config: ti_omap5_common: Palmas power support in SPL
PATCH 1/1 config: ti_omap5_common: Palmas power support in SPL
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
--- include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)
include/configs/ti_armv7_common.h +1 -0
@@ -261,6 +261,7 @@#define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT
include/configs/ti_omap5_common.h +0 -2
@@ -40,9 +40,7 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif -#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif #include <asm/arch/cpu.h> #include <asm/arch/omap.h>
Signature · 1 line
1.9.1
PATCH 1/1 config: ti_omap5_common: Palmas power support in SPL
Le jeudi 02 juillet 2015 ? 00:20 +0200, Paul Kocialkowski a ?crit :
Quoted 6 lines
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
I sent this a while back and it hasn't been picked up yet. Anything holding it back in particular?
Quoted 23 lines
Signed-off-by Paul Kocialkowski <[email protected]>--- include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)include/configs/ti_armv7_common.h +1
-0@@ -261,6 +261,7 @@#define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT include/configs/ti_omap5_common.h +0
-0
include/configs/ti_omap5_common.h line 46
Quoted 9 lines
include/configs/ti_omap5_common.h +0
-2@@ -40,9 +40,7 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif -#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif #include <asm/arch/cpu.h> #include <asm/arch/omap.h>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150715/6f0fb42b/attachment.sig>
PATCH 1/1 config: ti_omap5_common: Palmas power support in SPL
Quoted 37 lines · Paul Kocialkowski
Le jeudi 02 juillet 2015 ? 00:20 +0200, Paul Kocialkowski a ?crit :
Quoted 6 lines
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
I sent this a while back and it hasn't been picked up yet. Anything holding it back in particular?
Quoted 26 lines
Signed-off-by Paul Kocialkowski <[email protected]>--- include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)include/configs/ti_armv7_common.h +1
-0@@ -261,6 +261,7 @@#define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT include/configs/ti_omap5_common.h +0
-0@@ -40,9 +40,7 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
Quoted 6 lines
include/configs/ti_omap5_common.h line 46
Quoted 6 lines
include/configs/ti_omap5_common.h +0
-2-#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif #include <asm/arch/cpu.h> #include <asm/arch/omap.h>
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150716/9cc980a6/attachment.sig>
PATCH 1/1 config: ti_omap5_common: Palmas power support in SPL
Le jeudi 16 juillet 2015 ? 09:21 -0400, Tom Rini a ?crit :
Quoted 38 lines · Paul Kocialkowski
Quoted 37 lines
Le jeudi 02 juillet 2015 ? 00:20 +0200, Paul Kocialkowski a ?crit :
Quoted 6 lines
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
I sent this a while back and it hasn't been picked up yet. Anything holding it back in particular?
Quoted 26 lines
Signed-off-by Paul Kocialkowski <[email protected]>--- include/configs/ti_armv7_common.h | 1 + include/configs/ti_omap5_common.h | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)include/configs/ti_armv7_common.h +1
-0@@ -261,6 +261,7 @@#define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT #define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_POWER_SUPPORT #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SPL_BOARD_INIT include/configs/ti_omap5_common.h +0
-0@@ -40,9 +40,7 @@#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS #endif
Quoted 8 lines
Quoted 6 lines
include/configs/ti_omap5_common.h line 46
Quoted 6 lines
include/configs/ti_omap5_common.h +0
-2-#ifndef CONFIG_SPL_BUILD #define CONFIG_PALMAS_POWER -#endif #include <asm/arch/cpu.h> #include <asm/arch/omap.h> Reviewed-by Tom Rini <[email protected]>
Now that the merge window is open, I think we could merge that one.
What do you think?
Thanks!
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: This is a digitally signed message part
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150726/911d0ecd/attachment.sig>
Quoted 9 lines · Paul Kocialkowski
Palmas power support is required for OMAP5 devices such as the OMAP5 uEVM, that need to e.g. enable MMC power at SPL stage.
This is especially important when booting from a peripheral (such as USB, UART), where the bootrom will not enable power for the MMC device that will hold the main U-Boot.
Signed-off-by Paul Kocialkowski <[email protected]>Reviewed-by Tom Rini <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 836 bytes Desc: Digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20150728/073943cf/attachment.sig>