Skip to contentSkip to conversation

NV12 90/270 rotated GGTT mapping

PATCH New Tvrtko Ursulin 3 participants 8 messages Aug 3, 2015 – Aug 11, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v2 cover NV12 90/270 rotated GGTT mapping

From: Tvrtko Ursulin <[email protected]>

Still the first attempt at rotated GGTT mapping for the NV12 format.

Just rebased on latest -nighlty this time.

Sending out for Chandra to try the full rotated NV12 patches with the latest NV12 workarounds.

Only smoke tested with "normal" (not NV12) kms_rotation_crc.

Tvrtko Ursulin (4):
drm/i915: Support planar formats in tile height calculations drm/i915: Support appending to the rotated pages mapping drm/i915: Support NV12 in rotated GGTT mapping drm/i915: Enable querying offset of UV plane with
intel_plane_obj_offset

 drivers/gpu/drm/i915/i915_gem_gtt.c  | 58 ++++++++++++++++++++++++++++--------
 drivers/gpu/drm/i915/i915_gem_gtt.h  |  4 +++
 drivers/gpu/drm/i915/intel_display.c | 48 ++++++++++++++++++++++-------
 drivers/gpu/drm/i915/intel_drv.h     |  6 ++--
 drivers/gpu/drm/i915/intel_sprite.c  |  4 +--
 5 files changed, 93 insertions(+), 27 deletions(-)
Signature · 6 lines
2.4.6

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/4 drm/i915: Support planar formats in tile height calculations

From: Tvrtko Ursulin <[email protected]>

This will be needed for NV12 support.

v2: Rebase.

---
 drivers/gpu/drm/i915/intel_display.c | 10 +++++-----
 drivers/gpu/drm/i915/intel_drv.h     |  2 +-
 drivers/gpu/drm/i915/intel_sprite.c  |  2 +-
 3 files changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/intel_display.c +5 -5
index 43b0f17ad1fa..03e550874aec 100644
@@ -2224,7 +2224,7 @@ static bool need_vtd_wa(struct drm_device *dev)
 
 unsigned int
 intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
-		  uint64_t fb_format_modifier)
+		  uint64_t fb_format_modifier, unsigned int plane)
 {
 	unsigned int tile_height;
 	uint32_t pixel_bytes;
@@ -2240,7 +2240,7 @@ intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
 		tile_height = 32;
 		break;
 	case I915_FORMAT_MOD_Yf_TILED:
-		pixel_bytes = drm_format_plane_cpp(pixel_format, 0);
+		pixel_bytes = drm_format_plane_cpp(pixel_format, plane);
 		switch (pixel_bytes) {
 		default:
 		case 1:
@@ -2274,7 +2274,7 @@ intel_fb_align_height(struct drm_device *dev, unsigned int height,
 		      uint32_t pixel_format, uint64_t fb_format_modifier)
 {
 	return ALIGN(height, intel_tile_height(dev, pixel_format,
-					       fb_format_modifier));
+					       fb_format_modifier, 0));
 }
 
 static int
@@ -2300,7 +2300,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb,
 	info->fb_modifier = fb->modifier[0];
 
 	tile_height = intel_tile_height(fb->dev, fb->pixel_format,
-					fb->modifier[0]);
+					fb->modifier[0], 0);
 	tile_pitch = PAGE_SIZE / tile_height;
 	info->width_pages = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
 	info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
@@ -3094,7 +3094,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
 	if (intel_rotation_90_or_270(rotation)) {
 		/* stride = Surface height in tiles */
 		tile_height = intel_tile_height(dev, fb->pixel_format,
-						fb->modifier[0]);
+						fb->modifier[0], 0);
 		stride = DIV_ROUND_UP(fb->height, tile_height);
 		x_offset = stride * tile_height - y - src_h;
 		y_offset = x;
drivers/gpu/drm/i915/intel_drv.h +1 -1
index 320c9e6bd848..429d05406a5c 100644
@@ -1061,7 +1061,7 @@ int intel_plane_atomic_calc_changes(struct drm_crtc_state *crtc_state,
 
 unsigned int
 intel_tile_height(struct drm_device *dev, uint32_t pixel_format,
-		  uint64_t fb_format_modifier);
+		  uint64_t fb_format_modifier, unsigned int plane);
 
 static inline bool
 intel_rotation_90_or_270(unsigned int rotation)
drivers/gpu/drm/i915/intel_sprite.c +1 -1
index 9d8af2f8a875..f0bfe1647967 100644
@@ -228,7 +228,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
 	if (intel_rotation_90_or_270(rotation)) {
 		/* stride: Surface height in tiles */
 		tile_height = intel_tile_height(dev, fb->pixel_format,
-						fb->modifier[0]);
+						fb->modifier[0], 0);
 		stride = DIV_ROUND_UP(fb->height, tile_height);
 		plane_size = (src_w << 16) | src_h;
 		x_offset = stride * tile_height - y - (src_h + 1);
Signature · 6 lines
2.4.6

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#2 lore raw

PATCH 2/4 drm/i915: Support appending to the rotated pages mapping

In reply to Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

By providing a start offset into the source array of pages, and returning the end position in the scatter-gather table, we will be able to append the UV plane to the rotated mapping in later patches.

v2: Rebase.

