FAILED: patch "[PATCH] megaraid_sas : Modify return value of" failed to apply to 4.1-stable tree
Subsystems (3)
[email protected]
maintainerThe patch below does not apply to the 4.1-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
Quoted 1 line
From
2be2a98845e6742a96d48534294d2c5ba582e57fMon Sep 17 00:00:00 2001
From: "[email protected]" <[email protected]>
Date: Wed, 6 May 2015 19:01:02 +0530
Subject: [PATCH] megaraid_sas : Modify return value of
megasas_issue_blocked_cmd() and wait_and_poll() to consider command status returned by firmware
This patch is rebased on top of recently sent 18 patches(submitted by me) for megaraid_sas driver.
Change the return value of wait_and_poll() and megsas_issue_blocked_cmd() based on MFI_STAT returned by firmware for that command. Earlier driver always send return type based on command completion (but never check MFI_STAT_OK for that command), so even if command is failed by firmware still driver will return SUCCESS status from these functions wait_and_poll() and megsas_issue_blocked_cmd() and if caller of these functions does not check command status (MFI_STAT), then it may endup using invalid data returned in DMA buffers(one of the example is megasas_ld_list_query DCMD). Best thing to avoid this type of issue is do error handling and set proper return type from caller function wait_and_poll() and megsas_issue_blocked_cmd().
The change proposed in this patch will fix the regression introduced in patch- "90dc9d9 megaraid_sas : MFI MPT linked list corruption fix" inside function megasas_ld_list_query(). Prior to this MFI MPT linked list corruption fix patch, megasas_ld_list_query() function used to check DCMD status(returned by firmware) but with this linked list corruption fix patch, DCMD status will not be checked inside function megasas_ld_list_query() and introduced this issue of wrong data being used by function megasas_ld_list_query().
drivers/scsi/megaraid/megaraid_sas.h +1 -1
@@ -1894,7 +1894,7 @@ struct megasas_cmd {u32 index;u8 sync_cmd; -u8 cmd_status; +u8 cmd_status_drv;u8 abort_aen;u8 retry_for_fw_reset;
drivers/scsi/megaraid/megaraid_sas_base.c +27 -40
196 lines not on this page · raw message
drivers/scsi/megaraid/megaraid_sas_fusion.c +2 -1
@@ -584,7 +584,8 @@ wait_and_poll(struct megasas_instance *instance, struct megasas_cmd *cmd,if (frame_hdr->cmd_status ==0xff )return -ETIME ; -return 0 ; +return (frame_hdr->cmd_status ==MFI_STAT_OK ) ? +0 :1 ; }/**