sun4i: Add defconfig and dts for inet9f-rev03 based tablets
Subsystems (2)
PATCH 1/2 sun4i: Add defconfig and dts for inet9f-rev03 based tablets
The inet9f-rev03 pcb is specially designed for gaming tablets, such as the qware tb-g100 tablet.
These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides of the screen.
Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot.
The dts is identical to the dts submitted to the upstream kernel.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun4i-a10-inet9f-rev03.dts | 219 ++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 1 + configs/inet9f_rev03_defconfig | 20 +++ 4 files changed, 241 insertions(+) create mode 100644 arch/arm/dts/sun4i-a10-inet9f-rev03.dts create mode 100644 configs/inet9f_rev03_defconfig
arch/arm/dts/Makefile +1 -0
@@ -81,6 +81,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-inet-3f.dtb \ sun4i-a10-inet-3w.dtb \ sun4i-a10-inet97fv2.dtb \ + sun4i-a10-inet9f-rev03.dtb \ sun4i-a10-itead-iteaduino-plus.dtb \ sun4i-a10-jesurun-q5.dtb \ sun4i-a10-marsboard.dtb \
arch/arm/dts/sun4i-a10-inet9f-rev03.dts new file +219 -0
219 lines not on this page · raw message
board/sunxi/MAINTAINERS +1 -0
@@ -9,6 +9,7 @@ F: configs/Chuwi_V7_CW0825_defconfig F: configs/Cubieboard_defconfig F: configs/Hyundai_A7HD_defconfig F: configs/inet97fv2_defconfig +F: configs/inet9f_rev03_defconfig F: configs/jesurun_q5_defconfig F: configs/Mele_A1000_defconfig F: configs/Mele_M3_defconfig
configs/inet9f_rev03_defconfig new file +20 -0
@@ -0,0 +1,20 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_DRAM_CLK=408 +CONFIG_DRAM_EMR1=4 +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_USB0_ID_DET="PH4" +CONFIG_VIDEO_LCD_MODE="x:800,y:480,depth:24,pclk_khz:33000,le:45,ri:209,up:22,lo:22,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_USB_MUSB_HOST=y +CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet9f-rev03" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set
Signature · 1 line
2.4.3
PATCH 2/2 sun4i: Add dts and defconfig for iNet-1 based tablets
The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600 A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007.
This patch has been tested on both rev2 and rev5 of this board / these tablets.
These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot.
The dts is identical to the dts submitted to the upstream kernel.
--- arch/arm/dts/Makefile | 1 + arch/arm/dts/sun4i-a10-inet1.dts | 226 +++++++++++++++++++++++++++++++++++++++ board/sunxi/MAINTAINERS | 1 + configs/inet1_defconfig | 22 ++++ 4 files changed, 250 insertions(+) create mode 100644 arch/arm/dts/sun4i-a10-inet1.dts create mode 100644 configs/inet1_defconfig
arch/arm/dts/Makefile +1 -0
@@ -78,6 +78,7 @@ dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-gemei-g9.dtb \ sun4i-a10-hackberry.dtb \ sun4i-a10-hyundai-a7hd.dtb \ + sun4i-a10-inet1.dtb \ sun4i-a10-inet-3f.dtb \ sun4i-a10-inet-3w.dtb \ sun4i-a10-inet97fv2.dtb \
arch/arm/dts/sun4i-a10-inet1.dts new file +226 -0
226 lines not on this page · raw message
board/sunxi/MAINTAINERS +1 -0
@@ -8,6 +8,7 @@ F: configs/ba10_tv_box_defconfig F: configs/Chuwi_V7_CW0825_defconfig F: configs/Cubieboard_defconfig F: configs/Hyundai_A7HD_defconfig +F: configs/inet1_defconfig F: configs/inet97fv2_defconfig F: configs/inet9f_rev03_defconfig F: configs/jesurun_q5_defconfig
configs/inet1_defconfig new file +22 -0
@@ -0,0 +1,22 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN4I=y +CONFIG_DRAM_CLK=432 +CONFIG_DRAM_EMR1=4 +CONFIG_USB0_VBUS_PIN="PB9" +CONFIG_USB0_VBUS_DET="PH5" +CONFIG_USB0_ID_DET="PH4" +CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:24,pclk_khz:52000,le:32,ri:287,up:22,lo:12,hs:1,vs:1,sync:3,vmode:0" +CONFIG_VIDEO_LCD_POWER="PH8" +CONFIG_VIDEO_LCD_BL_EN="PH7" +CONFIG_VIDEO_LCD_BL_PWM="PB2" +CONFIG_VIDEO_LCD_PANEL_LVDS=y +CONFIG_DEFAULT_DEVICE_TREE="sun4i-a10-inet1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER" +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_MUSB_HOST=y
Signature · 1 line
2.4.3
PATCH 2/2 sun4i: Add dts and defconfig for iNet-1 based tablets
Quoted 9 lines · Hans de Goede
The iNet-tek iNet-1 PCB is a PCB found in various generic 10.1" 1024x600
A10 based tablets such as the Point of View Protab2 XXL and the Cherry M1007.This patch has been tested on both rev2 and rev5 of this board / these
tablets.
Quoted 6 lines
These tablets feature the usual connectors: headphone, mini hdmi, power-barrel, mini-usb and a micro-sd slot.
The dts is identical to the dts submitted to the upstream kernel.
Signed-off-by Hans de Goede <[email protected]>
PATCH 1/2 sun4i: Add defconfig and dts for inet9f-rev03 based tablets
In reply to Hans de GoedeQuoted 8 lines · Hans de Goede
The inet9f-rev03 pcb is specially designed for gaming tablets, such as
the qware tb-g100 tablet.These 7" tablets feature a dpad, firebuttons and 2 joysticks on the sides
of the screen.
Quoted 6 lines
Besides this they have the usual connectors: power-barrel, mini usb, mini hdmi, headphone and micro-sd slot.
The dts is identical to the dts submitted to the upstream kernel.
Signed-off-by Hans de Goede <[email protected]>