iio: bmg160: Add SPI connection
v4 cover iio: bmg160: Add SPI connection
Hi,
These are the remaining two patches for the bmg160 driver. These split core driver from the I2C part and add the SPI regmap setup as separate driver.
Changes in v4:
- Fixed include of bmg160 header
- Changed Kconfig/Makefile setup to automatically select I2C and SPI drivers dependending on the configurations state of the subsystems. The core driver is compiled once and can be a module now.
Best regards,
Markus
Markus Pargmann (2):
iio: bmg160: Separate i2c and core driver
iio: bmg160: Add SPI driver
drivers/iio/gyro/Kconfig | 20 +++++--
drivers/iio/gyro/Makefile | 4 +-
drivers/iio/gyro/bmg160.h | 10 ++++
drivers/iio/gyro/{bmg160.c => bmg160_core.c} | 79 +++++-----------------------
drivers/iio/gyro/bmg160_i2c.c | 71 +++++++++++++++++++++++++
drivers/iio/gyro/bmg160_spi.c | 57 ++++++++++++++++++++
6 files changed, 170 insertions(+), 71 deletions(-)
create mode 100644 drivers/iio/gyro/bmg160.h
rename drivers/iio/gyro/{bmg160.c => bmg160_core.c} (94%)
create mode 100644 drivers/iio/gyro/bmg160_i2c.c
create mode 100644 drivers/iio/gyro/bmg160_spi.cSignature · 1 line
2.4.6
PATCH v4 1/2 iio: bmg160: Separate i2c and core driver
This patch separates the core driver using regmap and the i2c driver which creates the i2c regmap. Also in the Kconfig file BMG160 and BMG160_I2C are separate now.
---
drivers/iio/gyro/Kconfig | 15 ++++--
drivers/iio/gyro/Makefile | 3 +-
drivers/iio/gyro/bmg160.h | 10 ++++
drivers/iio/gyro/{bmg160.c => bmg160_core.c} | 79 +++++-----------------------
drivers/iio/gyro/bmg160_i2c.c | 71 +++++++++++++++++++++++++
5 files changed, 107 insertions(+), 71 deletions(-)
create mode 100644 drivers/iio/gyro/bmg160.h
rename drivers/iio/gyro/{bmg160.c => bmg160_core.c} (94%)
create mode 100644 drivers/iio/gyro/bmg160_i2c.cdrivers/iio/gyro/Kconfig +10 -5
@@ -52,16 +52,21 @@ config ADXRS450 config BMG160 tristate "BOSCH BMG160 Gyro Sensor" - depends on I2C + depends on (I2C || SPI_MASTER) select IIO_BUFFER select IIO_TRIGGERED_BUFFER - select REGMAP_I2C + select BMG160_I2C if (I2C) help - Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor - driver. This driver also supports BMI055 gyroscope. + Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor + driver connected via I2C or SPI. This driver also supports BMI055 + gyroscope. This driver can also be built as a module. If so, the module - will be called bmg160. + will be called bmg160_i2c. + +config BMG160_I2C + tristate + select REGMAP_I2C config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUB
drivers/iio/gyro/Makefile +2 -1
@@ -8,7 +8,8 @@ obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16136) += adis16136.o obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADXRS450) += adxrs450.o -obj-$(CONFIG_BMG160) += bmg160.o +obj-$(CONFIG_BMG160) += bmg160_core.o +obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
drivers/iio/gyro/bmg160.h new file +10 -0
@@ -0,0 +1,10 @@ +#ifndef BMG160_H_ +#define BMG160_H_ + +extern const struct dev_pm_ops bmg160_pm_ops; + +int bmg160_core_probe (struct device *dev,struct regmap *regmap,int irq, +const char *name); +void bmg160_core_remove (struct device *dev); + +#endif /* BMG160_H_ */
drivers/iio/gyro/bmg160_core.c renamed from drivers/iio/gyro/bmg160.c +14 -65
144 lines not on this page · raw message
drivers/iio/gyro/bmg160_i2c.c new file +71 -0
71 lines not on this page · raw message
Signature · 1 line
2.4.6
Re: [PATCH v4 1/2] iio: bmg160: Separate i2c and core driver
Quoted 5 lines · Markus Pargmann
This patch separates the core driver using regmap and the i2c driver which creates the i2c regmap. Also in the
Kconfigfile BMG160 andBMG160_I2Care separate now.Signed-off-by Markus Pargmann <[email protected]>
Hi Markus,
This didn't exactly go in cleanly.
