Skip to contentSkip to conversation

gpio: msm: Remove unused driver

PATCH In review Stephen Boyd 3 participants 3 messages Aug 28, 2015 – Sep 25, 2015

Subsystems (3)
Device tree bindings Arm Qualcomm mailing list GPIO
lore
Share & tools
lore

Stephen Boyd

author
#0 lore raw

PATCH 1/1 gpio: msm: Remove unused driver

Remove this driver now that Bjorn has introduced a pinctrl driver for msm8660 and the dts files have been updated with the pinctrl compatibles.

Cc Bjorn Andersson <[email protected]>
Cc Andy Gross <[email protected]>
Signed-off-by Stephen Boyd <[email protected]>
---
 .../devicetree/bindings/gpio/gpio-msm.txt          |  26 --
 drivers/gpio/Kconfig                               |   8 -
 drivers/gpio/Makefile                              |   1 -
 drivers/gpio/gpio-msm-v2.c                         | 453 ---------------------
 4 files changed, 488 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-msm.txt
 delete mode 100644 drivers/gpio/gpio-msm-v2.c
Documentation/devicetree/bindings/gpio/gpio-msm.txt deleted +0 -26
deleted file mode 100644
index ac20e68a004e..000000000000
@@ -1,26 +0,0 @@
-MSM GPIO controller bindings
-
-Required properties:
-- compatible:
-  - "qcom,msm-gpio" for MSM controllers
-- #gpio-cells : Should be two.
-  - first cell is the pin number
-  - second cell is used to specify optional parameters (unused)
-- gpio-controller : Marks the device node as a GPIO controller.
-- #interrupt-cells : Should be 2.
-- interrupt-controller: Mark the device node as an interrupt controller
-- interrupts : Specify the TLMM summary interrupt number
-- ngpio : Specify the number of MSM GPIOs
-
-Example:
-
-	msmgpio: gpio at fd510000 {
-		compatible = "qcom,msm-gpio";
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		reg = <0xfd510000 0x4000>;
-		interrupts = <0 208 0>;
-		ngpio = <150>;
-	};
drivers/gpio/Kconfig +0 -8
index b4fc9e4d24c6..3ddf881e0c34 100644
@@ -297,14 +297,6 @@ config GPIO_MPC8XXX
 	  Say Y here if you're going to use hardware that connects to the
 	  MPC512x/831x/834x/837x/8572/8610 GPIOs.
 
-config GPIO_MSM_V2
-	tristate "Qualcomm MSM GPIO v2"
-	depends on GPIOLIB && OF && ARCH_QCOM
-	help
-	  Say yes here to support the GPIO interface on ARM v7 based
-	  Qualcomm MSM chips.  Most of the pins on the MSM can be
-	  selected for GPIO, and are controlled by this driver.
-
 config GPIO_MVEBU
 	def_bool y
 	depends on PLAT_ORION
drivers/gpio/Makefile +0 -1
index f79a7c482a99..0d30b645965b 100644
@@ -64,7 +64,6 @@ obj-$(CONFIG_GPIO_MOXART)	+= gpio-moxart.o
 obj-$(CONFIG_GPIO_MPC5200)	+= gpio-mpc5200.o
 obj-$(CONFIG_GPIO_MPC8XXX)	+= gpio-mpc8xxx.o
 obj-$(CONFIG_GPIO_MSIC)		+= gpio-msic.o
-obj-$(CONFIG_GPIO_MSM_V2)	+= gpio-msm-v2.o
 obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o
 obj-$(CONFIG_GPIO_MXC)		+= gpio-mxc.o
 obj-$(CONFIG_GPIO_MXS)		+= gpio-mxs.o
drivers/gpio/gpio-msm-v2.c deleted +0 -453

453 lines not on this page · raw message

Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project