Skip to contentSkip to conversation

regulator: core: Reduce rdev locking region when releasing regulator

PATCH New Mark Brown 1 participant 3 messages Aug 12, 2015 Voltage and current regulator framework

lore
Share & tools
lore

Mark Brown

author maintainer
#0 lore raw

PATCH 1/3 regulator: core: Reduce rdev locking region when releasing regulator

When we release a regulator we need to remove references to it from the rdev which means locking the rdev. Currently we also free resources associated with the regulator inside the rdev lock but there is no need to do this, we can reduce the region the lock is held by restricting it to just actions that affect the rdev.

---
 drivers/regulator/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/regulator/core.c +3 -2
index 62e4f3b..89be8e2 100644
@@ -1601,14 +1601,15 @@ static void _regulator_put(struct regulator *regulator)
 	if (regulator->dev)
 		sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name);
 	mutex_lock(&rdev->mutex);
-	kfree(regulator->supply_name);
 	list_del(&regulator->list);
-	kfree(regulator);
 
 	rdev->open_count--;
 	rdev->exclusive = 0;
 	mutex_unlock(&rdev->mutex);
 
+	kfree(regulator->supply_name);
+	kfree(regulator);
+
 	module_put(rdev->owner);
 }
 
Signature · 1 line
2.5.0
author maintainer
#1 lore raw

PATCH 2/3 regulator: core: Move more deallocation into class unregister

We really ought to be using the class dvice lifetime management features more than we are rather than open coding them so take a step towards that by moving some of the simplest deallocations to the dev_release() function.

---
 drivers/regulator/core.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/regulator/core.c +3 -2
index 89be8e2..01a0a78 100644
@@ -3598,6 +3598,9 @@ static const struct attribute_group *regulator_dev_groups[] = {
 static void regulator_dev_release(struct device *dev)
 {
 	struct regulator_dev *rdev = dev_get_drvdata(dev);
+
+	kfree(rdev->constraints);
+	of_node_put(rdev->dev.of_node);
 	kfree(rdev);
 }
 
@@ -3829,9 +3832,7 @@ void regulator_unregister(struct regulator_dev *rdev)
 	unset_regulator_supplies(rdev);
 	list_del(&rdev->list);
 	mutex_unlock(&regulator_list_mutex);
-	kfree(rdev->constraints);
 	regulator_ena_gpio_free(rdev);
-	of_node_put(rdev->dev.of_node);
 	device_unregister(&rdev->dev);
 }
 EXPORT_SYMBOL_GPL(regulator_unregister);
Signature · 1 line
2.5.0
author maintainer
#2 lore raw

PATCH 3/3 regulator: core: Use class device list for regulator_list in late init

In reply to Mark Brown

The regulator_list has exactly the same contents as the list that the driver core maintains of regulator_class members so is redundant. As a first step in converting over to use the class device list convert our iteration in late_initcall() to use the class device iterator.

---
 drivers/regulator/core.c | 106 ++++++++++++++++++++++++-----------------------
 1 file changed, 55 insertions(+), 51 deletions(-)
drivers/regulator/core.c +55 -51
index 01a0a78..0bfbada 100644
@@ -110,6 +110,11 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 					  struct device *dev,
 					  const char *supply_name);
 
+static struct regulator_dev *dev_to_rdev(struct device *dev)
+{
+	return container_of(dev, struct regulator_dev, dev);
+}
+
 static const char *rdev_get_name(struct regulator_dev *rdev)
 {
 	if (rdev->constraints && rdev->constraints->name)
@@ -4152,13 +4157,57 @@ static int __init regulator_init(void)
 /* init early to allow our consumers to complete system booting */
 core_initcall(regulator_init);
 
-static int __init regulator_init_complete(void)
+static int regulator_late_cleanup(struct device *dev, void *data)
 {
-	struct regulator_dev *rdev;
-	const struct regulator_ops *ops;
-	struct regulation_constraints *c;
+	struct regulator_dev *rdev = dev_to_rdev(dev);
+	const struct regulator_ops *ops = rdev->desc->ops;
+	struct regulation_constraints *c = rdev->constraints;
 	int enabled, ret;
 
+	if (c && c->always_on)
+		return 0;
+
+	if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
+		return 0;
+
+	mutex_lock(&rdev->mutex);
+
+	if (rdev->use_count)
+		goto unlock;
+
+	/* If we can't read the status assume it's on. */
+	if (ops->is_enabled)
+		enabled = ops->is_enabled(rdev);
+	else
+		enabled = 1;
+
+	if (!enabled)
+		goto unlock;
+
+	if (have_full_constraints()) {
+		/* We log since this may kill the system if it goes
+		 * wrong. */
+		rdev_info(rdev, "disabling\n");
+		ret = _regulator_do_disable(rdev);
+		if (ret != 0)
+			rdev_err(rdev, "couldn't disable: %d\n", ret);
+	} else {
+		/* The intention is that in future we will
+		 * assume that full constraints are provided
+		 * so warn even if we aren't going to do
+		 * anything here.
+		 */
+		rdev_warn(rdev, "incomplete constraints, leaving on\n");
+	}
+
+unlock:
+	mutex_unlock(&rdev->mutex);
+
+	return 0;
+}
+
+static int __init regulator_init_complete(void)
+{
 	/*
 	 * Since DT doesn't provide an idiomatic mechanism for
 	 * enabling full constraints and since it's much more natural
@@ -4168,58 +4217,13 @@ static int __init regulator_init_complete(void)
 	if (of_have_populated_dt())
 		has_full_constraints = true;
 
-	mutex_lock(&regulator_list_mutex);
-
 	/* If we have a full configuration then disable any regulators
 	 * we have permission to change the status for and which are
 	 * not in use or always_on.  This is effectively the default
 	 * for DT and ACPI as they have full constraints.
 	 */
-	list_for_each_entry(rdev, &regulator_list, list) {
-		ops = rdev->desc->ops;
-		c = rdev->constraints;
-
-		if (c && c->always_on)
-			continue;
-
-		if (c && !(c->valid_ops_mask & REGULATOR_CHANGE_STATUS))
-			continue;
-
-		mutex_lock(&rdev->mutex);
-
-		if (rdev->use_count)
-			goto unlock;
-
-		/* If we can't read the status assume it's on. */
-		if (ops->is_enabled)
-			enabled = ops->is_enabled(rdev);
-		else
-			enabled = 1;
-
-		if (!enabled)
-			goto unlock;
-
-		if (have_full_constraints()) {
-			/* We log since this may kill the system if it
-			 * goes wrong. */
-			rdev_info(rdev, "disabling\n");
-			ret = _regulator_do_disable(rdev);
-			if (ret != 0)
-				rdev_err(rdev, "couldn't disable: %d\n", ret);
-		} else {
-			/* The intention is that in future we will
-			 * assume that full constraints are provided
-			 * so warn even if we aren't going to do
-			 * anything here.
-			 */
-			rdev_warn(rdev, "incomplete constraints, leaving on\n");
-		}
-
-unlock:
-		mutex_unlock(&rdev->mutex);
-	}
-
-	mutex_unlock(&regulator_list_mutex);
+	class_for_each_device(&regulator_class, NULL, NULL,
+			      regulator_late_cleanup);
 
 	return 0;
 }
Signature · 1 line
2.5.0