staging: sm750fb: replace spaces with tabs
PATCH 1/11 staging: sm750fb: replace spaces with tabs
Replace spaces with tabs according to checkpatch.pl error message:
"ERROR: code indent should use tabs where possible"
Signed-off-by Anatoly Stepanov <[email protected]>
--- drivers/staging/sm750fb/sm750_hw.c | 70 +++++++++++++++++++------------------- 1 file changed, 35 insertions(+), 35 deletions(-)
drivers/staging/sm750fb/sm750_hw.c +35 -35
@@ -171,23 +171,23 @@ int hw_sm750_inithw(struct lynx_share *share, struct pci_dev *pdev)/* Set up GPIO for software I2C to program DVI chip in the Xilinx SP605 board, in order to have video signal. */ -swI2CInit (0 ,1 ); +swI2CInit (0 ,1 ); -/* Customer may NOT use CH7301 DVI chip, which has to be -initialized differently. -*/ -if (swI2CReadReg (0xec ,0x4a ) =0x95 ) - { -/* The following register values for CH7301 are from -Chrontel app note and our experiment. -*/ +/* Customer may NOT use CH7301 DVI chip, which has to be +initialized differently. +*/ +if (swI2CReadReg (0xec ,0x4a ) =0x95 ) + { +/* The following register values for CH7301 are from +Chrontel app note and our experiment. +*/ pr_info ("yes,CH7301 DVI chip found\n" ); -swI2CWriteReg (0xec ,0x1d ,0x16 ); -swI2CWriteReg (0xec ,0x21 ,0x9 ); -swI2CWriteReg (0xec ,0x49 ,0xC0 ); +swI2CWriteReg (0xec ,0x1d ,0x16 ); +swI2CWriteReg (0xec ,0x21 ,0x9 ); +swI2CWriteReg (0xec ,0x49 ,0xC0 );pr_info ("okay,CH7301 DVI chip setup done\n" ); - } + } }/* init 2d engine */
@@ -612,28 +612,28 @@ int hw_sm750_deWait(void) }int hw_sm750_pan_display (struct lynxfb_crtc *crtc, -const struct fb_var_screeninfo *var, -const struct fb_info *info) +const struct fb_var_screeninfo *var, +const struct fb_info *info) { -uint32_t total; -/* check params */ -if ((var->xoffset + var->xres > var->xres_virtual) || - (var->yoffset + var->yres > var->yres_virtual)) { -return -EINVAL ; - } - - total = var->yoffset * info->fix.line_length + - ((var->xoffset * var->bits_per_pixel) >>3 ); - total += crtc->oScreen; -if (crtc->channel = sm750_primary) { -POKE32 (PANEL_FB_ADDRESS , -FIELD_VALUE (PEEK32 (PANEL_FB_ADDRESS ), -PANEL_FB_ADDRESS ,ADDRESS , total)); - }else { -POKE32 (CRT_FB_ADDRESS , -FIELD_VALUE (PEEK32 (CRT_FB_ADDRESS ), -CRT_FB_ADDRESS ,ADDRESS , total)); - } -return 0 ; +uint32_t total; +/* check params */ +if ((var->xoffset + var->xres > var->xres_virtual) || + (var->yoffset + var->yres > var->yres_virtual)) { +return -EINVAL ; + } + + total = var->yoffset * info->fix.line_length + + ((var->xoffset * var->bits_per_pixel) >>3 ); + total += crtc->oScreen; +if (crtc->channel = sm750_primary) { +POKE32 (PANEL_FB_ADDRESS , +FIELD_VALUE (PEEK32 (PANEL_FB_ADDRESS ), +PANEL_FB_ADDRESS ,ADDRESS , total)); + }else { +POKE32 (CRT_FB_ADDRESS , +FIELD_VALUE (PEEK32 (CRT_FB_ADDRESS ), +CRT_FB_ADDRESS ,ADDRESS , total)); + } +return 0 ; }
Signature · 1 line
2.1.0