ASoC: wm0010: Remove .bus field setting from wm0010_spi_driver

PATCH In review Axel Lin 3 participants 3 messages Jul 2, 2015 – Jul 3, 2015

Subsystems (3)

Sound ASoC Wolfson microelectronics drivers

lore

Share & tools

lore

Axel Lin

author

2015-07-02 04:03 UTC #0 lore raw

PATCH 1/1 ASoC: wm0010: Remove .bus field setting from wm0010_spi_driver

The .bus field will be set by spi_register_driver() so we don't need to set it in wm0010_spi_driver.

Signed-off-by Axel Lin <[email protected]>

---
 sound/soc/codecs/wm0010.c | 1 -
 1 file changed, 1 deletion(-)

sound/soc/codecs/wm0010.c +0 -1

index 6560a66..e1da49f 100644
@@ -1003,7 +1003,6 @@ static int wm0010_spi_remove(struct spi_device *spi)
 static struct spi_driver wm0010_spi_driver = {
 	.driver = {
 		.name	= "wm0010",
-		.bus 	= &spi_bus_type,
 		.owner	= THIS_MODULE,
 	},
 	.probe		= wm0010_spi_probe,

Signature · 1 line

2.1.0

Charles Keepax

Acked-by on v1 1/1

2015-07-02 11:29 UTC #1 lore raw

Quoted 5 lines · Axel Lin

The .bus field will be set by spi_register_driver() so we don't need to set it in wm0010_spi_driver.
Signed-off-by Axel Lin <[email protected]>
---

Acked-by Charles Keepax <[email protected]>

Thanks,
Charles

Mark Brown

maintainer

2015-07-03 12:47 UTC #2 lore raw

In reply to Axel Lin

Quoted 2 lines · Axel Lin

The .bus field will be set by spi_register_driver() so we don't need to set it in wm0010_spi_driver.

A similar change has already been sent.