ARM: dts: imx6sl: Complete the dcp node
Subsystems (2)
Fabio Estevam
reviewerPATCH v2 1/1 ARM: dts: imx6sl: Complete the dcp node
From: Fabio Estevam <[email protected]>
The DCP block present on MX6SL is compatible with the one on MX28, so add the compatible string and also complete the interrupt entries.
---
Changes since v1:
- Use compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; as suggested by Lucas Stach
arch/arm/boot/dts/imx6sl.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
arch/arm/boot/dts/imx6sl.dtsi +5 -1
@@ -670,8 +670,12 @@ }; dcp: dcp at 020fc000 { + compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; - interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, + <0 100 IRQ_TYPE_LEVEL_HIGH>, + <0 101 IRQ_TYPE_LEVEL_HIGH>; + status = "okay"; }; };
Signature · 1 line
1.9.1
PATCH v2 1/1 ARM: dts: imx6sl: Complete the dcp node
Quoted 19 lines · Fabio Estevam
From: Fabio Estevam <[email protected]>
The DCP block present on MX6SL is compatible with the one on MX28, so add the compatible string and also complete the interrupt entries.
Signed-off-by Fabio Estevam <[email protected]>---
Changes since v1:
- Use compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; as suggested by Lucas Stacharch/arm/boot/dts/imx6sl.dtsi | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)arch/arm/boot/dts/imx6sl.dtsi +0
-0
arch/arm/boot/dts/imx6sl.dtsi line 678
Quoted 10 lines
arch/arm/boot/dts/imx6sl.dtsi +5
-1@@ -670,8 +670,12 @@ }; dcp: dcp at 020fc000 { + compatible = "fsl,imx6sl-dcp", "fsl,imx28-dcp"; reg = <0x020fc000 0x4000>; - interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <0 99 IRQ_TYPE_LEVEL_HIGH>, + <0 100 IRQ_TYPE_LEVEL_HIGH>, + <0 101 IRQ_TYPE_LEVEL_HIGH>; + status = "okay";
For devices we want to enable by default, omitting 'status' property will just do the job. Drop the line and applied the patch.
Shawn
Quoted 6 lines
arch/arm/boot/dts/imx6sl.dtsi +0
-0}; };Signature · 1 line
1.9.1