THe resulting core driver had no author or licence block so I put that back from the original. Also as bmg160.h was not included in that driver, All sorts of fun warnings about non static, not exported symbols came up. Added in the #include "bmg160.h"
There was also some fuzz in the driver. Could you check it went in correctly for me?
Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it.
I also took the view that the changes in how it was built were not an issue for taking Srinivas' previous reviewed-by and so applied that as well.
Thanks,
Jonathan
Quoted 309 lines
--- drivers/iio/gyro/Kconfig | 15 ++++-- drivers/iio/gyro/Makefile | 3 +- drivers/iio/gyro/bmg160.h | 10 ++++ drivers/iio/gyro/{bmg160.c => bmg160_core.c} | 79 +++++----------------------- drivers/iio/gyro/bmg160_i2c.c | 71 +++++++++++++++++++++++++ 5 files changed, 107 insertions(+), 71 deletions(-) create mode 100644 drivers/iio/gyro/bmg160.h rename drivers/iio/gyro/{bmg160.c => bmg160_core.c} (94%) create mode 100644 drivers/iio/gyro/bmg160_i2c.cdrivers/iio/gyro/Kconfig +10
-5@@ -52,16 +52,21 @@ config ADXRS450 config BMG160 tristate "BOSCH BMG160 Gyro Sensor" - depends on I2C + depends on (I2C || SPI_MASTER) select IIO_BUFFER select IIO_TRIGGERED_BUFFER - select REGMAP_I2C + select BMG160_I2C if (I2C) help - Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor - driver. This driver also supports BMI055 gyroscope. + Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor + driver connected via I2C or SPI. This driver also supports BMI055 + gyroscope. This driver can also be built as a module. If so, the module - will be called bmg160. + will be called bmg160_i2c. + +config BMG160_I2C + tristate + select REGMAP_I2C config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUBdrivers/iio/gyro/Makefile +2
-1@@ -8,7 +8,8 @@ obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16136) += adis16136.o obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADXRS450) += adxrs450.o -obj-$(CONFIG_BMG160) += bmg160.o +obj-$(CONFIG_BMG160) += bmg160_core.o +obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.odrivers/iio/gyro/bmg160.h new file +10
-0@@ -0,0 +1,10 @@ +#ifndef BMG160_H_ +#define BMG160_H_ + +extern const struct dev_pm_ops bmg160_pm_ops; + +int bmg160_core_probe (struct device *dev,struct regmap *regmap,int irq, +const char *name); +void bmg160_core_remove (struct device *dev); + +#endif /* BMG160_H_ */ drivers/iio/gyro/bmg160_core.c renamed from drivers/iio/gyro/bmg160.c +14
-65@@ -13,7 +13,6 @@*/ #include <linux/module.h> -#include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/slab.h> @@ -30,7 +29,6 @@#include <linux/iio/triggered_buffer.h> #include <linux/regmap.h> -#define BMG160_DRV_NAME "bmg160"#define BMG160_IRQ_NAME "bmg160_event"#define BMG160_GPIO_NAME "gpio_int"@@ -137,12 +135,6 @@ static const struct { { 133, BMG160_RANGE_250DPS}, { 66, BMG160_RANGE_125DPS} }; -struct regmap_config bmg160_regmap_i2c_conf = { - .reg_bits =8 , - .val_bits =8 , - .max_register =0x3f -}; -static int bmg160_set_mode (struct bmg160_data *data,u8 mode) {int ret;@@ -996,31 +988,22 @@ static const char *bmg160_match_acpi_device(struct device *dev)return dev_name (dev); } -static int bmg160_probe (struct i2c_client *client, -const struct i2c_device_id *id) +int bmg160_core_probe (struct device *dev,struct regmap *regmap,int irq, +const char *name) {struct bmg160_data *data;struct iio_dev *indio_dev;int ret; -const char *name =NULL ; -struct regmap *regmap; -struct device *dev = &client->dev; - - regmap =devm_regmap_init_i2c (client, &bmg160_regmap_i2c_conf); -if (IS_ERR (regmap)) { -dev_err (&client->dev,"Failed to register i2c regmap %d\n" , - (int )PTR_ERR (regmap)); -return PTR_ERR (regmap); - } - indio_dev =devm_iio_device_alloc (&client->dev,sizeof (*data)); + indio_dev =devm_iio_device_alloc (dev,sizeof (*data));if (!indio_dev)return -ENOMEM ; data =iio_priv (indio_dev);dev_set_drvdata (dev, indio_dev); data->dev = dev; - data->irq = client->irq; + data->irq = irq; + data->regmap = regmap; ret =bmg160_chip_init (data);if (ret <0 )@@ -1028,9 +1011,6 @@ static int bmg160_probe(struct i2c_client *client,mutex_init (&data->mutex); -if (id) - name = id->name; -if (ACPI_HANDLE (dev)) name =bmg160_match_acpi_device (dev);@@ -1125,15 +1105,16 @@ err_trigger_unregister:return ret; } +EXPORT_SYMBOL_GPL (bmg160_core_probe); -static int bmg160_remove (struct i2c_client *client) +void bmg160_core_remove (struct device *dev) { -struct iio_dev *indio_dev =i2c_get_clientdata (client); +struct iio_dev *indio_dev =dev_get_drvdata (dev);struct bmg160_data *data =iio_priv (indio_dev); -pm_runtime_disable (&client->dev); -pm_runtime_set_suspended (&client->dev); -pm_runtime_put_noidle (&client->dev); +pm_runtime_disable (dev); +pm_runtime_set_suspended (dev); +pm_runtime_put_noidle (dev);iio_device_unregister (indio_dev);iio_triggered_buffer_cleanup (indio_dev);@@ -1146,9 +1127,8 @@ static int bmg160_remove(struct i2c_client *client)mutex_lock (&data->mutex);bmg160_set_mode (data,BMG160_MODE_DEEP_SUSPEND );mutex_unlock (&data->mutex); - -return 0 ; } +EXPORT_SYMBOL_GPL (bmg160_core_remove);#ifdef CONFIG_PM_SLEEP static int bmg160_suspend (struct device *dev)@@ -1210,40 +1190,9 @@ static int bmg160_runtime_resume(struct device *dev) }#endif -static const struct dev_pm_ops bmg160_pm_ops = { +const struct dev_pm_ops bmg160_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)SET_RUNTIME_PM_OPS (bmg160_runtime_suspend, bmg160_runtime_resume,NULL ) }; - -static const struct acpi_device_id bmg160_acpi_match[] = { - {"BMG0160" ,0 }, - {"BMI055B" ,0 }, - {}, -}; - -MODULE_DEVICE_TABLE (acpi, bmg160_acpi_match); - -static const struct i2c_device_id bmg160_id[] = { - {"bmg160" ,0 }, - {"bmi055_gyro" ,0 }, - {} -}; - -MODULE_DEVICE_TABLE (i2c, bmg160_id); - -static struct i2c_driver bmg160_driver = { - .driver = { - .name =BMG160_DRV_NAME , - .acpi_match_table =ACPI_PTR (bmg160_acpi_match), - .pm = &bmg160_pm_ops, - }, - .probe = bmg160_probe, - .remove = bmg160_remove, - .id_table = bmg160_id, -}; -module_i2c_driver (bmg160_driver); - -MODULE_AUTHOR ("Srinivas Pandruvada <[email protected]>" ); -MODULE_LICENSE ("GPL v2" ); -MODULE_DESCRIPTION ("BMG160 Gyro driver" ); +EXPORT_SYMBOL_GPL (bmg160_pm_ops);drivers/iio/gyro/bmg160_i2c.c new file +71
-0@@ -0,0 +1,71 @@ +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/acpi.h> + +#include "bmg160.h" + +static const struct regmap_config bmg160_regmap_i2c_conf = { + .reg_bits =8 , + .val_bits =8 , + .max_register =0x3f +}; + +static int bmg160_i2c_probe (struct i2c_client *client, +const struct i2c_device_id *id) +{ +struct regmap *regmap; +const char *name =NULL ; + + regmap =devm_regmap_init_i2c (client, &bmg160_regmap_i2c_conf); +if (IS_ERR (regmap)) { +dev_err (&client->dev,"Failed to register i2c regmap %d\n" , + (int )PTR_ERR (regmap)); +return PTR_ERR (regmap); + } + +if (id) + name = id->name; + +return bmg160_core_probe (&client->dev, regmap, client->irq, name); +} + +static int bmg160_i2c_remove (struct i2c_client *client) +{ +bmg160_core_remove (&client->dev); + +return 0 ; +} + +static const struct acpi_device_id