Skip to contentSkip to conversation

sunxi: Ampe_A76_defconfig: Add otg id pin configuration

PATCH New Hans de Goede 2 participants 4 messages Aug 25, 2015 – Aug 26, 2015

Subsystems (2)
Arm (32-bit) Arm/Allwinner sunXi SoC support
lore
Share & tools
lore

Hans de Goede

author
#0 lore raw

PATCH 1/2 sunxi: Ampe_A76_defconfig: Add otg id pin configuration

Add otg id pin configuration, this speeds up bootup when no host cable is plugged into the otg port.

Signed-off-by Hans de Goede <[email protected]>
---
 configs/Ampe_A76_defconfig | 1 +
 1 file changed, 1 insertion(+)
configs/Ampe_A76_defconfig +1 -0
index 3aaf029..85724b0 100644
@@ -5,6 +5,7 @@ CONFIG_DRAM_CLK=432
 CONFIG_MMC0_CD_PIN="PG0"
 CONFIG_USB0_VBUS_PIN="PG12"
 CONFIG_USB0_VBUS_DET="PG1"
+CONFIG_USB0_ID_DET="PG2"
 CONFIG_AXP_GPIO=y
 # CONFIG_VIDEO_HDMI is not set
 CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:18,pclk_khz:33000,le:45,ri:82,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0"
Signature · 1 line
2.4.3
author
#1 lore raw

PATCH 2/2 sunxi: Add inet98v_rev2 defconfig and dts file

The inet98v_rev2 is a pcb used in generic A13 based tablets. It features volume buttons, a power barrel, micro-usb otg, headphone connector and a power button.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by Hans de Goede <[email protected]>
---
 arch/arm/dts/Makefile                    |   1 +
 arch/arm/dts/sun5i-a13-inet-98v-rev2.dts | 236 +++++++++++++++++++++++++++++++
 board/sunxi/MAINTAINERS                  |   1 +
 3 files changed, 238 insertions(+)
 create mode 100644 arch/arm/dts/sun5i-a13-inet-98v-rev2.dts
arch/arm/dts/Makefile +1 -0
index eb10a14..3d1d37f 100644
@@ -95,6 +95,7 @@ dtb-$(CONFIG_MACH_SUN5I) += \
 	sun5i-a13-forfun-q88db.dtb \
 	sun5i-a13-hsg-h702.dtb \
 	sun5i-a13-inet-86vs.dtb \
+	sun5i-a13-inet-98v-rev2.dtb \
 	sun5i-a13-olinuxino.dtb \
 	sun5i-a13-olinuxino-micro.dtb \
 	sun5i-a13-tzx-q8-713b7.dtb \
arch/arm/dts/sun5i-a13-inet-98v-rev2.dts new file +236 -0

236 lines not on this page · raw message

board/sunxi/MAINTAINERS +1 -0
index 46a78bd..89c2c1f 100644
@@ -21,6 +21,7 @@ F:	configs/A13-OLinuXino_defconfig
 F:	configs/A13-OLinuXinoM_defconfig
 F:	configs/Auxtek-T003_defconfig
 F:	configs/Auxtek-T004_defconfig
+F:	configs/inet98v_rev2_defconfig
 F:	configs/mk802_a10s_defconfig
 F:	configs/r7-tv-dongle_defconfig
 F:	configs/UTOO_P66_defconfig
Signature · 1 line
2.4.3
#2 lore raw

PATCH 2/2 sunxi: Add inet98v_rev2 defconfig and dts file

Quoted 10 lines · Hans de Goede

The inet98v_rev2 is a pcb used in generic A13 based tablets. It features
volume buttons, a power barrel, micro-usb otg, headphone connector and
a power button.

The dts file is identical to the one submitted to the upstream kernel.

Signed-off-by Hans de Goede <[email protected]>
Acked-by Ian Campbell <[email protected]>