openssh: add variable for key path
PATCH 1/1 openssh: add variable for key path
This patch adds a variable for the key directory path. This is especially useful when working with a read-only file system where you want to specify the location e.g. on a r/w partition. To be consistent, the change was also done for the read write path.
For changing the path simply create a bbappend and override the variable.
--- .../openssh/openssh_10.2p1.bb | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +10 -6
@@ -99,6 +99,10 @@ CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" # We don't want to depend on libblockfile CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no" +# This allows overriding the key location in a bbappend +RO_SSH_KEY_DIR ?= "/var/run/ssh" +SSH_KEY_DIR ?= "/etc/ssh" + do_configure:prepend () { export LD="${CC}" install -m 0600 ${UNPACKDIR}/sshd_config ${B}/
@@ -113,24 +117,24 @@ sshd_hostkey_setup() { # Enable specific ssh host keys sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config if ${@bb.utils.contains('PACKAGECONFIG','hostkey-rsa','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${SSH_KEY_DIR}/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ecdsa','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${SSH_KEY_DIR}/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ed25519','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${SSH_KEY_DIR}/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config fi sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config_readonly if ${@bb.utils.contains('PACKAGECONFIG','hostkey-rsa','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${RO_SSH_KEY_DIR}/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ecdsa','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${RO_SSH_KEY_DIR}/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ed25519','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${RO_SSH_KEY_DIR}/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi }
Signature · 1 line
2.43.0
Quoted 18 lines · Patrick Vogelaar via lists.openembedded.org
This patch adds a variable for the key directory path. This is especially useful when working with a read-only file system where you want to specify the location e.g. on a r/w partition. To be consistent, the change was also done for the read write path.
For changing the path simply create a bbappend and override the variable.
Signed-off-by Patrick Vogelaar <[email protected]>--- .../openssh/openssh_10.2p1.bb | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)meta/recipes-connectivity/openssh/openssh_10.2p1.bb +0
-0
meta/recipes-connectivity/openssh/openssh_10.2p1.bb CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" · line 104
Quoted 6 lines
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +3
-0@@ -99,6 +99,10 @@ CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" # We don't want to depend on libblockfile CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no" +# This allows overriding the key location in a bbappend +RO_SSH_KEY_DIR ?= "/var/run/ssh" +SSH_KEY_DIR ?= "/etc/ssh"
The naming here is very easy to confuse, but I guess it's to match with the 'sshd_config' and 'sshd_config_readonly' filenames. I think we should be explicit in the RO case that we're talking about the read-only configuration though. And we'd prefer this as a suffix instead of a prefix.
Oh, and we should make it clear that this is specific to openssh, then these variables could be set from a config file instead of just a bbappend. And make it clear that it's for the host keys while we're at it.
Many 'and's there!
So, I suggest we use:
OPENSSH_HOST_KEY_DIR
OPENSSH_HOST_KEY_DIR_READONLY_CONFIG
Quoted 24 lines
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +5
-4+ do_configure:prepend () { export LD="${CC}" install -m 0600 ${UNPACKDIR}/sshd_config ${B}/@@ -113,24 +117,24 @@ sshd_hostkey_setup() { # Enable specific ssh host keys sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config if ${@bb.utils.contains('PACKAGECONFIG','hostkey-rsa','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${SSH_KEY_DIR}/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ecdsa','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${SSH_KEY_DIR}/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ed25519','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${SSH_KEY_DIR}/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config fi sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config_readonly if ${@bb.utils.contains('PACKAGECONFIG','hostkey-rsa','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${RO_SSH_KEY_DIR}/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly
meta/recipes-connectivity/openssh/openssh_10.2p1.bb sshd_hostkey_setup() { · line 139
Quoted 10 lines
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +2
-2fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ecdsa','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${RO_SSH_KEY_DIR}/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ed25519','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${RO_SSH_KEY_DIR}/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi }
Best regards,
Signature · 1 line
Paul Barker
PATCH v2 1/1 openssh: add variable for key path
In reply to Patrick VogelaarThis patch adds a variable for the key directory path. This is especially useful when working with a read-only file system where you want to specify the location e.g. on a r/w partition. To be consistent, the change was also done for the read write path.
For changing the path simply create a bbappend and override the variable.
