ASoC: ssm4567: Add sense support
Subsystems (3)
Lars-Peter Clausen
maintainerPATCH 1/1 ASoC: ssm4567: Add sense support
The ssm4567 has sensing circuitry that can be used to monitor the current and voltage on the speaker amplifier output has well as the VBAT input. This data can be output over the I2S interface so it can be processed by a DSP or similar.
This patch adds the sense capture output stream to the CODEC DAI as well as DAPM widgets that ensure that the sensing circuitry is powered up when the capture stream is active.
--- sound/soc/codecs/ssm4567.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
sound/soc/codecs/ssm4567.c +21 -0
@@ -174,6 +174,12 @@ static const struct snd_soc_dapm_widget ssm4567_dapm_widgets[] = {SND_SOC_DAPM_SWITCH ("Amplifier Boost" ,SSM4567_REG_POWER_CTRL ,3 ,1 , &ssm4567_amplifier_boost_control), +SND_SOC_DAPM_SIGGEN ("Sense" ), + +SND_SOC_DAPM_PGA ("Current Sense" ,SSM4567_REG_POWER_CTRL ,4 ,1 ,NULL ,0 ), +SND_SOC_DAPM_PGA ("Voltage Sense" ,SSM4567_REG_POWER_CTRL ,5 ,1 ,NULL ,0 ), +SND_SOC_DAPM_PGA ("VBAT Sense" ,SSM4567_REG_POWER_CTRL ,6 ,1 ,NULL ,0 ), + SND_SOC_DAPM_OUTPUT("OUT"), };
@@ -181,6 +187,13 @@ static const struct snd_soc_dapm_route ssm4567_routes[] = { { "OUT", NULL, "Amplifier Boost" }, { "Amplifier Boost", "Switch", "DAC" }, { "OUT", NULL, "DAC" }, + + { "Current Sense", NULL, "Sense" }, + { "Voltage Sense", NULL, "Sense" }, + { "VBAT Sense", NULL, "Sense" }, + { "Capture Sense", NULL, "Current Sense" }, + { "Capture Sense", NULL, "Voltage Sense" }, + { "Capture Sense", NULL, "VBAT Sense" }, }; static int ssm4567_hw_params(struct snd_pcm_substream *substream,
@@ -388,6 +401,14 @@ static struct snd_soc_dai_driver ssm4567_dai = { .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32, }, + .capture = { + .stream_name = "Capture Sense", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats =SNDRV_PCM_FMTBIT_S16_LE |SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S32, + }, .ops = &ssm4567_dai_ops, };
Signature · 1 line
2.1.4
Mark Brown
maintainerApplied "ASoC: ssm4567: Add sense support" to the asoc tree
The patch
ASoC: ssm4567: Add sense support
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
dbe71b9d86ee77cf58a92657c43b0e48954dc62bMon Sep 17 00:00:00 2001
From: Lars-Peter Clausen <[email protected]>
Date: Wed, 12 Aug 2015 13:58:38 +0200
Subject: [PATCH] ASoC: ssm4567: Add sense support
The ssm4567 has sensing circuitry that can be used to monitor the current and voltage on the speaker amplifier output has well as the VBAT input. This data can be output over the I2S interface so it can be processed by a DSP or similar.
This patch adds the sense capture output stream to the CODEC DAI as well as DAPM widgets that ensure that the sensing circuitry is powered up when the capture stream is active.
--- sound/soc/codecs/ssm4567.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
sound/soc/codecs/ssm4567.c +21 -0
@@ -174,6 +174,12 @@ static const struct snd_soc_dapm_widget ssm4567_dapm_widgets[] = {SND_SOC_DAPM_SWITCH ("Amplifier Boost" ,SSM4567_REG_POWER_CTRL ,3 ,1 , &ssm4567_amplifier_boost_control), +SND_SOC_DAPM_SIGGEN ("Sense" ), + +SND_SOC_DAPM_PGA ("Current Sense" ,SSM4567_REG_POWER_CTRL ,4 ,1 ,NULL ,0 ), +SND_SOC_DAPM_PGA ("Voltage Sense" ,SSM4567_REG_POWER_CTRL ,5 ,1 ,NULL ,0 ), +SND_SOC_DAPM_PGA ("VBAT Sense" ,SSM4567_REG_POWER_CTRL ,6 ,1 ,NULL ,0 ), + SND_SOC_DAPM_OUTPUT("OUT"), };
@@ -181,6 +187,13 @@ static const struct snd_soc_dapm_route ssm4567_routes[] = { { "OUT", NULL, "Amplifier Boost" }, { "Amplifier Boost", "Switch", "DAC" }, { "OUT", NULL, "DAC" }, + + { "Current Sense", NULL, "Sense" }, + { "Voltage Sense", NULL, "Sense" }, + { "VBAT Sense", NULL, "Sense" }, + { "Capture Sense", NULL, "Current Sense" }, + { "Capture Sense", NULL, "Voltage Sense" }, + { "Capture Sense", NULL, "VBAT Sense" }, }; static int ssm4567_hw_params(struct snd_pcm_substream *substream,
@@ -388,6 +401,14 @@ static struct snd_soc_dai_driver ssm4567_dai = { .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32, }, + .capture = { + .stream_name = "Capture Sense", + .channels_min = 1, + .channels_max = 1, + .rates = SNDRV_PCM_RATE_8000_192000, + .formats =SNDRV_PCM_FMTBIT_S16_LE |SNDRV_PCM_FMTBIT_S24_LE | + SNDRV_PCM_FMTBIT_S32, + }, .ops = &ssm4567_dai_ops, };
Signature · 1 line
2.5.0