Skip to contentSkip to conversation

tcg/aarch64: Fix tcg_out_qemu_{ld, st} for guest_base == 0

PATCH In review Richard Henderson 3 participants 3 messages Sep 1, 2015 – Sep 3, 2015

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 tcg/aarch64: Fix tcg_out_qemu_{ld, st} for guest_base == 0

In ffc6372851d8631a9f9fa56ec613b3244dc635b9, we swapped the guest base to the address base register from the address index register. Except that 31 in the base slot is SP not XZR, so we need to be more intelligent about which reg gets placed in which slot.

Cc Paolo Bonzini <[email protected]>
Cc Aurelien Jarno <[email protected]>
Cc Richard Henderson <[email protected]>
Cc [email protected] (v2.4.0)
---
 tcg/aarch64/tcg-target.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)
tcg/aarch64/tcg-target.c +20 -7
index 01ae610..0ed10a9 100644
@@ -56,6 +56,11 @@ static const int tcg_target_call_oarg_regs[1] = {
 #define TCG_REG_TMP TCG_REG_X30
 
 #ifndef CONFIG_SOFTMMU
+/* Note that XZR cannot be encoded in the address base register slot,
+   as that actaully encodes SP.  So if we need to zero-extend the guest
+   address, via the address index register slot, we need to load even
+   a zero guest base into a register.  */
+#define USE_GUEST_BASE     (guest_base != 0 || TARGET_LONG_BITS == 32)
 #define TCG_REG_GUEST_BASE TCG_REG_X28
 #endif
 
@@ -1224,9 +1229,13 @@ static void tcg_out_qemu_ld(TCGContext *s, TCGReg data_reg, TCGReg addr_reg,
     add_qemu_ldst_label(s, true, oi, ext, data_reg, addr_reg,
                         s->code_ptr, label_ptr);
 #else /* !CONFIG_SOFTMMU */
-    tcg_out_qemu_ld_direct(s, memop, ext, data_reg,
-                           guest_base ? TCG_REG_GUEST_BASE : TCG_REG_XZR,
-                           otype, addr_reg);
+    if (USE_GUEST_BASE) {
+        tcg_out_qemu_ld_direct(s, memop, ext, data_reg,
+                               TCG_REG_GUEST_BASE, otype, addr_reg);
+    } else {
+        tcg_out_qemu_ld_direct(s, memop, ext, data_reg,
+                               addr_reg, TCG_TYPE_I64, TCG_REG_XZR);
+    }
 #endif /* CONFIG_SOFTMMU */
 }
 
@@ -1245,9 +1254,13 @@ static void tcg_out_qemu_st(TCGContext *s, TCGReg data_reg, TCGReg addr_reg,
     add_qemu_ldst_label(s, false, oi, (memop & MO_SIZE)== MO_64,
                         data_reg, addr_reg, s->code_ptr, label_ptr);
 #else /* !CONFIG_SOFTMMU */
-    tcg_out_qemu_st_direct(s, memop, data_reg,
-                           guest_base ? TCG_REG_GUEST_BASE : TCG_REG_XZR,
-                           otype, addr_reg);
+    if (USE_GUEST_BASE) {
+        tcg_out_qemu_st_direct(s, memop, data_reg,
+                               TCG_REG_GUEST_BASE, otype, addr_reg);
+    } else {
+        tcg_out_qemu_st_direct(s, memop, data_reg,
+                               addr_reg, TCG_TYPE_I64, TCG_REG_XZR);
+    }
 #endif /* CONFIG_SOFTMMU */
 }
 
@@ -1806,7 +1819,7 @@ static void tcg_target_qemu_prologue(TCGContext *s)
                   CPU_TEMP_BUF_NLONGS * sizeof(long));
 
 #if !defined(CONFIG_SOFTMMU)
-    if (guest_base) {
+    if (USE_GUEST_BASE) {
         tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_GUEST_BASE, guest_base);
         tcg_regset_set_reg(s->reserved_regs, TCG_REG_GUEST_BASE);
     }
Signature · 1 line
2.4.3
Reviewed-by on v1 1/1
#1 lore raw
Quoted 67 lines · Richard Henderson

In ffc6372851d8631a9f9fa56ec613b3244dc635b9, we swapped the guest base to the address base register from the address index register. Except that 31 in the base slot is SP not XZR, so we need to be more intelligent about which reg gets placed in which slot.

Cc Paolo Bonzini <[email protected]>
Cc Aurelien Jarno <[email protected]>
Cc Richard Henderson <[email protected]>
Cc [email protected] (v2.4.0)
---
 tcg/aarch64/tcg-target.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)
tcg/aarch64/tcg-target.c +19 -6
index 01ae610..0ed10a9 100644
@@ -56,6 +56,11 @@ static const int tcg_target_call_oarg_regs[1] = {
 #define TCG_REG_TMP TCG_REG_X30
 
 #ifndef CONFIG_SOFTMMU
+/* Note that XZR cannot be encoded in the address base register slot,
+   as that actaully encodes SP.  So if we need to zero-extend the guest
+   address, via the address index register slot, we need to load even
+   a zero guest base into a register.  */
+#define USE_GUEST_BASE     (guest_base != 0 || TARGET_LONG_BITS == 32)
 #define TCG_REG_GUEST_BASE TCG_REG_X28
 #endif
 
@@ -1224,9 +1229,13 @@ static void tcg_out_qemu_ld(TCGContext *s, TCGReg data_reg, TCGReg addr_reg,
     add_qemu_ldst_label(s, true, oi, ext, data_reg, addr_reg,
                         s->code_ptr, label_ptr);
 #else /* !CONFIG_SOFTMMU */
-    tcg_out_qemu_ld_direct(s, memop, ext, data_reg,
-                           guest_base ? TCG_REG_GUEST_BASE : TCG_REG_XZR,
-                           otype, addr_reg);
+    if (USE_GUEST_BASE) {
+        tcg_out_qemu_ld_direct(s, memop, ext, data_reg,
+                               TCG_REG_GUEST_BASE, otype, addr_reg);
+    } else {
+        tcg_out_qemu_ld_direct(s, memop, ext, data_reg,
+                               addr_reg, TCG_TYPE_I64, TCG_REG_XZR);
+    }
 #endif /* CONFIG_SOFTMMU */
 }
 
@@ -1245,9 +1254,13 @@ static void tcg_out_qemu_st(TCGContext *s, TCGReg data_reg, TCGReg addr_reg,
     add_qemu_ldst_label(s, false, oi, (memop & MO_SIZE)== MO_64,
                         data_reg, addr_reg, s->code_ptr, label_ptr);
 #else /* !CONFIG_SOFTMMU */
-    tcg_out_qemu_st_direct(s, memop, data_reg,
-                           guest_base ? TCG_REG_GUEST_BASE : TCG_REG_XZR,
-                           otype, addr_reg);
+    if (USE_GUEST_BASE) {
+        tcg_out_qemu_st_direct(s, memop, data_reg,
+                               TCG_REG_GUEST_BASE, otype, addr_reg);
+    } else {
+        tcg_out_qemu_st_direct(s, memop, data_reg,
+                               addr_reg, TCG_TYPE_I64, TCG_REG_XZR);
+    }
 #endif /* CONFIG_SOFTMMU */
 }
 

tcg/aarch64/tcg-target.c static void tcg_target_qemu_prologue(TCGContext *s) · line 1825

Quoted 8 lines
tcg/aarch64/tcg-target.c +1 -1
@@ -1806,7 +1819,7 @@ static void tcg_target_qemu_prologue(TCGContext *s)
                   CPU_TEMP_BUF_NLONGS * sizeof(long));
 
 #if !defined(CONFIG_SOFTMMU)
-    if (guest_base) {
+    if (USE_GUEST_BASE) {
         tcg_out_movi(s, TCG_TYPE_PTR, TCG_REG_GUEST_BASE, guest_base);
         tcg_regset_set_reg(s->reserved_regs, TCG_REG_GUEST_BASE);
     }
Tested-by on v1 1/1
#2 lore raw
In reply to Richard Henderson

Am 01.09.2015 um 22:07 schrieb Richard Henderson:

Quoted 11 lines

In ffc6372851d8631a9f9fa56ec613b3244dc635b9, we swapped the guest base to the address base register from the address index register. Except that 31 in the base slot is SP not XZR, so we need to be more intelligent about which reg gets placed in which slot.

Cc Paolo Bonzini <[email protected]>
Cc Aurelien Jarno <[email protected]>
Cc Richard Henderson <[email protected]>
Cc [email protected] (v2.4.0)
Quoted 3 lines
---
 tcg/aarch64/tcg-target.c | 27 ++++++++++++++++++++-------
 1 file changed, 20 insertions(+), 7 deletions(-)

Fixes my test case, thanks.

Backporting it to v2.4.0 was a little complicated due to the guest base changes though, still waiting on results from our build service there.

Regards,
Andreas

Signature · 2 lines
SUSE Linux GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Felix Imendörffer, Jane Smithard, Graham Norton; HRB 21284 (AG Nürnberg)