---
 drivers/gpu/drm/i915/i915_gem_gtt.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +13 -8
index 96054a560f4f..b4c6ed5d02dd 100644
@@ -2722,15 +2722,18 @@ i915_gem_obj_lookup_or_create_ggtt_vma(struct drm_i915_gem_object *obj,
 
 }
 
-static void
-rotate_pages(dma_addr_t *in, unsigned int width, unsigned int height,
-	     struct sg_table *st)
+static struct scatterlist *
+rotate_pages(dma_addr_t *in, unsigned int offset,
+	     unsigned int width, unsigned int height,
+	     struct sg_table *st, struct scatterlist *sg)
 {
 	unsigned int column, row;
 	unsigned int src_idx;
-	struct scatterlist *sg = st->sgl;
 
-	st->nents = 0;
+	if (!sg) {
+		st->nents = 0;
+		sg = st->sgl;
+	}
 
 	for (column = 0; column < width; column++) {
 		src_idx = width * (height - 1) + column;
@@ -2741,12 +2744,14 @@ rotate_pages(dma_addr_t *in, unsigned int width, unsigned int height,
 			 * The only thing we need are DMA addresses.
 			 */
 			sg_set_page(sg, NULL, PAGE_SIZE, 0);
-			sg_dma_address(sg) = in[src_idx];
+			sg_dma_address(sg) = in[offset + src_idx];
 			sg_dma_len(sg) = PAGE_SIZE;
 			sg = sg_next(sg);
 			src_idx -= width;
 		}
 	}
+
+	return sg;
 }
 
 static struct sg_table *
@@ -2784,9 +2789,9 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
 	}
 
 	/* Rotate the pages. */
-	rotate_pages(page_addr_list,
+	rotate_pages(page_addr_list, 0,
 		     rot_info->width_pages, rot_info->height_pages,
-		     st);
+		     st, NULL);
 
 	DRM_DEBUG_KMS(
 		      "Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n",
Signature · 6 lines
2.4.6

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#3 lore raw

PATCH 3/4 drm/i915: Support NV12 in rotated GGTT mapping

In reply to Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

Just adding the rotated UV plane at the end of the rotated Y plane.

v2: Rebase.

---
 drivers/gpu/drm/i915/i915_gem_gtt.c  | 37 ++++++++++++++++++++++++++++++------
 drivers/gpu/drm/i915/i915_gem_gtt.h  |  3 +++
 drivers/gpu/drm/i915/intel_display.c | 12 ++++++++++++
 3 files changed, 46 insertions(+), 6 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +31 -6
index b4c6ed5d02dd..6495996c285e 100644
@@ -2760,10 +2760,13 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
 {
 	struct intel_rotation_info *rot_info = &ggtt_view->rotation_info;
 	unsigned int size_pages = rot_info->size >> PAGE_SHIFT;
+	unsigned int size_pages_uv;
 	struct sg_page_iter sg_iter;
 	unsigned long i;
 	dma_addr_t *page_addr_list;
 	struct sg_table *st;
+	unsigned int uv_start_page;
+	struct scatterlist *sg;
 	int ret = -ENOMEM;
 
 	/* Allocate a temporary list of source pages for random access. */
@@ -2772,12 +2775,18 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
 	if (!page_addr_list)
 		return ERR_PTR(ret);
 
+	/* Account for UV plane with NV12. */
+	if (rot_info->pixel_format == DRM_FORMAT_NV12)
+		size_pages_uv = rot_info->size_uv >> PAGE_SHIFT;
+	else
+		size_pages_uv = 0;
+
 	/* Allocate target SG list. */
 	st = kmalloc(sizeof(*st), GFP_KERNEL);
 	if (!st)
 		goto err_st_alloc;
 
-	ret = sg_alloc_table(st, size_pages, GFP_KERNEL);
+	ret = sg_alloc_table(st, size_pages + size_pages_uv, GFP_KERNEL);
 	if (ret)
 		goto err_sg_alloc;
 
