drm/i915: read bpp from vbt only for older panels
Subsystems (2)
PATCH 1/1 drm/i915: read bpp from vbt only for older panels
From: "Thulasimani,Sivakumar" <[email protected]>
BPP bits defined in VBT should be used only on panels whose edid version is 1.3 or older. EDID version 1.4 introduced offsets where bpp is defined and hence should be preferred over any value programmed in VBT.
--- drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp.c +10 -1
@@ -132,6 +132,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);static void vlv_init_panel_power_sequencer (struct intel_dp *intel_dp);static void vlv_steal_power_sequencer (struct drm_device *dev,enum pipe pipe); +static struct edid *intel_dp_get_edid (struct intel_dp *intel_dp);static int intel_dp_max_link_bw (struct intel_dp *intel_dp)
@@ -1353,6 +1354,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,enum port port =dp_to_dig_port (intel_dp)->port;struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->base.crtc);struct intel_connector *intel_connector = intel_dp->attached_connector; +struct edid *edid =NULL ;int lane_count, clock;int min_lane_count =1 ;int max_lane_count =intel_dp_max_lane_count (intel_dp);
@@ -1409,12 +1411,19 @@ intel_dp_compute_config(struct intel_encoder *encoder,* bpc in between. */ bpp = pipe_config->pipe_bpp;if (is_edp (intel_dp)) { -if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) { + edid =intel_dp_get_edid (intel_dp); + +/* Get bpp from vbt only for panels with edid 1.3 or older */ +if (edid && edid->version ==1 && edid->revision <=3 && + (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp)) {DRM_DEBUG_KMS ("clamping bpp for eDP panel to BIOS-provided %i\n" , dev_priv->vbt.edp_bpp); bpp = dev_priv->vbt.edp_bpp; } +if (edid) +kfree (edid); +/* * Use the maximum clock and number of lanes the eDP panel * advertizes being capable of. The panels are generally
Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 6 lines · Sivakumar Thulasimani
From: "Thulasimani,Sivakumar" <[email protected]>
BPP bits defined in VBT should be used only on panels whose edid version is 1.3 or older. EDID version 1.4 introduced offsets where bpp is defined and hence should be preferred over any value programmed in VBT.
Should we actually look at the EDID bpp somewhere?
Quoted 26 lines
Signed-off-by Sivakumar Thulasimani <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp.c +2
-0@@ -132,6 +132,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);static void vlv_init_panel_power_sequencer (struct intel_dp *intel_dp);static void vlv_steal_power_sequencer (struct drm_device *dev,enum pipe pipe); +static struct edid *intel_dp_get_edid (struct intel_dp *intel_dp);static int intel_dp_max_link_bw (struct intel_dp *intel_dp)@@ -1353,6 +1354,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,enum port port =dp_to_dig_port (intel_dp)->port;struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->base.crtc);struct intel_connector *intel_connector = intel_dp->attached_connector; +struct edid *edid =NULL ;int lane_count, clock;int min_lane_count =1 ;int max_lane_count =intel_dp_max_lane_count (intel_dp);
drivers/gpu/drm/i915/intel_dp.c intel_dp_compute_config(struct intel_encoder *encoder, · line 1418
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c +5
-1@@ -1409,12 +1411,19 @@ intel_dp_compute_config(struct intel_encoder *encoder,* bpc in between. */ bpp = pipe_config->pipe_bpp;if (is_edp (intel_dp)) { -if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) { + edid =intel_dp_get_edid (intel_dp); + +/* Get bpp from vbt only for panels with edid 1.3 or older */ +if (edid && edid->version ==1 && edid->revision <=3 && + (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp)) {
Now you require the panel to have an EDID in order to use the bpp in VBT.
BR,
Jani.
Quoted 18 lines
drivers/gpu/drm/i915/intel_dp.c +3
-0DRM_DEBUG_KMS ("clamping bpp for eDP panel to BIOS-provided %i\n" , dev_priv->vbt.edp_bpp); bpp = dev_priv->vbt.edp_bpp; } +if (edid) +kfree (edid); +/* * Use the maximum clock and number of lanes the eDP panel * advertizes being capable of. The panels are generally Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 46 lines · Jani Nikula
Quoted 6 lines · Sivakumar Thulasimani
From: "Thulasimani,Sivakumar" <[email protected]>
BPP bits defined in VBT should be used only on panels whose edid version is 1.3 or older. EDID version 1.4 introduced offsets where bpp is defined and hence should be preferred over any value programmed in VBT.
Should we actually look at the EDID bpp somewhere?
Quoted 26 lines
Signed-off-by Sivakumar Thulasimani <[email protected]>--- drivers/gpu/drm/i915/intel_dp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp.c +2
-0@@ -132,6 +132,7 @@ static void edp_panel_vdd_off(struct intel_dp *intel_dp, bool sync);static void vlv_init_panel_power_sequencer (struct intel_dp *intel_dp);static void vlv_steal_power_sequencer (struct drm_device *dev,enum pipe pipe); +static struct edid *intel_dp_get_edid (struct intel_dp *intel_dp);static int intel_dp_max_link_bw (struct intel_dp *intel_dp)@@ -1353,6 +1354,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,enum port port =dp_to_dig_port (intel_dp)->port;struct intel_crtc *intel_crtc =to_intel_crtc (pipe_config->base.crtc);struct intel_connector *intel_connector = intel_dp->attached_connector; +struct edid *edid =NULL ;int lane_count, clock;int min_lane_count =1 ;int max_lane_count =intel_dp_max_lane_count (intel_dp);drivers/gpu/drm/i915/intel_dp.c intel_dp_compute_config(struct intel_encoder *encoder, · line 1418
Quoted 9 lines
drivers/gpu/drm/i915/intel_dp.c +5
-1@@ -1409,12 +1411,19 @@ intel_dp_compute_config(struct intel_encoder *encoder,* bpc in between. */ bpp = pipe_config->pipe_bpp;if (is_edp (intel_dp)) { -if (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp) { + edid =intel_dp_get_edid (intel_dp); + +/* Get bpp from vbt only for panels with edid 1.3 or older */ +if (edid && edid->version ==1 && edid->revision <=3 && + (dev_priv->vbt.edp_bpp && dev_priv->vbt.edp_bpp < bpp)) {Now you require the panel to have an EDID in order to use the bpp in VBT.
Quoted 2 lines
BR,
Jani.
will update with a new patch that will remove this expectation.
Quoted 18 lines
Quoted 18 lines
drivers/gpu/drm/i915/intel_dp.c +3
-0DRM_DEBUG_KMS ("clamping bpp for eDP panel to BIOS-provided %i\n" , dev_priv->vbt.edp_bpp); bpp = dev_priv->vbt.edp_bpp; } +if (edid) +kfree (edid); +/* * Use the maximum clock and number of lanes the eDP panel * advertizes being capable of. The panels are generally Signature · 6 lines
1.7.9.5 _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx
Signature · 7 lines
regards, Sivakumar _______________________________________________ Intel-gfx mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/intel-gfx