Skip to contentSkip to conversation

x86/fpu: Fix FPU context sizing boot regression, introduce dynamic task_struct

PATCH In review Ingo Molnar 4 participants 9 messages Jul 17, 2015 – Jul 18, 2015

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

cover x86/fpu: Fix FPU context sizing boot regression, introduce dynamic task_struct

This series builds on top of Dave Hansen's initial patch that introduced dynamic task_struct sizing.

The second patch improves the dynamic allocation to not impact non-x86 architectures, and to make it a bit faster on x86.

( I kept the structure layout build checks in x86 code for the time being,
because some of the cross-builds failed with the generic check and I didn't want to introduce a bigger cross section for any failures. And it's not like we'll apply generic sched.h changes without testing x86. )

Thanks,

Ingo

==========================>

Dave Hansen (1):
x86/fpu, fork: Dynamically allocate 'struct fpu'

Ingo Molnar (1):
x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and
use it on x86

 arch/Kconfig                     |  4 ++++
 arch/x86/Kconfig                 |  1 +
 arch/x86/include/asm/fpu/types.h | 72 ++++++++++++++++++++++++++++++++----------------------------
 arch/x86/include/asm/processor.h | 10 ++++++---
 arch/x86/kernel/fpu/init.c       | 40 +++++++++++++++++++++++++++++++++
 arch/x86/kernel/process.c        |  2 +-
 fs/proc/kcore.c                  |  4 ++--
 include/linux/sched.h            | 16 ++++++++++++--
 kernel/fork.c                    |  7 +++++-
 9 files changed, 113 insertions(+), 43 deletions(-)
Signature · 1 line
2.1.4
#1 lore raw

PATCH 1/2 x86/fpu, fork: Dynamically allocate 'struct fpu'

From: Dave Hansen <[email protected]>

The FPU rewrite removed the dynamic allocations of 'struct fpu'. But, this potentially wastes massive amounts of memory (2k per task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the space that we need to the 'task_struct' which we dynamically allocate already. This saves from doing an extra slab allocation at fork().

The only real downside here is that we have to stick everything and the end of the task_struct. But, I think the BUILD_BUG_ON()s I stuck in there should keep that from being too fragile.

Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/x86/include/asm/fpu/types.h | 72 ++++++++++++++++++++++++++++++++----------------------------
 arch/x86/include/asm/processor.h | 10 ++++++---
 arch/x86/kernel/fpu/init.c       | 39 ++++++++++++++++++++++++++++++++
 arch/x86/kernel/process.c        |  2 +-
 fs/proc/kcore.c                  |  4 ++--
 include/linux/sched.h            | 12 ++++++++--
 kernel/fork.c                    |  8 ++++++-
 7 files changed, 104 insertions(+), 43 deletions(-)
arch/x86/include/asm/fpu/types.h +38 -34
index 0637826292de..c49c5173158e 100644
@@ -189,6 +189,7 @@ union fpregs_state {
 	struct fxregs_state		fxsave;
 	struct swregs_state		soft;
 	struct xregs_state		xsave;
+	u8 __padding[PAGE_SIZE];
 };
 
 /*
@@ -198,40 +199,6 @@ union fpregs_state {
  */
 struct fpu {
 	/*
-	 * @state:
-	 *
-	 * In-memory copy of all FPU registers that we save/restore
-	 * over context switches. If the task is using the FPU then
-	 * the registers in the FPU are more recent than this state
-	 * copy. If the task context-switches away then they get
-	 * saved here and represent the FPU state.
-	 *
-	 * After context switches there may be a (short) time period
-	 * during which the in-FPU hardware registers are unchanged
-	 * and still perfectly match this state, if the tasks
-	 * scheduled afterwards are not using the FPU.
-	 *
-	 * This is the 'lazy restore' window of optimization, which
-	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
-	 *
-	 * We detect whether a subsequent task uses the FPU via setting
-	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
-	 *
-	 * During this window, if the task gets scheduled again, we
-	 * might be able to skip having to do a restore from this
-	 * memory buffer to the hardware registers - at the cost of
-	 * incurring the overhead of #NM fault traps.
-	 *
-	 * Note that on modern CPUs that support the XSAVEOPT (or other
-	 * optimized XSAVE instructions), we don't use #NM traps anymore,
-	 * as the hardware can track whether FPU registers need saving
-	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
-	 * logic, which unconditionally saves/restores all FPU state
-	 * across context switches. (if FPU state exists.)
-	 */
-	union fpregs_state		state;
-
-	/*
 	 * @last_cpu:
 	 *
 	 * Records the last CPU on which this context was loaded into
@@ -288,6 +255,43 @@ struct fpu {
 	 * deal with bursty apps that only use the FPU for a short time:
 	 */
 	unsigned char			counter;
+	/*
+	 * @state:
+	 *
+	 * In-memory copy of all FPU registers that we save/restore
+	 * over context switches. If the task is using the FPU then
+	 * the registers in the FPU are more recent than this state
+	 * copy. If the task context-switches away then they get
+	 * saved here and represent the FPU state.
+	 *
+	 * After context switches there may be a (short) time period
+	 * during which the in-FPU hardware registers are unchanged
+	 * and still perfectly match this state, if the tasks
+	 * scheduled afterwards are not using the FPU.
+	 *
+	 * This is the 'lazy restore' window of optimization, which
+	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
+	 *
+	 * We detect whether a subsequent task uses the FPU via setting
+	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
+	 *
+	 * During this window, if the task gets scheduled again, we
+	 * might be able to skip having to do a restore from this
+	 * memory buffer to the hardware registers - at the cost of
+	 * incurring the overhead of #NM fault traps.
+	 *
+	 * Note that on modern CPUs that support the XSAVEOPT (or other
+	 * optimized XSAVE instructions), we don't use #NM traps anymore,
+	 * as the hardware can track whether FPU registers need saving
+	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
+	 * logic, which unconditionally saves/restores all FPU state
+	 * across context switches. (if FPU state exists.)
+	 */
+	union fpregs_state		state;
+	/*
+	 * WARNING: 'state' is dynamically-sized.  Do not put
+	 * anything after it here.
+	 */
 };
 
