ASoC: make dapm cache search depth configurable
PATCH 1/1 ASoC: make dapm cache search depth configurable
cache search depth will have a default value of 2 and can be modified by the respective component probe function
--- include/sound/soc-dapm.h | 1 + sound/soc/soc-core.c | 2 ++ sound/soc/soc-dapm.c | 5 +++-- 3 files changed, 6 insertions(+), 2 deletions(-)
include/sound/soc-dapm.h +1 -0
@@ -629,6 +629,7 @@ struct snd_soc_dapm_context {struct snd_soc_dapm_wcache path_sink_cache;struct snd_soc_dapm_wcache path_source_cache; +unsigned int cache_search_depth;#ifdef CONFIG_DEBUG_FS struct dentry *debugfs_dapm;
sound/soc/soc-core.c +2 -0
@@ -1595,6 +1595,7 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) card->dapm.bias_level =SND_SOC_BIAS_OFF ; card->dapm.dev = card->dev; card->dapm.card = card; + card->dapm.cache_search_depth =2 ;list_add (&card->dapm.list, &card->dapm_list);#ifdef CONFIG_DEBUG_FS
@@ -2665,6 +2666,7 @@ static int snd_soc_component_initialize(struct snd_soc_component *component, component->remove = component->driver->remove; dapm = &component->dapm; + dapm->cache_search_depth =2 ; dapm->dev = dev; dapm->component = component; dapm->bias_level =SND_SOC_BIAS_OFF ;
sound/soc/soc-dapm.c +3 -2
@@ -580,11 +580,12 @@ dapm_wcache_lookup(struct snd_soc_dapm_wcache *wcache, const char *name) {struct snd_soc_dapm_widget *w = wcache->widget;struct list_head *wlist; -const int depth =2 ; +int depth;int i =0 ; -if (w) { +if (w && w->dapm->cache_search_depth) { wlist = &w->dapm->card->widgets; + depth = w->dapm->cache_search_depth;list_for_each_entry_from (w, wlist, list) {if (!strcmp (name, w->name))
Signature · 1 line
1.7.9.5
Mark Brown
maintainerQuoted 2 lines · Nikesh Oswal
cache search depth will have a default value of 2 and can be modified by the respective component probe function
Why?
Hi Mark,
The reason I though this will be usefull is as below:
While adding paths the source or sink widgets of consecutive path that are being added, may not be immediate neighbours in widget list. Hence in such scenarios the cache hits will reduce. One possible solution is to rearrange the widgets in the codec driver but sometimes codec driver uses some macros to create a bunch of related widgets which we may want to skip in the cache search. So a configurable cache search depth caters to such scenarios.
For example in wm5110.c the frequently occuring mixer routes are defined by ARIZONA_MIXER_INPUT_ROUTES, so as to maximise the cache hit codec driver can register all the source widgets in exactly the same order (by rearranging the widgets in wm5110_dapm_widgets[]) as defined in this macro. But if you notice the way DSP widgets are created they use a WM_ADSP2 macro which creates a preloader widget for every DSP widget and we want to skip past this preloader widget when doing a cache search so increasing the cache search depth helps here.
Thanks,
Nikesh
Quoted 4 lines · Mark Brown
Quoted 2 lines · Nikesh Oswal
cache search depth will have a default value of 2 and can be modified by the respective component probe function
Why?
Mark Brown
maintainerQuoted 1 line · Nikesh
Hi Mark,
As I'm fairly sure I've had to tell you before don't top post. This means that when someone sees something like this:
Quoted 1 line
The reason I though this will be usefull is as below:
while reading they know what the "this" you are talking about is.
Quoted 5 lines
the widgets in wm5110_dapm_widgets[]) as defined in this macro. But if you notice the way DSP widgets are created they use a
WM_ADSP2macro which creates a preloader widget for every DSP widget and we want to skip past this preloader widget when doing a cache search so increasing the cache search depth helps here.
Why is the solution to this problem to add device specific tuning? Is this extremely expensive so no other device would want it?