Skip to contentSkip to conversation

ARM: dts: sun4i: Fix itead-iteaduino-plus reference in Makefile

PATCH New Hans de Goede 2 participants 6 messages Sep 9, 2015 – Sep 10, 2015

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/3 ARM: dts: sun4i: Fix itead-iteaduino-plus reference in Makefile

Tell make to build a dtb, rather then the already existing dts.

---
 arch/arm/boot/dts/Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/boot/dts/Makefile +1 -1
index 6d43044..e12aeae 100644
@@ -554,7 +554,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
 	sun4i-a10-inet97fv2.dtb \
-	sun4i-a10-itead-iteaduino-plus.dts \
+	sun4i-a10-itead-iteaduino-plus.dtb \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
 	sun4i-a10-mini-xplus.dtb \
Signature · 1 line
2.4.3
#1 lore raw

PATCH 2/3 ARM: dts: sun4i: Add dts file inet9f-rev03 based tablets

The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet.

These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen.

Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot.

---
 arch/arm/boot/dts/Makefile                   |   1 +
 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts | 227 +++++++++++++++++++++++++++
 2 files changed, 228 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts
arch/arm/boot/dts/Makefile +1 -0
index e12aeae..c7b96be 100644
@@ -554,6 +554,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
 	sun4i-a10-inet97fv2.dtb \
+	sun4i-a10-inet9f-rev03.dtb \
 	sun4i-a10-itead-iteaduino-plus.dtb \
 	sun4i-a10-jesurun-q5.dtb \
 	sun4i-a10-marsboard.dtb \
arch/arm/boot/dts/sun4i-a10-inet9f-rev03.dts new file +227 -0

227 lines not on this page · raw message

Signature · 1 line
2.4.3
#2 lore raw

PATCH 2/3 ARM: dts: sun4i: Add dts file inet9f-rev03 based tablets

Quoted 10 lines · Hans de Goede

The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet.

These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen.

Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot.

Queued, thanks!

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150910/dd998521/attachment.sig>
#3 lore raw

PATCH 3/3 ARM: dts: sun4i: Add dts file for iNet-1 based tablets

In reply to Hans de Goede

The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007.

This patch has been tested on both rev2 and rev5 of this board / these tablets.

It comes with a rtl8188cus usb wifi connected to ehci1, focal ft5406ee8 touchscreen connected to i2c2 addr 0x38, bosch bma 250 accelerometer connected to i2c1 addr 0x18 and the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot.

---
 arch/arm/boot/dts/Makefile            |   1 +
 arch/arm/boot/dts/sun4i-a10-inet1.dts | 226 ++++++++++++++++++++++++++++++++++
 2 files changed, 227 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun4i-a10-inet1.dts
arch/arm/boot/dts/Makefile +1 -0
index c7b96be..746c7ba 100644
@@ -553,6 +553,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-gemei-g9.dtb \
 	sun4i-a10-hackberry.dtb \
 	sun4i-a10-hyundai-a7hd.dtb \
+	sun4i-a10-inet1.dtb \
 	sun4i-a10-inet97fv2.dtb \
 	sun4i-a10-inet9f-rev03.dtb \
 	sun4i-a10-itead-iteaduino-plus.dtb \
arch/arm/boot/dts/sun4i-a10-inet1.dts new file +226 -0

226 lines not on this page · raw message

Signature · 1 line
2.4.3
#4 lore raw

PATCH 3/3 ARM: dts: sun4i: Add dts file for iNet-1 based tablets

Quoted 7 lines · Hans de Goede

The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007.

This patch has been tested on both rev2 and rev5 of this board / these tablets.

Quoted 6 lines

It comes with a rtl8188cus usb wifi connected to ehci1, focal ft5406ee8 touchscreen connected to i2c2 addr 0x38, bosch bma 250 accelerometer connected to i2c1 addr 0x18 and the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot.

Queued, thanks!

Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150910/17c44469/attachment-0001.sig>
#5 lore raw

PATCH 1/3 ARM: dts: sun4i: Fix itead-iteaduino-plus reference in Makefile

In reply to Hans de Goede

Hi,

Quoted 3 lines · Hans de Goede

Tell make to build a dtb, rather then the already existing dts.

A patch to fix that have been sent already:
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-September/367989.html

It's queued for the 4.3 fixes.

Thanks!
Maxime

Signature · 10 lines
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150910/eee3d4af/attachment.sig>