fm10k: drop transmitted messages in Tx FIFO as part of reset_work
Subsystems (2)
PATCH v2 1/1 fm10k: drop transmitted messages in Tx FIFO as part of reset_work
This patch fixes a corner case issue with the PF/VF mailbox code. Currently, fm10k_mbx_reset_work clears various state about the mailbox. However, it does not clear the Tx FIFO head/tail pointers. We can't simply clear these pointers as we unintentionally drop untransmitted messages without error.
Doing nothing results in a possible phantom re-transmission of messages, since we leave tx.head and tx.tail intact, but clear the tx_pulled and tail_len values. This means that the PF could continuously re-send a message which triggers a reset in the VF. Upon reset, the VF will re-receive the same message after a reconnect.
If we reset the tx.head and tx.tail pointers completely, we end up dropping some messages that were pending before connect. This results in missing LPORT_MSG_READY bits, and VFs will end up reporting no link.
However, we can resolve both issues by simply incrementing head to account for the already transmitted messages, before we reset tx_pulled. We do this via the same logic as fm10k_mbx_head_pull.
We account for the tail_len which includes all data not yet transmitted, once we account for the acked data which means re-reading the HEAD variable from the message header. Then, we drop messages until we've dropped more than the new tx_pulled value. At this point, resetting tail_len and tx_pulled, but not tx.head and tx.tail will result in prevention of the phantom message. It also prevents us from dropping untransmitted messages upon attempting to Tx into a connect or disconnect header.
--- drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +19 -2
@@ -132,7 +132,7 @@ static u16 fm10k_fifo_head_drop(struct fm10k_mbx_fifo *fifo)* This function resets the head pointer to drop all messages in the FIFO, * and ensure the FIFO is empty. **/ -static void fm10k_fifo_drop_all (struct fm10k_mbx_fifo *fifo) +STATIC void fm10k_fifo_drop_all(struct fm10k_mbx_fifo *fifo) { fifo->head = fifo->tail; }
@@ -1046,9 +1046,26 @@ static s32 fm10k_mbx_create_reply(struct fm10k_hw *hw,**/ static void fm10k_mbx_reset_work (struct fm10k_mbx_info *mbx) { +u16 len, head, ack; +/* reset our outgoing max size back to Rx limits */ mbx->max_size = mbx->rx.size -1 ; +/* update mbx->pulled to account for tail_len and ack */ + head =FM10K_MSG_HDR_FIELD_GET (mbx->mbx_hdr,HEAD ); + ack =fm10k_mbx_index_len (mbx, head, mbx->tail); + mbx->pulled += mbx->tail_len - ack; + +/* now drop any messages which have started or finished transmitting */ +while (fm10k_fifo_head_len (&mbx->tx) && mbx->pulled) { + len =fm10k_fifo_head_drop (&mbx->tx); + mbx->tx_dropped++; +if (mbx->pulled >= len) + mbx->pulled -= len; +else + mbx->pulled =0 ; + } +/* just do a quick resysnc to start of message */ mbx->pushed =0 ; mbx->pulled =0 ;
@@ -1725,7 +1742,7 @@ static void fm10k_sm_mbx_disconnect(struct fm10k_hw *hw, mbx->state =FM10K_STATE_CLOSED ; mbx->remote =0 ;fm10k_mbx_reset_work (mbx); -fm10k_mbx_update_max_size (mbx,0 ); +fm10k_fifo_drop_all (&mbx->tx);fm10k_write_reg (hw, mbx->mbmem_reg,0 ); }
Signature · 1 line
2.4.3
Keller
PATCH v2 1/1 fm10k: drop transmitted messages in Tx FIFO as part of reset_work
Quoted 47 lines · Jacob Keller
This patch fixes a corner case issue with the PF/VF mailbox code. Currently,
fm10k_mbx_reset_workclears various state about the mailbox.
However, it does not clear the Tx FIFO head/tail pointers. We can't simply clear these pointers as we unintentionally drop untransmitted messages without error.Doing nothing results in a possible phantom re-transmission of messages,
since we leave tx.head and tx.tail intact, but clear thetx_pulledandtail_lenvalues. This means that the PF could continuously re-send a message which triggers a reset in the VF. Upon reset, the VF will re-receive the same message after a reconnect.If we reset the tx.head and tx.tail pointers completely, we end up dropping some messages that were pending before connect. This results in
missingLPORT_MSG_READYbits, and VFs will end up reporting no link.However, we can resolve both issues by simply incrementing head to account for the already transmitted messages, before we reset
tx_pulled.
We do this via the same logic asfm10k_mbx_head_pull.We account for the
tail_lenwhich includes all data not yet transmitted,
once we account for the acked data which means re-reading the HEAD variable from the message header. Then, we drop messages until we've dropped more than the newtx_pulledvalue. At this point, resettingtail_lenandtx_pulled, but not tx.head and tx.tail will result in prevention of the phantom message. It also prevents us from dropping untransmitted messages upon attempting to Tx into a connect or disconnect header.Signed-off-by Jacob Keller <[email protected]>--- drivers/net/ethernet/intel/fm10k/fm10k_mbx.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-)drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +0
-0
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c static u16 fm10k_fifo_head_drop(struct · line 138
Quoted 8 lines
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +1
-1@@ -132,7 +132,7 @@ static u16 fm10k_fifo_head_drop(structfm10k_mbx_fifo *fifo) * This function resets the head pointer to drop all messages in the FIFO, * and ensure the FIFO is empty. **/ -static void fm10k_fifo_drop_all (struct fm10k_mbx_fifo *fifo) +STATIC void fm10k_fifo_drop_all(struct fm10k_mbx_fifo *fifo) {
Woops this shouldn't have happened. Sending a fixed version.
Regards
Quoted 41 lines
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +8
-0fifo->head = fifo->tail; }@@ -1046,9 +1046,26 @@ static s32 fm10k_mbx_create_reply(structfm10k_hw *hw, **/ static void fm10k_mbx_reset_work (struct fm10k_mbx_info *mbx) { +u16 len, head, ack; +/* reset our outgoing max size back to Rx limits */ mbx->max_size = mbx->rx.size -1 ; +/* update mbx->pulled to account for tail_len and ack */ + head =FM10K_MSG_HDR_FIELD_GET (mbx->mbx_hdr,HEAD ); + ack =fm10k_mbx_index_len (mbx, head, mbx->tail); + mbx->pulled += mbx->tail_len - ack; + +/* now drop any messages which have started or finished transmitting */
drivers/net/ethernet/intel/fm10k/fm10k_mbx.c +10
-1+while (fm10k_fifo_head_len (&mbx->tx) && mbx->pulled) { + len =fm10k_fifo_head_drop (&mbx->tx); + mbx->tx_dropped++; +if (mbx->pulled >= len) + mbx->pulled -= len; +else + mbx->pulled =0 ; + } +/* just do a quick resysnc to start of message */ mbx->pushed =0 ; mbx->pulled =0 ;@@ -1725,7 +1742,7 @@ static void fm10k_sm_mbx_disconnect(struct fm10k_hw *hw, mbx->state =FM10K_STATE_CLOSED ; mbx->remote =0 ;fm10k_mbx_reset_work (mbx); -fm10k_mbx_update_max_size (mbx,0 ); +fm10k_fifo_drop_all (&mbx->tx);fm10k_write_reg (hw, mbx->mbmem_reg,0 );}