Patch "libata: increase the timeout when setting transfer mode" has been added to the 3.14-stable tree

This is a note to let you know that I've just added the patch titled

libata: increase the timeout when setting transfer mode

to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary

The filename of the patch is:
libata-increase-the-timeout-when-setting-transfer-mode.patch
and it can be found in the queue-3.14 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let <[email protected]> know about it.

From: Mikulas Patocka <[email protected]>
Date: Wed, 8 Jul 2015 13:06:12 -0400
Subject: libata: increase the timeout when setting transfer mode

From: Mikulas Patocka <[email protected]>

commit d531be2ca2f27cca5f041b6a140504999144a617 upstream.

I have a ST4000DM000 disk. If Linux is booted while the disk is spun down, the command that sets transfer mode causes the disk to spin up. The spin-up takes longer than the default 5s timeout, so the command fails and timeout is reported.

Fix this by increasing the timeout to 15s, which is enough for the disk to spin up.

---
 drivers/ata/libata-core.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

@@ -4534,7 +4534,8 @@ static unsigned int ata_dev_set_xfermode
 	else /* In the ancient relic department - skip all of this */
 		return 0;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
+	/* On some disks, this command causes spin-up, so we need longer timeout */
+	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 15000);
 
 	DPRINTK("EXIT, err_mask=%x\n", err_mask);
 	return err_mask;

Patches currently in stable-queue which might be from [email protected] are

queue-3.14/libata-increase-the-timeout-when-setting-transfer-mode.patch