Skip to contentSkip to conversation

atapi: abort transfers with 0 byte limits

PATCH Superseded John Snow 1 participant 2 messages Sep 3, 2015 – Sep 10, 2015

v1 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

John Snow

author
#0 lore raw

PATCH 1/1 atapi: abort transfers with 0 byte limits

We're supposed to abort on transfers like this, unless we fill Word 125 of our IDENTIFY data with a default transfer size, which we don't currently do.

This is an ATA error, not a SCSI/ATAPI one.
See ATA8-ACS3 sections 7.17.6.49 or 7.21.5.

If we don't do this, QEMU will loop forever trying to transfer zero bytes, which isn't particularly useful.

---
 hw/ide/atapi.c    | 32 +++++++++++++++++++++++++++-----
 hw/ide/core.c     |  2 +-
 hw/ide/internal.h |  1 +
 3 files changed, 29 insertions(+), 6 deletions(-)
hw/ide/atapi.c +27 -5
index 79dd167..7a4908f 100644
@@ -1169,20 +1169,28 @@ enum {
      * 4.1.8)
      */
     CHECK_READY = 0x02,
+
+    /*
+     * Commands flagged with NONDATA do not in any circumstances return
+     * any data via ide_atapi_cmd_reply. These commands are exempt from
+     * the normal byte_count_limit constraints.
+     * See ATA8-ACS3 "7.21.5 Byte Count Limit"
+     */
+    NONDATA = 0x04,
 };
 
 static const struct {
     void (*handler)(IDEState *s, uint8_t *buf);
     int flags;
 } atapi_cmd_table[0x100] = {
-    [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY },
+    [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
     [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
     [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
-    [ 0x1b ] = { cmd_start_stop_unit,               0 }, /* [1] */
-    [ 0x1e ] = { cmd_prevent_allow_medium_removal,  0 },
+    [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
+    [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
     [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
     [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
-    [ 0x2b ] = { cmd_seek,                          CHECK_READY },
+    [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
     [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
     [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
     [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
@@ -1190,7 +1198,7 @@ static const struct {
     [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
     [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
     [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
-    [ 0xbb ] = { cmd_set_speed,                     0 },
+    [ 0xbb ] = { cmd_set_speed,                     NONDATA },
     [ 0xbd ] = { cmd_mechanism_status,              0 },
     [ 0xbe ] = { cmd_read_cd,                       CHECK_READY },
     /* [1] handler detects and reports not ready condition itself */
@@ -1251,6 +1259,20 @@ void ide_atapi_cmd(IDEState *s)
         return;
     }
 
+    /* Nondata commands permit the byte_count_limit to be 0.
+     * If this is a data-transferring command and BCL is 0,
+     * we abort at the /ATA/ level, not the ATAPI level.
+     * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
+    if (!(atapi_cmd_table[s->io_buffer[0]].flags & NONDATA)) {
+        /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */
+        uint16_t byte_count_limit = s->lcyl | (s->hcyl << 8);
+        if (!byte_count_limit) {
+            /* TODO: Move abort back into core.c and make static inline again */
+            ide_abort_command(s);
+            return;
+        }
+    }
+
     /* Execute the command */
     if (atapi_cmd_table[s->io_buffer[0]].handler) {
         atapi_cmd_table[s->io_buffer[0]].handler(s, buf);
hw/ide/core.c +1 -1
index 50449ca..28cf535 100644
@@ -457,7 +457,7 @@ BlockAIOCB *ide_issue_trim(BlockBackend *blk,
     return &iocb->common;
 }
 
-static inline void ide_abort_command(IDEState *s)
+void ide_abort_command(IDEState *s)
 {
     ide_transfer_stop(s);
     s->status = READY_STAT | ERR_STAT;
hw/ide/internal.h +1 -0
index 30fdcbc..40e1aa4 100644
@@ -537,6 +537,7 @@ void ide_set_sector(IDEState *s, int64_t sector_num);
 
 void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
 void ide_dma_error(IDEState *s);
+void ide_abort_command(IDEState *s);
 
 void ide_atapi_cmd_ok(IDEState *s);
 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
Signature · 1 line
2.4.3
author NAK
#1 lore raw
Quoted 65 lines · John Snow

We're supposed to abort on transfers like this, unless we fill Word 125 of our IDENTIFY data with a default transfer size, which we don't currently do.

This is an ATA error, not a SCSI/ATAPI one.
See ATA8-ACS3 sections 7.17.6.49 or 7.21.5.

If we don't do this, QEMU will loop forever trying to transfer zero bytes, which isn't particularly useful.

---
 hw/ide/atapi.c    | 32 +++++++++++++++++++++++++++-----
 hw/ide/core.c     |  2 +-
 hw/ide/internal.h |  1 +
 3 files changed, 29 insertions(+), 6 deletions(-)
hw/ide/atapi.c +13 -5
index 79dd167..7a4908f 100644
@@ -1169,20 +1169,28 @@ enum {
      * 4.1.8)
      */
     CHECK_READY = 0x02,
+
+    /*
+     * Commands flagged with NONDATA do not in any circumstances return
+     * any data via ide_atapi_cmd_reply. These commands are exempt from
+     * the normal byte_count_limit constraints.
+     * See ATA8-ACS3 "7.21.5 Byte Count Limit"
+     */
+    NONDATA = 0x04,
 };
 
 static const struct {
     void (*handler)(IDEState *s, uint8_t *buf);
     int flags;
 } atapi_cmd_table[0x100] = {
-    [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY },
+    [ 0x00 ] = { cmd_test_unit_ready,               CHECK_READY | NONDATA },
     [ 0x03 ] = { cmd_request_sense,                 ALLOW_UA },
     [ 0x12 ] = { cmd_inquiry,                       ALLOW_UA },
-    [ 0x1b ] = { cmd_start_stop_unit,               0 }, /* [1] */
-    [ 0x1e ] = { cmd_prevent_allow_medium_removal,  0 },
+    [ 0x1b ] = { cmd_start_stop_unit,               NONDATA }, /* [1] */
+    [ 0x1e ] = { cmd_prevent_allow_medium_removal,  NONDATA },
     [ 0x25 ] = { cmd_read_cdvd_capacity,            CHECK_READY },
     [ 0x28 ] = { cmd_read, /* (10) */               CHECK_READY },
-    [ 0x2b ] = { cmd_seek,                          CHECK_READY },
+    [ 0x2b ] = { cmd_seek,                          CHECK_READY | NONDATA },
     [ 0x43 ] = { cmd_read_toc_pma_atip,             CHECK_READY },
     [ 0x46 ] = { cmd_get_configuration,             ALLOW_UA },
     [ 0x4a ] = { cmd_get_event_status_notification, ALLOW_UA },
@@ -1190,7 +1198,7 @@ static const struct {
     [ 0x5a ] = { cmd_mode_sense, /* (10) */         0 },
     [ 0xa8 ] = { cmd_read, /* (12) */               CHECK_READY },
     [ 0xad ] = { cmd_read_dvd_structure,            CHECK_READY },
-    [ 0xbb ] = { cmd_set_speed,                     0 },
+    [ 0xbb ] = { cmd_set_speed,                     NONDATA },
     [ 0xbd ] = { cmd_mechanism_status,              0 },
     [ 0xbe ] = { cmd_read_cd,                       CHECK_READY },
     /* [1] handler detects and reports not ready condition itself */
@@ -1251,6 +1259,20 @@ void ide_atapi_cmd(IDEState *s)
         return;

hw/ide/atapi.c void ide_atapi_cmd(IDEState *s) · line 1269

Quoted 10 lines
hw/ide/atapi.c +8 -0
     }
 
+    /* Nondata commands permit the byte_count_limit to be 0.
+     * If this is a data-transferring command and BCL is 0,
+     * we abort at the /ATA/ level, not the ATAPI level.
+     * See ATA8 ACS3 section 7.17.6.49 and 7.21.5 */
+    if (!(atapi_cmd_table[s->io_buffer[0]].flags & NONDATA)) {
+        /* TODO: Check IDENTIFY data word 125 for default BCL (currently 0) */
+        uint16_t byte_count_limit = s->lcyl | (s->hcyl << 8);
+        if (!byte_count_limit) {

NACK, this will catch DMA commands too which is not what we want. Spec does allow for BCL to be zero if the transfer mechanism is not PIO.

See V2.

Quoted 35 lines
hw/ide/atapi.c +6 -0
+            /* TODO: Move abort back into core.c and make static inline again */
+            ide_abort_command(s);
+            return;
+        }
+    }
+
     /* Execute the command */
     if (atapi_cmd_table[s->io_buffer[0]].handler) {
         atapi_cmd_table[s->io_buffer[0]].handler(s, buf);
hw/ide/core.c +1 -1
index 50449ca..28cf535 100644
@@ -457,7 +457,7 @@ BlockAIOCB *ide_issue_trim(BlockBackend *blk,
     return &iocb->common;
 }
 
-static inline void ide_abort_command(IDEState *s)
+void ide_abort_command(IDEState *s)
 {
     ide_transfer_stop(s);
     s->status = READY_STAT | ERR_STAT;
hw/ide/internal.h +1 -0
index 30fdcbc..40e1aa4 100644
@@ -537,6 +537,7 @@ void ide_set_sector(IDEState *s, int64_t sector_num);
 
 void ide_start_dma(IDEState *s, BlockCompletionFunc *cb);
 void ide_dma_error(IDEState *s);
+void ide_abort_command(IDEState *s);
 
 void ide_atapi_cmd_ok(IDEState *s);
 void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);