CABC patch list
Subsystems (3)
cover CABC patch list
CABC stands for the Content Adaptive Backlight Control.
In the normal display the backlight which we see is due to the backlight which is being modulated by the filter, which is inturn dependent on the image. In brief the CABC does the histogram analysis of the image and then controls the filter and backlight. For example in CABC to display the dark image the backlight is dimmed and then controlls the filter to allow more light, because of which is power consuption will be reduced.
Below are the inital set of patches which supports the CABC. A field exits in the mipi configuration of the VBT which when enabled indiactes the CABC is supported. Depending on this filed the backlight control function pointer are initalized in the intel_panel.c file.
In case of dual link panels depending on the panel the DCS commands have to be send to either PORT A, PORT C or both PORT A and PORT C. Again a filed is added in the VBT to get this data from the version 197 onwards. One of the below patches parses these fields from the VBT.
Please review the below patches.
Deepak M (3):
drm/i915: Store the CABC enabled field parsed from VBT to dev_priv
structure
drm/i915: Parsing the PWM cntrl and CABC ON/OFF fileds in VBT drm/i915: CABC support for backlight control
drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 15 +++ drivers/gpu/drm/i915/intel_bios.h | 5 +- drivers/gpu/drm/i915/intel_dsi.h | 15 +++ drivers/gpu/drm/i915/intel_panel.c | 225 +++++++++++++++++++++++++++++++++++- include/video/mipi_display.h | 8 ++ 6 files changed, 263 insertions(+), 6 deletions(-)
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH 1/3 drm/i915: Store the CABC enabled field parsed from VBT to dev_priv structure
--- drivers/gpu/drm/i915/i915_drv.h | 1 + drivers/gpu/drm/i915/intel_bios.c | 2 ++ 2 files changed, 3 insertions(+)
drivers/gpu/drm/i915/i915_drv.h +1 -0
@@ -1470,6 +1470,7 @@ struct intel_vbt_data {struct mipi_config *config;struct mipi_pps_data *pps;u8 seq_version; +u8 cabc_supported;u32 size;u8 *data;u8 *sequence[MIPI_SEQ_MAX ];
drivers/gpu/drm/i915/intel_bios.c +2 -0
@@ -845,6 +845,8 @@ parse_mipi(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)if (!dev_priv->vbt.dsi.data)return ; + dev_priv->vbt.dsi.config->cabc_supported = config->cabc_supported; +/* * loop into the sequence data and split into multiple sequneces * There are only 5 types of sequences as of now
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH 2/3 drm/i915: Parsing the PWM cntrl and CABC ON/OFF fileds in VBT
In reply to Deepak MFor dual link panel scenarios there are new fileds added in the VBT which indicate on which port the PWM cntrl and CABC ON/OFF commands needs to be sent.
--- drivers/gpu/drm/i915/intel_bios.c | 13 +++++++++++++ drivers/gpu/drm/i915/intel_bios.h | 5 ++++- drivers/gpu/drm/i915/intel_dsi.h | 2 ++ 3 files changed, 19 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_bios.c +13 -0
@@ -789,6 +789,19 @@ parse_mipi(struct drm_i915_private *dev_priv, const struct bdb_header *bdb)return ; } +/* +* These below bits will inform us on which port the panel blk_cntrl and +* CABC ON/OFF commands needs to be sent in case of dual link panels +* u16 dl_cabc_port:2; +* u16 pwm_bkl_ctrl:2; +* But these are introduced from the VBT version 197 onwards, so making +* sure that these bits are zero in the pervious versions. +*/ +if (dev_priv->vbt.dsi.config->dual_link && bdb->version <197 ) { + dev_priv->vbt.dsi.config->dl_cabc_port =0 ; + dev_priv->vbt.dsi.config->pwm_bkl_ctrl =0 ; + } +/* We have mandatory mipi config blocks. Initialize as generic panel */ dev_priv->vbt.dsi.panel_id =MIPI_DSI_GENERIC_PANEL_ID ;
drivers/gpu/drm/i915/intel_bios.h +4 -1
@@ -820,7 +820,10 @@ struct mipi_config { u16 dual_link:2; u16 lane_cnt:2; u16 pixel_overlap:3; - u16 rsvd3:9; + u16 rgb_flip:1; + u16 dl_cabc_port:2; + u16 pwm_bkl_ctrl:2; + u16 rsvd3:4;u16 rsvd4;
drivers/gpu/drm/i915/intel_dsi.h +2 -0
@@ -71,6 +71,8 @@ struct intel_dsi {u8 escape_clk_div;u8 dual_link; +u8 dl_cabc_port; +u8 pwm_blk_ctrl;u8 pixel_overlap;u32 port_bits;u32 bw_timer;
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH 3/3 drm/i915: CABC support for backlight control
In reply to Deepak MIn CABC (Content Adaptive Brightness Control) content grey level scale can be increased while simultaneously decreasing brightness of the backlight to achieve same perceived brightness.
The CABC is not standardized and panel vendors are free to follow their implementation. The CABC implementaion here assumes that the panels use standard SW register for control.
In this design there will be no PWM signal from the SoC and DCS commands are sent to enable and control the backlight brightness.
--- drivers/gpu/drm/i915/intel_dsi.h | 13 +++ drivers/gpu/drm/i915/intel_panel.c | 226 +++++++++++++++++++++++++++++++++++- include/video/mipi_display.h | 8 ++ 3 files changed, 242 insertions(+), 5 deletions(-)
drivers/gpu/drm/i915/intel_dsi.h +13 -0
@@ -34,6 +34,19 @@#define DSI_DUAL_LINK_FRONT_BACK 1#define DSI_DUAL_LINK_PIXEL_ALT 2 +#define CABC_OFF (0 << 0) +#define CABC_USER_INTERFACE_IMAGE (1 << 0) +#define CABC_STILL_PICTURE (2 << 0) +#define CABC_VIDEO_MODE (3 << 0) + +#define CABC_BACKLIGHT (1 << 2) +#define CABC_DIMMING_DISPLAY (1 << 3) +#define CABC_BCTRL (1 << 5) + +#define CABC_PORT_A 0x00 +#define CABC_PORT_C 0x01 +#define CABC_PORT_A_AND_C 0x02 +struct intel_dsi_host ;struct intel_dsi {
drivers/gpu/drm/i915/intel_panel.c +221 -5
269 lines not on this page · raw message
include/video/mipi_display.h +8 -0
@@ -117,6 +117,14 @@ enum {MIPI_DCS_GET_SCANLINE =0x45 ,MIPI_DCS_READ_DDB_START =0xA1 ,MIPI_DCS_READ_DDB_CONTINUE =0xA8 , +MIPI_DCS_CABC_LEVEL_RD =0x52 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_RD =0x5F , +MIPI_DCS_CABC_CONTROL_RD =0x56 , +MIPI_DCS_CABC_CONTROL_BRIGHT_RD =0x54 , +MIPI_DCS_CABC_LEVEL_WR =0x51 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_WR =0x5E , +MIPI_DCS_CABC_CONTROL_WR =0x55 , + MIPI_DCS_CABC_CONTROL_BRIGHT_WR = 0x53, };/* MIPI DCS pixel formats */
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [CABC PATCH v1 3/3][RFC] drm/i915: CABC support for backlight control
Quoted 67 lines · Deepak M
In CABC (Content Adaptive Brightness Control) content grey level scale can be increased while simultaneously decreasing brightness of the backlight to achieve same perceived brightness.
