ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h
PATCH v2 1/4 ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h
As almost all sama5 sd/mmc env configurations are same, so move them to at91-sama5_common.h.
Also define CONFIG_ENV_VARS_UBOOT_CONFIG to have the varaible: $board_name. Then we can use 'at91-${board_name}.dtb' as the dtb name.
TODO: since sama5d3xek has different dtb name, we need to some extra stuff to make it work on sama5d3xek boards.
---
Changes in v2:
- use CONFIG_ENV_VARS_UBOOT_CONFIG instead thanks to Andreas.
include/configs/at91-sama5_common.h | 12 ++++++++++++ include/configs/sama5d3_xplained.h | 10 +--------- include/configs/sama5d3xek.h | 10 +--------- include/configs/sama5d4_xplained.h | 18 +----------------- include/configs/sama5d4ek.h | 16 +--------------- 5 files changed, 16 insertions(+), 50 deletions(-)
include/configs/at91-sama5_common.h +12 -0
@@ -27,6 +27,7 @@#define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_CPUINFO +#define CONFIG_ENV_VARS_UBOOT_CONFIG #define CONFIG_CMD_BOOTZ #define CONFIG_OF_LIBFDT /* Device Tree support */
@@ -52,6 +53,17 @@#define CONFIG_CMD_DHCP #ifdef CONFIG_SYS_USE_MMC +/* u-boot env in sd/mmc card */ +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_ENV_SIZE 0x4000 + +#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-${board_name}.dtb; " \ + "fatload mmc 0:1 0x22000000 zImage; " \ + "bootz 0x22000000 - 0x21000000"#define CONFIG_BOOTARGS \ "console=ttyS0,115200 earlyprintk " \ "root=/dev/mmcblk0p2 rw rootwait"
include/configs/sama5d3_xplained.h +1 -9
@@ -124,15 +124,7 @@"nand read 0x22000000 0x200000 0x600000;" \ "bootz 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d3_xplained.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else #define CONFIG_ENV_IS_NOWHERE #endif
include/configs/sama5d3xek.h +1 -9
@@ -171,15 +171,7 @@"nand read 0x22000000 0x200000 0x600000;" \ "bootm 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define FAT_ENV_INTERFACE "mmc" -#define FAT_ENV_FILE "uboot.env" -#define FAT_ENV_DEVICE_AND_PART "0" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 dtb; " \ - "fatload mmc 0:1 0x22000000 uImage; " \ - "bootm 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else #define CONFIG_ENV_IS_NOWHERE #endif
include/configs/sama5d4_xplained.h +1 -17
@@ -138,25 +138,9 @@"nand read 0x22000000 0x200000 0x600000;" \ "bootz 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define FAT_ENV_INTERFACE "mmc" -/* -* We don't specify the part number, if device 0 has partition table, it means -* the first partition; it no partition table, then take whole device as a -* FAT file system. -*/ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-sama5d4_xplained.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #endif - -/* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000
include/configs/sama5d4ek.h +1 -15
@@ -136,21 +136,7 @@"nand read 0x22000000 0x200000 0x600000;" \ "bootz 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_MMC -/* bootstrap + u-boot + env in sd card */ -#define CONFIG_ENV_IS_IN_FAT -#define CONFIG_FAT_WRITE -#define FAT_ENV_INTERFACE "mmc" -/* -* We don't specify the part number, if device 0 has partition table, it means -* the first partition; it no partition table, then take whole device as a -* FAT file system. -*/ -#define FAT_ENV_DEVICE_AND_PART "0" -#define FAT_ENV_FILE "uboot.env" -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 sama5d4ek.dtb; " \ - "fatload mmc 0:1 0x22000000 zImage; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for sd/mmc env */ #endif /* SPL */
Signature · 1 line
1.9.1
PATCH v2 2/4 ARM: at91: sama5d3xek: use a $dtb_name to load dtb
Since sama5d3xek boards has different type of dtb blobs, so we need to detect the cpu type in runtime.
So we add a new variable $dtb_name. if $dtb_name is not defined, we just use
at91-${board_name}.dtbas the $dtb_name. Otherwise, we will just load the dtb with
$dtb_name.
For sama5d3xek, we will detect cpu type and make up $dtb_name in runtime.
---
Changes in v2:
- fix bug on tolower loop.
