atusb: add handling for different chipnames
Subsystems (3)
Alexander Aring
maintainerPATCH 1/1 atusb: add handling for different chipnames
This patch supports handling for printout different chipnames between atusb and rzusb. The rzusb contains an at86rf230 and atusb an at86rf231 transceiver.
Cc Stefan Schmidt <[email protected]>
Signed-off-by Alexander Aring <[email protected]>
--- drivers/net/ieee802154/atusb.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)
drivers/net/ieee802154/atusb.c +11 -2
@@ -559,6 +559,7 @@ static int atusb_get_and_show_chip(struct atusb *atusb) {struct usb_device *usb_dev = atusb->usb_dev;uint8_t man_id_0, man_id_1, part_num, version_num; +const char *chip; man_id_0 =atusb_read_reg (atusb,RG_MAN_ID_0 ); man_id_1 =atusb_read_reg (atusb,RG_MAN_ID_1 );
@@ -574,14 +575,22 @@ static int atusb_get_and_show_chip(struct atusb *atusb) man_id_1, man_id_0); goto fail; } -if (part_num !=3 && part_num !=2 ) { + +switch (part_num) { +case 2 : + chip ="AT86RF230" ; +break ; +case 3 : + chip ="AT86RF231" ; +break ; +default :dev_err (&usb_dev->dev,"unexpected transceiver, part 0x%02x version 0x%02x\n" , part_num, version_num); goto fail; } -dev_info (&usb_dev->dev,"ATUSB: AT86RF231 version %d\n" , version_num); +dev_info (&usb_dev->dev,"ATUSB: %s version %d\n" , chip, version_num);return 0 ;
Signature · 1 line
2.5.1
Hi Alex,
Quoted 9 lines
This patch supports handling for printout different chipnames between atusb and rzusb. The rzusb contains an at86rf230 and atusb an at86rf231 transceiver.
Cc Stefan Schmidt <[email protected]>Signed-off-by Alexander Aring <[email protected]>---
drivers/net/ieee802154/atusb.c| 13 +++++++++++--1 file changed, 11 insertions(+), 2 deletions(-)
patch has been applied to bluetooth-next tree.
Regards
Marcel