The CABC is not standardized and panel vendors are free to follow their implementation. The CABC implementaion here assumes that the panels use standard SW register for control.
In this design there will be no PWM signal from the SoC and DCS commands are sent to enable and control the backlight brightness.
Signed-off-by Deepak M <[email protected]>--- drivers/gpu/drm/i915/intel_dsi.h | 13 +++ drivers/gpu/drm/i915/intel_panel.c | 226 +++++++++++++++++++++++++++++++++++- include/video/mipi_display.h | 8 ++ 3 files changed, 242 insertions(+), 5 deletions(-)drivers/gpu/drm/i915/intel_dsi.h +13
-0@@ -34,6 +34,19 @@#define DSI_DUAL_LINK_FRONT_BACK 1#define DSI_DUAL_LINK_PIXEL_ALT 2 +#define CABC_OFF (0 << 0) +#define CABC_USER_INTERFACE_IMAGE (1 << 0) +#define CABC_STILL_PICTURE (2 << 0) +#define CABC_VIDEO_MODE (3 << 0) + +#define CABC_BACKLIGHT (1 << 2) +#define CABC_DIMMING_DISPLAY (1 << 3) +#define CABC_BCTRL (1 << 5) + +#define CABC_PORT_A 0x00 +#define CABC_PORT_C 0x01 +#define CABC_PORT_A_AND_C 0x02 +struct intel_dsi_host ;struct intel_dsi {drivers/gpu/drm/i915/intel_panel.c +9
-0@@ -32,7 +32,10 @@#include <linux/kernel.h> #include <linux/moduleparam.h> +#include <video/mipi_display.h> +#include <drm/drm_mipi_dsi.h> #include "intel_drv.h" +#include "intel_dsi.h" void intel_fixed_panel_mode(const struct drm_display_mode *fixed_mode,@@ -536,6 +539,37 @@ static u32 vlv_get_backlight(struct intel_connector *connector)return _vlv_get_backlight (dev, pipe); } +static u32 cabc_get_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ;
drivers/gpu/drm/i915/intel_panel.c static u32 vlv_get_backlight(struct intel_connector *connector) · line 557
Quoted 10 lines
drivers/gpu/drm/i915/intel_panel.c +10
-0+struct mipi_dsi_device *dsi_device; +u8 data[2 ] = {0 }; +enum port port =PORT_A ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + }
We seem to have a bit a layering violation going on here: The dev_priv->display.*_backlight functions are for the device global backlight. But this here controls a sink-specific backlight.
Another example of a sink-specific backlight control would be the optional backlight stuff for eDP. In linux we have a few backlight classes like firmware, platform or raw. The i915 backlight is a raw one and last in the priority chain userspace uses to figure out which backlight to use.
I think the right approach here for the CABC dsi sink backlight is to register a new dsi backlight driver (if and only if the panel supports it of course) of type firmware (or something else suitable). Then it will automatically take precendence over the i915 raw backlight. It would also be good to have an explicit link from the sysfs connector to this connector-specific backlight so that userspace knows about it.
Or something along those lines, linux backlight control is one giant mess.
At least with that approach we don't need to have any interaction with the panel backlight code and this should all more-or-less cleanly integrate. -Daniel
Quoted 271 lines
drivers/gpu/drm/i915/intel_panel.c +202
-5+ +if (intel_dsi->dual_link) { +if (intel_dsi->dl_cabc_port ==CABC_PORT_A || + intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; + } + + dsi_device = intel_dsi->dsi_hosts[port]->device; +mipi_dsi_dcs_read (dsi_device,MIPI_DCS_CABC_LEVEL_RD , data,2 ); + +return data[1 ]; +} +static u32 bxt_get_backlight (struct intel_connector *connector) {struct drm_device *dev = connector->base.dev;@@ -624,6 +658,47 @@ static void vlv_set_backlight(struct intel_connector *connector, u32 level)I915_WRITE (VLV_BLC_PWM_CTL (pipe), tmp | level); } +static void cabc_set_backlight (struct intel_connector *connector,u32 level) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +u8 data[2 ] = {0 }; +enum port port =PORT_A ; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) { +if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + +do { + dsi_device = intel_dsi->dsi_hosts[port]->device; + data[1 ] = level; + data[0 ] =MIPI_DCS_CABC_LEVEL_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); +} +static void bxt_set_backlight (struct intel_connector *connector,u32 level) {struct drm_device *dev = connector->base.dev;@@ -757,6 +832,52 @@ static void vlv_disable_backlight(struct intel_connector *connector)I915_WRITE (VLV_BLC_PWM_CTL2 (pipe), tmp & ~BLM_PWM_ENABLE ); } +static void cabc_disable_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +enum port port =PORT_A ; +u8 data[2 ] = {0 }; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) { +if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + +do { + dsi_device = intel_dsi->dsi_hosts[port]->device; + +intel_panel_actually_set_backlight (connector,0 ); + data[1 ] =CABC_OFF ; + data[0 ] =MIPI_DCS_CABC_CONTROL_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + data[0 ] =MIPI_DCS_CABC_CONTROL_BRIGHT_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); +} +static void bxt_disable_backlight (struct intel_connector *connector) {struct drm_device *dev = connector->base.dev;@@ -1043,6 +1164,56 @@ void intel_panel_enable_backlight(struct intel_connector *connector)mutex_unlock (&dev_priv->backlight_lock); } +static void cabc_enable_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct intel_panel *panel = &connector->panel; +struct mipi_dsi_device *dsi_device; +enum port port =PORT_A ; +u8 data[2 ] = {0 }; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) { +if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + +do { + dsi_device = intel_dsi->dsi_hosts[port]->device; + + + data[0 ] =MIPI_DCS_CABC_CONTROL_BRIGHT_WR ; + data[1 ] =CABC_BACKLIGHT |CABC_DIMMING_DISPLAY |CABC_BCTRL ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + data[0 ] =MIPI_DCS_CABC_CONTROL_WR ; + data[1 ] =CABC_VIDEO_MODE ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); + +intel_panel_actually_set_backlight (connector, panel->backlight.level); +} +#if IS_ENABLED (CONFIG_BACKLIGHT_CLASS_DEVICE )static int intel_backlight_device_update_status (struct backlight_device *bd) {@@ -1362,6 +1533,33 @@ static int vlv_setup_backlight(struct intel_connector *connector, enum pipe pipereturn 0 ; } +static int cabc_setup_backlight (struct intel_connector *connector, +enum pipe unused) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct intel_panel *panel = &connector->panel; +struct mipi_dsi_device *dsi_device; +u8 level; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + dsi_device = intel_dsi->dsi_hosts[0 ]->device; + panel->backlight.max =0xFF ; + panel->backlight.level =0xFF ; + + level =255 ; + panel->backlight.enabled = + (level &0x02 ) && panel->backlight.level !=0 ; +return 0 ; +} +static int bxt_setup_backlight (struct intel_connector *connector,enum pipe unused) {@@ -1438,11 +1636,29 @@ void intel_panel_init_backlight_funcs(struct drm_device *dev)struct drm_i915_private *dev_priv = dev->dev_private;if (IS_BROXTON (dev)) { - dev_priv->display.setup_backlight = bxt_setup_backlight; - dev_priv->display.enable_backlight = bxt_enable_backlight; - dev_priv->display.disable_backlight = bxt_disable_backlight; - dev_priv->display.set_backlight = bxt_set_backlight; - dev_priv->display.get_backlight = bxt_get_backlight; +if (dev_priv->vbt.dsi.config->cabc_supported) { + dev_priv->display.setup_backlight = + cabc_setup_backlight; + dev_priv->display.enable_backlight = + cabc_enable_backlight; + dev_priv->display.disable_backlight = + cabc_disable_backlight; + dev_priv->display.set_backlight = + cabc_set_backlight; + dev_priv->display.get_backlight = + cabc_get_backlight; + }else { + dev_priv->display.setup_backlight = + bxt_setup_backlight; + dev_priv->display.enable_backlight = + bxt_enable_backlight; + dev_priv->display.disable_backlight = + bxt_disable_backlight; + dev_priv->display.set_backlight = + bxt_set_backlight; + dev_priv->display.get_backlight = + bxt_get_backlight; + } }else if (IS_BROADWELL (dev) ||IS_SKYLAKE (dev)) { dev_priv->display.setup_backlight = bdw_setup_backlight; dev_priv->display.enable_backlight = bdw_enable_backlight;include/video/mipi_display.h +8
-0@@ -117,6 +117,14 @@ enum {MIPI_DCS_GET_SCANLINE =0x45 ,MIPI_DCS_READ_DDB_START =0xA1 ,MIPI_DCS_READ_DDB_CONTINUE =0xA8 , +MIPI_DCS_CABC_LEVEL_RD =0x52 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_RD =0x5F , +MIPI_DCS_CABC_CONTROL_RD =0x56 , +MIPI_DCS_CABC_CONTROL_BRIGHT_RD =0x54 , +MIPI_DCS_CABC_LEVEL_WR =0x51 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_WR =0x5E , +MIPI_DCS_CABC_CONTROL_WR =0x55 , + MIPI_DCS_CABC_CONTROL_BRIGHT_WR = 0x53, };/* MIPI DCS pixel formats */ Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
RFC PATCH v2 3/3 drm/i915: CABC support for backlight control
In CABC (Content Adaptive Brightness Control) content grey level scale can be increased while simultaneously decreasing brightness of the backlight to achieve same perceived brightness.
