usb: gadget: pxa27x: depend on right symbol

PATCH Applied Lucas Stach 2 participants 5 messages Jun 25, 2015 – Jun 26, 2015

Subsystems (5)

Arm (32-bit) USB Arm sub-architectures PXA2xx/PXA3xx support +1 more subsystems

lore

Share & tools

lore

Lucas Stach

author

2015-06-25 18:30 UTC #0 lore raw

PATCH 1/4 usb: gadget: pxa27x: depend on right symbol

From: Lucas Stach <[email protected]>

Now that we also have PXA3XX support the dependency on ARCH_PXA is too broad for this driver.

Signed-off-by Lucas Stach <[email protected]>

---
v2:
- use ARCH_PXA27X symbol

---
 drivers/usb/gadget/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/usb/gadget/Kconfig +1 -1

index 5d9158f..13a3e70 100644
@@ -25,7 +25,7 @@ config USB_GADGET_DRIVER_AT91
 config USB_GADGET_DRIVER_PXA27X
 	bool
 	prompt "PXA27x gadget driver"
-	depends on ARCH_PXA
+	depends on ARCH_PXA27X
 	default y
 	select USB_GADGET_DUALSPEED

Signature · 7 lines

2.1.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Lucas Stach

author

2015-06-25 18:30 UTC #1 lore raw

PATCH 2/4 MCI: pxa: depend on right symbol

From: Lucas Stach <[email protected]>

Now that we also have PXA3XX support the dependency on ARCH_PXA is too broad for this driver.

Signed-off-by Lucas Stach <[email protected]>

Acked-by Robert Jarzmik <[email protected]>

---
 drivers/mci/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

drivers/mci/Kconfig +1 -1

index 31f7d2d..ebd8da9 100644
@@ -95,7 +95,7 @@ config MCI_OMAP_HSMMC
 
 config MCI_PXA
 	bool "PXA"
-	depends on ARCH_PXA
+	depends on ARCH_PXA2XX
 	help
 	  Enable this entry to add support to read and write SD cards on a
 	  XScale PXA25x / PXA27x based system.

Signature · 7 lines

2.1.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Lucas Stach

author

2015-06-25 18:30 UTC #2 lore raw

PATCH 3/4 ARM: socfpga: add default ARCH_TEXT_BASE

In reply to Lucas Stach

From: Lucas Stach <[email protected]>

As SoCFPGA is multi-image enabled there is no real reason to bother the user with asking for the text base. Fixes a bunch of randcfg failures.

Regenerate defconfig to drop the explicit config there, which unfortunately introduces quite a bit of churn.

Signed-off-by Lucas Stach <[email protected]>

---
 arch/arm/configs/socfpga_defconfig | 70 ++++++++++++++++++--------------------
 arch/arm/mach-socfpga/Kconfig      |  4 +++
 2 files changed, 38 insertions(+), 36 deletions(-)

arch/arm/configs/socfpga_defconfig +34 ~~-36~~

index ca54a1a..ec369ae 100644
@@ -1,70 +1,68 @@
 CONFIG_ARCH_SOCFPGA=y
-CONFIG_ARCH_SOCFPGA_FPGA=y
 CONFIG_MACH_SOCFPGA_EBV_SOCRATES=y
 CONFIG_MACH_SOCFPGA_TERASIC_SOCKIT=y
 CONFIG_THUMB2_BAREBOX=y
-CONFIG_CMD_ARM_MMUINFO=y
 CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
 CONFIG_MMU=y
-CONFIG_TEXT_BASE=0x0
 CONFIG_MALLOC_SIZE=0x0
 CONFIG_MALLOC_TLSF=y
 CONFIG_KALLSYMS=y
 CONFIG_RELOCATABLE=y
-CONFIG_LONGHELP=y
 CONFIG_HUSH_FANCY_PROMPT=y
 CONFIG_CMDLINE_EDITING=y
 CONFIG_AUTO_COMPLETE=y
 CONFIG_MENU=y
 # CONFIG_TIMESTAMP is not set
 CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SLEEP=y
-CONFIG_CMD_MSLEEP=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_READLINE=y
-CONFIG_CMD_LET=y
-CONFIG_CMD_MENU=y
-CONFIG_CMD_MENU_MANAGEMENT=y
-CONFIG_CMD_TIME=y
-CONFIG_CMD_LN=y
-CONFIG_CMD_FILETYPE=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_MEMINFO=y
+CONFIG_LONGHELP=y
 CONFIG_CMD_IOMEM=y
-CONFIG_CMD_MM=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_ARM_MMUINFO=y
 CONFIG_CMD_BOOTM_SHOW_TYPE=y
 CONFIG_CMD_BOOTM_VERBOSE=y
 CONFIG_CMD_BOOTM_INITRD=y
 CONFIG_CMD_BOOTM_OFTREE=y
-CONFIG_CMD_RESET=y
 CONFIG_CMD_GO=y
-CONFIG_CMD_OFTREE=y
-CONFIG_CMD_OF_PROPERTY=y
-CONFIG_CMD_OF_NODE=y
-CONFIG_CMD_MEMTEST=y
-CONFIG_CMD_BAREBOX_UPDATE=y
-CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_RESET=y
 CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
 CONFIG_CMD_MAGICVAR=y
 CONFIG_CMD_MAGICVAR_HELP=y
-CONFIG_CMD_GPIO=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_MD5SUM=y
 CONFIG_CMD_UNCOMPRESS=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_LED=y
-CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
 CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DETECT=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_BAREBOX_UPDATE=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
 CONFIG_NET=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_PING=y
 CONFIG_NET_NETCONSOLE=y
 CONFIG_NET_RESOLV=y
 CONFIG_OFDEVICE=y

arch/arm/mach-socfpga/Kconfig +4 -0

index 90b3533..73b26ef 100644
@@ -1,5 +1,9 @@
 if ARCH_SOCFPGA
 
+config ARCH_TEXT_BASE
+	hex
+	default 0x0
+
 config ARCH_SOCFPGA_XLOAD
 	bool
 	prompt "Build preloader image"

Signature · 7 lines

2.1.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Lucas Stach

author

2015-06-25 18:30 UTC #3 lore raw

PATCH 4/4 ARM: pxa: move lubbock TEXTBASE to Kconfig

In reply to Lucas Stach

From: Lucas Stach <[email protected]>

So we can drop it from the defconfig and stop bothering the user with this choice by default.

Signed-off-by Lucas Stach <[email protected]>

Acked-by Robert Jarzmik <[email protected]>

---
 arch/arm/configs/lubbock_defconfig | 1 -
 arch/arm/mach-pxa/Kconfig          | 1 +
 2 files changed, 1 insertion(+), 1 deletion(-)

arch/arm/configs/lubbock_defconfig +0 -1

index bf04fa3..224854c 100644
@@ -6,7 +6,6 @@ CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
 CONFIG_ARM_UNWIND=y
 # CONFIG_BANNER is not set
 CONFIG_MMU=y
-CONFIG_TEXT_BASE=0xa3d00000
 CONFIG_BAREBOX_MAX_BARE_INIT_SIZE=0x80000
 CONFIG_MALLOC_SIZE=0x1000000
 CONFIG_EXPERIMENTAL=y

arch/arm/mach-pxa/Kconfig +1 -0

index 610fb1c..2b7f631 100644
@@ -4,6 +4,7 @@ config ARCH_TEXT_BASE
 	hex
 	default 0xa0000000 if MACH_MIOA701
 	default 0xa3f00000 if MACH_PCM027
+	default 0xa3d00000 if MACH_LUBBOCK
 	default 0x83f00000 if MACH_ZYLONITE
 
 # ----------------------------------------------------------

Signature · 7 lines

2.1.0


_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox

Sascha Hauer

Applied

2015-06-26 09:12 UTC #4 lore raw

In reply to Lucas Stach

Quoted 6 lines · Lucas Stach

From: Lucas Stach <[email protected]>
Now that we also have PXA3XX support the dependency on ARCH_PXA is too broad for this driver.
Signed-off-by Lucas Stach <[email protected]>

Applied, thanks

Sascha

Signature · 9 lines

Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/barebox