bmg160_acpi_match[] = { + {"BMG0160" ,0 }, + {"BMI055B" ,0 }, + {}, +}; + +MODULE_DEVICE_TABLE (acpi, bmg160_acpi_match); + +static const struct i2c_device_id bmg160_i2c_id[] = { + {"bmg160" ,0 }, + {"bmi055_gyro" ,0 }, + {} +}; + +MODULE_DEVICE_TABLE (i2c, bmg160_i2c_id); + +static struct i2c_driver bmg160_i2c_driver = { + .driver = { + .name ="bmg160_i2c" , + .acpi_match_table =ACPI_PTR (bmg160_acpi_match), + .pm = &bmg160_pm_ops, + }, + .probe = bmg160_i2c_probe, + .remove = bmg160_i2c_remove, + .id_table = bmg160_i2c_id, +}; +module_i2c_driver (bmg160_i2c_driver); + +MODULE_AUTHOR ("Srinivas Pandruvada <[email protected]>" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DESCRIPTION ("BMG160 I2C Gyro driver" );
Re: [PATCH v4 1/2] iio: bmg160: Separate i2c and core driver
Hi Jonathon,
Sorry for the late response I was on vacation.
Quoted 15 lines · Jonathan Cameron
Quoted 5 lines · Markus Pargmann
This patch separates the core driver using regmap and the i2c driver which creates the i2c regmap. Also in the
Kconfigfile BMG160 andBMG160_I2Care separate now.Signed-off-by Markus Pargmann <[email protected]>Hi Markus,
This didn't exactly go in cleanly.
THe resulting core driver had no author or licence block so I put that back from the original. Also asbmg160.hwas not included in that driver, All sorts of fun warnings about non static, not exported symbols came up. Added in the #include "bmg160.h"
Quoted 2 lines
There was also some fuzz in the driver. Could you check it went in correctly for me?
Thanks. I just looked at it and it seems to be correct.
Best Regards,
Markus
Quoted 323 lines
Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it.
I also took the view that the changes in how it was built were not an issue for taking Srinivas' previous reviewed-by and so applied that as well.
Thanks,
Jonathan
Quoted 309 lines
--- drivers/iio/gyro/Kconfig | 15 ++++-- drivers/iio/gyro/Makefile | 3 +- drivers/iio/gyro/bmg160.h | 10 ++++ drivers/iio/gyro/{bmg160.c => bmg160_core.c} | 79 +++++----------------------- drivers/iio/gyro/bmg160_i2c.c | 71 +++++++++++++++++++++++++ 5 files changed, 107 insertions(+), 71 deletions(-) create mode 100644 drivers/iio/gyro/bmg160.h rename drivers/iio/gyro/{bmg160.c => bmg160_core.c} (94%) create mode 100644 drivers/iio/gyro/bmg160_i2c.cdrivers/iio/gyro/Kconfig +10
-5@@ -52,16 +52,21 @@ config ADXRS450 config BMG160 tristate "BOSCH BMG160 Gyro Sensor" - depends on I2C + depends on (I2C || SPI_MASTER) select IIO_BUFFER select IIO_TRIGGERED_BUFFER - select REGMAP_I2C + select BMG160_I2C if (I2C) help - Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor - driver. This driver also supports BMI055 gyroscope. + Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor + driver connected via I2C or SPI. This driver also supports BMI055 + gyroscope. This driver can also be built as a module. If so, the module - will be called bmg160. + will be called bmg160_i2c. + +config BMG160_I2C + tristate + select REGMAP_I2C config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUBdrivers/iio/gyro/Makefile +2
-1@@ -8,7 +8,8 @@ obj-$(CONFIG_ADIS16130) += adis16130.o obj-$(CONFIG_ADIS16136) += adis16136.o obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADXRS450) += adxrs450.o -obj-$(CONFIG_BMG160) += bmg160.o +obj-$(CONFIG_BMG160) += bmg160_core.o +obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.odrivers/iio/gyro/bmg160.h new file +10
