toshiba_acpi: Hotkey updates
Subsystems (2)
Azael Avalos
maintainercover toshiba_acpi: Hotkey updates
These two patches make some changes to the hotkeys code, the first patch unify the hotkey enabling code, and the second changes the default hotkey enabling parameter.
Azael Avalos (2):
toshiba_acpi: Unify hotkey enabling functions
toshiba_acpi: Change default Hotkey enabling value
drivers/platform/x86/toshiba_acpi.c | 38 +++++++++++++------------------------ 1 file changed, 13 insertions(+), 25 deletions(-)
Signature · 1 line
2.5.1
Azael Avalos
maintainerPATCH 1/2 toshiba_acpi: Unify hotkey enabling functions
Currently the driver has two functions enabling hotkeys support, but these two functions can be merged into one.
This patch merges these two functions, moving some checks to the *enable_hotkeys function, simplifying code in the process.
--- drivers/platform/x86/toshiba_acpi.c | 36 ++++++++++++------------------------ 1 file changed, 12 insertions(+), 24 deletions(-)
drivers/platform/x86/toshiba_acpi.c +12 -24
@@ -198,6 +198,7 @@ struct toshiba_acpi_dev { unsigned int panel_power_on_supported:1; unsigned int usb_three_supported:1; unsigned int sysfs_created:1; +unsigned int special_functions;bool kbd_led_registered;bool illumination_led_registered;
@@ -2253,7 +2254,16 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)if (ACPI_FAILURE (status))return -ENODEV ; - result =hci_write (dev,HCI_HOTKEY_EVENT ,HCI_HOTKEY_ENABLE ); +/* +* Enable the "Special Functions" mode only if they are +* supported and if they are activated. +*/ +if (dev->kbd_function_keys_supported && dev->special_functions) + result =hci_write (dev,HCI_HOTKEY_EVENT , +HCI_HOTKEY_SPECIAL_FUNCTIONS ); +else + result =hci_write (dev,HCI_HOTKEY_EVENT ,HCI_HOTKEY_ENABLE ); +if (result ==TOS_FAILURE )return -EIO ;else if (result ==TOS_NOT_SUPPORTED )
@@ -2262,20 +2272,6 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)return 0 ; } -static void toshiba_acpi_enable_special_functions (struct toshiba_acpi_dev *dev) -{ -u32 result; - -/* -* Re-activate the hotkeys, but this time, we are using the -* "Special Functions" mode. -*/ - result =hci_write (dev,HCI_HOTKEY_EVENT , -HCI_HOTKEY_SPECIAL_FUNCTIONS ); -if (result !=TOS_SUCCESS ) -pr_err ("Could not enable the Special Function mode\n" ); -} -static bool toshiba_acpi_i8042_filter (unsigned char data,unsigned char str,struct serio *port) {
@@ -2631,7 +2627,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev) {struct toshiba_acpi_dev *dev;const char *hci_method; -u32 special_functions;u32 dummy;int ret =0 ;
@@ -2673,7 +2668,7 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)* with the new keyboard layout, query for its presence to help * determine the keymap layout to use. */ - ret =toshiba_function_keys_get (dev, &special_functions); + ret =toshiba_function_keys_get (dev, &dev->special_functions); dev->kbd_function_keys_supported = !ret;if (toshiba_acpi_setup_keyboard (dev))
@@ -2748,13 +2743,6 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)print_supported_features (dev); -/* -* Enable the "Special Functions" mode only if they are -* supported and if they are activated. -*/ -if (dev->kbd_function_keys_supported && special_functions) -toshiba_acpi_enable_special_functions (dev); - ret =sysfs_create_group (&dev->acpi_dev->dev.kobj, &toshiba_attr_group);if (ret) {
Signature · 1 line
2.5.1
Re: [PATCH 1/2] toshiba_acpi: Unify hotkey enabling functions
Quoted 7 lines · Azael Avalos
Currently the driver has two functions enabling hotkeys support, but these two functions can be merged into one.
This patch merges these two functions, moving some checks to the
*enable_hotkeysfunction, simplifying code in the process.Signed-off-by Azael Avalos <[email protected]>
Queued to testing for 4.4.
Thanks Azael.
Signature · 2 lines
Darren Hart Intel Open Source Technology Center
Azael Avalos
maintainerPATCH 2/2 toshiba_acpi: Change default Hotkey enabling value
In reply to Azael AvalosThe driver currently uses the hotkey enabling value of 0x09 to enable hotkey events, but windows uses a different value (0x01).
All Toshiba laptops accept the following "hotkey" parameters:0x01 - Enable hotkey and system events.0x03 - Enable system events only.0x09 - Enable hotkey events only.0x0b - Disable (hotkey and system) events.
This patch changes the default hotkey enabling value from 0x09 to 0x01, enabling both the hotkey and system events.
--- drivers/platform/x86/toshiba_acpi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/platform/x86/toshiba_acpi.c +1 -1
@@ -131,7 +131,7 @@ MODULE_LICENSE("GPL");/* Field definitions */ #define HCI_ACCEL_MASK 0x7fff#define HCI_HOTKEY_DISABLE 0x0b -#define HCI_HOTKEY_ENABLE 0x09 +#define HCI_HOTKEY_ENABLE 0x01#define HCI_HOTKEY_SPECIAL_FUNCTIONS 0x10#define HCI_LCD_BRIGHTNESS_BITS 3#define HCI_LCD_BRIGHTNESS_SHIFT (16-HCI_LCD_BRIGHTNESS_BITS)
Signature · 1 line
2.5.1
Re: [PATCH 2/2] toshiba_acpi: Change default Hotkey enabling value
Quoted 9 lines · Azael Avalos
The driver currently uses the hotkey enabling value of
0x09to enable hotkey events, but windows uses a different value (0x01).All Toshiba laptops accept the following "hotkey" parameters:
0x01- Enable hotkey and system events.0x03- Enable system events only.0x09- Enable hotkey events only.0x0b- Disable (hotkey and system) events.
Quoted 4 lines
This patch changes the default hotkey enabling value from
0x09to0x01, enabling both the hotkey and system events.Signed-off-by Azael Avalos <[email protected]>
Queued to testing for 4.4.
Let me know if you were expecting 4.3....
Signature · 2 lines
Darren Hart Intel Open Source Technology Center
Azael Avalos
maintainerRe: [PATCH 2/2] toshiba_acpi: Change default Hotkey enabling value
Hi Darren,
2015-09-18 15:37 GMT-06:00 Darren Hart <[email protected]>:
Quoted 10 lines · Azael Avalos
Quoted 9 lines
The driver currently uses the hotkey enabling value of
0x09to enable hotkey events, but windows uses a different value (0x01).All Toshiba laptops accept the following "hotkey" parameters:
0x01- Enable hotkey and system events.0x03- Enable system events only.0x09- Enable hotkey events only.0x0b- Disable (hotkey and system) events.
Quoted 8 lines
Quoted 4 lines
This patch changes the default hotkey enabling value from
0x09to0x01, enabling both the hotkey and system events.Signed-off-by Azael Avalos <[email protected]>Queued to testing for 4.4.
Let me know if you were expecting 4.3....
Nope, just the first two fixes were meant for 4.3, the rest is 4.4 material, I just wanted to send them early.
Quoted 4 lines
--
Darren Hart
Intel Open Source Technology Center
Cheers
Azael
Signature · 1 line
-- El mundo apesta y vosotros apestais tambien --
Re: [PATCH 2/2] toshiba_acpi: Change default Hotkey enabling value
Quoted 16 lines · Azael Avalos
Hi Darren,
2015-09-18 15:37 GMT-06:00 Darren Hart <[email protected]>:
Quoted 13 lines · Azael Avalos
Quoted 12 lines
The driver currently uses the hotkey enabling value of
0x09to enable hotkey events, but windows uses a different value (0x01).All Toshiba laptops accept the following "hotkey" parameters:
0x01- Enable hotkey and system events.0x03- Enable system events only.0x09- Enable hotkey events only.0x0b- Disable (hotkey and system) events.This patch changes the default hotkey enabling value from
0x09to0x01, enabling both the hotkey and system events.
Quoted 8 lines
Quoted 5 lines
Quoted 1 line
Signed-off-by Azael Avalos <[email protected]>Queued to testing for 4.4.
Let me know if you were expecting 4.3....
Nope, just the first two fixes were meant for 4.3, the rest is 4.4 material, I just wanted to send them early.
OK, check mainline please, everything I plan to push for 4.3 is now there. Please confirm it has all you expected.
Signature · 2 lines
Darren Hart Intel Open Source Technology Center
Azael Avalos
maintainerRe: [PATCH 2/2] toshiba_acpi: Change default Hotkey enabling value
Hi Darren,
2015-09-18 16:14 GMT-06:00 Darren Hart <[email protected]>:
Quoted 21 lines · Azael Avalos
Quoted 20 lines
Hi Darren,
2015-09-18 15:37 GMT-06:00 Darren Hart <[email protected]>:
Quoted 17 lines · Azael Avalos
Quoted 9 lines
The driver currently uses the hotkey enabling value of
0x09to enable hotkey events, but windows uses a different value (0x01).All Toshiba laptops accept the following "hotkey" parameters:
0x01- Enable hotkey and system events.0x03- Enable system events only.0x09- Enable hotkey events only.0x0b- Disable (hotkey and system) events.Quoted 4 lines
This patch changes the default hotkey enabling value from
0x09to0x01, enabling both the hotkey and system events.Signed-off-by Azael Avalos <[email protected]>Queued to testing for 4.4.
Quoted 7 lines
Quoted 4 lines
Quoted 1 line
Let me know if you were expecting 4.3....
Nope, just the first two fixes were meant for 4.3, the rest is 4.4 material, I just wanted to send them early.
OK, check mainline please, everything I plan to push for 4.3 is now there. Please confirm it has all you expected.
Yup, everything is in there, thanks.
Signature · 1 line
-- El mundo apesta y vosotros apestais tambien --