--- .../openssh/openssh_10.2p1.bb | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +10 -6
@@ -99,6 +99,10 @@ CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" # We don't want to depend on libblockfile CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no" +# This allows overriding the key location +OPENSSH_HOST_KEY_DIR_READONLY_CONFIG ?= "/var/run/ssh" +OPENSSH_HOST_KEY_DIR ?= "/etc/ssh" + do_configure:prepend () { export LD="${CC}" install -m 0600 ${UNPACKDIR}/sshd_config ${B}/
@@ -113,24 +117,24 @@ sshd_hostkey_setup() { # Enable specific ssh host keys sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config if ${@bb.utils.contains('PACKAGECONFIG','hostkey-rsa','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${OPENSSH_HOST_KEY_DIR}/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ecdsa','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${OPENSSH_HOST_KEY_DIR}/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ed25519','true','false',d)}; then - echo "HostKey /etc/ssh/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config + echo "HostKey ${OPENSSH_HOST_KEY_DIR}/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config fi sed -i '/HostKey/d' ${D}${sysconfdir}/ssh/sshd_config_readonly if ${@bb.utils.contains('PACKAGECONFIG','hostkey-rsa','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${OPENSSH_HOST_KEY_DIR_READONLY_CONFIG}/ssh_host_rsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ecdsa','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${OPENSSH_HOST_KEY_DIR_READONLY_CONFIG}/ssh_host_ecdsa_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi if ${@bb.utils.contains('PACKAGECONFIG','hostkey-ed25519','true','false',d)}; then - echo "HostKey /var/run/ssh/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly + echo "HostKey ${OPENSSH_HOST_KEY_DIR_READONLY_CONFIG}/ssh_host_ed25519_key" >> ${D}${sysconfdir}/ssh/sshd_config_readonly fi }
Signature · 1 line
2.43.0
Hi,
Quoted 18 lines · Patrick Vogelaar via lists.openembedded.org
This patch adds a variable for the key directory path. This is especially useful when working with a read-only file system where you want to specify the location e.g. on a r/w partition. To be consistent, the change was also done for the read write path.
For changing the path simply create a bbappend and override the variable.
Signed-off-by Patrick Vogelaar <[email protected]>--- .../openssh/openssh_10.2p1.bb | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)meta/recipes-connectivity/openssh/openssh_10.2p1.bb +0
-0
meta/recipes-connectivity/openssh/openssh_10.2p1.bb CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" · line 104
Quoted 6 lines
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +3
-0@@ -99,6 +99,10 @@ CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" # We don't want to depend on libblockfile CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no" +# This allows overriding the key location +OPENSSH_HOST_KEY_DIR_READONLY_CONFIG ?= "/var/run/ssh" +OPENSSH_HOST_KEY_DIR ?= "/etc/ssh"
Thanks for the patch, it was merged in master. As a follow-up, could you send patches to document these variables in
https://git.yoctoproject.org/yocto-docs/tree/documentation/ref-manual/variables.rst?
And add a note here
https://git.yoctoproject.org/yocto-docs/tree/documentation/migration-guides/release-notes-6.0.rst#n24?
Thanks!
Antonin
Signature · 3 lines
Antonin Godard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Hi Antonin,
Quoted 35 lines
Antonin Godard <[email protected]> hat am 29.01.2026 12:17 CET geschrieben:
Hi,
Quoted 18 lines · Patrick Vogelaar via lists.openembedded.org
This patch adds a variable for the key directory path. This is especially useful when working with a read-only file system where you want to specify the location e.g. on a r/w partition. To be consistent, the change was also done for the read write path.
For changing the path simply create a bbappend and override the variable.
Signed-off-by Patrick Vogelaar <[email protected]>--- .../openssh/openssh_10.2p1.bb | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)meta/recipes-connectivity/openssh/openssh_10.2p1.bb +0
-0meta/recipes-connectivity/openssh/openssh_10.2p1.bb CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" · line 104
Quoted 6 lines
meta/recipes-connectivity/openssh/openssh_10.2p1.bb +3
-0@@ -99,6 +99,10 @@ CACHED_CONFIGUREVARS += "ac_cv_path_PATH_PASSWD_PROG=${bindir}/passwd" # We don't want to depend on libblockfile CACHED_CONFIGUREVARS += "ac_cv_header_maillock_h=no" +# This allows overriding the key location +OPENSSH_HOST_KEY_DIR_READONLY_CONFIG ?= "/var/run/ssh" +OPENSSH_HOST_KEY_DIR ?= "/etc/ssh"Thanks for the patch, it was merged in master. As a follow-up, could you send patches to document these variables in
https://git.yoctoproject.org/yocto-docs/tree/documentation/ref-manual/variables.rst?
Quoted 2 lines
And add a note here
https://git.yoctoproject.org/yocto-docs/tree/documentation/migration-guides/release-notes-6.0.rst#n24?
I will send a patch that documents the variable. But I don't know where to put it in the release notes. Can you guide me to the section where this would fit in.
Quoted 8 lines
Thanks!
AntoninSignature · 3 lines
Antonin Godard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
Thanks
Patrick
Hi,
On Sat Jan 31, 2026 at 11:01 AM CET, Patrick Vogelaar via lists.openembedded.org wrote:
[...]
Quoted 8 lines
Quoted 6 lines
Thanks for the patch, it was merged in master. As a follow-up, could you send patches to document these variables in
https://git.yoctoproject.org/yocto-docs/tree/documentation/ref-manual/variables.rst?And add a note here
https://git.yoctoproject.org/yocto-docs/tree/documentation/migration-guides/release-notes-6.0.rst#n24?I will send a patch that documents the variable. But I don't know where to put it in the release notes. Can you guide me to the section where this would fit in.
Yes, it should be in this document:
https://git.yoctoproject.org/yocto-docs/tree/documentation/migration-guides/release-notes-6.0.rst
Under the bullet point "New variables"
Thanks,
Antonin
Signature · 3 lines
Antonin Godard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com