-0@@ -0,0 +1,10 @@ +#ifndef BMG160_H_ +#define BMG160_H_ + +extern const struct dev_pm_ops bmg160_pm_ops; + +int bmg160_core_probe (struct device *dev,struct regmap *regmap,int irq, +const char *name); +void bmg160_core_remove (struct device *dev); + +#endif /* BMG160_H_ */ drivers/iio/gyro/bmg160_core.c renamed from drivers/iio/gyro/bmg160.c +14
-65@@ -13,7 +13,6 @@*/ #include <linux/module.h> -#include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/slab.h> @@ -30,7 +29,6 @@#include <linux/iio/triggered_buffer.h> #include <linux/regmap.h> -#define BMG160_DRV_NAME "bmg160"#define BMG160_IRQ_NAME "bmg160_event"#define BMG160_GPIO_NAME "gpio_int"@@ -137,12 +135,6 @@ static const struct { { 133, BMG160_RANGE_250DPS}, { 66, BMG160_RANGE_125DPS} }; -struct regmap_config bmg160_regmap_i2c_conf = { - .reg_bits =8 , - .val_bits =8 , - .max_register =0x3f -}; -static int bmg160_set_mode (struct bmg160_data *data,u8 mode) {int ret;@@ -996,31 +988,22 @@ static const char *bmg160_match_acpi_device(struct device *dev)return dev_name (dev); } -static int bmg160_probe (struct i2c_client *client, -const struct i2c_device_id *id) +int bmg160_core_probe (struct device *dev,struct regmap *regmap,int irq, +const char *name) {struct bmg160_data *data;struct iio_dev *indio_dev;int ret; -const char *name =NULL ; -struct regmap *regmap; -struct device *dev = &client->dev; - - regmap =devm_regmap_init_i2c (client, &bmg160_regmap_i2c_conf); -if (IS_ERR (regmap)) { -dev_err (&client->dev,"Failed to register i2c regmap %d\n" , - (int )PTR_ERR (regmap)); -return PTR_ERR (regmap); - } - indio_dev =devm_iio_device_alloc (&client->dev,sizeof (*data)); + indio_dev =devm_iio_device_alloc (dev,sizeof (*data));if (!indio_dev)return -ENOMEM ; data =iio_priv (indio_dev);dev_set_drvdata (dev, indio_dev); data->dev = dev; - data->irq = client->irq; + data->irq = irq; + data->regmap = regmap; ret =bmg160_chip_init (data);if (ret <0 )@@ -1028,9 +1011,6 @@ static int bmg160_probe(struct i2c_client *client,mutex_init (&data->mutex); -if (id) - name = id->name; -if (ACPI_HANDLE (dev)) name =bmg160_match_acpi_device (dev);@@ -1125,15 +1105,16 @@ err_trigger_unregister:return ret; } +EXPORT_SYMBOL_GPL (bmg160_core_probe); -static int bmg160_remove (struct i2c_client *client) +void bmg160_core_remove (struct device *dev) { -struct iio_dev *indio_dev =i2c_get_clientdata (client); +struct iio_dev *indio_dev =dev_get_drvdata (dev);struct bmg160_data *data =iio_priv (indio_dev); -pm_runtime_disable (&client->dev); -pm_runtime_set_suspended (&client->dev); -pm_runtime_put_noidle (&client->dev); +pm_runtime_disable (dev); +pm_runtime_set_suspended (dev); +pm_runtime_put_noidle (dev);iio_device_unregister (indio_dev);iio_triggered_buffer_cleanup (indio_dev);@@ -1146,9 +1127,8 @@ static int bmg160_remove(struct i2c_client *client)mutex_lock (&data->mutex);bmg160_set_mode (data,BMG160_MODE_DEEP_SUSPEND );mutex_unlock (&data->mutex); - -return 0 ; } +EXPORT_SYMBOL_GPL (bmg160_core_remove);#ifdef CONFIG_PM_SLEEP static int bmg160_suspend (struct device *dev)@@ -1210,40 +1190,9 @@ static int bmg160_runtime_resume(struct device *dev) }#endif -static const struct dev_pm_ops bmg160_pm_ops = { +const struct dev_pm_ops bmg160_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)SET_RUNTIME_PM_OPS (bmg160_runtime_suspend, bmg160_runtime_resume,NULL ) }; - -static const struct acpi_device_id bmg160_acpi_match[] = { - {"BMG0160" ,0 }, - {"BMI055B" ,0 }, - {}, -}; - -MODULE_DEVICE_TABLE (acpi, bmg160_acpi_match); - -static const struct i2c_device_id bmg160_id[] = { - {"bmg160" ,0 }, - {"bmi055_gyro" ,0 }, - {} -}; - -MODULE_DEVICE_TABLE (i2c, bmg160_id); - -static struct i2c_driver bmg160_driver = { - .driver = { - .name =BMG160_DRV_NAME , - .acpi_match_table =ACPI_PTR (bmg160_acpi_match), - .pm = &bmg160_pm_ops, - }, - .probe = bmg160_probe, - .remove = bmg160_remove, - .id_table = bmg160_id, -}; -module_i2c_driver (bmg160_driver); - -MODULE_AUTHOR ("Srinivas Pandruvada <[email protected]>" ); -MODULE_LICENSE ("GPL v2" ); -MODULE_DESCRIPTION ("BMG160 Gyro driver" ); +EXPORT_SYMBOL_GPL (bmg160_pm_ops);drivers/iio/gyro/bmg160_i2c.c new file +71
-0@@ -0,0 +1,71 @@ +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/module.h> +#include <linux/acpi.h> + +#include "bmg160.h" + +static const struct regmap_config bmg160_regmap_i2c_conf = { + .reg_bits =8 , + .val_bits =8 , + .max_register =0x3f +}; + +static int bmg160_i2c_probe (struct i2c_client *client, +const struct i2c_device_id *id) +{ +struct regmap *regmap; +const char *name =NULL ; + + regmap =devm_regmap_init_i2c (client, &bmg160_regmap_i2c_conf); +if (IS_ERR (regmap)) { +dev_err (&client->dev,"Failed to register i2c regmap %d\n" , + (int )PTR_ERR (regmap)); +return PTR_ERR (regmap); + } + +if (id) + name = id->name; + +return bmg160_core_probe (&client->dev, regmap, client->irq, name); +} + +static int bmg160_i2c_remove (struct i2c_client *client) +{ +bmg160_core_remove (&client->dev); + +return 0 ; +} + +static const struct acpi_device_id bmg160_acpi_match[] = { + {"BMG0160" ,0 }, + {"BMI055B" ,0 }, + {}, +}; + +MODULE_DEVICE_TABLE (acpi, bmg160_acpi_match); + +static const struct i2c_device_id bmg160_i2c_id[] = { + {"bmg160" ,0 }, + {"bmi055_gyro" ,0 }, + {} +}; + +MODULE_DEVICE_TABLE (i2c, bmg160_i2c_id); + +static struct i2c_driver bmg160_i2c_driver = { + .driver = { + .name ="bmg160_i2c" , + .acpi_match_table =ACPI_PTR (bmg160_acpi_match), + .pm = &bmg160_pm_ops, + }, + .probe = bmg160_i2c_probe, + .remove = bmg160_i2c_remove, + .id_table = bmg160_i2c_id, +}; +module_i2c_driver (bmg160_i2c_driver); + +MODULE_AUTHOR ("Srinivas Pandruvada <[email protected]>" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DESCRIPTION ("BMG160 I2C Gyro driver" );
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
PATCH v4 2/2 iio: bmg160: Add SPI driver
In reply to Markus Pargmann--- drivers/iio/gyro/Kconfig | 7 +++++- drivers/iio/gyro/Makefile | 1 + drivers/iio/gyro/bmg160_spi.c | 57 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/gyro/bmg160_spi.c
drivers/iio/gyro/Kconfig +6 -1
@@ -56,18 +56,23 @@ config BMG160 select IIO_BUFFER select IIO_TRIGGERED_BUFFER select BMG160_I2C if (I2C) + select BMG160_SPI if (SPI) help Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor driver connected via I2C or SPI. This driver also supports BMI055 gyroscope. This driver can also be built as a module. If so, the module - will be called bmg160_i2c. + will be called bmg160_i2c or bmg160_spi. config BMG160_I2C tristate select REGMAP_I2C +config BMG160_SPI + tristate + select REGMAP_SPI + config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUB select IIO_BUFFER
drivers/iio/gyro/Makefile +1 -0
@@ -10,6 +10,7 @@ obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_BMG160) += bmg160_core.o obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o +obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
drivers/iio/gyro/bmg160_spi.c new file +57 -0
57 lines not on this page · raw message
Signature · 1 line
2.4.6
Jonathan Cameron
maintainerRe: [PATCH v4 2/2] iio: bmg160: Add SPI driver
Quoted 1 line · Markus Pargmann
Signed-off-by Markus Pargmann <[email protected]>
Applied to the togreg branch of iio.git - initially pushed out as testing for the autobuilders to play with it.
Thanks,
Jonathan
Quoted 112 lines
--- drivers/iio/gyro/Kconfig | 7 +++++- drivers/iio/gyro/Makefile | 1 + drivers/iio/gyro/bmg160_spi.c | 57 +++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 64 insertions(+), 1 deletion(-) create mode 100644 drivers/iio/gyro/bmg160_spi.cdrivers/iio/gyro/Kconfig +6
-1@@ -56,18 +56,23 @@ config BMG160 select IIO_BUFFER select IIO_TRIGGERED_BUFFER select BMG160_I2C if (I2C) + select BMG160_SPI if (SPI) help Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor driver connected via I2C or SPI. This driver also supports BMI055 gyroscope. This driver can also be built as a module. If so, the module - will be called bmg160_i2c. + will be called bmg160_i2c or bmg160_spi. config BMG160_I2C tristate select REGMAP_I2C +config BMG160_SPI + tristate + select REGMAP_SPI + config HID_SENSOR_GYRO_3D depends on HID_SENSOR_HUB select IIO_BUFFERdrivers/iio/gyro/Makefile +1
-0@@ -10,6 +10,7 @@ obj-$(CONFIG_ADIS16260) += adis16260.o obj-$(CONFIG_ADXRS450) += adxrs450.o obj-$(CONFIG_BMG160) += bmg160_core.o obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o +obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.odrivers/iio/gyro/bmg160_spi.c new file +57
-0@@ -0,0 +1,57 @@ +#include <linux/spi/spi.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/module.h> + +#include "bmg160.h" + +static const struct regmap_config bmg160_regmap_spi_conf = { + .reg_bits =8 , + .val_bits =8 , + .max_register =0x3f , +}; + +static int bmg160_spi_probe (struct spi_device *spi) +{ +struct regmap *regmap; +const struct spi_device_id *id =spi_get_device_id (spi); + + regmap =devm_regmap_init_spi (spi, &bmg160_regmap_spi_conf); +if (IS_ERR (regmap)) { +dev_err (&spi->dev,"Failed to register spi regmap %d\n" , + (int )PTR_ERR (regmap)); +return PTR_ERR (regmap); + } + +return bmg160_core_probe (&spi->dev, regmap, spi->irq, id->name); +} + +static int bmg160_spi_remove (struct spi_device *spi) +{ +bmg160_core_remove (&spi->dev); + +return 0 ; +} + +static const struct spi_device_id bmg160_spi_id[] = { + {"bmg160" ,0 }, + {"bmi055_gyro" ,0 }, + {} +}; + +MODULE_DEVICE_TABLE (spi, bmg160_spi_id); + +static struct spi_driver bmg160_spi_driver = { + .driver = { + .name ="bmg160_spi" , + .pm = &bmg160_pm_ops, + }, + .probe = bmg160_spi_probe, + .remove = bmg160_spi_remove, + .id_table = bmg160_spi_id, +}; +module_spi_driver (bmg160_spi_driver); + +MODULE_AUTHOR ("Markus Pargmann <[email protected]>" ); +MODULE_LICENSE ("GPL v2" ); +MODULE_DESCRIPTION ("BMG160 SPI Gyro driver" );