- use setenv dtb_name instead
board/atmel/sama5d3xek/sama5d3xek.c | 20 ++++++++++++++++++++ include/configs/at91-sama5_common.h | 5 ++++- include/configs/sama5d3xek.h | 3 +++ 3 files changed, 27 insertions(+), 1 deletion(-)
board/atmel/sama5d3xek/sama5d3xek.c +20 -0
@@ -15,6 +15,7 @@#include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <lcd.h> +#include <linux/ctype.h> #include <atmel_hlcdc.h> #include <atmel_mci.h> #include <phy.h>
@@ -369,6 +370,25 @@ void spi_cs_deactivate(struct spi_slave *slave) }#endif /* CONFIG_ATMEL_SPI */ +#ifdef CONFIG_BOARD_LATE_INIT +int board_late_init (void ) +{ +#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +const int MAX_STR_LEN =32 ; +char name[MAX_STR_LEN ], *p; +int i; + +strncpy (name,get_cpu_name (),MAX_STR_LEN ); +for (i =0 , p = name; (*p) && (i <MAX_STR_LEN ); p++, i++) + *p =tolower (*p); + +strcat (name,"ek.dtb" ); +setenv ("dtb_name" , name); +#endif +return 0 ; +} +#endif +/* SPL */ #ifdef CONFIG_SPL_BUILD void spl_board_init (void )
include/configs/at91-sama5_common.h +4 -1
@@ -61,7 +61,10 @@#define FAT_ENV_FILE "uboot.env"#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91-${board_name}.dtb; " \ +#define CONFIG_BOOTCOMMAND "if test ! -n ${dtb_name}; then " \ + "setenv dtb_name at91-${board_name}.dtb; " \ + "fi; " \ + "fatload mmc 0:1 0x21000000 ${dtb_name}; " \ "fatload mmc 0:1 0x22000000 zImage; " \ "bootz 0x22000000 - 0x21000000"#define CONFIG_BOOTARGS \
include/configs/sama5d3xek.h +3 -0
@@ -19,6 +19,9 @@*/ #include "at91-sama5_common.h" +#define CONFIG_BOARD_LATE_INIT +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +/* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_DBGU
Signature · 1 line
1.9.1
PATCH v2 2/4 ARM: at91: sama5d3xek: use a $dtb_name to load dtb
Dear "Wu, Josh",
Quoted 15 lines · Josh Wu
Since sama5d3xek boards has different type of dtb blobs, so we need to detect the cpu type in runtime.
So we add a new variable $dtb_name. if $dtb_name is not defined, we just use
at91-${board_name}.dtbas the $dtb_name. Otherwise, we will just load the dtb with
$dtb_name.For sama5d3xek, we will detect cpu type and make up $dtb_name in runtime.
Signed-off-by Josh Wu <[email protected]>---
Quoted 8 lines
Changes in v2:
- fix bug on tolower loop.
- use setenvdtb_nameinsteadboard/atmel/sama5d3xek/sama5d3xek.c | 20 ++++++++++++++++++++ include/configs/at91-sama5_common.h | 5 ++++- include/configs/sama5d3xek.h | 3 +++ 3 files changed, 27 insertions(+), 1 deletion(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann
PATCH v2 3/4 ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h
In reply to Josh WuAs all sama5 nandflash env configurations are same, so move them to at91-sama5_common.h.
---
Changes in v2: None
include/configs/at91-sama5_common.h | 12 ++++++++++++ include/configs/sama5d3_xplained.h | 9 +-------- include/configs/sama5d3xek.h | 9 +-------- include/configs/sama5d4_xplained.h | 9 +-------- include/configs/sama5d4ek.h | 9 +-------- 5 files changed, 16 insertions(+), 32 deletions(-)
include/configs/at91-sama5_common.h +12 -0
@@ -77,6 +77,18 @@"256K(env),256k(env_redundent),256k(spare)," \"512k(dtb),6M(kernel)ro,-(rootfs) " \ "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" + +#ifdef CONFIG_SYS_USE_NANDFLASH +/* u-boot env in nand flash */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0xc0000 +#define CONFIG_ENV_OFFSET_REDUND 0x100000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ + "nand read 0x22000000 0x200000 0x600000;" \ + "bootz 0x22000000 - 0x21000000" +#endif +#endif #define CONFIG_BAUDRATE 115200
include/configs/sama5d3_xplained.h +1 -8
@@ -115,14 +115,7 @@#define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */ #if CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env */ #elif CONFIG_SYS_USE_MMC /* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else
include/configs/sama5d3xek.h +1 -8
@@ -165,14 +165,7 @@"sf read 0x22000000 0x42000 0x300000; " \ "bootm 0x22000000"#elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootm 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration nandflash env */ #elif CONFIG_SYS_USE_MMC /* override the bootcmd, bootargs and other configuration for sd/mmc env */ #else
include/configs/sama5d4_xplained.h +1 -8
@@ -129,14 +129,7 @@"sf read 0x22000000 0x100000 0x300000; " \ "bootz 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env */ #elif CONFIG_SYS_USE_MMC /* override the bootcmd, bootargs and other configuration for sd/mmc env */ #endif
include/configs/sama5d4ek.h +1 -8
@@ -127,14 +127,7 @@"sf read 0x22000000 0x100000 0x300000; " \ "bootz 0x22000000 - 0x21000000"#elif CONFIG_SYS_USE_NANDFLASH -/* bootstrap + u-boot + env in nandflash */ -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_OFFSET 0xc0000 -#define CONFIG_ENV_OFFSET_REDUND 0x100000 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ - "nand read 0x22000000 0x200000 0x600000;" \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for nandflash env*/ #elif CONFIG_SYS_USE_MMC /* override the bootcmd, bootargs and other configuration for sd/mmc env */ #endif
Signature · 1 line
1.9.1
PATCH v2 3/4 ARM: at91: sama5: move the nandflash env config to at91-sama5_common.h
Dear "Wu, Josh",
Quoted 6 lines · Josh Wu
As all sama5 nandflash env configurations are same, so move them to
at91-sama5_common.h.Signed-off-by Josh Wu <[email protected]>---
Quoted 8 lines
Changes in v2: None
include/configs/at91-sama5_common.h | 12 ++++++++++++ include/configs/sama5d3_xplained.h | 9 +-------- include/configs/sama5d3xek.h | 9 +-------- include/configs/sama5d4_xplained.h | 9 +-------- include/configs/sama5d4ek.h | 9 +-------- 5 files changed, 16 insertions(+), 32 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann
PATCH v2 4/4 ARM: at91: sama5: update the spi flash mapping
In reply to Josh WuFrom: "Wu, Josh" <[email protected]>
Also move the spi flash configurations to the at91-sama5_common.h.
Current at91 zImage size is about 3.3M, the old mapping is not suitable. So update the spi flash map as following:
0x0 ~ 0x004000: at91bootstrap(16k) 0x04000 ~ 0x008000: u-boot env(16k) 0x08000 ~ 0x060000: u-boot(352k) 0x60000 ~ 0x06c000: dtb (48k) 0x6c000 ~ 0x400000: kernel (3M+592k)
In AT91Bootstrap, the U-Boot in spi flash also update to 0x8000, refer to following commit in AT91Bootstrap:
3e91e54 Kconfig: fix spi flash address
So also update SPL's u-boot load address to 0x8000 in spi flash.
---
Changes in v2:
- collect the reviewed-by tag from Jagan Teki.
include/configs/at91-sama5_common.h | 10 ++++++++++ include/configs/sama5d3xek.h | 11 ++--------- include/configs/sama5d4_xplained.h | 14 ++------------ include/configs/sama5d4ek.h | 14 ++------------ 4 files changed, 16 insertions(+), 33 deletions(-)
include/configs/at91-sama5_common.h +10 -0
@@ -87,6 +87,16 @@#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0x180000 0x80000;" \ "nand read 0x22000000 0x200000 0x600000;" \ "bootz 0x22000000 - 0x21000000" +#elif CONFIG_SYS_USE_SERIALFLASH +/* u-boot env in serial flash, by default is bus 0 and cs 0 */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x4000 +#define CONFIG_ENV_SIZE 0x4000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_BOOTCOMMAND "sf probe 0; " \ + "sf read 0x21000000 0x60000 0xc000; " \ + "sf read 0x22000000 0x6c000 0x394000; " \ + "bootz 0x22000000 - 0x21000000"#endif #endif
include/configs/sama5d3xek.h +2 -9
@@ -156,14 +156,7 @@#define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */ #ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_OFFSET 0x5000 -#define CONFIG_ENV_SIZE 0x3000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x22000000 0x42000 0x300000; " \ - "bootm 0x22000000" +/* override the bootcmd, bootargs and other configuration for spi flash env*/ #elif CONFIG_SYS_USE_NANDFLASH /* override the bootcmd, bootargs and other configuration nandflash env */ #elif CONFIG_SYS_USE_MMC
@@ -216,7 +209,7 @@#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#endif
include/configs/sama5d4_xplained.h +2 -12
@@ -117,17 +117,7 @@#endif #ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0xa0000 0x60000; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for spi flash env */ #elif CONFIG_SYS_USE_NANDFLASH /* override the bootcmd, bootargs and other configuration for nandflash env */ #elif CONFIG_SYS_USE_MMC
@@ -180,7 +170,7 @@#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#endif #endif
include/configs/sama5d4ek.h +2 -12
@@ -115,17 +115,7 @@#define CONFIG_SYS_CONSOLE_IS_IN_ENV #ifdef CONFIG_SYS_USE_SERIALFLASH -/* bootstrap + u-boot + env + linux in serial flash */ -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS -#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS -#define CONFIG_ENV_OFFSET 0x10000 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x1000 -#define CONFIG_BOOTCOMMAND "sf probe 0; " \ - "sf read 0x21000000 0xa0000 0x60000; " \ - "sf read 0x22000000 0x100000 0x300000; " \ - "bootz 0x22000000 - 0x21000000" +/* override the bootcmd, bootargs and other configuration for spi flash env*/ #elif CONFIG_SYS_USE_NANDFLASH /* override the bootcmd, bootargs and other configuration for nandflash env*/ #elif CONFIG_SYS_USE_MMC
@@ -178,7 +168,7 @@#define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000#endif #endif
Signature · 1 line
1.9.1
PATCH v2 4/4 ARM: at91: sama5: update the spi flash mapping
Dear "Wu, Josh",
Quoted 22 lines · Josh Wu
From: "Wu, Josh" <[email protected]>
Also move the spi flash configurations to the
at91-sama5_common.h.Current at91 zImage size is about 3.3M, the old mapping is not suitable. So update the spi flash map as following:
0x0 ~ 0x004000: at91bootstrap(16k) 0x04000 ~ 0x008000: u-boot env(16k) 0x08000 ~ 0x060000: u-boot(352k) 0x60000 ~ 0x06c000: dtb (48k) 0x6c000 ~ 0x400000: kernel (3M+592k)In AT91Bootstrap, the U-Boot in spi flash also update to
0x8000, refer to following commit in AT91Bootstrap:
3e91e54Kconfig: fix spi flash addressSo also update SPL's u-boot load address to
0x8000in spi flash.Signed-off-by Josh Wu <[email protected]>Reviewed-by Jagan Teki <[email protected]>---
Quoted 8 lines
Changes in v2:
- collect the reviewed-by tag from Jagan Teki.include/configs/at91-sama5_common.h | 10 ++++++++++ include/configs/sama5d3xek.h | 11 ++--------- include/configs/sama5d4_xplained.h | 14 ++------------ include/configs/sama5d4ek.h | 14 ++------------ 4 files changed, 16 insertions(+), 33 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann
PATCH v2 1/4 ARM: at91: sama5: move the sd/mmc env config to at91-sama5_common.h
In reply to Josh WuDear "Wu, Josh",
Quoted 15 lines · Josh Wu
As almost all sama5 sd/mmc env configurations are same, so move them to
at91-sama5_common.h.Also define
CONFIG_ENV_VARS_UBOOT_CONFIGto have the varaible: $board_name. Then we can use 'at91-${board_name}.dtb' as the dtb name.TODO: since sama5d3xek has different dtb name, we need to some extra stuff to make it work on sama5d3xek boards.
Signed-off-by Josh Wu <[email protected]>---
Changes in v2:
- useCONFIG_ENV_VARS_UBOOT_CONFIGinstead thanks to Andreas.
Quoted 6 lines
include/configs/at91-sama5_common.h | 12 ++++++++++++ include/configs/sama5d3_xplained.h | 10 +--------- include/configs/sama5d3xek.h | 10 +--------- include/configs/sama5d4_xplained.h | 18 +----------------- include/configs/sama5d4ek.h | 16 +--------------- 5 files changed, 16 insertions(+), 50 deletions(-)
applied to u-boot-atmel/master, thanks!
Best regards,
Andreas Bie?mann