surface pro 3: Add support driver for Surface Pro 3 buttons
PATCH v3 1/1 surface pro 3: Add support driver for Surface Pro 3 buttons
Since Surface Pro 3 does not follow the specs of "Windows ACPI Design Guide for SoC Platform", code in drivers/input/misc/soc_array.c can not detect these buttons on it. According to bios implementation, Surface Pro 3 encapsulates these buttons in a device named "VGBI", with _HID "MSHW0028". When any of the buttons is pressed, a specify ACPI notification code for this button will be delivered to "VGBI". For example, if power button is pressed down, ACPI notification code of 0xc6 will be sent by Notify(VGBI, 0xc6).
This patch leverages "VGBI" to distinguish different ACPI notification code from Power button, Home button, Volume button, then dispatches these code to input layer. Lid is already covered by acpi button driver, so there's no need to rewrite.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=84651
---
v3:
- Revert handle_surface_button_notify and keep original 'switch/case' in surface_button_notify. Add/fix some comments for surface_button_notify.
v2:
- Introduce MACRO handle_surface_button_notify to make it pairing the PRESS and RELEASE cases, convert dev_info to dev_info_ratelimited when in error condition.
---
MAINTAINERS | 5 + drivers/platform/x86/Kconfig | 5 + drivers/platform/x86/Makefile | 1 + drivers/platform/x86/surfacepro3_button.c | 210 ++++++++++++++++++++++++++++++ 4 files changed, 221 insertions(+) create mode 100644 drivers/platform/x86/surfacepro3_button.c
MAINTAINERS +5 -0
@@ -6712,6 +6712,11 @@ T: git git://git.monstr.eu/linux-2.6-microblaze.git S: Supported F: arch/microblaze/ +MICROSOFT SURFACE PRO 3 BUTTON DRIVER +M: Chen Yu <[email protected]> +S: Supported +F: drivers/platform/x86/surfacepro3_button.c + MICROTEK X6 SCANNER M: Oliver Neukum <[email protected]> S: Maintained
drivers/platform/x86/Kconfig +5 -0
@@ -919,4 +919,9 @@ config INTEL_PMC_IPC The PMC is an ARC processor which defines IPC commands for communication with other entities in the CPU. +config SURFACE_PRO3_BUTTON + tristate "Power/home/volume buttons driver for Microsoft Surface Pro 3 tablet" + depends on ACPI && INPUT + ---help--- + This driver handles the power/home/volume buttons on the Microsoft Surface Pro 3 tablet. endif # X86_PLATFORM_DEVICES
drivers/platform/x86/Makefile +1 -0
@@ -60,3 +60,4 @@ obj-$(CONFIG_INTEL_SMARTCONNECT) += intel-smartconnect.o obj-$(CONFIG_PVPANIC) += pvpanic.o obj-$(CONFIG_ALIENWARE_WMI) += alienware-wmi.o obj-$(CONFIG_INTEL_PMC_IPC) += intel_pmc_ipc.o +obj-$(CONFIG_SURFACE_PRO3_BUTTON) += surfacepro3_button.o
drivers/platform/x86/surfacepro3_button.c new file +210 -0
210 lines not on this page · raw message
Signature · 1 line
1.8.4.2