The CABC is not standardized and panel vendors are free to follow their implementation. The CABC implementaion here assumes that the panels use standard SW register for control.
In this design there will be no PWM signal from the SoC and DCS commands are sent to enable and control the backlight brightness.
v2:
- Created a new backlight driver for cabc, which will be registered only when it cabc is supported by panel.
(Addressed comment from Daniel Vetter)
--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_drv.h | 3 +- drivers/gpu/drm/i915/intel_dsi.c | 13 ++ drivers/gpu/drm/i915/intel_dsi_cabc.c | 349 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_dsi_cabc.h | 45 +++++ drivers/gpu/drm/i915/intel_panel.c | 22 ++- include/video/mipi_display.h | 8 + 7 files changed, 436 insertions(+), 5 deletions(-) create mode 100644 drivers/gpu/drm/i915/intel_dsi_cabc.c create mode 100644 drivers/gpu/drm/i915/intel_dsi_cabc.h
drivers/gpu/drm/i915/Makefile +1 -0
@@ -75,6 +75,7 @@ i915-y += dvo_ch7017.o \ intel_dp_mst.o \ intel_dsi.o \ intel_dsi_pll.o \ + intel_dsi_cabc.o \ intel_dsi_panel_vbt.o \ intel_dvo.o \ intel_hdmi.o \
drivers/gpu/drm/i915/intel_drv.h +2 -1
@@ -1319,7 +1319,8 @@ extern struct drm_display_mode *intel_find_panel_downclock( struct drm_connector *connector);void intel_backlight_register (struct drm_device *dev);void intel_backlight_unregister (struct drm_device *dev); - +extern int cabc_backlight_device_register (struct intel_connector *connector); +extern void cabc_backlight_device_unregister (struct intel_connector *connector);/* intel_psr.c */ void intel_psr_enable (struct intel_dp *intel_dp);
drivers/gpu/drm/i915/intel_dsi.c +13 -0
@@ -34,6 +34,7 @@#include "i915_drv.h" #include "intel_drv.h" #include "intel_dsi.h" +#include "intel_dsi_cabc.h" static const struct { u16 panel_id;
@@ -376,6 +377,7 @@ static void intel_dsi_enable(struct intel_encoder *encoder)struct drm_device *dev = encoder->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +struct intel_connector *connector = intel_dsi->attached_connector;enum port port;DRM_DEBUG_KMS ("\n" );
@@ -396,6 +398,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)intel_dsi_port_enable (encoder); } + +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_enable_backlight (connector); }static void intel_dsi_pre_enable (struct intel_encoder *encoder)
@@ -469,11 +474,15 @@ static void intel_dsi_disable(struct intel_encoder *encoder)struct drm_device *dev = encoder->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +struct intel_connector *connector = intel_dsi->attached_connector;enum port port;u32 temp;DRM_DEBUG_KMS ("\n" ); +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_disable_backlight (connector); +if (is_vid_mode (intel_dsi)) {for_each_dsi_port (port, intel_dsi->ports)wait_for_dsi_fifo_empty (intel_dsi, port);
@@ -1099,6 +1108,10 @@ void intel_dsi_init(struct drm_device *dev)intel_panel_init (&intel_connector->panel, fixed_mode,NULL ); +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_setup_backlight (connector, + intel_encoder->crtc_mask == + (1 <<PIPE_A ) ?PIPE_A :PIPE_B );return ; err:
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +349 -0
349 lines not on this page · raw message
drivers/gpu/drm/i915/intel_dsi_cabc.h new file +45 -0
45 lines not on this page · raw message
drivers/gpu/drm/i915/intel_panel.c +18 -4
@@ -1502,15 +1502,29 @@ void intel_panel_fini(struct intel_panel *panel)void intel_backlight_register (struct drm_device *dev) {struct intel_connector *connector; +struct drm_i915_private *dev_priv = dev->dev_private; -list_for_each_entry (connector, &dev->mode_config.connector_list, base.head) -intel_backlight_device_register (connector); +list_for_each_entry (connector, &dev->mode_config.connector_list, + base.head) { +if (connector->encoder->type ==INTEL_OUTPUT_DSI && + dev_priv->vbt.dsi.config->cabc_supported) +cabc_backlight_device_register (connector); +else +intel_backlight_device_register (connector); + } }void intel_backlight_unregister (struct drm_device *dev) {struct intel_connector *connector; +struct drm_i915_private *dev_priv = dev->dev_private; -list_for_each_entry (connector, &dev->mode_config.connector_list, base.head) -intel_backlight_device_unregister (connector); +list_for_each_entry (connector, &dev->mode_config.connector_list, + base.head) { +if (connector->encoder->type ==INTEL_OUTPUT_DSI && + dev_priv->vbt.dsi.config->cabc_supported) +cabc_backlight_device_unregister (connector); +else +intel_backlight_device_unregister (connector); + } }
include/video/mipi_display.h +8 -0
@@ -117,6 +117,14 @@ enum {MIPI_DCS_GET_SCANLINE =0x45 ,MIPI_DCS_READ_DDB_START =0xA1 ,MIPI_DCS_READ_DDB_CONTINUE =0xA8 , +MIPI_DCS_CABC_LEVEL_RD =0x52 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_RD =0x5F , +MIPI_DCS_CABC_CONTROL_RD =0x56 , +MIPI_DCS_CABC_CONTROL_BRIGHT_RD =0x54 , +MIPI_DCS_CABC_LEVEL_WR =0x51 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_WR =0x5E , +MIPI_DCS_CABC_CONTROL_WR =0x55 , + MIPI_DCS_CABC_CONTROL_BRIGHT_WR = 0x53, };/* MIPI DCS pixel formats */
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [RFC CABC PATCH v2 3/3] drm/i915: CABC support for backlight control
Quoted 159 lines · Deepak M
In CABC (Content Adaptive Brightness Control) content grey level scale can be increased while simultaneously decreasing brightness of the backlight to achieve same perceived brightness.
The CABC is not standardized and panel vendors are free to follow their implementation. The CABC implementaion here assumes that the panels use standard SW register for control.
In this design there will be no PWM signal from the SoC and DCS commands are sent to enable and control the backlight brightness.
v2:
- Created a new backlight driver for cabc, which will be registered only when it cabc is supported by panel.
(Addressed comment from Daniel Vetter)Signed-off-by Deepak M <[email protected]>--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_drv.h | 3 +- drivers/gpu/drm/i915/intel_dsi.c | 13 ++ drivers/gpu/drm/i915/intel_dsi_cabc.c | 349 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_dsi_cabc.h | 45 +++++ drivers/gpu/drm/i915/intel_panel.c | 22 ++- include/video/mipi_display.h | 8 + 7 files changed, 436 insertions(+), 5 deletions(-)create mode 100644
drivers/gpu/drm/i915/intel_dsi_cabc.ccreate mode 100644drivers/gpu/drm/i915/intel_dsi_cabc.hdrivers/gpu/drm/i915/Makefile +1
-0@@ -75,6 +75,7 @@ i915-y += dvo_ch7017.o \ intel_dp_mst.o \ intel_dsi.o \ intel_dsi_pll.o \ + intel_dsi_cabc.o \ intel_dsi_panel_vbt.o \ intel_dvo.o \ intel_hdmi.o \drivers/gpu/drm/i915/intel_drv.h +2
-1@@ -1319,7 +1319,8 @@ extern struct drm_display_mode *intel_find_panel_downclock( struct drm_connector *connector);void intel_backlight_register (struct drm_device *dev);void intel_backlight_unregister (struct drm_device *dev); - +extern int cabc_backlight_device_register (struct intel_connector *connector); +extern void cabc_backlight_device_unregister (struct intel_connector *connector);/* intel_psr.c */ void intel_psr_enable (struct intel_dp *intel_dp);drivers/gpu/drm/i915/intel_dsi.c +13
-0@@ -34,6 +34,7 @@#include "i915_drv.h" #include "intel_drv.h" #include "intel_dsi.h" +#include "intel_dsi_cabc.h" static const struct { u16 panel_id;@@ -376,6 +377,7 @@ static void intel_dsi_enable(struct intel_encoder *encoder)struct drm_device *dev = encoder->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +struct intel_connector *connector = intel_dsi->attached_connector;enum port port;DRM_DEBUG_KMS ("\n" );@@ -396,6 +398,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)intel_dsi_port_enable (encoder); } + +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_enable_backlight (connector); }static void intel_dsi_pre_enable (struct intel_encoder *encoder)@@ -469,11 +474,15 @@ static void intel_dsi_disable(struct intel_encoder *encoder)struct drm_device *dev = encoder->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +struct intel_connector *connector = intel_dsi->attached_connector;enum port port;u32 temp;DRM_DEBUG_KMS ("\n" ); +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_disable_backlight (connector); +if (is_vid_mode (intel_dsi)) {for_each_dsi_port (port, intel_dsi->ports)wait_for_dsi_fifo_empty (intel_dsi, port);@@ -1099,6 +1108,10 @@ void intel_dsi_init(struct drm_device *dev)intel_panel_init (&intel_connector->panel, fixed_mode,NULL ); +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_setup_backlight (connector, + intel_encoder->crtc_mask == + (1 <<PIPE_A ) ?PIPE_A :PIPE_B );return ; err:drivers/gpu/drm/i915/intel_dsi_cabc.c new file +41
-0@@ -0,0 +1,349 @@ +/* +* Copyright © 2006-2010 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +* DEALINGS IN THE SOFTWARE. +* +*/ + +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include "intel_drv.h" +#include "intel_dsi.h" +#include "i915_drv.h" +#include "intel_dsi_cabc.h" +#include <video/mipi_display.h> +#include <drm/drm_mipi_dsi.h> + +int cabc_setup_backlight (struct intel_connector *connector, +enum pipe unused) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct intel_panel *panel = &connector->panel;
drivers/gpu/drm/i915/intel_dsi_cabc.c line 51
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+struct mipi_dsi_device *dsi_device; +u8 level; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + dsi_device = intel_dsi->dsi_hosts[0 ]->device;
This will work only for MIPI Port A not for MIPI Port C. Use for_each_dsi_port macro and intel_dsi->dsi_hosts[port] to correctly reach to mipi_dsi_device for both ports. If it is dual link, break after the completion of the first iteration.
Quoted 7 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +7
-0+ panel->backlight.max =CABC_MAX_VALUE ; + panel->backlight.level =CABC_MAX_VALUE ; + level =CABC_MAX_VALUE ; + panel->backlight.enabled = true; +return 0 ; +} +
drivers/gpu/drm/i915/intel_dsi_cabc.c line 68
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+u32 cabc_get_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +struct intel_panel *panel = &connector->panel; +u8 data[2 ] = {0 }; +enum port port =PORT_A ;
will fail for single link MIPI Port C.
drivers/gpu/drm/i915/intel_dsi_cabc.c line 77
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+u32 ret; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } +if (intel_dsi->dual_link) {
Put the below or required logic into static inline function returning enum port .
drivers/gpu/drm/i915/intel_dsi_cabc.c line 83
Quoted 6 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +6
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A || + intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; + }
Use for_each_dsi_port macro here . call the inline function within for_each_dsi_port macro to get the required enum port for dual link.
Quoted 19 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +19
-0+ + dsi_device = intel_dsi->dsi_hosts[port]->device; +mipi_dsi_dcs_read (dsi_device,MIPI_DCS_CABC_LEVEL_RD , data,2 ); + + ret = (data[1 ] * panel->backlight.max) /255 ; +return ret; +} + +void cabc_set_backlight (struct intel_connector *connector,u32 level) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +u8 data[2 ] = {0 }; +enum port port =PORT_A ; +struct intel_panel *panel = &connector->panel; +u8 count =1 ;
drivers/gpu/drm/i915/intel_dsi_cabc.c line 112
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+u32 hw_level; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) {
Put the below logic into static inline function returning enum port .
drivers/gpu/drm/i915/intel_dsi_cabc.c line 120
Quoted 8 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +8
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } +
Below part not required. use for_each_dsi_port macro.
drivers/gpu/drm/i915/intel_dsi_cabc.c line 129
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + + + hw_level = level % (panel->backlight.max +1 ); + hw_level = (hw_level *255 ) / panel->backlight.max; + panel->backlight.level = hw_level; +
Use for_each_dsi_port macro as explained above.
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+do { + dsi_device = intel_dsi->dsi_hosts[port]->device; + data[1 ] = hw_level; + data[0 ] =MIPI_DCS_CABC_LEVEL_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); +}
drivers/gpu/drm/i915/intel_dsi_cabc.c line 148
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+ +void cabc_enable_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct intel_panel *panel = &connector->panel; +struct mipi_dsi_device *dsi_device; +enum port port =PORT_A ;
Will fail for single link Port C
drivers/gpu/drm/i915/intel_dsi_cabc.c line 112
Quoted 11 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +11
-0+u8 data[2 ] = {0 }; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) {
Same comment .Put the below logic into static inline function returning enum port .
drivers/gpu/drm/i915/intel_dsi_cabc.c line 116
Quoted 4 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +4
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ;
Also below condition need not be taken into the inline function. Since it is dual link and with other conditions are met, then CABC_PORT_A_AND_C will be automatically taken care for both ports by the for_each_dsi_port macro. Within for_each_dsi_port, just check for intel_dsi->dl_cabc_port != CABC_PORT_A_AND_C, if yes call the inline function to get the port no and if no, all other conditions will be taken care for both ports by for_each_dsi_port. Before the end of for_each_dsi_port ,you may require to check the intel_dsi->dl_cabc_port != CABC_PORT_A_AND_C , so that you can return from the macro.
drivers/gpu/drm/i915/intel_dsi_cabc.c line 130
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + + do {
same comment as above. Use for_each_dsi_port
Quoted 15 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +15
-0+ dsi_device = intel_dsi->dsi_hosts[port]->device; + + + data[0 ] =MIPI_DCS_CABC_CONTROL_BRIGHT_WR ; + data[1 ] =CABC_BACKLIGHT |CABC_DIMMING_DISPLAY |CABC_BCTRL ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + data[0 ] =MIPI_DCS_CABC_CONTROL_WR ; + data[1 ] =CABC_VIDEO_MODE ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); + +cabc_set_backlight (connector, panel->backlight.level);
drivers/gpu/drm/i915/intel_dsi_cabc.c line 197
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+} + +void cabc_disable_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +enum port port =PORT_A ;
Will fail for single link Port C
drivers/gpu/drm/i915/intel_dsi_cabc.c line 112
Quoted 11 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +11
-0+u8 data[2 ] = {0 }; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) {
Same comment as above. Use static inline function for this.
drivers/gpu/drm/i915/intel_dsi_cabc.c line 130
Quoted 13 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +13
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + + do {
Use for_each_dsi_port macro
Quoted 226 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +128
-0+ dsi_device = intel_dsi->dsi_hosts[port]->device; + +cabc_set_backlight (connector,0 ); + data[1 ] =CABC_OFF ; + data[0 ] =MIPI_DCS_CABC_CONTROL_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + data[0 ] =MIPI_DCS_CABC_CONTROL_BRIGHT_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); +} + +static int cabc_backlight_device_update_status (struct backlight_device *bd) +{ +struct intel_connector *connector =bl_get_data (bd); +struct intel_panel *panel = &connector->panel; +struct drm_device *dev = connector->base.dev; + +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); +DRM_DEBUG_KMS ("updating intel_backlight, brightness=%d/%d\n" , + bd->props.brightness, bd->props.max_brightness); +cabc_set_backlight (connector, bd->props.brightness); + +/* +* Allow flipping bl_power as a sub-state of enabled. Sadly the +* backlight class device does not make it easy to to differentiate +* between callbacks for brightness and bl_power, so our backlight_power +* callback needs to take this into account. +*/ +if (panel->backlight.enabled) { +if (panel->backlight_power) { +bool enable = bd->props.power ==FB_BLANK_UNBLANK && + bd->props.brightness !=0 ; + panel->backlight_power (connector, enable); + } + }else { + bd->props.power =FB_BLANK_POWERDOWN ; + } + +drm_modeset_unlock (&dev->mode_config.connection_mutex); +return 0 ; +} + +static int cabc_backlight_device_get_brightness (struct backlight_device *bd) +{ +struct intel_connector *connector =bl_get_data (bd); +struct drm_device *dev = connector->base.dev; +struct drm_i915_private *dev_priv = dev->dev_private; +int ret; + +intel_runtime_pm_get (dev_priv); +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); + + ret =cabc_get_backlight (connector); + +drm_modeset_unlock (&dev->mode_config.connection_mutex); +intel_runtime_pm_put (dev_priv); + +return ret; +} + +static const struct backlight_ops cabc_backlight_device_ops = { + .update_status = cabc_backlight_device_update_status, + .get_brightness = cabc_backlight_device_get_brightness, +}; + +int cabc_backlight_device_register (struct intel_connector *connector) +{ +struct intel_panel *panel = &connector->panel; +struct backlight_properties props; + +if (WARN_ON (panel->backlight.device)) +return -ENODEV ; + +if (!panel->backlight.present) +return 0 ; + +WARN_ON (panel->backlight.max ==0 ); + +memset (&props,0 ,sizeof (props)); + props.type =BACKLIGHT_FIRMWARE ; + +/* +* Note: Everything should work even if the backlight device max +* presented to the userspace is arbitrarily chosen. +*/ + props.max_brightness = panel->backlight.max; + props.brightness = props.max_brightness; + +if (panel->backlight.enabled) + props.power =FB_BLANK_UNBLANK ; +else + props.power =FB_BLANK_POWERDOWN ; + +/* +* Note: using the same name independent of the connector prevents +* registration of multiple backlight devices in the driver. +*/ + panel->backlight.device = +backlight_device_register ("intel_backlight" , + connector->base.kdev, + connector, + &cabc_backlight_device_ops, &props); + +if (IS_ERR (panel->backlight.device)) { +DRM_ERROR ("Failed to register backlight: %ld\n" , +PTR_ERR (panel->backlight.device)); + panel->backlight.device =NULL ; +return -ENODEV ; + } + +DRM_DEBUG_KMS ("Connector %s backlight sysfs interface registered\n" , + connector->base.name); + +return 0 ; +} + +void cabc_backlight_device_unregister (struct intel_connector *connector) +{ +struct intel_panel *panel = &connector->panel; + +if (panel->backlight.device) { +backlight_device_unregister (panel->backlight.device); + panel->backlight.device =NULL ; + } +}drivers/gpu/drm/i915/intel_dsi_cabc.h new file +45
-0@@ -0,0 +1,45 @@ +/* +* Copyright © 2013 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a +* copy of this software and associated documentation files (the "Software"), +* to deal in the Software without restriction, including without limitation +* the rights to use, copy, modify, merge, publish, distribute, sublicense, +* and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice (including the next +* paragraph) shall be included in all copies or substantial portions of the +* Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +* DEALINGS IN THE SOFTWARE. +* +*/ + +extern int cabc_backlight_device_register (struct intel_connector *connector); +extern void cabc_backlight_device_unregister (struct intel_connector *connector); +void cabc_set_backlight (struct intel_connector *connector,u32 level); +u32 cabc_get_backlight (struct intel_connector *connector); +void cabc_enable_backlight (struct intel_connector *connector); +void cabc_disable_backlight (struct intel_connector *connector); +int cabc_setup_backlight (struct intel_connector *connector,enum pipe unused); + +#define CABC_OFF (0 << 0) +#define CABC_USER_INTERFACE_IMAGE (1 << 0) +#define CABC_STILL_PICTURE (2 << 0) +#define CABC_VIDEO_MODE (3 << 0) + +#define CABC_BACKLIGHT (1 << 2) +#define CABC_DIMMING_DISPLAY (1 << 3) +#define CABC_BCTRL (1 << 5) + +#define CABC_PORT_A 0x00 +#define CABC_PORT_C 0x01 +#define CABC_PORT_A_AND_C 0x02 +#define CABC_MAX_VALUE 0xffdrivers/gpu/drm/i915/intel_panel.c +18
-4@@ -1502,15 +1502,29 @@ void intel_panel_fini(struct intel_panel *panel)void intel_backlight_register (struct drm_device *dev) {struct intel_connector *connector; +struct drm_i915_private *dev_priv = dev->dev_private; -list_for_each_entry (connector, &dev->mode_config.connector_list, base.head) -intel_backlight_device_register (connector); +list_for_each_entry (connector, &dev->mode_config.connector_list, + base.head) { +if (connector->encoder->type ==INTEL_OUTPUT_DSI && + dev_priv->vbt.dsi.config->cabc_supported) +cabc_backlight_device_register (connector); +else +intel_backlight_device_register (connector); + } }void intel_backlight_unregister (struct drm_device *dev) {struct intel_connector *connector; +struct drm_i915_private *dev_priv = dev->dev_private; -list_for_each_entry (connector, &dev->mode_config.connector_list, base.head) -intel_backlight_device_unregister (connector); +list_for_each_entry (connector, &dev->mode_config.connector_list, + base.head) { +if (connector->encoder->type ==INTEL_OUTPUT_DSI && + dev_priv->vbt.dsi.config->cabc_supported) +cabc_backlight_device_unregister (connector); +else +intel_backlight_device_unregister (connector); + } }include/video/mipi_display.h +1
-0@@ -117,6 +117,14 @@ enum {MIPI_DCS_GET_SCANLINE =0x45 ,MIPI_DCS_READ_DDB_START =0xA1 ,MIPI_DCS_READ_DDB_CONTINUE =0xA8 , + MIPI_DCS_CABC_LEVEL_RD = 0x52,
include/video/mipi_display.h enum { · line 130
Quoted 10 lines
include/video/mipi_display.h +7
-0+MIPI_DCS_CABC_MIN_BRIGHTNESS_RD =0x5F , +MIPI_DCS_CABC_CONTROL_RD =0x56 , +MIPI_DCS_CABC_CONTROL_BRIGHT_RD =0x54 , +MIPI_DCS_CABC_LEVEL_WR =0x51 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_WR =0x5E , +MIPI_DCS_CABC_CONTROL_WR =0x55 , + MIPI_DCS_CABC_CONTROL_BRIGHT_WR = 0x53, };/* MIPI DCS pixel formats */
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Re: [RFC CABC PATCH v2 3/3] drm/i915: CABC support for backlight control
Quoted 603 lines · Gaurav K
Quoted 168 lines · Deepak M
In CABC (Content Adaptive Brightness Control) content grey level scale can be increased while simultaneously decreasing brightness of the backlight to achieve same perceived brightness.
The CABC is not standardized and panel vendors are free to follow their implementation. The CABC implementaion here assumes that the panels use standard SW register for control.
In this design there will be no PWM signal from the SoC and DCS commands are sent to enable and control the backlight brightness.
v2:
- Created a new backlight driver for cabc, which will be registered only when it cabc is supported by panel.
(Addressed comment from Daniel Vetter)Signed-off-by Deepak M <[email protected]>--- drivers/gpu/drm/i915/Makefile | 1 + drivers/gpu/drm/i915/intel_drv.h | 3 +- drivers/gpu/drm/i915/intel_dsi.c | 13 ++ drivers/gpu/drm/i915/intel_dsi_cabc.c | 349 +++++++++++++++++++++++++++++++++ drivers/gpu/drm/i915/intel_dsi_cabc.h | 45 +++++ drivers/gpu/drm/i915/intel_panel.c | 22 ++- include/video/mipi_display.h | 8 + 7 files changed, 436 insertions(+), 5 deletions(-)create mode 100644
drivers/gpu/drm/i915/intel_dsi_cabc.ccreate mode 100644drivers/gpu/drm/i915/intel_dsi_cabc.hdrivers/gpu/drm/i915/Makefile +1
-0@@ -75,6 +75,7 @@ i915-y += dvo_ch7017.o \ intel_dp_mst.o \ intel_dsi.o \ intel_dsi_pll.o \ + intel_dsi_cabc.o \ intel_dsi_panel_vbt.o \ intel_dvo.o \ intel_hdmi.o \drivers/gpu/drm/i915/intel_drv.h +2
-1@@ -1319,7 +1319,8 @@ extern struct drm_display_mode *intel_find_panel_downclock ( struct drm_connector *connector);void intel_backlight_register (struct drm_device *dev);void intel_backlight_unregister (struct drm_device *dev); - +extern int cabc_backlight_device_register (struct intel_connector *connector); +extern void cabc_backlight_device_unregister (struct intel_connector *connector);/* intel_psr.c */void
intel_psr_enable(struct intel_dp *intel_dp);drivers/gpu/drm/i915/intel_dsi.c +11
-0@@ -34,6 +34,7 @@#include "i915_drv.h" #include "intel_drv.h" #include "intel_dsi.h" +#include "intel_dsi_cabc.h" static const struct { u16 panel_id;@@ -376,6 +377,7 @@ static void intel_dsi_enable(struct intel_encoder *encoder)struct drm_device *dev = encoder->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +struct intel_connector *connector = intel_dsi->attached_connector;enum port port;DRM_DEBUG_KMS ("\n" );@@ -396,6 +398,9 @@ static void intel_dsi_enable(struct intel_encoder *encoder)intel_dsi_port_enable (encoder); } + +if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_enable_backlight (connector); }static void intel_dsi_pre_enable (struct intel_encoder *encoder)@@ -469,11 +474,15 @@ static void intel_dsi_disable(struct intel_encoder *encoder)struct drm_device *dev = encoder->base.dev;struct drm_i915_private *dev_priv = dev->dev_private;struct intel_dsi *intel_dsi =enc_to_intel_dsi (&encoder->base); +struct intel_connector *connector = intel_dsi->attached_connector;enum port port;u32 temp;DRM_DEBUG_KMS ("\n" ); + if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_disable_backlight (connector); +if (is_vid_mode (intel_dsi)) {for_each_dsi_port (port, intel_dsi->ports)wait_for_dsi_fifo_empty (intel_dsi, port);@@ -1099,6 +1108,10 @@ void intel_dsi_init(struct drm_device *dev)intel_panel_init (&intel_connector->panel, fixed_mode,NULL ); + if (dev_priv->vbt.dsi.config->cabc_supported) +cabc_setup_backlight (connector, + intel_encoder->crtc_mask == + (1 <<PIPE_A ) ?PIPE_A :PIPE_B );return ; err:drivers/gpu/drm/i915/intel_dsi_cabc.c new file +4
-0@@ -0,0 +1,349 @@ +/* +* Copyright © 2006-2010 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */drivers/gpu/drm/i915/intel_dsi_cabc.c new file +18
-0+ +#include <linux/kernel.h> +#include <linux/moduleparam.h> +#include "intel_drv.h" +#include "intel_dsi.h" +#include "i915_drv.h" +#include "intel_dsi_cabc.h" +#include <video/mipi_display.h> +#include <drm/drm_mipi_dsi.h> + +int cabc_setup_backlight (struct intel_connector *connector, +enum pipe unused) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct intel_panel *panel = &connector->panel;drivers/gpu/drm/i915/intel_dsi_cabc.c line 51
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+struct mipi_dsi_device *dsi_device; +u8 level; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + dsi_device = intel_dsi->dsi_hosts[0 ]->device;This will work only for MIPI Port A not for MIPI Port C. Use
for_each_dsi_portmacro and intel_dsi->dsi_hosts[port] to correctly reach tomipi_dsi_devicefor both ports. If it is dual link, break after the completion of the first iteration.Quoted 7 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +7
-0+ panel->backlight.max =CABC_MAX_VALUE ; + panel->backlight.level =CABC_MAX_VALUE ; + level =CABC_MAX_VALUE ; + panel->backlight.enabled = true; +return 0 ; +} +drivers/gpu/drm/i915/intel_dsi_cabc.c line 68
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+u32 cabc_get_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +struct intel_panel *panel = &connector->panel; +u8 data[2 ] = {0 }; +enum port port =PORT_A ;will fail for single link MIPI Port C.
drivers/gpu/drm/i915/intel_dsi_cabc.c line 77
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+u32 ret; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } +if (intel_dsi->dual_link) {Put the below or required logic into static inline function returning enum port .
drivers/gpu/drm/i915/intel_dsi_cabc.c line 83
Quoted 6 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +6
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A || + intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; + }Use
for_each_dsi_portmacro here . call the inline function withinfor_each_dsi_portmacro to get the required enum port for dual link.Quoted 19 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +19
-0+ + dsi_device = intel_dsi->dsi_hosts[port]->device; +mipi_dsi_dcs_read (dsi_device,MIPI_DCS_CABC_LEVEL_RD , data,2 ); + + ret = (data[1 ] * panel->backlight.max) /255 ; +return ret; +} + +void cabc_set_backlight (struct intel_connector *connector,u32 level) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +u8 data[2 ] = {0 }; +enum port port =PORT_A ; +struct intel_panel *panel = &connector->panel; +u8 count =1 ;drivers/gpu/drm/i915/intel_dsi_cabc.c line 112
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+u32 hw_level; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) {Put the below logic into static inline function returning enum port .
drivers/gpu/drm/i915/intel_dsi_cabc.c line 120
Quoted 8 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +8
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } +Below part not required. use
for_each_dsi_portmacro.drivers/gpu/drm/i915/intel_dsi_cabc.c line 129
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + + + hw_level = level % (panel->backlight.max +1 ); + hw_level = (hw_level *255 ) / panel->backlight.max; + panel->backlight.level = hw_level; +Use
for_each_dsi_portmacro as explained above.Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+do { + dsi_device = intel_dsi->dsi_hosts[port]->device; + data[1 ] = hw_level; + data[0 ] =MIPI_DCS_CABC_LEVEL_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); +}drivers/gpu/drm/i915/intel_dsi_cabc.c line 148
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+ +void cabc_enable_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct intel_panel *panel = &connector->panel; +struct mipi_dsi_device *dsi_device; +enum port port =PORT_A ;Will fail for single link Port C
drivers/gpu/drm/i915/intel_dsi_cabc.c line 112
Quoted 11 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +11
-0+u8 data[2 ] = {0 }; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) {Same comment .Put the below logic into static inline function returning enum port .
drivers/gpu/drm/i915/intel_dsi_cabc.c line 116
Quoted 4 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +4
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ;Also below condition need not be taken into the inline function. Since it is dual link and with other conditions are met, then
CABC_PORT_A_AND_Cwill be automatically taken care for both ports by thefor_each_dsi_portmacro. Withinfor_each_dsi_port, just check forintel_dsi->dl_cabc_port!=CABC_PORT_A_AND_C, if yes call the inline function to get the port no and if no, all other conditions will be taken care for both ports byfor_each_dsi_port. Before the end offor_each_dsi_port,you may require to check theintel_dsi->dl_cabc_port!=CABC_PORT_A_AND_C, so that you can return from the macro.drivers/gpu/drm/i915/intel_dsi_cabc.c line 130
Quoted 9 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +9
-0+else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + + do {same comment as above. Use
for_each_dsi_portQuoted 15 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +15
-0+ dsi_device = intel_dsi->dsi_hosts[port]->device; + + + data[0 ] =MIPI_DCS_CABC_CONTROL_BRIGHT_WR ; + data[1 ] =CABC_BACKLIGHT |CABC_DIMMING_DISPLAY |CABC_BCTRL ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + data[0 ] =MIPI_DCS_CABC_CONTROL_WR ; + data[1 ] =CABC_VIDEO_MODE ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); + +cabc_set_backlight (connector, panel->backlight.level);drivers/gpu/drm/i915/intel_dsi_cabc.c line 197
Quoted 10 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +10
-0+} + +void cabc_disable_backlight (struct intel_connector *connector) +{ +struct drm_device *dev = connector->base.dev; +struct intel_dsi *intel_dsi =NULL ; +struct drm_crtc *crtc =NULL ; +struct intel_encoder *encoder =NULL ; +struct mipi_dsi_device *dsi_device; +enum port port =PORT_A ;Will fail for single link Port C
drivers/gpu/drm/i915/intel_dsi_cabc.c line 112
Quoted 11 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +11
-0+u8 data[2 ] = {0 }; +u8 count =1 ; + +list_for_each_entry (crtc, &dev->mode_config.crtc_list, head) { +for_each_encoder_on_crtc (dev, crtc, encoder) { +if (encoder->type ==INTEL_OUTPUT_DSI ) + intel_dsi =enc_to_intel_dsi (&encoder->base); + } + } + +if (intel_dsi->dual_link) {Same comment as above. Use static inline function for this.
drivers/gpu/drm/i915/intel_dsi_cabc.c line 130
Quoted 13 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +13
-0+if (intel_dsi->dl_cabc_port ==CABC_PORT_A ) + port =PORT_A ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_C ) + port =PORT_C ; +else if (intel_dsi->dl_cabc_port ==CABC_PORT_A_AND_C ) + port =PORT_A ; + } + +if (intel_dsi->dual_link && intel_dsi->dl_cabc_port == +CABC_PORT_A_AND_C ) + count =2 ; + + do {Use
for_each_dsi_portmacroQuoted 236 lines
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +15
-0+ dsi_device = intel_dsi->dsi_hosts[port]->device; + +cabc_set_backlight (connector,0 ); + data[1 ] =CABC_OFF ; + data[0 ] =MIPI_DCS_CABC_CONTROL_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + data[0 ] =MIPI_DCS_CABC_CONTROL_BRIGHT_WR ; +mipi_dsi_dcs_write_buffer (dsi_device, data,2 ); + +if (count ==2 ) + port =PORT_C ; + }while (--count >0 ); +} + +static int cabc_backlight_device_update_status(struct
backlight_device*bd)drivers/gpu/drm/i915/intel_dsi_cabc.c new file +14
-0+{ +struct intel_connector *connector =bl_get_data (bd); +struct intel_panel *panel = &connector->panel; +struct drm_device *dev = connector->base.dev; + +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); +DRM_DEBUG_KMS ("updating intel_backlight, brightness=%d/%d\n" , + bd->props.brightness, bd->props.max_brightness); +cabc_set_backlight (connector, bd->props.brightness); + +/* +* Allow flipping bl_power as a sub-state of enabled. Sadly the +* backlight class device does not make it easy to to differentiate +* between callbacks for brightness and bl_power, so our
backlight_powerdrivers/gpu/drm/i915/intel_dsi_cabc.c new file +17
-0+* callback needs to take this into account. +*/ +if (panel->backlight.enabled) { +if (panel->backlight_power) { +bool enable = bd->props.power ==FB_BLANK_UNBLANK && + bd->props.brightness !=0 ; + panel->backlight_power (connector, enable); + } + }else { + bd->props.power =FB_BLANK_POWERDOWN ; + } + +drm_modeset_unlock (&dev->mode_config.connection_mutex); +return 0 ; +} + +static int cabc_backlight_device_get_brightness(struct
backlight_device*bd)drivers/gpu/drm/i915/intel_dsi_cabc.c new file +68
-0+{ +struct intel_connector *connector =bl_get_data (bd); +struct drm_device *dev = connector->base.dev; +struct drm_i915_private *dev_priv = dev->dev_private; +int ret; + +intel_runtime_pm_get (dev_priv); +drm_modeset_lock (&dev->mode_config.connection_mutex,NULL ); + + ret =cabc_get_backlight (connector); + +drm_modeset_unlock (&dev->mode_config.connection_mutex); +intel_runtime_pm_put (dev_priv); + +return ret; +} + +static const struct backlight_ops cabc_backlight_device_ops = { + .update_status = cabc_backlight_device_update_status, + .get_brightness = cabc_backlight_device_get_brightness, +}; + +int cabc_backlight_device_register (struct intel_connector *connector) +{ +struct intel_panel *panel = &connector->panel; +struct backlight_properties props; + +if (WARN_ON (panel->backlight.device)) +return -ENODEV ; + +if (!panel->backlight.present) +return 0 ; + +WARN_ON (panel->backlight.max ==0 ); + +memset (&props,0 ,sizeof (props)); + props.type =BACKLIGHT_FIRMWARE ; + +/* +* Note: Everything should work even if the backlight device max +* presented to the userspace is arbitrarily chosen. +*/ + props.max_brightness = panel->backlight.max; + props.brightness = props.max_brightness; + +if (panel->backlight.enabled) + props.power =FB_BLANK_UNBLANK ; +else + props.power =FB_BLANK_POWERDOWN ; + +/* +* Note: using the same name independent of the connector prevents +* registration of multiple backlight devices in the driver. +*/ + panel->backlight.device = +backlight_device_register ("intel_backlight" , + connector->base.kdev, + connector, + &cabc_backlight_device_ops, &props); + +if (IS_ERR (panel->backlight.device)) { +DRM_ERROR ("Failed to register backlight: %ld\n" , +PTR_ERR (panel->backlight.device)); + panel->backlight.device =NULL ; +return -ENODEV ; + } + + DRM_DEBUG_KMS("Connector %s backlight sysfs interfaceregistered\n",
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +6
-0+ connector->base.name); + +return 0 ; +} + +void cabc_backlight_device_unregister(struct intel_connector*connector)
drivers/gpu/drm/i915/intel_dsi_cabc.c new file +8
-0+{ +struct intel_panel *panel = &connector->panel; + +if (panel->backlight.device) { +backlight_device_unregister (panel->backlight.device); + panel->backlight.device =NULL ; + } +}drivers/gpu/drm/i915/intel_dsi_cabc.h new file +4
-0@@ -0,0 +1,45 @@ +/* +* Copyright © 2013 Intel Corporation +* +* Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+ * DEALINGS IN THE SOFTWARE.
+ *
+ */drivers/gpu/drm/i915/intel_dsi_cabc.h new file +2
-0+ +extern int cabc_backlight_device_register(struct intel_connector*connector);
+extern voidcabc_backlight_device_unregister(struct intel_connector *connector);drivers/gpu/drm/i915/intel_dsi_cabc.h new file +5
-0+void cabc_set_backlight (struct intel_connector *connector,u32 level); +u32 cabc_get_backlight (struct intel_connector *connector); +void cabc_enable_backlight (struct intel_connector *connector); +void cabc_disable_backlight (struct intel_connector *connector); +int cabc_setup_backlight(struct intel_connector *connector, enumpipe unused);
drivers/gpu/drm/i915/intel_dsi_cabc.h new file +14
-0+ +#define CABC_OFF (0 << 0) +#define CABC_USER_INTERFACE_IMAGE (1 << 0) +#define CABC_STILL_PICTURE (2 << 0) +#define CABC_VIDEO_MODE (3 << 0) + +#define CABC_BACKLIGHT (1 << 2) +#define CABC_DIMMING_DISPLAY (1 << 3) +#define CABC_BCTRL (1 << 5) + +#define CABC_PORT_A 0x00 +#define CABC_PORT_C 0x01 +#define CABC_PORT_A_AND_C 0x02 +#define CABC_MAX_VALUE 0xffdrivers/gpu/drm/i915/intel_panel.c +18
-2@@ -1502,15 +1502,29 @@ void intel_panel_fini(struct intel_panel *panel)void intel_backlight_register (struct drm_device *dev) {struct intel_connector *connector; +struct drm_i915_private *dev_priv = dev->dev_private; -list_for_each_entry (connector, &dev->mode_config.connector_list, base.head) -intel_backlight_device_register (connector); +list_for_each_entry (connector, &dev->mode_config.connector_list, + base.head) { +if (connector->encoder->type ==INTEL_OUTPUT_DSI && + dev_priv->vbt.dsi.config->cabc_supported) +cabc_backlight_device_register (connector); +else +intel_backlight_device_register (connector); + } }void intel_backlight_unregister (struct drm_device *dev) {struct intel_connector *connector; +struct drm_i915_private *dev_priv = dev->dev_private; -list_for_each_entry (connector, &dev->mode_config.connector_list, base.head) -intel_backlight_device_unregister (connector); +list_for_each_entry (connector, &dev->mode_config.connector_list, + base.head) { +if (connector->encoder->type ==INTEL_OUTPUT_DSI && + dev_priv->vbt.dsi.config->cabc_supported) +cabc_backlight_device_unregister (connector); +else +intel_backlight_device_unregister (connector); + } }
Quoted 8 lines
include/video/mipi_display.h enum { · line 119
Quoted 8 lines
include/video/mipi_display.h +0
-0@@ -117,6 +117,14 @@ enum {MIPI_DCS_GET_SCANLINE =0x45 ,MIPI_DCS_READ_DDB_START =0xA1 , MIPI_DCS_READ_DDB_CONTINUE = 0xA8,
Please add them in increment order. Also, in HLD it is mentioned that offset for MIPI_DCS_CABC_LEVEL_RD is 0x51. Correct either of them accordingly.
Quoted 11 lines
include/video/mipi_display.h enum { · line 130
Quoted 10 lines
include/video/mipi_display.h +8
-0+MIPI_DCS_CABC_LEVEL_RD =0x52 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_RD =0x5F , +MIPI_DCS_CABC_CONTROL_RD =0x56 , +MIPI_DCS_CABC_CONTROL_BRIGHT_RD =0x54 , +MIPI_DCS_CABC_LEVEL_WR =0x51 , +MIPI_DCS_CABC_MIN_BRIGHTNESS_WR =0x5E , +MIPI_DCS_CABC_CONTROL_WR =0x55 , + MIPI_DCS_CABC_CONTROL_BRIGHT_WR = 0x53, };/* MIPI DCS pixel formats */
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx