Skip to contentSkip to conversation

drm/atomic-helper: Implement drm_atomic_helper_duplicate_state()

PATCH Applied Thierry Reding 2 participants 4 messages Sep 8, 2015

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/2 drm/atomic-helper: Implement drm_atomic_helper_duplicate_state()

From: Thierry Reding <[email protected]>

This function can be used to duplicate an atomic state object. This is useful for example to implement suspend/resume, where the state before suspend can be saved and restored upon resume.

v2: move locking to caller, be more explicit about prerequisites
v3: explicitly pass lock acquisition context, improve kerneldoc

---
 drivers/gpu/drm/drm_atomic_helper.c | 78 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_atomic_helper.h     |  3 ++
 2 files changed, 81 insertions(+)
drivers/gpu/drm/drm_atomic_helper.c +78 -0
index 634aa617811b..3232f4b838e4 100644
@@ -2349,6 +2349,84 @@ drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector)
 EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
 
 /**
+ * drm_atomic_helper_duplicate_state - duplicate an atomic state object
+ * @dev: DRM device
+ * @ctx: lock acquisition context
+ *
+ * Makes a copy of the current atomic state by looping over all objects and
+ * duplicating their respective states.
+ *
+ * Note that this treats atomic state as persistent between save and restore.
+ * Drivers must make sure that this is possible and won't result in confusion
+ * or erroneous behaviour.
+ *
+ * Note that if callers haven't already acquired all modeset locks this might
+ * return -EDEADLK, which must be handled by calling drm_modeset_backoff().
+ *
+ * Returns:
+ * A pointer to the copy of the atomic state object on success or an
+ * ERR_PTR()-encoded error code on failure.
+ */
+struct drm_atomic_state *
+drm_atomic_helper_duplicate_state(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_atomic_state *state;
+	struct drm_connector *conn;
+	struct drm_plane *plane;
+	struct drm_crtc *crtc;
+	int err = 0;
+
+	state = drm_atomic_state_alloc(dev);
+	if (!state)
+		return ERR_PTR(-ENOMEM);
+
+	state->acquire_ctx = ctx;
+
+	drm_for_each_crtc(crtc, dev) {
+		struct drm_crtc_state *crtc_state;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state)) {
+			err = PTR_ERR(crtc_state);
+			goto free;
+		}
+	}
+
+	drm_for_each_plane(plane, dev) {
+		struct drm_plane_state *plane_state;
+
+		plane_state = drm_atomic_get_plane_state(state, plane);
+		if (IS_ERR(plane_state)) {
+			err = PTR_ERR(plane_state);
+			goto free;
+		}
+	}
+
+	drm_for_each_connector(conn, dev) {
+		struct drm_connector_state *conn_state;
+
+		conn_state = drm_atomic_get_connector_state(state, conn);
+		if (IS_ERR(conn_state)) {
+			err = PTR_ERR(conn_state);
+			goto free;
+		}
+	}
+
+	/* clear the acquire context so that it isn't accidentally reused */
+	state->acquire_ctx = NULL;
+
+free:
+	if (err < 0) {
+		drm_atomic_state_free(state);
+		state = ERR_PTR(err);
+	}
+
+	return state;
+}
+EXPORT_SYMBOL(drm_atomic_helper_duplicate_state);
+
+/**
  * __drm_atomic_helper_connector_destroy_state - release connector state
  * @connector: connector object
  * @state: connector state object to release
include/drm/drm_atomic_helper.h +3 -0
index 4ffe9dca07c4..1547eb43c14a 100644
@@ -118,6 +118,9 @@ __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
 					   struct drm_connector_state *state);
 struct drm_connector_state *
 drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector);
+struct drm_atomic_state *
+drm_atomic_helper_duplicate_state(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx);
 void
 __drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
 					    struct drm_connector_state *state);
Signature · 6 lines
2.5.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#1 lore raw

PATCH v3 2/2 drm/atomic-helper: Implement subsystem-level suspend/resume

From: Thierry Reding <[email protected]>

Provide subsystem-level suspend and resume helpers that can be used to implement suspend/resume on atomic mode-setting enabled drivers.

v2: simplify locking, enhance kerneldoc comments
v3: pass lock acquisition context by parameter, improve kerneldoc

---
 drivers/gpu/drm/drm_atomic_helper.c | 165 +++++++++++++++++++++++++++++++++++-
 drivers/gpu/drm/drm_crtc_helper.c   |   6 ++
 include/drm/drm_atomic_helper.h     |   6 ++
 3 files changed, 176 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_atomic_helper.c +164 -1
index 3232f4b838e4..31823dc8a406 100644
@@ -1742,6 +1742,164 @@ backoff:
 EXPORT_SYMBOL(drm_atomic_helper_set_config);
 
 /**
+ * drm_atomic_helper_disable_all - disable all currently active outputs
+ * @dev: DRM device
+ * @ctx: lock acquisition context
+ *
+ * Loops through all connectors, finding those that aren't turned off and then
+ * turns them off by setting their DPMS mode to OFF and deactivating the CRTC
+ * that they are connected to.
+ *
+ * This is used for example in suspend/resume to disable all currently active
+ * functions when suspending.
+ *
+ * Note that if callers haven't already acquired all modeset locks this might
+ * return -EDEADLK, which must be handled by calling drm_modeset_backoff().
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
+ */
+int drm_atomic_helper_disable_all(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_connector *conn;
+	unsigned int i;
+	int err;
+
+	state = drm_atomic_state_alloc(dev);
+	if (!state)
+		return -ENOMEM;
+
+	state->acquire_ctx = ctx;
+
+	drm_for_each_connector(conn, dev) {
+		struct drm_crtc *crtc = conn->state->crtc;
+		struct drm_crtc_state *crtc_state;
+
+		if (!crtc || conn->dpms != DRM_MODE_DPMS_ON)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state)) {
+			err = PTR_ERR(crtc_state);
+			goto free;
+		}
+
+		err = drm_atomic_add_affected_connectors(state, crtc);
+		if (err < 0)
+			goto free;
+
+		conn->dpms = DRM_MODE_DPMS_OFF;
+		crtc_state->active = false;
+	}
+
+	err = drm_atomic_commit(state);
+	if (err < 0) {
+		/* restore DPMS mode */
+		for_each_connector_in_state(state, conn, conn_state, i)
+			conn->dpms = DRM_MODE_DPMS_ON;
+
+		goto free;
+	}
+
+free:
+	if (err < 0)
+		drm_atomic_state_free(state);
+
+	return err;
+}
+EXPORT_SYMBOL(drm_atomic_helper_disable_all);
+
+/**
+ * drm_atomic_helper_suspend - subsystem-level suspend helper
+ * @dev: DRM device
+ *
+ * Duplicates the current atomic state, disables all active outputs and then
+ * returns a pointer to the original atomic state to the caller. Drivers can
+ * pass this pointer to the drm_atomic_helper_resume() helper upon resume to
+ * restore the output configuration that was active at the time the system
+ * entered suspend.
+ *
+ * Note that it is potentially unsafe to use this. The atomic state object
+ * returned by this function is assumed to be persistent. Drivers must ensure
+ * that this holds true. Before calling this function, drivers must make sure
+ * to suspend fbdev emulation so that nothing can be using the device.
+ *
+ * Returns:
+ * A pointer to a copy of the state before suspend on success or an ERR_PTR()-
+ * encoded error code on failure. Drivers should store the returned atomic
+ * state object and pass it to the drm_atomic_helper_resume() helper upon
+ * resume.
+ *
+ * See also:
+ * drm_atomic_helper_duplicate_state(), drm_atomic_helper_disable_all(),
+ * drm_atomic_helper_resume()
+ */
+struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev)
+{
+	struct drm_modeset_acquire_ctx ctx;
+	struct drm_atomic_state *state;
+	int err;
+
+	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_lock_all_ctx(dev, &ctx);
+
+	state = drm_atomic_helper_duplicate_state(dev, &ctx);
+	if (IS_ERR(state))
+		goto unlock;
+
+	err = drm_atomic_helper_disable_all(dev, &ctx);
+	if (err < 0) {
+		drm_atomic_state_free(state);
+		state = ERR_PTR(err);
+		goto unlock;
+	}
+
+unlock:
+	drm_modeset_unlock_all_ctx(dev, &ctx);
+	drm_modeset_acquire_fini(&ctx);
+	return state;
+}
+EXPORT_SYMBOL(drm_atomic_helper_suspend);
+
+/**
+ * drm_atomic_helper_resume - subsystem-level resume helper
+ * @dev: DRM device
+ * @state: atomic state to resume to
+ *
+ * Calls drm_mode_config_reset() to synchronize hardware and software states,
+ * grabs all modeset locks and commits the atomic state object. This can be
+ * used in conjunction with the drm_atomic_helper_suspend() helper to
+ * implement suspend/resume for drivers that support atomic mode-setting.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend()
+ */
+int drm_atomic_helper_resume(struct drm_device *dev,
+			     struct drm_atomic_state *state)
+{
+	struct drm_mode_config *config = &dev->mode_config;
+	int err;
+
+	drm_mode_config_reset(dev);
+	drm_modeset_lock_all(dev);
+	state->acquire_ctx = config->acquire_ctx;
+	err = drm_atomic_commit(state);
+	drm_modeset_unlock_all(dev);
+
+	return err;
+}
+EXPORT_SYMBOL(drm_atomic_helper_resume);
+
+/**
  * drm_atomic_helper_crtc_set_property - helper for crtc properties
  * @crtc: DRM crtc
  * @property: DRM property
@@ -2354,7 +2512,9 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
  * @ctx: lock acquisition context
  *
  * Makes a copy of the current atomic state by looping over all objects and
- * duplicating their respective states.
+ * duplicating their respective states. This is used for example by suspend/
+ * resume support code to save the state prior to suspend such that it can
+ * be restored upon resume.
  *
  * Note that this treats atomic state as persistent between save and restore.
  * Drivers must make sure that this is possible and won't result in confusion
@@ -2366,6 +2526,9 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
  * Returns:
  * A pointer to the copy of the atomic state object on success or an
  * ERR_PTR()-encoded error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
  */
 struct drm_atomic_state *
 drm_atomic_helper_duplicate_state(struct drm_device *dev,
drivers/gpu/drm/drm_crtc_helper.c +6 -0
index ef534758a02c..08620a25fe06 100644
@@ -855,6 +855,12 @@ EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
  * due to slight differences in allocating shared resources when the
  * configuration is restored in a different order than when userspace set it up)
  * need to use their own restore logic.
+ *
+ * This function is deprecated. New drivers should implement atomic mode-
+ * setting and use the atomic suspend/resume helpers.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
  */
 void drm_helper_resume_force_mode(struct drm_device *dev)
 {
include/drm/drm_atomic_helper.h +6 -0
index 1547eb43c14a..98ffcb231079 100644
@@ -75,6 +75,12 @@ int drm_atomic_helper_update_plane(struct drm_plane *plane,
 int drm_atomic_helper_disable_plane(struct drm_plane *plane);
 int drm_atomic_helper_set_config(struct drm_mode_set *set);
 
+int drm_atomic_helper_disable_all(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx);
+struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev);
+int drm_atomic_helper_resume(struct drm_device *dev,
+			     struct drm_atomic_state *state);
+
 int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
 					struct drm_property *property,
 					uint64_t val);
Signature · 6 lines
2.5.0

_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#2 lore raw

Re: [PATCH v3 2/2] drm/atomic-helper: Implement subsystem-level suspend/resume

Quoted 62 lines · Thierry Reding

From: Thierry Reding <[email protected]>

Provide subsystem-level suspend and resume helpers that can be used to implement suspend/resume on atomic mode-setting enabled drivers.

v2: simplify locking, enhance kerneldoc comments
v3: pass lock acquisition context by parameter, improve kerneldoc

---
 drivers/gpu/drm/drm_atomic_helper.c | 165 +++++++++++++++++++++++++++++++++++-
 drivers/gpu/drm/drm_crtc_helper.c   |   6 ++
 include/drm/drm_atomic_helper.h     |   6 ++
 3 files changed, 176 insertions(+), 1 deletion(-)
drivers/gpu/drm/drm_atomic_helper.c +39 -0
index 3232f4b838e4..31823dc8a406 100644
@@ -1742,6 +1742,164 @@ backoff:
 EXPORT_SYMBOL(drm_atomic_helper_set_config);
 
 /**
+ * drm_atomic_helper_disable_all - disable all currently active outputs
+ * @dev: DRM device
+ * @ctx: lock acquisition context
+ *
+ * Loops through all connectors, finding those that aren't turned off and then
+ * turns them off by setting their DPMS mode to OFF and deactivating the CRTC
+ * that they are connected to.
+ *
+ * This is used for example in suspend/resume to disable all currently active
+ * functions when suspending.
+ *
+ * Note that if callers haven't already acquired all modeset locks this might
+ * return -EDEADLK, which must be handled by calling drm_modeset_backoff().
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
+ */
+int drm_atomic_helper_disable_all(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_connector_state *conn_state;
+	struct drm_atomic_state *state;
+	struct drm_connector *conn;
+	unsigned int i;
+	int err;
+
+	state = drm_atomic_state_alloc(dev);
+	if (!state)
+		return -ENOMEM;
+
+	state->acquire_ctx = ctx;
+
+	drm_for_each_connector(conn, dev) {
+		struct drm_crtc *crtc = conn->state->crtc;
+		struct drm_crtc_state *crtc_state;
+

drivers/gpu/drm/drm_atomic_helper.c backoff: · line 1793

Quoted 10 lines
drivers/gpu/drm/drm_atomic_helper.c +10 -0
+		if (!crtc || conn->dpms != DRM_MODE_DPMS_ON)
+			continue;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state)) {
+			err = PTR_ERR(crtc_state);
+			goto free;
+		}
+
+		err = drm_atomic_add_affected_connectors(state, crtc);

Just elaborating on what Maarten spotted on irc.

You don't need to do this, atomic helpers will do this for you.

drivers/gpu/drm/drm_atomic_helper.c backoff: · line 1797

Quoted 4 lines
drivers/gpu/drm/drm_atomic_helper.c +4 -0
+		if (err < 0)
+			goto free;
+
+		conn->dpms = DRM_MODE_DPMS_OFF;

No need to touch legacy dpms state, that's again updated for you in drm_atomic_helper_update_legacy_modeset_state.

drivers/gpu/drm/drm_atomic_helper.c backoff: · line 1805

Quoted 8 lines
drivers/gpu/drm/drm_atomic_helper.c +8 -0
+		crtc_state->active = false;
+	}
+
+	err = drm_atomic_commit(state);
+	if (err < 0) {
+		/* restore DPMS mode */
+		for_each_connector_in_state(state, conn, conn_state, i)
+			conn->dpms = DRM_MODE_DPMS_ON;

Same here.
-Daniel

Quoted 158 lines
drivers/gpu/drm/drm_atomic_helper.c +103 -1
+
+		goto free;
+	}
+
+free:
+	if (err < 0)
+		drm_atomic_state_free(state);
+
+	return err;
+}
+EXPORT_SYMBOL(drm_atomic_helper_disable_all);
+
+/**
+ * drm_atomic_helper_suspend - subsystem-level suspend helper
+ * @dev: DRM device
+ *
+ * Duplicates the current atomic state, disables all active outputs and then
+ * returns a pointer to the original atomic state to the caller. Drivers can
+ * pass this pointer to the drm_atomic_helper_resume() helper upon resume to
+ * restore the output configuration that was active at the time the system
+ * entered suspend.
+ *
+ * Note that it is potentially unsafe to use this. The atomic state object
+ * returned by this function is assumed to be persistent. Drivers must ensure
+ * that this holds true. Before calling this function, drivers must make sure
+ * to suspend fbdev emulation so that nothing can be using the device.
+ *
+ * Returns:
+ * A pointer to a copy of the state before suspend on success or an ERR_PTR()-
+ * encoded error code on failure. Drivers should store the returned atomic
+ * state object and pass it to the drm_atomic_helper_resume() helper upon
+ * resume.
+ *
+ * See also:
+ * drm_atomic_helper_duplicate_state(), drm_atomic_helper_disable_all(),
+ * drm_atomic_helper_resume()
+ */
+struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev)
+{
+	struct drm_modeset_acquire_ctx ctx;
+	struct drm_atomic_state *state;
+	int err;
+
+	drm_modeset_acquire_init(&ctx, 0);
+	drm_modeset_lock_all_ctx(dev, &ctx);
+
+	state = drm_atomic_helper_duplicate_state(dev, &ctx);
+	if (IS_ERR(state))
+		goto unlock;
+
+	err = drm_atomic_helper_disable_all(dev, &ctx);
+	if (err < 0) {
+		drm_atomic_state_free(state);
+		state = ERR_PTR(err);
+		goto unlock;
+	}
+
+unlock:
+	drm_modeset_unlock_all_ctx(dev, &ctx);
+	drm_modeset_acquire_fini(&ctx);
+	return state;
+}
+EXPORT_SYMBOL(drm_atomic_helper_suspend);
+
+/**
+ * drm_atomic_helper_resume - subsystem-level resume helper
+ * @dev: DRM device
+ * @state: atomic state to resume to
+ *
+ * Calls drm_mode_config_reset() to synchronize hardware and software states,
+ * grabs all modeset locks and commits the atomic state object. This can be
+ * used in conjunction with the drm_atomic_helper_suspend() helper to
+ * implement suspend/resume for drivers that support atomic mode-setting.
+ *
+ * Returns:
+ * 0 on success or a negative error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend()
+ */
+int drm_atomic_helper_resume(struct drm_device *dev,
+			     struct drm_atomic_state *state)
+{
+	struct drm_mode_config *config = &dev->mode_config;
+	int err;
+
+	drm_mode_config_reset(dev);
+	drm_modeset_lock_all(dev);
+	state->acquire_ctx = config->acquire_ctx;
+	err = drm_atomic_commit(state);
+	drm_modeset_unlock_all(dev);
+
+	return err;
+}
+EXPORT_SYMBOL(drm_atomic_helper_resume);
+
+/**
  * drm_atomic_helper_crtc_set_property - helper for crtc properties
  * @crtc: DRM crtc
  * @property: DRM property
@@ -2354,7 +2512,9 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
  * @ctx: lock acquisition context
  *
  * Makes a copy of the current atomic state by looping over all objects and
- * duplicating their respective states.
+ * duplicating their respective states. This is used for example by suspend/
+ * resume support code to save the state prior to suspend such that it can
+ * be restored upon resume.
  *
  * Note that this treats atomic state as persistent between save and restore.
  * Drivers must make sure that this is possible and won't result in confusion
@@ -2366,6 +2526,9 @@ EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
  * Returns:
  * A pointer to the copy of the atomic state object on success or an
  * ERR_PTR()-encoded error code on failure.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
  */
 struct drm_atomic_state *
 drm_atomic_helper_duplicate_state(struct drm_device *dev,
drivers/gpu/drm/drm_crtc_helper.c +6 -0
index ef534758a02c..08620a25fe06 100644
@@ -855,6 +855,12 @@ EXPORT_SYMBOL(drm_helper_mode_fill_fb_struct);
  * due to slight differences in allocating shared resources when the
  * configuration is restored in a different order than when userspace set it up)
  * need to use their own restore logic.
+ *
+ * This function is deprecated. New drivers should implement atomic mode-
+ * setting and use the atomic suspend/resume helpers.
+ *
+ * See also:
+ * drm_atomic_helper_suspend(), drm_atomic_helper_resume()
  */
 void drm_helper_resume_force_mode(struct drm_device *dev)
 {
include/drm/drm_atomic_helper.h +6 -0
index 1547eb43c14a..98ffcb231079 100644
@@ -75,6 +75,12 @@ int drm_atomic_helper_update_plane(struct drm_plane *plane,
 int drm_atomic_helper_disable_plane(struct drm_plane *plane);
 int drm_atomic_helper_set_config(struct drm_mode_set *set);
 
+int drm_atomic_helper_disable_all(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx);
+struct drm_atomic_state *drm_atomic_helper_suspend(struct drm_device *dev);
+int drm_atomic_helper_resume(struct drm_device *dev,
+			     struct drm_atomic_state *state);
+
 int drm_atomic_helper_crtc_set_property(struct drm_crtc *crtc,
 					struct drm_property *property,
 					uint64_t val);
Signature · 1 line
2.5.0
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
#3 lore raw
In reply to Thierry Reding
Quoted 10 lines · Thierry Reding

From: Thierry Reding <[email protected]>

This function can be used to duplicate an atomic state object. This is useful for example to implement suspend/resume, where the state before suspend can be saved and restored upon resume.

v2: move locking to caller, be more explicit about prerequisites
v3: explicitly pass lock acquisition context, improve kerneldoc

Applied to drm-misc with 2 tiny spelling fixes in the kerneldoc.

Thanks, Daniel

Quoted 111 lines
---
 drivers/gpu/drm/drm_atomic_helper.c | 78 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_atomic_helper.h     |  3 ++
 2 files changed, 81 insertions(+)
drivers/gpu/drm/drm_atomic_helper.c +78 -0
index 634aa617811b..3232f4b838e4 100644
@@ -2349,6 +2349,84 @@ drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector)
 EXPORT_SYMBOL(drm_atomic_helper_connector_duplicate_state);
 
 /**
+ * drm_atomic_helper_duplicate_state - duplicate an atomic state object
+ * @dev: DRM device
+ * @ctx: lock acquisition context
+ *
+ * Makes a copy of the current atomic state by looping over all objects and
+ * duplicating their respective states.
+ *
+ * Note that this treats atomic state as persistent between save and restore.
+ * Drivers must make sure that this is possible and won't result in confusion
+ * or erroneous behaviour.
+ *
+ * Note that if callers haven't already acquired all modeset locks this might
+ * return -EDEADLK, which must be handled by calling drm_modeset_backoff().
+ *
+ * Returns:
+ * A pointer to the copy of the atomic state object on success or an
+ * ERR_PTR()-encoded error code on failure.
+ */
+struct drm_atomic_state *
+drm_atomic_helper_duplicate_state(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_atomic_state *state;
+	struct drm_connector *conn;
+	struct drm_plane *plane;
+	struct drm_crtc *crtc;
+	int err = 0;
+
+	state = drm_atomic_state_alloc(dev);
+	if (!state)
+		return ERR_PTR(-ENOMEM);
+
+	state->acquire_ctx = ctx;
+
+	drm_for_each_crtc(crtc, dev) {
+		struct drm_crtc_state *crtc_state;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state)) {
+			err = PTR_ERR(crtc_state);
+			goto free;
+		}
+	}
+
+	drm_for_each_plane(plane, dev) {
+		struct drm_plane_state *plane_state;
+
+		plane_state = drm_atomic_get_plane_state(state, plane);
+		if (IS_ERR(plane_state)) {
+			err = PTR_ERR(plane_state);
+			goto free;
+		}
+	}
+
+	drm_for_each_connector(conn, dev) {
+		struct drm_connector_state *conn_state;
+
+		conn_state = drm_atomic_get_connector_state(state, conn);
+		if (IS_ERR(conn_state)) {
+			err = PTR_ERR(conn_state);
+			goto free;
+		}
+	}
+
+	/* clear the acquire context so that it isn't accidentally reused */
+	state->acquire_ctx = NULL;
+
+free:
+	if (err < 0) {
+		drm_atomic_state_free(state);
+		state = ERR_PTR(err);
+	}
+
+	return state;
+}
+EXPORT_SYMBOL(drm_atomic_helper_duplicate_state);
+
+/**
  * __drm_atomic_helper_connector_destroy_state - release connector state
  * @connector: connector object
  * @state: connector state object to release
include/drm/drm_atomic_helper.h +3 -0
index 4ffe9dca07c4..1547eb43c14a 100644
@@ -118,6 +118,9 @@ __drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector,
 					   struct drm_connector_state *state);
 struct drm_connector_state *
 drm_atomic_helper_connector_duplicate_state(struct drm_connector *connector);
+struct drm_atomic_state *
+drm_atomic_helper_duplicate_state(struct drm_device *dev,
+				  struct drm_modeset_acquire_ctx *ctx);
 void
 __drm_atomic_helper_connector_destroy_state(struct drm_connector *connector,
 					    struct drm_connector_state *state);
Signature · 1 line
2.5.0
Signature · 7 lines
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel