Skip to contentSkip to conversation

scripts/kernel-doc: Kernel-doc improvements

PATCH In review Danilo Cesar Lemes de Paula 5 participants 15 messages Sep 7, 2015 – Oct 1, 2015

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

cover scripts/kernel-doc: Kernel-doc improvements

The following series contains:
* kernel-doc: markdown support and improvements.
* Fixing kernel-doc highlights.
* Improve doc support for functions and structs with same name.
* misc small fixes for drm docbook.

Cc Daniel Vetter <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Johannes Berg <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>

Danilo Cesar Lemes de Paula (6):
scripts/kernel-doc: Replacing highlights hash by an array scripts/kernel-doc: Adding infrastructure for markdown support drm/doc: Convert to markdown
drm/doc: Fixing xml documentation warning scripts/kernel-doc: Improve Markdown results scripts/kernel-doc: Processing -nofunc for functions only

 Documentation/DocBook/Makefile     |  25 +++--
 Documentation/DocBook/drm.tmpl     |  86 ---------------
 drivers/gpu/drm/drm_modes.c        |  12 +--
 drivers/gpu/drm/drm_modeset_lock.c |  14 ++-
 drivers/gpu/drm/drm_prime.c        |  16 ++-
 drivers/gpu/drm/i915/i915_reg.h    |  48 ++++-----
 include/drm/drm_modeset_lock.h     |  10 +-
 include/drm/drm_vma_manager.h      |  10 +-
 scripts/docproc.c                  |  54 +++++++---
 scripts/kernel-doc                 | 216 ++++++++++++++++++++++++++-----------
 10 files changed, 264 insertions(+), 227 deletions(-)
Signature · 6 lines
2.4.3

_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
#1 lore raw

PATCH 1/6 scripts/kernel-doc: Replacing highlights hash by an array

The "highlight" code is very sensible to the order of the hash keys, but the order of the keys cannot be predicted. It generates faulty DocBook entries like:
- @<function>device_for_each_child</function>

Sorting the result is not enough some times (as it's deterministic but we can't control it).
We should use an array for that job, so we can guarantee that the order of the regex execution on dohighlight is correct.

Cc Randy Dunlap <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Stephan Mueller <[email protected]>
Cc Michal Marek <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>
---
 scripts/kernel-doc | 104 ++++++++++++++++++++++++++++++-----------------------
 1 file changed, 60 insertions(+), 44 deletions(-)
scripts/kernel-doc +60 -44
index 9a08fb5..0affe4f 100755
@@ -206,59 +206,73 @@ my $type_env = '(\$\w+)';
 #  One for each output format
 
 # these work fairly well
-my %highlights_html = ( $type_constant, "<i>\$1</i>",
-			$type_func, "<b>\$1</b>",
-			$type_struct_xml, "<i>\$1</i>",
-			$type_env, "<b><i>\$1</i></b>",
-			$type_param, "<tt><b>\$1</b></tt>" );
+my @highlights_html = (
+                       [$type_constant, "<i>\$1</i>"],
+                       [$type_func, "<b>\$1</b>"],
+                       [$type_struct_xml, "<i>\$1</i>"],
+                       [$type_env, "<b><i>\$1</i></b>"],
+                       [$type_param, "<tt><b>\$1</b></tt>"]
+                      );
 my $local_lt = "\\\\\\\\lt:";
 my $local_gt = "\\\\\\\\gt:";
 my $blankline_html = $local_lt . "p" . $local_gt;	# was "<p>"
 
 # html version 5
-my %highlights_html5 = ( $type_constant, "<span class=\"const\">\$1</span>",
-			$type_func, "<span class=\"func\">\$1</span>",
-			$type_struct_xml, "<span class=\"struct\">\$1</span>",
-			$type_env, "<span class=\"env\">\$1</span>",
-			$type_param, "<span class=\"param\">\$1</span>" );
+my @highlights_html5 = (
+                        [$type_constant, "<span class=\"const\">\$1</span>"],
+                        [$type_func, "<span class=\"func\">\$1</span>"],
+                        [$type_struct_xml, "<span class=\"struct\">\$1</span>"],
+                        [$type_env, "<span class=\"env\">\$1</span>"],
+                        [$type_param, "<span class=\"param\">\$1</span>]"]
+		       );
 my $blankline_html5 = $local_lt . "br /" . $local_gt;
 
 # XML, docbook format
-my %highlights_xml = ( "([^=])\\\"([^\\\"<]+)\\\"", "\$1<quote>\$2</quote>",
-			$type_constant, "<constant>\$1</constant>",
-			$type_func, "<function>\$1</function>",
-			$type_struct_xml, "<structname>\$1</structname>",
-			$type_env, "<envar>\$1</envar>",
-			$type_param, "<parameter>\$1</parameter>" );
+my @highlights_xml = (
+                      ["([^=])\\\"([^\\\"<]+)\\\"", "\$1<quote>\$2</quote>"],
+                      [$type_constant, "<constant>\$1</constant>"],
+                      [$type_struct_xml, "<structname>\$1</structname>"],
+                      [$type_param, "<parameter>\$1</parameter>"],
+                      [$type_func, "<function>\$1</function>"],
+                      [$type_env, "<envar>\$1</envar>"]
+		     );
 my $blankline_xml = $local_lt . "/para" . $local_gt . $local_lt . "para" . $local_gt . "\n";
 
 # gnome, docbook format
-my %highlights_gnome = ( $type_constant, "<replaceable class=\"option\">\$1</replaceable>",
-			 $type_func, "<function>\$1</function>",
-			 $type_struct, "<structname>\$1</structname>",
-			 $type_env, "<envar>\$1</envar>",
-			 $type_param, "<parameter>\$1</parameter>" );
+my @highlights_gnome = (
+                        [$type_constant, "<replaceable class=\"option\">\$1</replaceable>"],
+                        [$type_func, "<function>\$1</function>"],
+                        [$type_struct, "<structname>\$1</structname>"],
+                        [$type_env, "<envar>\$1</envar>"],
+                        [$type_param, "<parameter>\$1</parameter>" ]
+		       );
 my $blankline_gnome = "</para><para>\n";
 
 # these are pretty rough
-my %highlights_man = ( $type_constant, "\$1",
-		       $type_func, "\\\\fB\$1\\\\fP",
-		       $type_struct, "\\\\fI\$1\\\\fP",
-		       $type_param, "\\\\fI\$1\\\\fP" );
+my @highlights_man = (
+                      [$type_constant, "\$1"],
+                      [$type_func, "\\\\fB\$1\\\\fP"],
+                      [$type_struct, "\\\\fI\$1\\\\fP"],
+                      [$type_param, "\\\\fI\$1\\\\fP"]
+		     );
 my $blankline_man = "";
 
 # text-mode
-my %highlights_text = ( $type_constant, "\$1",
-			$type_func, "\$1",
-			$type_struct, "\$1",
-			$type_param, "\$1" );
+my @highlights_text = (
+                       [$type_constant, "\$1"],
+                       [$type_func, "\$1"],
+                       [$type_struct, "\$1"],
+                       [$type_param, "\$1"]
+		      );
 my $blankline_text = "";
 
 # list mode
-my %highlights_list = ( $type_constant, "\$1",
-			$type_func, "\$1",
-			$type_struct, "\$1",
-			$type_param, "\$1" );
+my @highlights_list = (
+                       [$type_constant, "\$1"],
+                       [$type_func, "\$1"],
+                       [$type_struct, "\$1"],
+                       [$type_param, "\$1"]
+		      );
 my $blankline_list = "";
 
 # read arguments
@@ -273,7 +287,7 @@ my $verbose = 0;
 my $output_mode = "man";
 my $output_preformatted = 0;
 my $no_doc_sections = 0;
-my %highlights = %highlights_man;
+my @highlights = @highlights_man;
 my $blankline = $blankline_man;
 my $modulename = "Kernel API";
 my $function_only = 0;
@@ -374,31 +388,31 @@ while ($ARGV[0] =~ m/^-(.*)/) {
     my $cmd = shift @ARGV;
     if ($cmd eq "-html") {
 	$output_mode = "html";
-	%highlights = %highlights_html;
+	@highlights = @highlights_html;
 	$blankline = $blankline_html;
     } elsif ($cmd eq "-html5") {
 	$output_mode = "html5";
-	%highlights = %highlights_html5;
+	@highlights = @highlights_html5;
 	$blankline = $blankline_html5;
     } elsif ($cmd eq "-man") {
 	$output_mode = "man";
-	%highlights = %highlights_man;
+	@highlights = @highlights_man;
 	$blankline = $blankline_man;
     } elsif ($cmd eq "-text") {
 	$output_mode = "text";
-	%highlights = %highlights_text;
+	@highlights = @highlights_text;
 	$blankline = $blankline_text;
     } elsif ($cmd eq "-docbook") {
 	$output_mode = "xml";
-	%highlights = %highlights_xml;
+	@highlights = @highlights_xml;
 	$blankline = $blankline_xml;
     } elsif ($cmd eq "-list") {
 	$output_mode = "list";
-	%highlights = %highlights_list;
+	@highlights = @highlights_list;
 	$blankline = $blankline_list;
     } elsif ($cmd eq "-gnome") {
 	$output_mode = "gnome";
-	%highlights = %highlights_gnome;
+	@highlights = @highlights_gnome;
 	$blankline = $blankline_gnome;
     } elsif ($cmd eq "-module") { # not needed for XML, inherits from calling document
 	$modulename = shift @ARGV;
@@ -2671,9 +2685,11 @@ $kernelversion = get_kernel_version();
 
 # generate a sequence of code that will splice in highlighting information
 # using the s// operator.
-foreach my $pattern (sort keys %highlights) {
-#   print STDERR "scanning pattern:$pattern, highlight:($highlights{$pattern})\n";
-    $dohighlight .=  "\$contents =~ s:$pattern:$highlights{$pattern}:gs;\n";
+foreach my $k (keys @highlights) {
+    my $pattern = $highlights[$k][0];
+    my $result = $highlights[$k][1];
+#   print STDERR "scanning pattern:$pattern, highlight:($result)\n";
+    $dohighlight .=  "\$contents =~ s:$pattern:$result:gs;\n";
 }
 
 # Read the file that maps relative names to absolute names for
Signature · 1 line
2.4.3
maintainer
#2 lore raw

Re: [PATCH 1/6] scripts/kernel-doc: Replacing highlights hash by an array

Quoted 9 lines · On Mon, 7 Sep 2015 17:01:59 -0300 Danilo Cesar Lemes de Paula…

The "highlight" code is very sensible to the order of the hash keys, but the order of the keys cannot be predicted. It generates faulty DocBook entries like:
- @<function>device_for_each_child</function>

Sorting the result is not enough some times (as it's deterministic but we can't control it).
We should use an array for that job, so we can guarantee that the order of the regex execution on dohighlight is correct.

OK, I've spent a bunch of time with this, comparing the results before and after. The output you mention is clearly wrong, but there might be room to differ over what the root cause is.

That output is caused by @device_for_each_child() in the comments. This happens for a few other functions as well, and I think it's wrong. @ is used to indicate parameters (or structure fields); I'm not sure why people are using it for functions that are *not* one of the above. Formatting the function names as a parameter doesn't seem right either.

There is the occasional case where the parameter *is* a function and the text uses the () notation (threadfn(), for example). Having the "parameter" style win out over the "function" style in such cases is OK, I guess, but it would be good to format the parentheses along with the name. The function patterns there now drop the parentheses entirely, which seems a bit strange to me.

I guess I'll apply the patch; determinism is good, and it doesn't make anything screwy that wasn't already that way. But I think we should fix the misapplied @s and sort out function formatting in general. One of these days...

Thanks,

jon
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

#3 lore raw

Re: [PATCH 1/6] scripts/kernel-doc: Replacing highlights hash by an array

Hi,

Quoted 15 lines · Jonathan Corbet
Quoted 9 lines · On Mon, 7 Sep 2015 17:01:59 -0300 Danilo Cesar Lemes de Paula…

The "highlight" code is very sensible to the order of the hash keys, but the order of the keys cannot be predicted. It generates faulty DocBook entries like:
- @<function>device_for_each_child</function>

Sorting the result is not enough some times (as it's deterministic but we can't control it).
We should use an array for that job, so we can guarantee that the order of the regex execution on dohighlight is correct.

OK, I've spent a bunch of time with this, comparing the results before and after. The output you mention is clearly wrong, but there might be room to differ over what the root cause is.

Quoted 5 lines

That output is caused by @device_for_each_child() in the comments. This happens for a few other functions as well, and I think it's wrong. @ is used to indicate parameters (or structure fields); I'm not sure why people are using it for functions that are *not* one of the above. Formatting the function names as a parameter doesn't seem right either.

Shouldn't kernel-doc print a warning for syntactic mistakes like this rather than silently accomodating to it in whatever way?

As to the usage of markdown in general, there's documentation coming up for vga_switcheroo which makes use of that so I'd love to see it merged:
https://github.com/l1k/linux/commit/d1476d748b5f1adf5bffe8e0a8bafad1e879d22f
https://github.com/l1k/linux/commit/11c55ae65788162970d8fa23cd1fd2518af55d34

The large set of dependencies pulled in on Fedora is likely to be blamed on the RedHat packaging being notoriously coarse-grained. By comparison, Debian is extremely fine-grained, kind of the opposite extreme, and therefore has comparatively few prerequisites:
https://packages.debian.org/jessie/pandoc

I do agree however that alternative tools with fewer dependencies should be supported and it would be great if the markdown patches were amended to that end.

Best regards,

Lukas
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel

#4 lore raw

PATCH 2/6 scripts/kernel-doc: Adding infrastructure for markdown support

In reply to Danilo Cesar Lemes de Paula

Markdown support is given by calling an external tool, pandoc, for all highlighted text on kernel-doc.

Pandoc converts Markdown text to proper Docbook tags, which will be later translated to pdf, html or other targets.

This adds the capability of adding human-readle text highlight (bold, underline, etc), bullet and numbered lists, simple tables, fixed-width text (including asciiart), requiring minimal changes to current documentation.

At this moment, pandoc is totally optional. Docbooks ready for markdown should be added to the MARKDOWNREADY variable inside the Makefile. In case the developer doesn't have pandoc installed, Make will throw a warning and the documentation build will continue, generating simple Documentation without the features brought by pandoc.

Cc Randy Dunlap <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Stephan Mueller <[email protected]>
Cc Michal Marek <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>
---
 Documentation/DocBook/Makefile | 25 +++++++++++-----
 scripts/docproc.c              | 54 ++++++++++++++++++++++++----------
 scripts/kernel-doc             | 66 ++++++++++++++++++++++++++++++++++++++++--
 3 files changed, 119 insertions(+), 26 deletions(-)
Documentation/DocBook/Makefile +18 -7
index 93eff64..c1ff834 100644
@@ -17,6 +17,8 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
 	    tracepoint.xml drm.xml media_api.xml w1.xml \
 	    writing_musb_glue_layer.xml crypto-API.xml iio.xml
 
+MARKDOWNREADY := 
+
 include Documentation/DocBook/media/Makefile
 
 ###
@@ -81,18 +83,23 @@ XMLTOFLAGS += --skip-validation
 # The following rules are used to generate the .xml documentation
 # required to generate the final targets. (ps, pdf, html).
 quiet_cmd_docproc = DOCPROC $@
-      cmd_docproc = SRCTREE=$(srctree)/ $(DOCPROC) doc $< >$@
+      cmd_docproc = SRCTREE=$(srctree)/ $(DOCPROC) doc $<
 define rule_docproc
-	set -e;								\
-        $(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))';) 	\
-        $(cmd_$(1)); 							\
-        ( 								\
-          echo 'cmd_$@ := $(cmd_$(1))'; 				\
-          echo $@: `SRCTREE=$(srctree) $(DOCPROC) depend $<`; 		\
+	set -e;									\
+	USEMARKDOWN="";								\
+	FILE=`basename $@`;							\
+	[[ "$(MARKDOWNREADY)" =~ "$${FILE}" ]] && USEMARKDOWN="-use-markdown";	\
+        $(if $($(quiet)cmd_$(1)),echo '  $($(quiet)cmd_$(1))';) 		\
+        $(cmd_$(1)) $$USEMARKDOWN >$@;						\
+        ( 									\
+          echo 'cmd_$@ := $(cmd_$(1))';				 		\
+          echo $@: `SRCTREE=$(srctree) $(DOCPROC) depend $<`;			\
         ) > $(dir $@).$(notdir $@).cmd
 endef
 
 %.xml: %.tmpl $(KERNELDOC) $(DOCPROC) $(KERNELDOCXMLREF) FORCE
+	@(which pandoc > /dev/null 2>&1) || \
+	(echo "*** To get propper documentation you need to install pandoc ***";)
 	$(call if_changed_rule,docproc)
 
 # Tell kbuild to always build the programs
@@ -103,6 +110,10 @@ notfoundtemplate = echo "*** You have to install docbook-utils or xmlto ***"; \
 db2xtemplate = db2TYPE -o $(dir $@) $<
 xmltotemplate = xmlto TYPE $(XMLTOFLAGS) -o $(dir $@) $<
 
+ifneq ($(shell which pandoc >/dev/null 2>&1 && echo found),found)
+	MARKDOWNREADY := "";
+endif
+
 # determine which methods are available
 ifeq ($(shell which db2ps >/dev/null 2>&1 && echo found),found)
 	use-db2x = db2x
scripts/docproc.c +38 -16

129 lines not on this page · raw message

scripts/kernel-doc +63 -3

125 lines not on this page · raw message

Signature · 6 lines
2.4.3

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
maintainer
#5 lore raw

Re: [PATCH 2/6] scripts/kernel-doc: Adding infrastructure for markdown support

Documentation/DocBook/Makefile XMLTOFLAGS += --skip-validation · line 102

Quoted 3 lines · Danilo Cesar Lemes de Paula

%.xml: %.tmpl $(KERNELDOC) $(DOCPROC) $(KERNELDOCXMLREF) FORCE

Documentation/DocBook/Makefile +2 -0
+	@(which pandoc > /dev/null 2>&1) || \
+	(echo "*** To get propper documentation you need to install pandoc ***";)

s/propper/proper/

This only seems to be applied to our (drm-intel) topical branch, otherwise would've sent a patch.

BR,
Jani.

Signature · 1 line
Jani Nikula, Intel Open Source Technology Center
#6 lore raw

PATCH 3/6 drm/doc: Convert to markdown

In reply to Danilo Cesar Lemes de Paula

DRM Docbook is now Markdown ready. This means its doc is able to use markdown text on it.

* Documentation/DocBook/drm.tmpl: Contains a table duplicated from drivers/gpu/drm/i915/i915_reg.h. This is not needed anymore

* drivers/gpu/drm/drm_modeset_lock.c: had a code example that used to look pretty bad on html. Fixed by using proper code markup.

* drivers/gpu/drm/drm_prime.c: Remove spaces between lines to make a proper markup list.

* drivers/gpu/drm/i915/i915_reg.h: Altought pandoc supports tables, it doesn't support table cell spanning. But we can use fixed-width for those special cases.

* include/drm/drm_vma_manager.h: Another code example that should be proper indented with four spaces.

Cc Randy Dunlap <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Stephan Mueller <[email protected]>
Cc Michal Marek <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>
---
 Documentation/DocBook/Makefile     |  2 +-
 Documentation/DocBook/drm.tmpl     | 86 --------------------------------------
 drivers/gpu/drm/drm_modes.c        | 12 +++---
 drivers/gpu/drm/drm_modeset_lock.c | 14 +++----
 drivers/gpu/drm/drm_prime.c        | 16 +++----
 drivers/gpu/drm/i915/i915_reg.h    | 48 ++++++++++-----------
 include/drm/drm_vma_manager.h      | 10 ++---
 7 files changed, 48 insertions(+), 140 deletions(-)
Documentation/DocBook/Makefile +1 -1
index c1ff834..75b7d9b 100644
@@ -17,7 +17,7 @@ DOCBOOKS := z8530book.xml device-drivers.xml \
 	    tracepoint.xml drm.xml media_api.xml w1.xml \
 	    writing_musb_glue_layer.xml crypto-API.xml iio.xml
 
-MARKDOWNREADY := 
+MARKDOWNREADY := drm.xml
 
 include Documentation/DocBook/media/Makefile
 
Documentation/DocBook/drm.tmpl +0 -86

92 lines not on this page · raw message

drivers/gpu/drm/drm_modes.c +6 -6
index cd74a09..9480464 100644
@@ -553,10 +553,10 @@ EXPORT_SYMBOL(drm_gtf_mode_complex);
  * drivers/video/fbmon.c
  *
  * Standard GTF parameters:
- * M = 600
- * C = 40
- * K = 128
- * J = 20
+ *     M = 600
+ *     C = 40
+ *     K = 128
+ *     J = 20
  *
  * Returns:
  * The modeline based on the GTF algorithm stored in a drm_display_mode object.
@@ -1212,7 +1212,7 @@ EXPORT_SYMBOL(drm_mode_connector_list_update);
  * This uses the same parameters as the fb modedb.c, except for an extra
  * force-enable, force-enable-digital and force-disable bit at the end:
  *
- *	<xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
+ * <xres>x<yres>[M][R][-<bpp>][@<refresh>][i][m][eDd]
  *
  * The intermediate drm_cmdline_mode structure is required to store additional
  * options from the command line modline like the force-enable/disable flag.
@@ -1491,4 +1491,4 @@ int drm_mode_convert_umode(struct drm_display_mode *out,
 
 out:
 	return ret;
-}
\ No newline at end of file
+}
drivers/gpu/drm/drm_modeset_lock.c +6 -8
index fba321c..9abee87 100644
@@ -40,17 +40,15 @@
  * The basic usage pattern is to:
  *
  *     drm_modeset_acquire_init(&ctx)
- *   retry:
+ *     retry:
  *     foreach (lock in random_ordered_set_of_locks) {
- *       ret = drm_modeset_lock(lock, &ctx)
- *       if (ret == -EDEADLK) {
- *          drm_modeset_backoff(&ctx);
- *          goto retry;
- *       }
+ *         ret = drm_modeset_lock(lock, &ctx)
+ *         if (ret == -EDEADLK) {
+ *             drm_modeset_backoff(&ctx);
+ *             goto retry;
+ *         }
  *     }
- *
  *     ... do stuff ...
- *
  *     drm_modeset_drop_locks(&ctx);
  *     drm_modeset_acquire_fini(&ctx);
  */
drivers/gpu/drm/drm_prime.c +6 -10
index 9f935f5..27aa718 100644
@@ -313,19 +313,15 @@ static const struct dma_buf_ops drm_gem_prime_dmabuf_ops =  {
  *
  * Export callbacks:
  *
- *  - @gem_prime_pin (optional): prepare a GEM object for exporting
- *
- *  - @gem_prime_get_sg_table: provide a scatter/gather table of pinned pages
- *
- *  - @gem_prime_vmap: vmap a buffer exported by your driver
- *
- *  - @gem_prime_vunmap: vunmap a buffer exported by your driver
- *
- *  - @gem_prime_mmap (optional): mmap a buffer exported by your driver
+ *  * @gem_prime_pin (optional): prepare a GEM object for exporting
+ *  * @gem_prime_get_sg_table: provide a scatter/gather table of pinned pages
+ *  * @gem_prime_vmap: vmap a buffer exported by your driver
+ *  * @gem_prime_vunmap: vunmap a buffer exported by your driver
+ *  * @gem_prime_mmap (optional): mmap a buffer exported by your driver
  *
  * Import callback:
  *
- *  - @gem_prime_import_sg_table (import): produce a GEM object from another
+ *  * @gem_prime_import_sg_table (import): produce a GEM object from another
  *    driver's scatter/gather table
  */
 
drivers/gpu/drm/i915/i915_reg.h +24 -24

55 lines not on this page · raw message

include/drm/drm_vma_manager.h +5 -5
index 8cd402c..2ca44db 100644
@@ -110,11 +110,11 @@ drm_vma_offset_exact_lookup(struct drm_vma_offset_manager *mgr,
  * Note: You're in atomic-context while holding this lock!
  *
  * Example:
- *   drm_vma_offset_lock_lookup(mgr);
- *   node = drm_vma_offset_lookup_locked(mgr);
- *   if (node)
- *       kref_get_unless_zero(container_of(node, sth, entr));
- *   drm_vma_offset_unlock_lookup(mgr);
+ *     drm_vma_offset_lock_lookup(mgr);
+ *     node = drm_vma_offset_lookup_locked(mgr);
+ *     if (node)
+ *         kref_get_unless_zero(container_of(node, sth, entr));
+ *     drm_vma_offset_unlock_lookup(mgr);
  */
 static inline void drm_vma_offset_lock_lookup(struct drm_vma_offset_manager *mgr)
 {
Signature · 6 lines
2.4.3

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#7 lore raw

PATCH 4/6 drm/doc: Fixing xml documentation warning

In reply to Danilo Cesar Lemes de Paula

"/**" should be used for kernel-doc documentation only. It causes a warning with the new "in struct body" format.

Cc Randy Dunlap <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Stephan Mueller <[email protected]>
Cc Michal Marek <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>
Cc Graham Whaley <[email protected]>
---
 include/drm/drm_modeset_lock.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
include/drm/drm_modeset_lock.h +5 -5
index 5dd18bf..94938d8 100644
@@ -43,19 +43,19 @@ struct drm_modeset_acquire_ctx {
 
 	struct ww_acquire_ctx ww_ctx;
 
-	/**
+	/*
 	 * Contended lock: if a lock is contended you should only call
 	 * drm_modeset_backoff() which drops locks and slow-locks the
 	 * contended lock.
 	 */
 	struct drm_modeset_lock *contended;
 
-	/**
+	/*
 	 * list of held locks (drm_modeset_lock)
 	 */
 	struct list_head locked;
 
-	/**
+	/*
 	 * Trylock mode, use only for panic handlers!
 	 */
 	bool trylock_only;
@@ -70,12 +70,12 @@ struct drm_modeset_acquire_ctx {
  * Used for locking CRTCs and other modeset resources.
  */
 struct drm_modeset_lock {
-	/**
+	/*
 	 * modeset lock
 	 */
 	struct ww_mutex mutex;
 
-	/**
+	/*
 	 * Resources that are locked as part of an atomic update are added
 	 * to a list (so we know what to unlock at the end).
 	 */
Signature · 1 line
2.4.3
#8 lore raw

PATCH 5/6 scripts/kernel-doc: Improve Markdown results

In reply to Danilo Cesar Lemes de Paula

Using pandoc as the Markdown engine cause some minor side effects as pandoc includes main <para> tags for almost everything. Original Markdown support approach removes those main tags, but it caused some inconsistencies when that tag is not the main one, like:
<something>..</something>
<para>...</para>

As kernel-doc was already including a <para> tag, it causes the presence of double <para> tags (<para><para>), which is not supported by DocBook spec.

Html target gets away with it, so it causes no harm, although other targets might not be so lucky (pdf as example).

We're now delegating the inclusion of the main <para> tag to pandoc only, as it knows when it's necessary or not.

That behavior causes a corner case, the only situation where we're certainly that <para> is not needed, which is the <refpurpose> content. For those cases, we're using a $output_markdown_nopara = 1 control var.

Cc Randy Dunlap <[email protected]>
Cc Daniel Vetter <[email protected]>
Cc Laurent Pinchart <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Herbert Xu <[email protected]>
Cc Stephan Mueller <[email protected]>
Cc Michal Marek <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>
Cc Graham Whaley <[email protected]>
---
 scripts/kernel-doc | 48 ++++++++++++++++++++++++++++++++++--------------
 1 file changed, 34 insertions(+), 14 deletions(-)
scripts/kernel-doc +34 -14
index 5fe572a..d6129e7 100755
@@ -288,6 +288,7 @@ my $use_markdown = 0;
 my $verbose = 0;
 my $output_mode = "man";
 my $output_preformatted = 0;
+my $output_markdown_nopara = 0;
 my $no_doc_sections = 0;
 my @highlights = @highlights_man;
 my $blankline = $blankline_man;
@@ -538,8 +539,11 @@ sub markdown_to_docbook {
 	close(CHLD_OUT);
 	close(CHLD_ERR);
 
-	# pandoc insists in adding Main <para></para>, we should remove them.
-	$content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
+	if ($output_markdown_nopara) {
+		# pandoc insists in adding Main <para></para>, sometimes we
+		# want to remove them.
+		$content =~ s:\A\s*<para>\s*\n(.*)\n</para>\Z$:$1:egsm;
+	}
 
 	return $content;
 }
@@ -614,7 +618,7 @@ sub output_highlight {
 	    $line =~ s/^\s*//;
 	}
 	if ($line eq ""){
-	    if (! $output_preformatted) {
+	    if (! $output_preformatted && ! $use_markdown) {
 		print $lineprefix, local_unescape($blankline);
 	    }
 	} else {
@@ -1035,7 +1039,7 @@ sub output_section_xml(%) {
 	    # programlisting is already included by pandoc
 	    print "<programlisting>\n" unless $use_markdown;
 	    $output_preformatted = 1;
-	} else {
+	} elsif (! $use_markdown) {
 	    print "<para>\n";
 	}
 	output_highlight($args{'sections'}{$section});
@@ -1043,7 +1047,7 @@ sub output_section_xml(%) {
 	if ($section =~ m/EXAMPLE/i) {
 	    print "</programlisting>\n" unless $use_markdown;
 	    print "</informalexample>\n";
-	} else {
+	} elsif (! $use_markdown) {
 	    print "</para>\n";
 	}
 	print "</refsect1>\n";
@@ -1075,7 +1079,9 @@ sub output_function_xml(%) {
     print " <refname>" . $args{'function'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
+    $output_markdown_nopara = 1;
     output_highlight ($args{'purpose'});
+    $output_markdown_nopara = 0;
     print " </refpurpose>\n";
     print "</refnamediv>\n";
 
@@ -1113,10 +1119,12 @@ sub output_function_xml(%) {
 	    $parameter_name =~ s/\[.*//;
 
 	    print "  <varlistentry>\n   <term><parameter>$parameter</parameter></term>\n";
-	    print "   <listitem>\n    <para>\n";
+	    print "   <listitem>\n";
+	    print "    <para>\n" unless $use_markdown;
 	    $lineprefix="     ";
 	    output_highlight($args{'parameterdescs'}{$parameter_name});
-	    print "    </para>\n   </listitem>\n  </varlistentry>\n";
+	    print "    </para>\n" unless $use_markdown;
+	    print "   </listitem>\n  </varlistentry>\n";
 	}
 	print " </variablelist>\n";
     } else {
@@ -1152,7 +1160,9 @@ sub output_struct_xml(%) {
     print " <refname>" . $args{'type'} . " " . $args{'struct'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
+    $output_markdown_nopara = 1;
     output_highlight ($args{'purpose'});
+    $output_markdown_nopara = 0;
     print " </refpurpose>\n";
     print "</refnamediv>\n";
 
@@ -1205,9 +1215,11 @@ sub output_struct_xml(%) {
       ($args{'parameterdescs'}{$parameter_name} ne $undescribed) || next;
       print "    <varlistentry>";
       print "      <term>$parameter</term>\n";
-      print "      <listitem><para>\n";
+      print "      <listitem>\n";
+      print "         <para>\n" unless $use_markdown;
       output_highlight($args{'parameterdescs'}{$parameter_name});
-      print "      </para></listitem>\n";
+      print "         </para>\n" unless $use_markdown;
+      print "      </listitem>\n";
       print "    </varlistentry>\n";
     }
     print "  </variablelist>\n";
@@ -1246,7 +1258,9 @@ sub output_enum_xml(%) {
     print " <refname>enum " . $args{'enum'} . "</refname>\n";
     print " <refpurpose>\n";
     print "  ";
+    $output_markdown_nopara = 1;
     output_highlight ($args{'purpose'});
+    $output_markdown_nopara = 0;
     print " </refpurpose>\n";
     print "</refnamediv>\n";
 
@@ -1276,9 +1290,11 @@ sub output_enum_xml(%) {
 
       print "    <varlistentry>";
       print "      <term>$parameter</term>\n";
-      print "      <listitem><para>\n";
+      print "      <listitem>\n";
+      print "         <para>\n" unless $use_markdown;
       output_highlight($args{'parameterdescs'}{$parameter_name});
-      print "      </para></listitem>\n";
+      print "         </para>\n" unless $use_markdown;
+      print "      </listitem>\n";
       print "    </varlistentry>\n";
     }
     print "  </variablelist>\n";
@@ -1344,14 +1360,14 @@ sub output_blockhead_xml(%) {
 	if ($section =~ m/EXAMPLE/i) {
 	    print "<example><para>\n";
 	    $output_preformatted = 1;
-	} else {
+	} elsif (! $use_markdown) {
 	    print "<para>\n";
 	}
 	output_highlight($args{'sections'}{$section});
 	$output_preformatted = 0;
 	if ($section =~ m/EXAMPLE/i) {
 	    print "</para></example>\n";
-	} else {
+	} elsif (! $use_markdown) {
 	    print "</para>";
 	}
 	if (!$args{'content-only'}) {
@@ -2695,7 +2711,11 @@ sub process_file($) {
 		{
 			if ( $1 eq "" )
 			{
-				$contents .= $blankline;
+				if ($use_markdown) {
+					$contents .= "\n";
+				} else {
+					$contents .= $blankline;
+				}
 			}
 			else
 			{
Signature · 6 lines
2.4.3

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#9 lore raw

PATCH 6/6 scripts/kernel-doc: Processing -nofunc for functions only

In reply to Danilo Cesar Lemes de Paula

Docproc process EXPORT_SYMBOL(f1) macro and uses -nofunc f1 to avoid duplicated documentation in the next call.
It works for most of the cases, but there are some specific situations where a struct has the same name of an already-exported function.

Current kernel-doc behavior ignores those structs and do not add them to the final documentation. This patch fixes it.

This is non-usual and the only case I've found is the drm_modeset_lock (function and struct) defined in drm_modeset_lock.h and drm_modeset_lock.c. Considering this, it should only affect the DRM documentation by including struct drm_modeset_lock to the final Docbook.

Cc Daniel Vetter <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Johannes Berg <[email protected]>
Cc intel-gfx <[email protected]>
Cc dri-devel <[email protected]>
---
 scripts/kernel-doc | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
scripts/kernel-doc +1 -1
index d6129e7..a01b20ea 100755
@@ -1836,7 +1836,7 @@ sub output_declaration {
     my $func = "output_${functype}_$output_mode";
     if (($function_only==0) ||
 	( $function_only == 1 && defined($function_table{$name})) ||
-	( $function_only == 2 && !defined($function_table{$name})))
+	( $function_only == 2 && !($functype eq "function" && defined($function_table{$name}))))
     {
 	&$func(@_);
 	$section_counter++;
Signature · 6 lines
2.4.3

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
maintainer
#10 lore raw
In reply to Danilo Cesar Lemes de Paula
Quoted 2 lines · On Mon, 7 Sep 2015 17:01:58 -0300 Danilo Cesar Lemes de Paula…

The following series contains:
* kernel-doc: markdown support and improvements.

OK, I've spent a while looking this stuff over. I like the general idea, but I do have a couple of concerns.

1 Installing pandoc on a Fedora system wants to drag in 70(!) packages
for 100MB of total stuff. Installing it on Arch is ... well ... enough to make you want to switch to Fedora. If we add a dependency on a tool this massive, people are going to complain, loudly.

Have you looked at using something like cmark instead? I don't know the tool well, but it seems like it can do the job simply enough. It's focused, written in C, and doesn't drag in a diskful of Haskell stuff. There's lot of other converters out there too, I'm not tied to this one (though I think CommonMark deserves support), but I do think this question needs to be considered.

2 We're constructing an increasingly complicated document-processing
mechanism with a lot of independently moving parts. What if we converted the whole document to markdown and dispensed with the XML part altogether? Making the source files simpler and dispensing with the xmlto requirement would be a big win, IMO.

I will not make #2 be a precondition to getting some form of this work merged, but I would like to have a good answer for #1. Adding such a heavyweight dependency (even as an optional one) needs to have a pretty good story behind it.

Thanks,

jon

#11 lore raw
Quoted 14 lines · Jonathan Corbet
Quoted 2 lines · On Mon, 7 Sep 2015 17:01:58 -0300 Danilo Cesar Lemes de Paula…

The following series contains:
* kernel-doc: markdown support and improvements.

OK, I've spent a while looking this stuff over. I like the general idea, but I do have a couple of concerns.

1 Installing pandoc on a Fedora system wants to drag in 70(!) packages
for 100MB of total stuff. Installing it on Arch is ... well ... enough to make you want to switch to Fedora. If we add a dependency on a tool this massive, people are going to complain, loudly.

Quoted 6 lines

Have you looked at using something like cmark instead? I don't know the tool well, but it seems like it can do the job simply enough. It's focused, written in C, and doesn't drag in a diskful of Haskell stuff. There's lot of other converters out there too, I'm not tied to this one (though I think CommonMark deserves support), but I do think this question needs to be considered.

Personally I don't care which kind of text markup we pick and wich converter, as long as the project looks reasonable far away from immeninent death (way too many one-person projects on github in this area).

But if we have this discussion I'd like to decouple it from the other kerneldoc improvemnts in this series (patches 1, 5 and 6). If we cant agree on the text markup then drm docs will simply look a bit funny for everyone else. But if the inline struct stuff won't happen 0-day will scream around (and there's already patches which use the new layout).

Quoted 5 lines

2 We're constructing an increasingly complicated document-processing
mechanism with a lot of independently moving parts. What if we converted the whole document to markdown and dispensed with the XML part altogether? Making the source files simpler and dispensing with the xmlto requirement would be a big win, IMO.

Who's going to convert the almost 30kloc of xml template (which often have large amounts of texts) and the over 60k kerneldoc comments that we have already?

Quoted 4 lines

I will not make #2 be a precondition to getting some form of this work merged, but I would like to have a good answer for #1. Adding such a heavyweight dependency (even as an optional one) needs to have a pretty good story behind it.

Should we discuss #1 at ks? Imo as long as no one pipes up to do the massive conversion away from the current toolchain (and subsystem maintainers won't just kill that effort because it causes too much churn) moving forward with the kerneldoc toolchain we have makes sense. Hence I'd like to see those patches landed before we resolve #1 if possible.

Thanks, Daniel

Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
maintainer
#12 lore raw
Quoted 10 lines · On Sun, 13 Sep 2015 12:36:07 +0200 Daniel Vetter <[email protected]> wrote:

Personally I don't care which kind of text markup we pick and wich converter, as long as the project looks reasonable far away from immeninent death (way too many one-person projects on github in this area).

But if we have this discussion I'd like to decouple it from the other kerneldoc improvemnts in this series (patches 1, 5 and 6). If we cant agree on the text markup then drm docs will simply look a bit funny for everyone else. But if the inline struct stuff won't happen 0-day will scream around (and there's already patches which use the new layout).

Those patches are:

1)  scripts/kernel-doc: Replacing highlights hash by an array
5)  scripts/kernel-doc: Improve Markdown results
6)  scripts/kernel-doc: Processing -nofunc for functions only

#1 is fine, I'll merge that today. #6 is already merged. #5 is a markdown patch, though, and doesn't make sense without the others? Are you thinking about #3 (drm/doc: Convert to markdown)? That one would almost work (it depends on #2 currently) and it nicely shows *why* I'd like to get away from XML...

Quoted 9 lines
Quoted 5 lines

2 We're constructing an increasingly complicated document-processing
mechanism with a lot of independently moving parts. What if we converted the whole document to markdown and dispensed with the XML part altogether? Making the source files simpler and dispensing with the xmlto requirement would be a big win, IMO.

Who's going to convert the almost 30kloc of xml template (which often have large amounts of texts) and the over 60k kerneldoc comments that we have already?

I thought you'd do that :)

Seriously, though, a change would be a big job. There's a reason I've said several times that it would make no sense to delay the work at hand in the hopes of somebody doing this whole job instead. But we can certainly ponder what might be better.

Getting rid of the XML stuff may well simplify the whole process and make the documentation much more accessible for those who would change it; that could be a goal worth going for. Oh, and anything requiring changes to the kerneldoc comments is going nowhere, that was never something I'd contemplated. Those comments are fine.

But any such change needs a lot of thought and a reasonable proof of concept. Meanwhile we have work that can make the docs better now, and I want to merge it. But we should choose the tools we use carefully, and I anticipate a lot of opposition to one that has to drag in 70 Haskell packages with it.

Quoted 10 lines
Quoted 4 lines

I will not make #2 be a precondition to getting some form of this work merged, but I would like to have a good answer for #1. Adding such a heavyweight dependency (even as an optional one) needs to have a pretty good story behind it.

Should we discuss #1 at ks? Imo as long as no one pipes up to do the massive conversion away from the current toolchain (and subsystem maintainers won't just kill that effort because it causes too much churn) moving forward with the kerneldoc toolchain we have makes sense. Hence I'd like to see those patches landed before we resolve #1 if possible.

I've tossed the topic out there; the kernel summit agenda hasn't been made yet, though. In any case, I'd be happy to resolve this particular issue before then if it were possible.

jon

#13 lore raw
Quoted 20 lines · Jonathan Corbet
Quoted 10 lines · On Sun, 13 Sep 2015 12:36:07 +0200 Daniel Vetter <[email protected]> wrote:

Personally I don't care which kind of text markup we pick and wich converter, as long as the project looks reasonable far away from immeninent death (way too many one-person projects on github in this area).

But if we have this discussion I'd like to decouple it from the other kerneldoc improvemnts in this series (patches 1, 5 and 6). If we cant agree on the text markup then drm docs will simply look a bit funny for everyone else. But if the inline struct stuff won't happen 0-day will scream around (and there's already patches which use the new layout).

Those patches are:

1)  scripts/kernel-doc: Replacing highlights hash by an array
5)  scripts/kernel-doc: Improve Markdown results
6)  scripts/kernel-doc: Processing -nofunc for functions only
Quoted 5 lines

#1 is fine, I'll merge that today. #6 is already merged. #5 is a markdown patch, though, and doesn't make sense without the others? Are you thinking about #3 (drm/doc: Convert to markdown)? That one would almost work (it depends on #2 currently) and it nicely shows *why* I'd like to get away from XML...

Sorry I mixed things up, #5 is ok to leave out. I thought about "scripts/kernel-doc Allow struct arguments documentation in struct body" but you already merged that one for 4.2. Which I missed, but which is great since that's the one that would cause the big conflicts.

Quoted 17 lines
Quoted 9 lines
Quoted 5 lines

2 We're constructing an increasingly complicated document-processing
mechanism with a lot of independently moving parts. What if we converted the whole document to markdown and dispensed with the XML part altogether? Making the source files simpler and dispensing with the xmlto requirement would be a big win, IMO.

Who's going to convert the almost 30kloc of xml template (which often have large amounts of texts) and the over 60k kerneldoc comments that we have already?

I thought you'd do that :)

Seriously, though, a change would be a big job. There's a reason I've said several times that it would make no sense to delay the work at hand in the hopes of somebody doing this whole job instead. But we can certainly ponder what might be better.

Quoted 5 lines

Getting rid of the XML stuff may well simplify the whole process and make the documentation much more accessible for those who would change it; that could be a goal worth going for. Oh, and anything requiring changes to the kerneldoc comments is going nowhere, that was never something I'd contemplated. Those comments are fine.

Well my goal is to be able to have all the programmer docs in the code, including any high-level overview sections to tie everything together (hence hyperlinks and better formatting). But then you still need some skeleton to make a coherent whole out of all the parts, and I think the docbook xml templates we have serve rather fine for that role. Writing text in xml is indeed horrid, but if we can create in-line DOC: sections with decent formatting there's really no need for that. From that angle this work here already has the goal to get rid of the xml - I plane to move all the existing text in the drm.tmpl xml into inline DOC: kerneldoc commets.

And at least gtkdoc (which we use extensively for the userpace test/tools repo) relies on some xml thing to tie different topics together too. So that seems pretty standard.

Quoted 5 lines

But any such change needs a lot of thought and a reasonable proof of concept. Meanwhile we have work that can make the docs better now, and I want to merge it. But we should choose the tools we use carefully, and I anticipate a lot of opposition to one that has to drag in 70 Haskell packages with it.

Well personally I don't care about the exact tooling, as long as:
- it's a reasonable alive project
- packages available on distros (works for me on both debian and fedora)
- we can muck around with how things are integrated into overall docs (which is the case since pandoc is only used as a paragraph formatter here).

The last one is something we stumbled over for the userspace side where we wanted to have better tooling for documenting testcases. Upstream gtkdoc is receptive, but getting anything in takes forever and then there's the 6 month release schedule too. And there's also the problem that we can't change the kerneldoc grammar (e.g. gtkdoc has the code comment parser integrated and ofc it has slightly different rules to mark up references to structs/enums).

I'm also trying to build up a doc team here with a full-time tech writer for drm/i915 topics. So I'm very much interested in keeping this all alive. But I don't have the time to mass-convert everything else, and I'm also not sure it's a good idea: In my experience all the doc toolchain suck somewhat, and it's better to be consistent within a project instead of proliferating different solutions. It's hard enough already to get developers to write docs and even harder to find someone who writes good docs ...

Ofc we already have a big split between the ad-hoc text files in Documentation and the docbook stuff in Documentation/DocBook. Otoh docbook is the only way to extract the kerneldoc comments into something readable and indexed.

Quoted 11 lines
Quoted 10 lines
Quoted 4 lines

I will not make #2 be a precondition to getting some form of this work merged, but I would like to have a good answer for #1. Adding such a heavyweight dependency (even as an optional one) needs to have a pretty good story behind it.

Should we discuss #1 at ks? Imo as long as no one pipes up to do the massive conversion away from the current toolchain (and subsystem maintainers won't just kill that effort because it causes too much churn) moving forward with the kerneldoc toolchain we have makes sense. Hence I'd like to see those patches landed before we resolve #1 if possible.

Quoted 3 lines

I've tossed the topic out there; the kernel summit agenda hasn't been made yet, though. In any case, I'd be happy to resolve this particular issue before then if it were possible.

I don't mind much if we delay this part until KS. All the text markup styles are pretty close. So fixing up one dialect for another for the few patches I'll likely pull in for 4.4 won't be a lot of work if we decide to go with something else. Or even if we decide to switch markup styles much later, it should all be doable with a few sed jobs.

Only problem I see is that thus far no one else seems to care much, and if we change the approach I need to convince management here again that we need to invest some time to make it happen (and some excuses why this approach here wasn't ok). That will probably suck down more time than converting to whatever we decide on. And like I said I personally don't care one bit what the toolchain looks like or the exact flavour of text markup we pick.

Cheers, Daniel

Signature · 3 lines
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch
#14 lore raw
Quoted 8 lines · Daniel Vetter
Quoted 7 lines · Jonathan Corbet
Quoted 4 lines · On Sun, 13 Sep 2015 12:36:07 +0200 Daniel Vetter <[email protected]> wrote:

Personally I don't care which kind of text markup we pick and wich converter, as long as the project looks reasonable far away from immeninent death (way too many one-person projects on github in this area).

I wouldn't care either. I choose pandoc as it's old, kind of stable and has a decent community around it, so it won't probably die due the lack of interested developers.

That said, cmark is not a option (at least for now). With the current approach we need a tool capable of reading markdown text and output DocBook tags, as we're actually still using docbook to spit all kinds of Documentation formats (html, man, pdf). Looks like cmark can only do markdown->html.

I did look into other options though, but they were all mostly one-man job. But yeah, basically any tool capable of converting markdown->docbook will work. I'm always listening to suggestions =)

Quoted 13 lines
Quoted 13 lines
Quoted 6 lines

But if we have this discussion I'd like to decouple it from the other kerneldoc improvemnts in this series (patches 1, 5 and 6). If we cant agree on the text markup then drm docs will simply look a bit funny for everyone else. But if the inline struct stuff won't happen 0-day will scream around (and there's already patches which use the new layout).

Those patches are:

1)  scripts/kernel-doc: Replacing highlights hash by an array
5)  scripts/kernel-doc: Improve Markdown results
6)  scripts/kernel-doc: Processing -nofunc for functions only
Quoted 5 lines
Quoted 5 lines

#1 is fine, I'll merge that today. #6 is already merged. #5 is a markdown patch, though, and doesn't make sense without the others? Are you thinking about #3 (drm/doc: Convert to markdown)? That one would almost work (it depends on #2 currently) and it nicely shows *why* I'd like to get away from XML...

#5 is the DRM markdown conversion, which depends on #2 and #4. So if a decision about this is going during KS, we need to hold those three patches.

Quoted 109 lines

Sorry I mixed things up, #5 is ok to leave out. I thought about "scripts/kernel-doc Allow struct arguments documentation in struct body" but you already merged that one for 4.2. Which I missed, but which is great since that's the one that would cause the big conflicts.

Quoted 17 lines
Quoted 9 lines
Quoted 5 lines

2 We're constructing an increasingly complicated document-processing
mechanism with a lot of independently moving parts. What if we converted the whole document to markdown and dispensed with the XML part altogether? Making the source files simpler and dispensing with the xmlto requirement would be a big win, IMO.

Who's going to convert the almost 30kloc of xml template (which often have large amounts of texts) and the over 60k kerneldoc comments that we have already?

I thought you'd do that :)

Seriously, though, a change would be a big job. There's a reason I've said several times that it would make no sense to delay the work at hand in the hopes of somebody doing this whole job instead. But we can certainly ponder what might be better.

Quoted 5 lines

Getting rid of the XML stuff may well simplify the whole process and make the documentation much more accessible for those who would change it; that could be a goal worth going for. Oh, and anything requiring changes to the kerneldoc comments is going nowhere, that was never something I'd contemplated. Those comments are fine.

Well my goal is to be able to have all the programmer docs in the code, including any high-level overview sections to tie everything together (hence hyperlinks and better formatting). But then you still need some skeleton to make a coherent whole out of all the parts, and I think the docbook xml templates we have serve rather fine for that role. Writing text in xml is indeed horrid, but if we can create in-line DOC: sections with decent formatting there's really no need for that. From that angle this work here already has the goal to get rid of the xml - I plane to move all the existing text in the drm.tmpl xml into inline DOC: kerneldoc commets.

And at least gtkdoc (which we use extensively for the userpace test/tools repo) relies on some xml thing to tie different topics together too. So that seems pretty standard.

Quoted 5 lines

But any such change needs a lot of thought and a reasonable proof of concept. Meanwhile we have work that can make the docs better now, and I want to merge it. But we should choose the tools we use carefully, and I anticipate a lot of opposition to one that has to drag in 70 Haskell packages with it.

Well personally I don't care about the exact tooling, as long as:
- it's a reasonable alive project
- packages available on distros (works for me on both debian and fedora)
- we can muck around with how things are integrated into overall docs (which is the case since pandoc is only used as a paragraph formatter here).

The last one is something we stumbled over for the userspace side where we wanted to have better tooling for documenting testcases. Upstream gtkdoc is receptive, but getting anything in takes forever and then there's the 6 month release schedule too. And there's also the problem that we can't change the kerneldoc grammar (e.g. gtkdoc has the code comment parser integrated and ofc it has slightly different rules to mark up references to structs/enums).

I'm also trying to build up a doc team here with a full-time tech writer for drm/i915 topics. So I'm very much interested in keeping this all alive. But I don't have the time to mass-convert everything else, and I'm also not sure it's a good idea: In my experience all the doc toolchain suck somewhat, and it's better to be consistent within a project instead of proliferating different solutions. It's hard enough already to get developers to write docs and even harder to find someone who writes good docs ...

Ofc we already have a big split between the ad-hoc text files in Documentation and the docbook stuff in Documentation/DocBook. Otoh docbook is the only way to extract the kerneldoc comments into something readable and indexed.

Quoted 11 lines
Quoted 10 lines
Quoted 4 lines

I will not make #2 be a precondition to getting some form of this work merged, but I would like to have a good answer for #1. Adding such a heavyweight dependency (even as an optional one) needs to have a pretty good story behind it.

Should we discuss #1 at ks? Imo as long as no one pipes up to do the massive conversion away from the current toolchain (and subsystem maintainers won't just kill that effort because it causes too much churn) moving forward with the kerneldoc toolchain we have makes sense. Hence I'd like to see those patches landed before we resolve #1 if possible.

Quoted 3 lines

I've tossed the topic out there; the kernel summit agenda hasn't been made yet, though. In any case, I'd be happy to resolve this particular issue before then if it were possible.

I don't mind much if we delay this part until KS. All the text markup styles are pretty close. So fixing up one dialect for another for the few patches I'll likely pull in for 4.4 won't be a lot of work if we decide to go with something else. Or even if we decide to switch markup styles much later, it should all be doable with a few sed jobs.

Only problem I see is that thus far no one else seems to care much, and if we change the approach I need to convince management here again that we need to invest some time to make it happen (and some excuses why this approach here wasn't ok). That will probably suck down more time than converting to whatever we decide on. And like I said I personally don't care one bit what the toolchain looks like or the exact flavour of text markup we pick.

Quoted 2 lines

Cheers, Daniel

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel