Skip to contentSkip to conversation

sunxi: display: Enable composite video support on more boards

PATCH New Hans de Goede 2 participants 4 messages Aug 6, 2015 – Aug 11, 2015

lore
Share & tools
lore

Hans de Goede

author
#0 lore raw

PATCH 1/2 sunxi: display: Enable composite video support on more boards

Enable composite video support on all boards which have a composite video out connector (either cinch or jack).

Signed-off-by Hans de Goede <[email protected]>
---
 configs/Bananapi_defconfig      | 1 +
 configs/Bananapro_defconfig     | 1 +
 configs/Mele_A1000_defconfig    | 1 +
 configs/Mele_M5_defconfig       | 1 +
 configs/Mini-X_defconfig        | 1 +
 configs/Orangepi_defconfig      | 1 +
 configs/Orangepi_mini_defconfig | 1 +
 configs/ba10_tv_box_defconfig   | 1 +
 configs/i12-tvbox_defconfig     | 1 +
 configs/jesurun_q5_defconfig    | 1 +
 10 files changed, 10 insertions(+)
configs/Bananapi_defconfig +1 -0
index 4b9ef35..560295f 100644
@@ -3,6 +3,7 @@ CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
 CONFIG_GMAC_TX_DELAY=3
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/Bananapro_defconfig +1 -0
index 5506ab3..346db34 100644
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PH0"
 CONFIG_USB2_VBUS_PIN="PH1"
 CONFIG_GMAC_TX_DELAY=3
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-bananapro"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/Mele_A1000_defconfig +1 -0
index 5e66d43..b983c8c 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_VIDEO_VGA=y
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-a1000"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/Mele_M5_defconfig +1 -0
index 40f5daa..0d1ba15 100644
@@ -4,6 +4,7 @@ CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=432
 CONFIG_DRAM_ZQ=122
 CONFIG_MMC0_CD_PIN="PH1"
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-m5"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/Mini-X_defconfig +1 -0
index 00b6c63..c88eb9b 100644
@@ -1,6 +1,7 @@
 CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-mini-xplus"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/Orangepi_defconfig +1 -0
index f9408b1..d67bb90 100644
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_USB1_VBUS_PIN="PH26"
 CONFIG_USB2_VBUS_PIN="PH22"
 CONFIG_VIDEO_VGA=y
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs/Orangepi_mini_defconfig +1 -0
index 1dc0e76..71d236b 100644
@@ -7,6 +7,7 @@ CONFIG_MMC3_CD_PIN="PH11"
 CONFIG_MMC_SUNXI_SLOT_EXTRA=3
 CONFIG_USB1_VBUS_PIN="PH26"
 CONFIG_USB2_VBUS_PIN="PH22"
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_GMAC_TX_DELAY=3
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-orangepi-mini"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
configs/ba10_tv_box_defconfig +1 -0
index 5b5fc12..cdcd9de 100644
@@ -4,6 +4,7 @@ CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=384
 CONFIG_DRAM_EMR1=4
 CONFIG_USB2_VBUS_PIN="PH12"
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-ba10-tvbox"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/i12-tvbox_defconfig +1 -0
index 99e78ba..d4d9524 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN7I=y
 CONFIG_DRAM_CLK=384
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-i12-tvbox"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
configs/jesurun_q5_defconfig +1 -0
index b0d8621..46c38e5 100644
@@ -2,6 +2,7 @@ CONFIG_ARM=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_MACH_SUN4I=y
 CONFIG_DRAM_CLK=312
+CONFIG_VIDEO_COMPOSITE=y
 CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-jesurun-q5"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL=y
Signature · 1 line
2.4.3
author
#1 lore raw

PATCH 2/2 sunxi: display: Disable HDMI support on A13 based tablets

The sun5i die has a hdmi encoder onboard, but the A13 package does not route this to the outside, disable hdmi support on A13 based boards.

Signed-off-by Hans de Goede <[email protected]>
---
 configs/Ampe_A76_defconfig     | 1 +
 configs/TZX-Q8-713B7_defconfig | 1 +
 configs/UTOO_P66_defconfig     | 1 +
 configs/forfun_q88db_defconfig | 1 +
 configs/iNet_86VS_defconfig    | 1 +
 5 files changed, 5 insertions(+)
configs/Ampe_A76_defconfig +1 -0
index 1d36919..3aaf029 100644
@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PG0"
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
 CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
configs/TZX-Q8-713B7_defconfig +1 -0
index 3508834..4ef80db 100644
@@ -6,6 +6,7 @@ CONFIG_MMC0_CD_PIN="PG0"
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
 CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
configs/UTOO_P66_defconfig +1 -0
index 169c2e8..99a8c31 100644
@@ -9,6 +9,7 @@ CONFIG_USB0_VBUS_PIN="PB04"
 CONFIG_USB0_VBUS_DET="PG01"
 CONFIG_USB0_ID_DET="PG2"
 CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_LCD_MODE="x:480,y:800,depth:18,pclk_khz:25000,le:2,ri:93,up:2,lo:93,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_POWER="PG4"
configs/forfun_q88db_defconfig +1 -0
index 6fff725..610a062 100644
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=384
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
 CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:87,ri:40,up:31,lo:13,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
configs/iNet_86VS_defconfig +1 -0
index 33162d1..f958c31 100644
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=408
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
 CONFIG_AXP_GPIO=y
+# CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
 CONFIG_VIDEO_LCD_POWER="AXP0-0"
 CONFIG_VIDEO_LCD_BL_EN="AXP0-1"
Signature · 1 line
2.4.3