 #endif /* _ASM_X86_FPU_H */
arch/x86/include/asm/processor.h +7 -3
index 43e6519df0d5..944f1785ed0d 100644
@@ -390,9 +390,6 @@ struct thread_struct {
 #endif
 	unsigned long		gs;
 
-	/* Floating point and extended processor state */
-	struct fpu		fpu;
-
 	/* Save middle states of ptrace breakpoints */
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
@@ -418,6 +415,13 @@ struct thread_struct {
 	unsigned long		iopl;
 	/* Max allowed port in the bitmap, in bytes: */
 	unsigned		io_bitmap_max;
+
+	/* Floating point and extended processor state */
+	struct fpu		fpu;
+	/*
+	 * WARNING: 'fpu' is dynamically-sized.  It *MUST* be at
+	 * the end.
+	 */
 };
 
 /*
arch/x86/kernel/fpu/init.c +39 -0
index 32826791e675..deacbfa6b33e 100644
@@ -136,6 +136,45 @@ static void __init fpu__init_system_generic(void)
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
+#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER)	\
+	BUILD_BUG_ON((sizeof(TYPE) -			\
+			offsetof(TYPE, MEMBER) -	\
+			sizeof(((TYPE *)0)->MEMBER)) > 	\
+			0)				\
+
+/*
+ * We append the 'struct fpu' to the task_struct.
+ */
+int __weak arch_task_struct_size(void)
+{
+	int task_size = sizeof(struct task_struct);
+
+	/*
+	 * Subtract off the static size of the register state.
+	 * It potentially has a bunch of padding.
+	 */
+	task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state);
+
+	/*
+	 * Add back the dynamically-calculated register state
+	 * size.
+	 */
+	task_size += xstate_size;
+
+	/*
+	 * We dynamically size 'struct fpu', so we require that
+	 * it be at the end of 'thread_struct' and that
+	 * 'thread_struct' be at the end of 'task_struct'.  If
+	 * you hit a compile error here, check the structure to
+	 * see if something got added to the end.
+	 */
+	CHECK_MEMBER_AT_END_OF(struct fpu, state);
+	CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
+	CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
+
+	return task_size;
+}
+
 /*
  * Set up the xstate_size based on the legacy FPU context size.
  *
arch/x86/kernel/process.c +1 -1
index 9cad694ed7c4..975420eac105 100644
@@ -81,7 +81,7 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister);
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	*dst = *src;
+	memcpy(dst, src, arch_task_struct_size());
 
 	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
 }
fs/proc/kcore.c +2 -2
index 91a4e6426321..a0fe99485687 100644
@@ -92,7 +92,7 @@ static size_t get_kcore_size(int *nphdr, size_t *elf_buflen)
 			     roundup(sizeof(CORE_STR), 4)) +
 			roundup(sizeof(struct elf_prstatus), 4) +
 			roundup(sizeof(struct elf_prpsinfo), 4) +
-			roundup(sizeof(struct task_struct), 4);
+			roundup(arch_task_struct_size(), 4);
 	*elf_buflen = PAGE_ALIGN(*elf_buflen);
 	return size + *elf_buflen;
 }
@@ -415,7 +415,7 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 	/* set up the task structure */
 	notes[2].name	= CORE_STR;
 	notes[2].type	= NT_TASKSTRUCT;
-	notes[2].datasz	= sizeof(struct task_struct);
+	notes[2].datasz	= arch_task_struct_size();
 	notes[2].data	= current;
 
 	nhdr->p_filesz	+= notesize(&notes[2]);
include/linux/sched.h +10 -2
index ae21f1591615..e43a41d892b6 100644
@@ -1522,8 +1522,6 @@ struct task_struct {
 /* hung task detection */
 	unsigned long last_switch_count;
 #endif
-/* CPU-specific state of this task */
-	struct thread_struct thread;
 /* filesystem information */
 	struct fs_struct *fs;
 /* open file information */
@@ -1778,8 +1776,18 @@ struct task_struct {
 	unsigned long	task_state_change;
 #endif
 	int pagefault_disabled;
+/* CPU-specific state of this task */
+	struct thread_struct thread;
+/*
+ * WARNING: on x86, 'thread_struct' contains a variable-sized
+ * structure.  It *MUST* be at the end of 'task_struct'.
+ *
+ * Do not put anything below here!
+ */
 };
 
+extern int arch_task_struct_size(void);
+
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
 #define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed)
 
kernel/fork.c +7 -1
index 1bfefc6f96a4..431b67a6098c 100644
@@ -287,15 +287,21 @@ static void set_max_threads(unsigned int max_threads_suggested)
 	max_threads = clamp_t(u64, threads, MIN_THREADS, MAX_THREADS);
 }
 
+int __weak arch_task_struct_size(void)
+{
+	return sizeof(struct task_struct);
+}
+
 void __init fork_init(void)
 {
+	int task_struct_size = arch_task_struct_size();
 #ifndef CONFIG_ARCH_TASK_STRUCT_ALLOCATOR
 #ifndef ARCH_MIN_TASKALIGN
 #define ARCH_MIN_TASKALIGN	L1_CACHE_BYTES
 #endif
 	/* create a slab on which task_structs can be allocated */
 	task_struct_cachep =
-		kmem_cache_create("task_struct", sizeof(struct task_struct),
+		kmem_cache_create("task_struct", task_struct_size,
 			ARCH_MIN_TASKALIGN, SLAB_PANIC | SLAB_NOTRACK, NULL);
 #endif
 
Signature · 1 line
2.1.4
#2 lore raw

Re: [PATCH 1/2] x86/fpu, fork: Dynamically allocate 'struct fpu'

Quoted 15 lines · Ingo Molnar

From: Dave Hansen <[email protected]>

The FPU rewrite removed the dynamic allocations of 'struct fpu'. But, this potentially wastes massive amounts of memory (2k per task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the space that we need to the 'task_struct' which we dynamically allocate already. This saves from doing an extra slab allocation at fork().

The only real downside here is that we have to stick everything and the end of the task_struct. But, I think the BUILD_BUG_ON()s I stuck in there should keep that from being too fragile.

Quoted 9 lines
Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>

Dave, can I put your Signed-off-by into this patch? I have already tested these two patches and they are looking good here - so unless you can see some breakage or other problem I'd prefer it to keep it two patches.

Thanks,

Ingo

#3 lore raw

Re: [PATCH 1/2] x86/fpu, fork: Dynamically allocate 'struct fpu'

Quoted 3 lines · Ingo Molnar

Dave, can I put your Signed-off-by into this patch? I have already tested these two patches and they are looking good here - so unless you can see some breakage or other problem I'd prefer it to keep it two patches.

Everything looks good here with your actual two patches applied:

#4 lore raw

Re: [PATCH 1/2] x86/fpu, fork: Dynamically allocate 'struct fpu'

Quoted 9 lines · Dave Hansen
Quoted 3 lines · Ingo Molnar

Dave, can I put your Signed-off-by into this patch? I have already tested these two patches and they are looking good here - so unless you can see some breakage or other problem I'd prefer it to keep it two patches.

Everything looks good here with your actual two patches applied:

Great, thanks!

Ingo

#5 lore raw

[tip:x86/urgent] x86/fpu, sched: Dynamically allocate 'struct fpu '

In reply to Ingo Molnar
x86/fpu, sched: Dynamically allocate 'struct fpu'
Commit-ID:  0c8c0f03e3a292e031596484275c14cf39c0ab7a
Gitweb:     http://git.kernel.org/tip/0c8c0f03e3a292e031596484275c14cf39c0ab7a
Author:     Dave Hansen <[email protected]>
AuthorDate: Fri, 17 Jul 2015 12:28:11 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sat, 18 Jul 2015 03:42:35 +0200

x86/fpu, sched: Dynamically allocate 'struct fpu'

The FPU rewrite removed the dynamic allocations of 'struct fpu'. But, this potentially wastes massive amounts of memory (2k per task on systems that do not have AVX-512 for instance).

Instead of having a separate slab, this patch just appends the space that we need to the 'task_struct' which we dynamically allocate already. This saves from doing an extra slab allocation at fork().

The only real downside here is that we have to stick everything and the end of the task_struct. But, I think the BUILD_BUG_ON()s I stuck in there should keep that from being too fragile.

Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Brian Gerst <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Denys Vlasenko <[email protected]>
Cc H. Peter Anvin <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Oleg Nesterov <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/x86/include/asm/fpu/types.h | 72 +++++++++++++++++++++-------------------
 arch/x86/include/asm/processor.h | 10 ++++--
 arch/x86/kernel/fpu/init.c       | 39 ++++++++++++++++++++++
 arch/x86/kernel/process.c        |  2 +-
 fs/proc/kcore.c                  |  4 +--
 include/linux/sched.h            | 12 +++++--
 kernel/fork.c                    |  8 ++++-
 7 files changed, 104 insertions(+), 43 deletions(-)
arch/x86/include/asm/fpu/types.h +38 -34
index 0637826..c49c517 100644
@@ -189,6 +189,7 @@ union fpregs_state {
 	struct fxregs_state		fxsave;
 	struct swregs_state		soft;
 	struct xregs_state		xsave;
+	u8 __padding[PAGE_SIZE];
 };
 
 /*
@@ -198,40 +199,6 @@ union fpregs_state {
  */
 struct fpu {
 	/*
-	 * @state:
-	 *
-	 * In-memory copy of all FPU registers that we save/restore
-	 * over context switches. If the task is using the FPU then
-	 * the registers in the FPU are more recent than this state
-	 * copy. If the task context-switches away then they get
-	 * saved here and represent the FPU state.
-	 *
-	 * After context switches there may be a (short) time period
-	 * during which the in-FPU hardware registers are unchanged
-	 * and still perfectly match this state, if the tasks
-	 * scheduled afterwards are not using the FPU.
-	 *
-	 * This is the 'lazy restore' window of optimization, which
-	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
-	 *
-	 * We detect whether a subsequent task uses the FPU via setting
-	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
-	 *
-	 * During this window, if the task gets scheduled again, we
-	 * might be able to skip having to do a restore from this
-	 * memory buffer to the hardware registers - at the cost of
-	 * incurring the overhead of #NM fault traps.
-	 *
-	 * Note that on modern CPUs that support the XSAVEOPT (or other
-	 * optimized XSAVE instructions), we don't use #NM traps anymore,
-	 * as the hardware can track whether FPU registers need saving
-	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
-	 * logic, which unconditionally saves/restores all FPU state
-	 * across context switches. (if FPU state exists.)
-	 */
-	union fpregs_state		state;
-
-	/*
 	 * @last_cpu:
 	 *
 	 * Records the last CPU on which this context was loaded into
@@ -288,6 +255,43 @@ struct fpu {
 	 * deal with bursty apps that only use the FPU for a short time:
 	 */
 	unsigned char			counter;
+	/*
+	 * @state:
+	 *
+	 * In-memory copy of all FPU registers that we save/restore
+	 * over context switches. If the task is using the FPU then
+	 * the registers in the FPU are more recent than this state
+	 * copy. If the task context-switches away then they get
+	 * saved here and represent the FPU state.
+	 *
+	 * After context switches there may be a (short) time period
+	 * during which the in-FPU hardware registers are unchanged
+	 * and still perfectly match this state, if the tasks
+	 * scheduled afterwards are not using the FPU.
+	 *
+	 * This is the 'lazy restore' window of optimization, which
+	 * we track though 'fpu_fpregs_owner_ctx' and 'fpu->last_cpu'.
+	 *
+	 * We detect whether a subsequent task uses the FPU via setting
+	 * CR0::TS to 1, which causes any FPU use to raise a #NM fault.
+	 *
+	 * During this window, if the task gets scheduled again, we
+	 * might be able to skip having to do a restore from this
+	 * memory buffer to the hardware registers - at the cost of
+	 * incurring the overhead of #NM fault traps.
+	 *
+	 * Note that on modern CPUs that support the XSAVEOPT (or other
+	 * optimized XSAVE instructions), we don't use #NM traps anymore,
+	 * as the hardware can track whether FPU registers need saving
+	 * or not. On such CPUs we activate the non-lazy ('eagerfpu')
+	 * logic, which unconditionally saves/restores all FPU state
+	 * across context switches. (if FPU state exists.)
+	 */
+	union fpregs_state		state;
+	/*
+	 * WARNING: 'state' is dynamically-sized.  Do not put
+	 * anything after it here.
+	 */
 };
 
 #endif /* _ASM_X86_FPU_H */
arch/x86/include/asm/processor.h +7 -3
index 43e6519..944f178 100644
@@ -390,9 +390,6 @@ struct thread_struct {
 #endif
 	unsigned long		gs;
 
-	/* Floating point and extended processor state */
-	struct fpu		fpu;
-
 	/* Save middle states of ptrace breakpoints */
 	struct perf_event	*ptrace_bps[HBP_NUM];
 	/* Debug status used for traps, single steps, etc... */
@@ -418,6 +415,13 @@ struct thread_struct {
 	unsigned long		iopl;
 	/* Max allowed port in the bitmap, in bytes: */
 	unsigned		io_bitmap_max;
+
+	/* Floating point and extended processor state */
+	struct fpu		fpu;
+	/*
+	 * WARNING: 'fpu' is dynamically-sized.  It *MUST* be at
+	 * the end.
+	 */
 };
 
 /*
arch/x86/kernel/fpu/init.c +39 -0
index 3282679..deacbfa 100644
@@ -136,6 +136,45 @@ static void __init fpu__init_system_generic(void)
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
+#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER)	\
+	BUILD_BUG_ON((sizeof(TYPE) -			\
+			offsetof(TYPE, MEMBER) -	\
+			sizeof(((TYPE *)0)->MEMBER)) > 	\
+			0)				\
+
+/*
+ * We append the 'struct fpu' to the task_struct.
+ */
+int __weak arch_task_struct_size(void)
+{
+	int task_size = sizeof(struct task_struct);
+
+	/*
+	 * Subtract off the static size of the register state.
+	 * It potentially has a bunch of padding.
+	 */
+	task_size -= sizeof(((struct task_struct *)0)->thread.fpu.state);
+
+	/*
+	 * Add back the dynamically-calculated register state
+	 * size.
+	 */
+	task_size += xstate_size;
+
+	/*
+	 * We dynamically size 'struct fpu', so we require that
+	 * it be at the end of 'thread_struct' and that
+	 * 'thread_struct' be at the end of 'task_struct'.  If
+	 * you hit a compile error here, check the structure to
+	 * see if something got added to the end.
+	 */
+	CHECK_MEMBER_AT_END_OF(struct fpu, state);
+	CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
+	CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
+
+	return task_size;
+}
+
 /*
  * Set up the xstate_size based on the legacy FPU context size.
  *
arch/x86/kernel/process.c +1 -1
index 9cad694..975420e 100644
@@ -81,7 +81,7 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister);
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	*dst = *src;
+	memcpy(dst, src, arch_task_struct_size());
 
 	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
 }
fs/proc/kcore.c +2 -2
index 91a4e64..a0fe994 100644
@@ -92,7 +92,7 @@ static size_t get_kcore_size(int *nphdr, size_t *elf_buflen)
 			     roundup(sizeof(CORE_STR), 4)) +
 			roundup(sizeof(struct elf_prstatus), 4) +
 			roundup(sizeof(struct elf_prpsinfo), 4) +
-			roundup(sizeof(struct task_struct), 4);
+			roundup(arch_task_struct_size(), 4);
 	*elf_buflen = PAGE_ALIGN(*elf_buflen);
 	return size + *elf_buflen;
 }
@@ -415,7 +415,7 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 	/* set up the task structure */
 	notes[2].name	= CORE_STR;
 	notes[2].type	= NT_TASKSTRUCT;
-	notes[2].datasz	= sizeof(struct task_struct);
+	notes[2].datasz	= arch_task_struct_size();
 	notes[2].data	= current;
 
 	nhdr->p_filesz	+= notesize(&notes[2]);
include/linux/sched.h +10 -2
index ae21f15..e43a41d 100644
@@ -1522,8 +1522,6 @@ struct task_struct {
 /* hung task detection */
 	unsigned long last_switch_count;
 #endif
-/* CPU-specific state of this task */
-	struct thread_struct thread;
 /* filesystem information */
 	struct fs_struct *fs;
 /* open file information */
@@ -1778,8 +1776,18 @@ struct task_struct {
 	unsigned long	task_state_change;
 #endif
 	int pagefault_disabled;
+/* CPU-specific state of this task */
+	struct thread_struct thread;
+/*
+ * WARNING: on x86, 'thread_struct' contains a variable-sized
+ * structure.  It *MUST* be at the end of 'task_struct'.
+ *
+ * Do not put anything below here!
+ */
 };
 
+extern int arch_task_struct_size(void);
+
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
 #define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed)
 
kernel/fork.c +7 -1
index 1bfefc6..431b67a 100644
@@ -287,15 +287,21 @@ static void set_max_threads(unsigned int max_threads_suggested)
 	max_threads = clamp_t(u64, threads, MIN_THREADS, MAX_THREADS);
 }
 
+int __weak arch_task_struct_size(void)
+{
+	return sizeof(struct task_struct);
+}
+
 void __init fork_init(void)
 {
+	int task_struct_size = arch_task_struct_size();
 #ifndef CONFIG_ARCH_TASK_STRUCT_ALLOCATOR
 #ifndef ARCH_MIN_TASKALIGN
 #define ARCH_MIN_TASKALIGN	L1_CACHE_BYTES
 #endif
 	/* create a slab on which task_structs can be allocated */
 	task_struct_cachep =
-		kmem_cache_create("task_struct", sizeof(struct task_struct),
+		kmem_cache_create("task_struct", task_struct_size,
 			ARCH_MIN_TASKALIGN, SLAB_PANIC | SLAB_NOTRACK, NULL);
 #endif
 
#6 lore raw

PATCH 2/2 x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86

In reply to Ingo Molnar

Don't burden architectures without dynamic task_struct sizing with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.

Cc Dave Hansen <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/Kconfig               |  4 ++++
 arch/x86/Kconfig           |  1 +
 arch/x86/kernel/fpu/init.c | 17 +++++++++--------
 arch/x86/kernel/process.c  |  2 +-
 fs/proc/kcore.c            |  4 ++--
 include/linux/sched.h      |  6 +++++-
 kernel/fork.c              | 11 +++++------
 7 files changed, 27 insertions(+), 18 deletions(-)
arch/Kconfig +4 -0
index bec6666a3cc4..8a8ea7110de8 100644
@@ -221,6 +221,10 @@ config ARCH_TASK_STRUCT_ALLOCATOR
 config ARCH_THREAD_INFO_ALLOCATOR
 	bool
 
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	bool
+
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help
arch/x86/Kconfig +1 -0
index 3dbb7e7909ca..b3a1a5d77d92 100644
@@ -41,6 +41,7 @@ config X86
 	select ARCH_USE_CMPXCHG_LOCKREF		if X86_64
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION	if X86_32
 	select ARCH_WANT_OPTIONAL_GPIOLIB
arch/x86/kernel/fpu/init.c +9 -8
index deacbfa6b33e..0b39173dd971 100644
@@ -4,6 +4,8 @@
 #include <asm/fpu/internal.h>
 #include <asm/tlbflush.h>
 
+#include <linux/sched.h>
+
 /*
  * Initialize the TS bit in CR0 according to the style of context-switches
  * we are using:
@@ -136,16 +138,14 @@ static void __init fpu__init_system_generic(void)
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
-#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER)	\
-	BUILD_BUG_ON((sizeof(TYPE) -			\
-			offsetof(TYPE, MEMBER) -	\
-			sizeof(((TYPE *)0)->MEMBER)) > 	\
-			0)				\
+/* Enforce that 'MEMBER' is the last field of 'TYPE': */
+#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
+	BUILD_BUG_ON(sizeof(TYPE) != offsetofend(TYPE, MEMBER))
 
 /*
- * We append the 'struct fpu' to the task_struct.
+ * We append the 'struct fpu' to the task_struct:
  */
-int __weak arch_task_struct_size(void)
+static void __init fpu__init_task_struct_size(void)
 {
 	int task_size = sizeof(struct task_struct);
 
@@ -172,7 +172,7 @@ int __weak arch_task_struct_size(void)
 	CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
 	CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
 
-	return task_size;
+	arch_task_struct_size = task_size;
 }
 
 /*
@@ -326,6 +326,7 @@ void __init fpu__init_system(struct cpuinfo_x86 *c)
 	fpu__init_system_generic();
 	fpu__init_system_xstate_size_legacy();
 	fpu__init_system_xstate();
+	fpu__init_task_struct_size();
 
 	fpu__init_system_ctx_switch();
 }
arch/x86/kernel/process.c +1 -1
index 975420eac105..397688beed4b 100644
@@ -81,7 +81,7 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister);
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	memcpy(dst, src, arch_task_struct_size());
+	memcpy(dst, src, arch_task_struct_size);
 
 	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
 }
fs/proc/kcore.c +2 -2
index a0fe99485687..92e6726f6e37 100644
@@ -92,7 +92,7 @@ static size_t get_kcore_size(int *nphdr, size_t *elf_buflen)
 			     roundup(sizeof(CORE_STR), 4)) +
 			roundup(sizeof(struct elf_prstatus), 4) +
 			roundup(sizeof(struct elf_prpsinfo), 4) +
-			roundup(arch_task_struct_size(), 4);
+			roundup(arch_task_struct_size, 4);
 	*elf_buflen = PAGE_ALIGN(*elf_buflen);
 	return size + *elf_buflen;
 }
@@ -415,7 +415,7 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 	/* set up the task structure */
 	notes[2].name	= CORE_STR;
 	notes[2].type	= NT_TASKSTRUCT;
-	notes[2].datasz	= arch_task_struct_size();
+	notes[2].datasz	= arch_task_struct_size;
 	notes[2].data	= current;
 
 	nhdr->p_filesz	+= notesize(&notes[2]);
include/linux/sched.h +5 -1
index e43a41d892b6..04b5ada460b4 100644
@@ -1786,7 +1786,11 @@ struct task_struct {
  */
 };
 
-extern int arch_task_struct_size(void);
+#ifdef CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT
+extern int arch_task_struct_size __read_mostly;
+#else
+# define arch_task_struct_size (sizeof(struct task_struct))
+#endif
 
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
 #define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed)
kernel/fork.c +5 -6
index 431b67a6098c..dbd9b8d7b7cc 100644
@@ -287,21 +287,20 @@ static void set_max_threads(unsigned int max_threads_suggested)
 	max_threads = clamp_t(u64, threads, MIN_THREADS, MAX_THREADS);
 }
 
-int __weak arch_task_struct_size(void)
-{
-	return sizeof(struct task_struct);
-}
+#ifdef CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT
+/* Initialized by the architecture: */
+int arch_task_struct_size __read_mostly;
+#endif
 
 void __init fork_init(void)
 {
-	int task_struct_size = arch_task_struct_size();
 #ifndef CONFIG_ARCH_TASK_STRUCT_ALLOCATOR
 #ifndef ARCH_MIN_TASKALIGN
 #define ARCH_MIN_TASKALIGN	L1_CACHE_BYTES
 #endif
 	/* create a slab on which task_structs can be allocated */
 	task_struct_cachep =
-		kmem_cache_create("task_struct", task_struct_size,
+		kmem_cache_create("task_struct", arch_task_struct_size,
 			ARCH_MIN_TASKALIGN, SLAB_PANIC | SLAB_NOTRACK, NULL);
 #endif
 
Signature · 1 line
2.1.4
#7 lore raw

Re: [PATCH 2/2] x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86

Quoted 4 lines · Ingo Molnar

Don't burden architectures without dynamic task_struct sizing with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.

Looks generally sensible.

--Andy

#8 lore raw

[tip:x86/urgent] x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86

In reply to Ingo Molnar
x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86
Commit-ID:  5aaeb5c01c5b6c0be7b7aadbf3ace9f3a4458c3d
Gitweb:     http://git.kernel.org/tip/5aaeb5c01c5b6c0be7b7aadbf3ace9f3a4458c3d
Author:     Ingo Molnar <[email protected]>
AuthorDate: Fri, 17 Jul 2015 12:28:12 +0200
Committer:  Ingo Molnar <[email protected]>
CommitDate: Sat, 18 Jul 2015 03:42:51 +0200

x86/fpu, sched: Introduce CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT and use it on x86

Don't burden architectures without dynamic task_struct sizing with the overhead of dynamic sizing.

Also optimize the x86 code a bit by caching task_struct_size.

Cc Andy Lutomirski <[email protected]>
Cc Borislav Petkov <[email protected]>
Cc Brian Gerst <[email protected]>
Cc Dave Hansen <[email protected]>
Cc Denys Vlasenko <[email protected]>
Cc Linus Torvalds <[email protected]>
Cc Oleg Nesterov <[email protected]>
Cc Peter Zijlstra <[email protected]>
Cc Thomas Gleixner <[email protected]>
---
 arch/Kconfig               |  4 ++++
 arch/x86/Kconfig           |  1 +
 arch/x86/kernel/fpu/init.c | 17 +++++++++--------
 arch/x86/kernel/process.c  |  2 +-
 fs/proc/kcore.c            |  4 ++--
 include/linux/sched.h      |  6 +++++-
 kernel/fork.c              | 11 +++++------
 7 files changed, 27 insertions(+), 18 deletions(-)
arch/Kconfig +4 -0
index bec6666..8a8ea71 100644
@@ -221,6 +221,10 @@ config ARCH_TASK_STRUCT_ALLOCATOR
 config ARCH_THREAD_INFO_ALLOCATOR
 	bool
 
+# Select if arch wants to size task_struct dynamically via arch_task_struct_size:
+config ARCH_WANTS_DYNAMIC_TASK_STRUCT
+	bool
+
 config HAVE_REGS_AND_STACK_ACCESS_API
 	bool
 	help
arch/x86/Kconfig +1 -0
index 3dbb7e7..b3a1a5d 100644
@@ -41,6 +41,7 @@ config X86
 	select ARCH_USE_CMPXCHG_LOCKREF		if X86_64
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_QUEUED_SPINLOCKS
+	select ARCH_WANTS_DYNAMIC_TASK_STRUCT
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_IPC_PARSE_VERSION	if X86_32
 	select ARCH_WANT_OPTIONAL_GPIOLIB
arch/x86/kernel/fpu/init.c +9 -8
index deacbfa..0b39173 100644
@@ -4,6 +4,8 @@
 #include <asm/fpu/internal.h>
 #include <asm/tlbflush.h>
 
+#include <linux/sched.h>
+
 /*
  * Initialize the TS bit in CR0 according to the style of context-switches
  * we are using:
@@ -136,16 +138,14 @@ static void __init fpu__init_system_generic(void)
 unsigned int xstate_size;
 EXPORT_SYMBOL_GPL(xstate_size);
 
-#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER)	\
-	BUILD_BUG_ON((sizeof(TYPE) -			\
-			offsetof(TYPE, MEMBER) -	\
-			sizeof(((TYPE *)0)->MEMBER)) > 	\
-			0)				\
+/* Enforce that 'MEMBER' is the last field of 'TYPE': */
+#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
+	BUILD_BUG_ON(sizeof(TYPE) != offsetofend(TYPE, MEMBER))
 
 /*
- * We append the 'struct fpu' to the task_struct.
+ * We append the 'struct fpu' to the task_struct:
  */
-int __weak arch_task_struct_size(void)
+static void __init fpu__init_task_struct_size(void)
 {
 	int task_size = sizeof(struct task_struct);
 
@@ -172,7 +172,7 @@ int __weak arch_task_struct_size(void)
 	CHECK_MEMBER_AT_END_OF(struct thread_struct, fpu);
 	CHECK_MEMBER_AT_END_OF(struct task_struct, thread);
 
-	return task_size;
+	arch_task_struct_size = task_size;
 }
 
 /*
@@ -326,6 +326,7 @@ void __init fpu__init_system(struct cpuinfo_x86 *c)
 	fpu__init_system_generic();
 	fpu__init_system_xstate_size_legacy();
 	fpu__init_system_xstate();
+	fpu__init_task_struct_size();
 
 	fpu__init_system_ctx_switch();
 }
arch/x86/kernel/process.c +1 -1
index 975420e..397688b 100644
@@ -81,7 +81,7 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister);
  */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
-	memcpy(dst, src, arch_task_struct_size());
+	memcpy(dst, src, arch_task_struct_size);
 
 	return fpu__copy(&dst->thread.fpu, &src->thread.fpu);
 }
fs/proc/kcore.c +2 -2
index a0fe994..92e6726 100644
@@ -92,7 +92,7 @@ static size_t get_kcore_size(int *nphdr, size_t *elf_buflen)
 			     roundup(sizeof(CORE_STR), 4)) +
 			roundup(sizeof(struct elf_prstatus), 4) +
 			roundup(sizeof(struct elf_prpsinfo), 4) +
-			roundup(arch_task_struct_size(), 4);
+			roundup(arch_task_struct_size, 4);
 	*elf_buflen = PAGE_ALIGN(*elf_buflen);
 	return size + *elf_buflen;
 }
@@ -415,7 +415,7 @@ static void elf_kcore_store_hdr(char *bufp, int nphdr, int dataoff)
 	/* set up the task structure */
 	notes[2].name	= CORE_STR;
 	notes[2].type	= NT_TASKSTRUCT;
-	notes[2].datasz	= arch_task_struct_size();
+	notes[2].datasz	= arch_task_struct_size;
 	notes[2].data	= current;
 
 	nhdr->p_filesz	+= notesize(&notes[2]);
include/linux/sched.h +5 -1
index e43a41d..04b5ada 100644
@@ -1786,7 +1786,11 @@ struct task_struct {
  */
 };
 
-extern int arch_task_struct_size(void);
+#ifdef CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT
+extern int arch_task_struct_size __read_mostly;
+#else
+# define arch_task_struct_size (sizeof(struct task_struct))
+#endif
 
 /* Future-safe accessor for struct task_struct's cpus_allowed. */
 #define tsk_cpus_allowed(tsk) (&(tsk)->cpus_allowed)
kernel/fork.c +5 -6
index 431b67a..dbd9b8d 100644
@@ -287,21 +287,20 @@ static void set_max_threads(unsigned int max_threads_suggested)
 	max_threads = clamp_t(u64, threads, MIN_THREADS, MAX_THREADS);
 }
 
-int __weak arch_task_struct_size(void)
-{
-	return sizeof(struct task_struct);
-}
+#ifdef CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT
+/* Initialized by the architecture: */
+int arch_task_struct_size __read_mostly;
+#endif
 
 void __init fork_init(void)
 {
-	int task_struct_size = arch_task_struct_size();
 #ifndef CONFIG_ARCH_TASK_STRUCT_ALLOCATOR
 #ifndef ARCH_MIN_TASKALIGN
 #define ARCH_MIN_TASKALIGN	L1_CACHE_BYTES
 #endif
 	/* create a slab on which task_structs can be allocated */
 	task_struct_cachep =
-		kmem_cache_create("task_struct", task_struct_size,
+		kmem_cache_create("task_struct", arch_task_struct_size,
 			ARCH_MIN_TASKALIGN, SLAB_PANIC | SLAB_NOTRACK, NULL);
 #endif