@@ -2789,15 +2798,30 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
 	}
 
 	/* Rotate the pages. */
-	rotate_pages(page_addr_list, 0,
+	sg = rotate_pages(page_addr_list, 0,
 		     rot_info->width_pages, rot_info->height_pages,
 		     st, NULL);
 
+	/* Append the UV plane if NV12. */
+	if (rot_info->pixel_format == DRM_FORMAT_NV12) {
+		uv_start_page = size_pages;
+
+		/* Check for tile-row un-alignment. */
+		if (offset_in_page(rot_info->uv_offset))
+			uv_start_page--;
+
+		rotate_pages(page_addr_list, uv_start_page,
+			     rot_info->width_pages_uv,
+			     rot_info->height_pages_uv,
+			     st, sg);
+	}
+
 	DRM_DEBUG_KMS(
-		      "Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages).\n",
+		      "Created rotated page mapping for object size %zu (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0)).\n",
 		      obj->base.size, rot_info->pitch, rot_info->height,
 		      rot_info->pixel_format, rot_info->width_pages,
-		      rot_info->height_pages, size_pages);
+		      rot_info->height_pages, size_pages + size_pages_uv,
+		      size_pages);
 
 	drm_free_large(page_addr_list);
 
@@ -2809,10 +2833,11 @@ err_st_alloc:
 	drm_free_large(page_addr_list);
 
 	DRM_DEBUG_KMS(
-		      "Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages)\n",
+		      "Failed to create rotated mapping for object size %zu! (%d) (pitch=%u, height=%u, pixel_format=0x%x, %ux%u tiles, %u pages (%u plane 0))\n",
 		      obj->base.size, ret, rot_info->pitch, rot_info->height,
 		      rot_info->pixel_format, rot_info->width_pages,
-		      rot_info->height_pages, size_pages);
+		      rot_info->height_pages, size_pages + size_pages_uv,
+		      size_pages);
 	return ERR_PTR(ret);
 }
 
drivers/gpu/drm/i915/i915_gem_gtt.h +3 -0
index e1cfa292f9ad..3daa60332e28 100644
@@ -124,10 +124,13 @@ enum i915_ggtt_view_type {
 struct intel_rotation_info {
 	unsigned int height;
 	unsigned int pitch;
+	unsigned int uv_offset;
 	uint32_t pixel_format;
 	uint64_t fb_modifier;
 	unsigned int width_pages, height_pages;
 	uint64_t size;
+	unsigned int width_pages_uv, height_pages_uv;
+	uint64_t size_uv;
 };
 
 struct i915_ggtt_view {
drivers/gpu/drm/i915/intel_display.c +12 -0
index 03e550874aec..342d96553a7b 100644
@@ -2297,6 +2297,7 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb,
 	info->height = fb->height;
 	info->pixel_format = fb->pixel_format;
 	info->pitch = fb->pitches[0];
+	info->uv_offset = fb->offsets[1];
 	info->fb_modifier = fb->modifier[0];
 
 	tile_height = intel_tile_height(fb->dev, fb->pixel_format,
@@ -2306,6 +2307,17 @@ intel_fill_fb_ggtt_view(struct i915_ggtt_view *view, struct drm_framebuffer *fb,
 	info->height_pages = DIV_ROUND_UP(fb->height, tile_height);
 	info->size = info->width_pages * info->height_pages * PAGE_SIZE;
 
+	if (info->pixel_format == DRM_FORMAT_NV12) {
+		tile_height = intel_tile_height(fb->dev, fb->pixel_format,
+						fb->modifier[0], 1);
+		tile_pitch = PAGE_SIZE / tile_height;
+		info->width_pages_uv = DIV_ROUND_UP(fb->pitches[0], tile_pitch);
+		info->height_pages_uv = DIV_ROUND_UP(fb->height / 2,
+						     tile_height);
+		info->size_uv = info->width_pages_uv * info->height_pages_uv *
+				PAGE_SIZE;
+	}
+
 	return 0;
 }
 
Signature · 6 lines
2.4.6

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#4 lore raw

PATCH 4/4 drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset

In reply to Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

v2: Rebase.

---
 drivers/gpu/drm/i915/i915_gem_gtt.c  |  2 ++
 drivers/gpu/drm/i915/i915_gem_gtt.h  |  1 +
 drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_drv.h     |  4 +++-
 drivers/gpu/drm/i915/intel_sprite.c  |  2 +-
 5 files changed, 28 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +2 -0
index 6495996c285e..0bae7128845a 100644
@@ -2810,6 +2810,8 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
 		if (offset_in_page(rot_info->uv_offset))
 			uv_start_page--;
 
+		rot_info->uv_start_page = uv_start_page;
+
 		rotate_pages(page_addr_list, uv_start_page,
 			     rot_info->width_pages_uv,
 			     rot_info->height_pages_uv,
drivers/gpu/drm/i915/i915_gem_gtt.h +1 -0
index 3daa60332e28..516a72b9b1fd 100644
@@ -131,6 +131,7 @@ struct intel_rotation_info {
 	uint64_t size;
 	unsigned int width_pages_uv, height_pages_uv;
 	uint64_t size_uv;
+	unsigned int uv_start_page;
 };
 
 struct i915_ggtt_view {
drivers/gpu/drm/i915/intel_display.c +21 -5
index 342d96553a7b..83dadb4796a4 100644
@@ -2914,14 +2914,29 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
 }
 
 unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
-				     struct drm_i915_gem_object *obj)
+				     struct drm_i915_gem_object *obj,
+				     unsigned int plane)
 {
 	const struct i915_ggtt_view *view = &i915_ggtt_view_normal;
+	struct i915_vma *vma;
+	unsigned char *offset;
 
 	if (intel_rotation_90_or_270(intel_plane->base.state->rotation))
 		view = &i915_ggtt_view_rotated;
 
-	return i915_gem_obj_ggtt_offset_view(obj, view);
+	vma = i915_gem_obj_to_ggtt_view(obj, view);
+	if (WARN(!vma, "ggtt vma for display object not found! (view=%u)\n",
+		view->type))
+		return -1;
+
+	offset = (unsigned char *)vma->node.start;
+
+	if (plane == 1) {
+		offset += vma->ggtt_view.rotation_info.uv_start_page *
+			  PAGE_SIZE;
+	}
+
+	return (unsigned long)offset;
 }
 
 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
@@ -3079,7 +3094,7 @@ static void skylake_update_primary_plane(struct drm_crtc *crtc,
 	obj = intel_fb_obj(fb);
 	stride_div = intel_fb_stride_alignment(dev, fb->modifier[0],
 					       fb->pixel_format);
-	surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj);
+	surf_addr = intel_plane_obj_offset(to_intel_plane(plane), obj, 0);
 
 	/*
 	 * FIXME: intel_plane_state->src, dst aren't set when transitional
@@ -11520,8 +11535,9 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	if (ret)
 		goto cleanup_pending;
 
-	work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary), obj)
-						  + intel_crtc->dspaddr_offset;
+	work->gtt_offset = intel_plane_obj_offset(to_intel_plane(primary),
+						  obj, 0);
+	work->gtt_offset += intel_crtc->dspaddr_offset;
 
 	if (mmio_flip) {
 		ret = intel_queue_mmio_flip(dev, crtc, fb, obj, ring,
drivers/gpu/drm/i915/intel_drv.h +3 -1
index 429d05406a5c..6b89840c9c9c 100644
@@ -1142,7 +1142,9 @@ int skl_update_scaler_crtc(struct intel_crtc_state *crtc_state);
 int skl_max_scale(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state);
 
 unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
-				     struct drm_i915_gem_object *obj);
+				     struct drm_i915_gem_object *obj,
+				     unsigned int plane);
+
 u32 skl_plane_ctl_format(uint32_t pixel_format);
 u32 skl_plane_ctl_tiling(uint64_t fb_modifier);
 u32 skl_plane_ctl_rotation(unsigned int rotation);
drivers/gpu/drm/i915/intel_sprite.c +1 -1
index f0bfe1647967..c13c5296e1de 100644
@@ -223,7 +223,7 @@ skl_update_plane(struct drm_plane *drm_plane, struct drm_crtc *crtc,
 	else if (key->flags & I915_SET_COLORKEY_SOURCE)
 		plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
 
-	surf_addr = intel_plane_obj_offset(intel_plane, obj);
+	surf_addr = intel_plane_obj_offset(intel_plane, obj, 0);
 
 	if (intel_rotation_90_or_270(rotation)) {
 		/* stride: Surface height in tiles */
Signature · 6 lines
2.4.6

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#5 lore raw

Re: [PATCH 4/4] drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset

Quoted 43 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

v2: Rebase.

---
 drivers/gpu/drm/i915/i915_gem_gtt.c  |  2 ++
 drivers/gpu/drm/i915/i915_gem_gtt.h  |  1 +
 drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++-----
 drivers/gpu/drm/i915/intel_drv.h     |  4 +++-
 drivers/gpu/drm/i915/intel_sprite.c  |  2 +-
 5 files changed, 28 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +2 -0
index 6495996c285e..0bae7128845a 100644
@@ -2810,6 +2810,8 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
 		if (offset_in_page(rot_info->uv_offset))
 			uv_start_page--;
 
+		rot_info->uv_start_page = uv_start_page;
+
 		rotate_pages(page_addr_list, uv_start_page,
 			     rot_info->width_pages_uv,
 			     rot_info->height_pages_uv,
drivers/gpu/drm/i915/i915_gem_gtt.h +1 -0
index 3daa60332e28..516a72b9b1fd 100644
@@ -131,6 +131,7 @@ struct intel_rotation_info {
 	uint64_t size;
 	unsigned int width_pages_uv, height_pages_uv;
 	uint64_t size_uv;
+	unsigned int uv_start_page;
 };
 
 struct i915_ggtt_view {
drivers/gpu/drm/i915/intel_display.c +0 -0
index 342d96553a7b..83dadb4796a4 100644

drivers/gpu/drm/i915/intel_display.c u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier, · line 2918

Quoted 6 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
@@ -2914,14 +2914,29 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
 }
 
 unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
-				     struct drm_i915_gem_object *obj)
+				     struct drm_i915_gem_object *obj,
+				     unsigned int plane)

All callers pass in .plane=0; how is this supposed to work? -Chris

Signature · 5 lines
Chris Wilson, Intel Open Source Technology Centre
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#6 lore raw

Re: [PATCH 4/4] drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset

Quoted 46 lines · Chris Wilson
Quoted 45 lines · Tvrtko Ursulin

From: Tvrtko Ursulin <[email protected]>

v2: Rebase.

---
  drivers/gpu/drm/i915/i915_gem_gtt.c  |  2 ++
  drivers/gpu/drm/i915/i915_gem_gtt.h  |  1 +
  drivers/gpu/drm/i915/intel_display.c | 26 +++++++++++++++++++++-----
  drivers/gpu/drm/i915/intel_drv.h     |  4 +++-
  drivers/gpu/drm/i915/intel_sprite.c  |  2 +-
  5 files changed, 28 insertions(+), 7 deletions(-)
drivers/gpu/drm/i915/i915_gem_gtt.c +2 -0
index 6495996c285e..0bae7128845a 100644
@@ -2810,6 +2810,8 @@ intel_rotate_fb_obj_pages(struct i915_ggtt_view *ggtt_view,
  		if (offset_in_page(rot_info->uv_offset))
  			uv_start_page--;
 
+		rot_info->uv_start_page = uv_start_page;
+
  		rotate_pages(page_addr_list, uv_start_page,
  			     rot_info->width_pages_uv,
  			     rot_info->height_pages_uv,
drivers/gpu/drm/i915/i915_gem_gtt.h +1 -0
index 3daa60332e28..516a72b9b1fd 100644
@@ -131,6 +131,7 @@ struct intel_rotation_info {
  	uint64_t size;
  	unsigned int width_pages_uv, height_pages_uv;
  	uint64_t size_uv;
+	unsigned int uv_start_page;
  };
 
  struct i915_ggtt_view {
drivers/gpu/drm/i915/intel_display.c +0 -0
index 342d96553a7b..83dadb4796a4 100644
@@ -2914,14 +2914,29 @@ u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier,
  }
 
Quoted 6 lines

drivers/gpu/drm/i915/intel_display.c u32 intel_fb_stride_alignment(struct drm_device *dev, uint64_t fb_modifier, · line 2918

Quoted 4 lines
drivers/gpu/drm/i915/intel_display.c +2 -1
  unsigned long intel_plane_obj_offset(struct intel_plane *intel_plane,
-				     struct drm_i915_gem_object *obj)
+				     struct drm_i915_gem_object *obj,
+				     unsigned int plane)

All callers pass in .plane=0; how is this supposed to work?

I forgot to include a critical piece of information in the cover letter this time - this series only deals with GGTT mapping part of the story, while Chandra has many more patches on top which implement the actual rotated NV12 scanout.

Tvrtko
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx

Tested-by on v1 4/4
#7 lore raw

Re: [PATCH 4/4] drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset

In reply to Tvrtko Ursulin

Task id: 6929 -------------------------------------Summary-------------------------------------
Platform Delta drm-intel-nightly Series Applied
ILK -1 302/302 301/302

SNB                                  315/315              315/315
IVB                                  336/336              336/336
BYT                                  283/283              283/283
HSW                                  378/378              378/378

-------------------------------------Detailed-------------------------------------
Platform Test drm-intel-nightly Series Applied
*ILK igt@kms_flip@wf_vblank-vs-modeset-interruptible PASS(1) DMESG_WARN(1)
Note: You need to pay more attention to line start with '*'
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx