 222126 bytes
 .../lib/firmware/brcm/brcmfmac4330-sdio.txt        |  40 +++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.bin
 create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
new file mode 100644
index 0000000000000000000000000000000000000000..e3bc355467de633b9717ba1c2a7411ac4c4a8b6c

new file mode 100644
index 0000000..9546246

@@ -0,0 +1,40 @@
+# bcm94330wlsdgb.txt
+manfid=0x2d0
+prodid=0x0552
+vendid=0x14e4
+devid=0x4360
+boardtype=0x0552
+boardrev=0x11
+# this design has 2.4GHz SP3T switch
+boardflags=0x00080200
+nocrc=1
+xtalfreq=37400
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+ag0=255
+aa2g=1
+ccode=CN
+pa0b0=0x14d0
+pa0b1=0xfd98
+pa0b2=0xff78
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+maxp2ga0=0x50
+sromrev=3
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+cckPwrOffset=5
+ofdm2gpo=0x66666666
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+swctrlmap_2g=0x04040404,0x02020202,0x02020404,0x10202,0x1ff
+swctrlmap_5g=0x00100010,0x00280020,0x00200010,0x14202,0x2f8
+rfreg033=0x19
+rfreg033_cck=0x1f
+dacrate2g=160
+txalpfbyp2g=1
+bphyscale=17
+cckPwrIdxCorr=-15
+pacalidx2g=45
+txgaintbl=1

1.9.1

_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
---
 .../lib/firmware/brcm/brcmfmac4330-sdio.bin        | Bin 0 -> 222126 bytes
 .../lib/firmware/brcm/brcmfmac4330-sdio.txt        |  40 +++++++++++++++++++++
 2 files changed, 40 insertions(+)
 create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.bin
 create mode 100644 board/freescale/warpboard/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt
new file mode 100644
index 0000000000000000000000000000000000000000..e3bc355467de633b9717ba1c2a7411ac4c4a8b6c

new file mode 100644
index 0000000..9546246

@@ -0,0 +1,40 @@
+# bcm94330wlsdgb.txt
+manfid=0x2d0
+prodid=0x0552
+vendid=0x14e4
+devid=0x4360
+boardtype=0x0552
+boardrev=0x11
+# this design has 2.4GHz SP3T switch
+boardflags=0x00080200
+nocrc=1
+xtalfreq=37400
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+ag0=255
+aa2g=1
+ccode=CN
+pa0b0=0x14d0
+pa0b1=0xfd98
+pa0b2=0xff78
+rssismf2g=0xa
+rssismc2g=0x3
+rssisav2g=0x7
+maxp2ga0=0x50
+sromrev=3
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+cckPwrOffset=5
+ofdm2gpo=0x66666666
+mcs2gpo0=0x6666
+mcs2gpo1=0x6666
+swctrlmap_2g=0x04040404,0x02020202,0x02020404,0x10202,0x1ff
+swctrlmap_5g=0x00100010,0x00280020,0x00200010,0x14202,0x2f8
+rfreg033=0x19
+rfreg033_cck=0x1f
+dacrate2g=160
+txalpfbyp2g=1
+bphyscale=17
+cckPwrIdxCorr=-15
+pacalidx2g=45
+txgaintbl=1
--

|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
new file mode 100644
index 0000000..9546246

.-----------------.--------------------.------------------.--------------------.
|  Yann E. MORIN  | Real-Time Embedded | /"\ ASCII RIBBON | Erics' conspiracy: |
| +33 662 376 056 | Software  Designer | \ / CAMPAIGN     |  ___               |
| +33 223 225 172 `------------.-------:  X  AGAINST      |  \e/  There is no  |
| http://ymorin.is-a-geek.org/ | _/*\_ | / \ HTML MAIL    |   v   conspiracy.  |
'------------------------------^-------^------------------^--------------------'
---
 configs/warpboard_defconfig | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 configs/warpboard_defconfig
new file mode 100644
index 0000000..188ea4d

@@ -0,0 +1,31 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y

+
+# system
+BR2_TARGET_GENERIC_HOSTNAME="warpboard"
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git at github.com:Freescale/linux-fslc.git"

+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="patches-4.0"

+BR2_LINUX_KERNEL_PATCH="board/freescale/warpboard/linux/"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/warpboard/linux-4.0.config"

+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sl-warp"
+
+# rootfs
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_TAR_BZIP2=y

+BR2_ROOTFS_OVERLAY="board/freescale/warpboard/rootfs_overlay"

+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_VERSION="2015.04"

+BR2_TARGET_UBOOT_BOARDNAME="warp"
+BR2_TARGET_UBOOT_FORMAT_IMX=y

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
---
 configs/warpboard_defconfig | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 configs/warpboard_defconfig
new file mode 100644
index 0000000..188ea4d
@@ -0,0 +1,31 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y

+
+# system
+BR2_TARGET_GENERIC_HOSTNAME="warpboard"
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git at github.com:Freescale/linux-fslc.git"

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
---
 configs/warpboard_defconfig | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)
 create mode 100644 configs/warpboard_defconfig
new file mode 100644
index 0000000..188ea4d
@@ -0,0 +1,31 @@
+# architecture
+BR2_arm=y
+BR2_cortex_a9=y

+
+# system
+BR2_TARGET_GENERIC_HOSTNAME="warpboard"
+BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
+
+# kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git at github.com:Freescale/linux-fslc.git"

+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="patches-4.0"

+BR2_LINUX_KERNEL_PATCH="board/freescale/warpboard/linux/"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/warpboard/linux-4.0.config"

+BR2_LINUX_KERNEL_ZIMAGE=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6sl-warp"
+
+# rootfs
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_TAR_BZIP2=y

+BR2_ROOTFS_OVERLAY="board/freescale/warpboard/rootfs_overlay"

+
+# bootloader
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_VERSION="2015.04"

+BR2_TARGET_UBOOT_BOARDNAME="warp"
+BR2_TARGET_UBOOT_FORMAT_IMX=y

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F
+BR2_LINUX_KERNEL_PATCH="board/freescale/warpboard/linux/"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/warpboard/linux-4.0.config"

Arnout Vandecappelle                          arnout at mind be
Senior Embedded Software Architect            +32-16-286500
Essensium/Mind                                http://www.mind.be
G.Geenslaan 9, 3001 Leuven, Belgium           BE 872 984 063 RPR Leuven
LinkedIn profile: http://www.linkedin.com/in/arnoutvandecappelle
GPG fingerprint:  7CB5 E4CC 6C2E EFD4 6E3D A754 F963 ECAB 2450 2F1F

defconfig for warpboard

Arthur LAMBERT

Arthur LAMBERT

Arthur LAMBERT

Arthur LAMBERT

Yann E. MORIN

Arthur LAMBERT

Yann E. MORIN

Arnout Vandecappelle

Arnout Vandecappelle

Arthur LAMBERT

Arnout Vandecappelle

Arnout Vandecappelle

Arthur LAMBERT

Arnout Vandecappelle